Answer:
Divergent boundary on land
Explanation:
A rift valley is a lowland region that forms where Earth’s tectonic plates move apart (diverge), or rift. Rift valleys are found both on land and at the bottom of the ocean, where they are created by the process of seafloor spreading.
Rift valleys are created by tectonic activity and not the process of erosion.
Tectonic plates are huge, rocky slabs of Earth's lithosphere—its crust and upper mantle. Tectonic plates are constantly in motion—shifting against each other in fault zones, falling beneath one another in a process called subduction, crashing against one another at convergent plate boundaries, and tearing apart from each other at divergent plate boundaries.
The most well-known rift valley on Earth is probably the so-called "Great Rift Valley System" which stretches from the Middle East in the north to Mozambique in the south. The area is geologically active, and features volcanoes, hot springs, geysers, and frequent earthquakes.
Divergent boundary on land describes the boundary where earthquake activity occurs along rift valleys
for better understanding let's explain divergent plate boundary
Divergent plate boundary often happens only where 2 tectonic plates separate and thereafter create new land. most of them are in the ocean (Mid Atlantic Ridge). The Great Rift Valley in Africa is an example of a divergent plate boundary on thereafter the Great Rift Valley is filled of with water and product is a sea.Rift valley is commonly known as an area in a mid-ocean ridge where the plates are often separated and new crust begins to form. where plate tectonics exist, there is a divergent boundary or divergent plate boundary also called constructive boundary orfrom the above we can therefore say that the answer Divergent boundary on land describes the boundary where earthquake activity occurs along rift valleys, is correct
learn more about divergent plate boundary from:
https://brainly.com/question/21633828
The pressure of a gas in a cylinder when it is heated to a temperature of 250k is 1.5 atm. What was the initial temperature of the gas if it’s initial pressure was 1 atm?
Answer:
[tex]T1=166.66K[/tex]
Explanation:
According to Gay-Lussac’s law simply states that the ratio of the initial pressure and temperature is equal to the ratio of the final pressure and temperature for a gas of a fixed provided that the mass is kept at a constant volume.
Given:
Initial pressure, P1 = 1 atm
Final pressure, P2 = 1.5 atm
Final temperature, T2 = 250 K
The law can be applied using the below formula
P1T2 = P2T1
Then,
T1 = (P1T2)/P1 = (1*250)/(1.5) = 166.66 Kelvin.
[tex]T1=166.66K[/tex]
:
Answer:
[tex]T_1=166.7K[/tex]
Explanation:
Hello,
In this case, by applying the Gay-Lussac's law which help us to understand the pressure-temperature gas behavior via a directly proportional relationship:
[tex]\frac{P_1}{T_1} =\frac{P_2}{T_2}[/tex]
In such a way, as we are asked to compute the initial temperature knowing the initial pressure and final both temperature and pressure, so we solve for it:
[tex]T_1=\frac{T_2P_1}{P_2}=\frac{250K*1atm}{1.5atm} \\\\T_1=166.7K[/tex]
Best regards.
What are some true statements about light
Answer:It allows us to see things so we know where we are going that’s why at night we had lamp posts
Explanation:
In most mirrors, the virtual image appears to come from behind the mirror. True False
Answer
False
Explanation:
why is the international space station in orbit
Answer:
The ISS provides a location in the relative safety of low Earth orbit to test spacecraft systems that will be required for long-duration missions to the Moon and Mars.
Explanation:
What mass of chromium would be produced from the reaction of 57.0 g of potassium with 199 g of chromium(II) bromide according to the following reaction? 2 K + CrBr2 2 KBr + Cr *
Answer:
38g of Cr
Explanation:
Step 1:
The balanced equation for the reaction:
2K + CrBr2 —> 2KBr + Cr
Step 2:
Determination of the masses of K and CrBr2 that reacted and the mass of Cr produced from the balanced equation.
This is illustrated below:
Molar mass of K = 39g/mol
Mass of K from the balanced equation = 2 x 39 = 78g
Molar Mass of CrBr2 = 52 + (80x2) = 212g
Mass of CrBr2 from the balanced equation = 1 x 212 = 212g
Molar Mass of Cr = 52g/mol
Mass of Cr from the balanced equation = 1 x 52 = 52g
From the balanced equation above,
78g of K reacted with 212g of CrBr2 to produce 52g of Cr.
Step 3:
Determination of the limiting reactant.
This is illustrated below:
From the balanced equation above,
78g of K reacted with 212g of CrBr2.
Therefore, 57g of K will react with = (57 x 212)/78 = 154.92g of CrBr2.
From the above calculation, we can see that a lesser mass (i.e 154.92g) than what was given ( i.e 199g) of CrBr2 is needed to react completely with 57g of K. Therefore, K is the limiting reactant and CrBr2 is the excess reactant.
Step 4:
Determination of the mass of Cr produced by the reaction.
In this case, the limiting reactant will be use because it will give the maximum yield of Cr as all of it is used up in the reaction process. The limiting reactant is K and the mass of Cr produced is obtained as follow:
From the balanced equation above,
78g of K reacted to produce 52g of Cr.
Therefore, 57g of K will produce = (57 x 52)/78 = 38g of Cr.
Therefore, 38g of Cr is produced from the reaction.
1 point
If the pressure in a cylinder is 1 atm and the volume is 0.725 liters, then
what is the pressure when the volume is decreased to .075 liters (at
constant temperature)? *
2.5 atm
5 atm
5 atm
9.7 atm
O
13.2 atm
Answer:
9.7 atm.
Explanation:
The following data were obtained from the question:
Initial pressure (P1) = 1 atm
Initial volume (V1) = 0.725 L
Final volume (V2) = 0.075 L
Final pressure (P2) =?
The final pressure can be obtained by using the Boyle's law equation since the temperature is constant. This is illustrated below:
P1V1 = P2V2
1 x 0.725 = P2 x 0.075
Divide both side by 0.075
P2 = 0.725 / 0.075
P2 = 9.7 atm.
Therefore, the new pressure is 9.7 atm.
In the water cycle diagram above, which letter represents
groundwater?
Select One:
Q
S
T
R
Answer:t
Explanation:bc
is it true that Different atoms of an element have the same number of protons.
Answer:
No.
Explanation:
All the elements have the different number of protons .
Answer:
no it is not true because atoms may have the same number of neutrons but they never have the same number of protons
Explanation:
What is the name for a star that has two shells of hydrogen and helium undergoing fusion?
A.
asymptotic giant branch star
B.
supergiant
C.
hypergiant
D.
supernova
Answer:
I am not so sure but I think it is A.
Explanation:
If i got it wrong sorry.... :(
Answer:
the answer is A hope it helps
In the graph above for the dissociation of a strong acid, why do the bars for H3O+ and A- have the same height as the bar for HA?
Answer:
The concentration of HA is the same as concentration of H3O+ and A- produced.
Explanation:
The dissociation equation is given below:
HA(aq) + H2O (l) —> H3O+(aq) + A-(aq)
From the reaction above, we can see that the acid is monoprotic acid i.e it has only 1 ionisable hydrogen atom.
Now, from the balanced equation, we can see that the acid produced equal concentration of H3O+ and A-.
This account for the reason why the bars for H3O+ and A- have the same height as the bar for HA.
If I add water to 100mL of a 0.15M NaOH solution until the final volume is 150mL, what will the molarity of the diluted solution be?
A. 0.100M
B. 1.2M
C. 0.01M
D. 52.8M
Answer : A
0,15 moles of NaOH -------in-------1000ml
x moles of NaOH ---------in-------100ml
x= 0,015 moles of NaOH
final volume =150ml
0,015 moles of NaOH -------in------150ml
x moles of NaOH ------in--------1000ml
x= 0,1 moles of NaOH
HELPPPP PLEASEEEE NAME THESE MOLECULES PLEASEEE
Answer:
1. carboxylic acid
2. ether
3. aldehyde
4. ketone
5. amine
6. alcohol
Explanation:
Know the functional groups. If you would like me to teach you them let me know.
- Hope that helps! Please let me know if you need further explanation.
One of the biggest news stories of 1996 was the successful cloning of Dolly the sheep. Dolly was the first mammal cloned from an adult body cell. At first, Dolly appeared to be perfectly healthy. However, she died at age 6 of cancer. Dolly’s early death made scientists wonder whether cloned animals age faster than normal. A small flock of sheep cloned from Dolly have been observed since 2007. Happily, these clones show no sign of early aging. Choose the best option to complete the sentence. Scientists worried that cloned animals would age rapidly because their cells contain __________________ as old as the individual they were cloned from.
Answer:
I believe the answer you're looking for is DNA, not sure though
What is similar about igneous rock and metamorphic rock formation?
Answer:
I think they both need heat.
Explanation:
The combustion of 0.1240 kg of propane in the presence of excess oxygen produces 0.3110 kg of carbon dioxide. What is the limiting reactant?
PLEASE I REALLY NEED HELP!!!!
Answer:
The limiting reactant is the propane gas, C₃H₈ while the percentage yield is 83.77%
Explanation:
Here we have
Propane gas with molecular formula C₃H₈, molar mass = 44.1 g/mol combining with O₂ as follows
C₃H₈ + 5O₂ → 3CO₂ + 4H₂O
Therefore, 1 mole of C₃H₈ combines with 5 moles of O₂ to produce 3 moles CO₂ and 4 moles of H₂O
Mass of propane = 0.1240 kg = 124.0 g
Number of moles of propane = mass of propane/(molar mass of propane)
The number of moles of propane = 124/44.1 = 2.812 moles
The molar mass of CO₂ = 44.01 g/mol
Mass of CO₂ = 0.3110 kg = 311.0 g
Therefore, number of moles of CO₂ = mass of CO₂/(molar mass of CO₂)
The number of moles of CO₂ = 311.0 kg/ 44.01 g/mol = 7.067 moles
Therefore, since 1 mole of propane produces 3 moles of CO₂, 2.812 moles of propane will produce 3 × 2.812 moles or 8.44 moles of CO₂
Therefore;
The limiting reactant is the propane gas, C₃H₈, since the oxygen is in excess
Hence
[tex]The \ percentage \ yield = \frac{Actual \, yield}{Theoretical \, yield} \times 100 = \frac{7.067}{8.44} \times 100 = 83.77 \%[/tex]
The percentage yield = 83.77%.
In general, when a substance changes from a solid to a liquid,
A.
the density of the substance increases.
B.
the substance no longer has density since density is a property only solids have.
C.
the density of the substance decreases.
D.
the density of the substance remains the same.
Answer:
c,density is the measure of compactness in a substance. Liquid particles are close together however they aren't as close as the particles in solids.
I have 345mL of a 1.5M NaCl solution. If I boil the water until the volume of the solution is 250mL, what will the molarity of the solution be?
A. 28.5M
B. 1.07M
C. 2.07M
D. 1.5M
Which 1.0 M solution has the lowest pH?
A.
HCN
B.
H3PO4
C.
H2C2O4
D.
HCl
how did buddhism spread to china?
Answer:
It is widely believed that Buddhism entered China via the Silk Road under the Han Dynasty. After trade and travel was established with the Yuezhi, who by that time were forced southward toward India, Yuezhi monks began to travel with the merchant caravans; preaching their religion along the Silk Road.
Explanation:
i got this from google
If the following weights have masses of 2, 4, 6 and 8 kg,
respectively, and they are at the same temperature, which one
will transfer more heat if they are all placed in cold water to
cool down? Explain.
Unit is calorimetry
Answer:
8 kg mass
Explanation:
As we can see in the image the weight of mass 8 kgs has a large surface area as compared to the surface area of other masses. In general, it has been observed that a wide surface area has more surface particle for heat conduction. Hence, the rate of heat transfer is directly proportional to the surface area of heat conducting surface. Thus, the larger the surface area, the faster is the rate of heat conduction.
Hence, weight of mass 8Kg wil transfer heat a fast rate.
Explain in your own words, why can’t we predict earthquakes?
what 3 classes of compounds are elecrolytes
Answer:
i believe it is strong acids, strong bases, and salts.
Explanation:
Hope this helps : )
what is the correct formula for the compound platinum (vi) flouride?
Answer: PtF6
Explanation: is one of seventeen known binary hexafluorides.
If we start with 1.000g of strontium 90 0.953 grams will remain after 2.0 years (a) what is the half life of strontium 90 (b) how much strontium 90 will remain after 5.00 years Please show the necessary step
Answer:
a) 29.0 years
b) 0.89 g
Explanation:
Using the formula
t1/2= t×ln2/ln(No/Nt)
Where
Nt= mass of radioactive isotope at time= t =0.953g
No= initial mass of radioactive isotope present= 1.000g
t= time taken for N mass of radioactive isotope to remain = 2 years
t1/2 = half-life of radioactive isotope= ???
Substituting the values
t1/2= 2 × ln2/ln(1.000/0.953)
t1/2= 2× 0.693/0.048
t1/2= 29 hours
b)
N= No(1/2)^t/t1/2
Where t= 5 years
N= 1.000(1/2)^5/29
N= 1.000(1/2)^0.17
N= 0.89g
When does boiling occur?
Water boils at 100 Degrees Celsius or 212 degrees Fahrenheit
46g of a mineral contained 16g copper, 14g iron and 16g sulphur. Calculate the empirical
formula of the mineral.
Answer:
CuFeS2
Explanation:
Calculate the moles of each substance by doing moles= mass/relative atomic mass. you should get 0.25 moles of copper and iron and 0.5 moles of sulfur. Then divide all of those numbers by 0.25 (as its the lowest value) you should get 1 for copper and iron and 2 for sulfur. This represents the ratio that they are in within the mineral.
Most solutions are ___ solutions.
A heterogeneous
B saturated
C static
D unsaturated
Answer:
the answer is A heterogeneous solutions
Explanation:
Mixtures in two or more phases are heterogeneous mixtures. Examples include ice cubes in a drink, sand and water, and salt and oil. The liquid that is immiscible form heterogeneous mixtures. A good example is a mixture of oil and water.Jun 26, 2019
For the following reaction, if you have 13.2 g of CO and 42.7g of Fe2O3, which is the limiting reagent with regards to Fe production?
Fe2O3 (s) + 3 CO (g) _______> 2 Fe (s) + 3 CO2 (g)
Answer: [tex]CO[/tex] is the limiting reagent and [tex]Fe_2O_3[/tex] is the excess reagent.
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} Fe_2O_3=\frac{42.7g}{159.69g/mol}=0.267moles[/tex]
[tex]\text{Moles of} CO=\frac{13.2g}{28g/mol}=0.471moles[/tex]
The given balanced equation is :
[tex]Fe_2O_3(s)+3CO(g)\rightarrow 2Fe(s)+3CO_2(g)[/tex]
According to stoichiometry :
3 moles of [tex]CO[/tex] require = 1 mole of [tex]Fe_2O_3[/tex]
Thus 0.471 moles of [tex]CO[/tex] will require=[tex]\frac{1}{3}\times 0.471=0.157moles[/tex] of [tex]Fe_2O_3[/tex]
As given amount of [tex]Fe_2O_3[/tex] is more than the required amount , it is the excess reagent.Thus [tex]CO[/tex] is the limiting reagent as it limits the formation of product.
How many grams of H20 will be formed when 32.0 g H2 reacts with 16.0 g
O2? *
2H2 + O2 + 2H2O
9.00 g
16.0 g
18.0 g
32.0g
Answer:
18.0 g
Explanation:
M(H2) = 2.0 g/mol
32.0g * 1 mol/2 g= 16 mol H2
M(O2) = 32 g/mol
16.0 g * 1mol/32 g= 0.5 mol O2
2H2 + O2 ---> 2H2O
from reaction 2 mol 1 mol
given 16 mol 0.5 mol
We see that O2 is a limiting reactant.
2H2 + O2 +-------> 2H2O
from reaction 1 mol 2 mol
given 0.5 mol x mol
x =(0.5*2)/1= 1 mol H2O
M(H2O)= 18 g/mol
18 g/mol* 1 mol = 18 g H2O
What type of elements are ionic bonds composed of?
Answer:
A metal and a nonmetal
Explanation:
Picture NaCl, the most famous example of an ionic compound. Two ions, Na+ (sodium) and Cl- (chlorine) are joined by an ionic bond.
Sodium, the metal, gives up an electron to chlorine.
Chlorine, the nonmetal, accepts an electron from sodium.
That way both have 8 electrons in their outer shell! This is the way ionic bonds function.
