when you turn on music on your phone, what energy transformation takes place ?

Answer:

the final statements the correct one is. The second

The iron piece exerts a force of 1 N on the magnet in the opposite direction

Explanation:

In this exercise they give us the force exerted by a magnet on an iron bar and ask us the force that the iron bar exerts on the magnet. We can see that these are action and reaction forces, which by Newton's third law must be of equal magnitude and opposite direction, each applied to one of the bodies.

the final statements the correct one is. The second

The iron piece exerts a force of 1 N on the magnet in the opposite direction

Answer:

True

Explanation:

This is in fact what the Archimedes principle states, and what he used in the famous anecdote about finding if  the crown of the King was really made of gold.

Answer:

a) 0.73A

b) 0.23A

c) 2.76V

Explanation:

We need to first resolve the two resistors in series. The resistors in series are

12 Ω and 3 Ω  AND 6 Ω and 3 Ω

For  12 Ω and 3 Ω in series, total effective resistance =  12 Ω + 3 Ω = 15 Ω

For  6 Ω and 3 Ω in series, total effective resistance =  6 Ω + 3 Ω = 9 Ω

Since the equivalent series resistors i.e 15Ω ND 9Ω are connected in parallel, the total effective resistance Rt will be expressed as;

1/Rt = 1/15+1/9

1/Rt = (3+5)/45

1/Rt = 8/45

Rt = 45/8 Ω

a) If a potential difference of 4 V is applied across it, the total current I in the circuit can be derives using the ohms law.

According to the law E = IRt

Given E = 4V, Rt = 45/8

I = E/Rt

I = 4/(45/8)

I = 4 * 8/45

I = 32/45

I = 0.73A

Hence, the current drawn from the battery is 0.73A

b) Before we can calculate the current in the 12Ω resistor, we need to calculate the current in the equivalent resistance of 15Ω(sum of 12Ω and 3Ω)

Current in the 15Ω resistor = Voltage across the 15Ω resistor/Resistance

Current in the 15Ω resistor = 4/15

Current in the 15Ω resistor = 0.27A

Since the same current flows in a series connected resistors, hence the correct in the 12ohms resistor is also 0.27A.

c) Before we can calculate the pd across the 6ohms resistor, we need to know the voltage across the effective resistance of 9ohms(6ohms+3ohms). The pd across the 9ohm resistance will be the same as the source voltage i.e 4Volts.

We will need to share this 4volts between the 6ohms and the 3ohms using ohms law.

According to the law, V = IR

For the 6ohms resistor, voltage across it will be;

V = (0.73-0.27)×6

V= 0.46×6

V = 2.76Volts.

Hence the voltage across the 6ohms resistor is 2.76V.

Explanation:

Hello there!!!

You just need to use simple formula for force and momentum,

F= m.a

and momentum (p)= m.v

where m= mass

v= velocity.

a= acceleration .

And the solutions are in pictures.

Hope it helps..

Answer:

The correct answers are 2, 4

Explanation:

The dispersion of light occurs due to the interaction of electromagnetic radiation with matter, let's analyze the phenomenon, when a ray of light reaches a particle is absorbed and subsequently re-emitted in all directions, for radiation of lower wavelength (higher frequency ) the highest absorptions and therefore the missionary also the highest; An example of this is the blue light from the atmosphere, which is the absorption of blue light and its subsequent re-emission

Based on this explanation, the dispersion in gas particles or molecules is proportional to the frequency of the light (inversely proportional to the wavelength) and is also proportional to the number of dispersing particles in the air, that is, to the total volume of the particles. dispersers.

The correct answers are 2 and 4

Answer:

The correct answer is

Explanation:

Character 1: Why are these comic books so hard to read? Can u read them?

Character 2: No it's easy to read Tigger. It's because you are an animal an I am a human being. U don't know how to read.

Hope this helps....

Have a nice day!!!!

Answer:

Dialogue 1:

Hey buddy! Can you tell me what is written in this book? Its really hard to read:(

Dialogue 2:

Yeah! Its a story about a friendly tiger! And it is hard for you to read cause you don't know how to read.

Tip:

Try to make it more engaging  :)

Answer:

The velocity and direction after 1 second is 8.1 m/s downwards

Explanation:

The equation of motion for an object in free fall can be written as follows;

v = u + g×t

Where;

v = The final velocity of the object

u = The initial velocity of the object = 0 m/s

g = The acceleration due to gravity = 9.81 m/s²

The velocity after one second is given by the velocity equation as follows;

v = 0 + 9.81 m/s² * 1 s = 9.81 m/s

The direction of the is downwards due to the attraction by the Earth's gravitational field which acts towards the Earth's center

Therefore, the velocity and direction after 1 second is 8.1 m/s downwards.

Answer:

(B) Parachutes

Explanation:

Air resistance works to slow down trains and airplanes, so it isn't desirable.  Air resistance also causes pendulums to slow and stop.

Parachutes need air resistance to slow a person's fall.  So air resistance is desirable here.

Answer:

B i answered it it it

Explanation:

Answer:

0 m/s

Explanation:

Average velocity is displacement over time.

v_avg = Δx / Δt

Displacement is the distance between the start and the finish.

The circumference of the track is:

C = 2πr

C = 2π (7 m)

C ≈ 44 m

The distance covered by the object is:

d = vt

d = (11 m/s) (8 s)

d = 88 m

So the object travels 2 circumferences, meaning it ends back where it started.  Therefore, the displacement is 0 m, and the average velocity is 0 m/s.

Answer:

С. a single component that can't be separated

Explanation:

Substance : It is the pure form of matter or we can say that it is a matter that contains only one type of molecule of atom. It can not be separated by physical process.

For example : Water is a substance.

Mixture : It is a combination of different type of atoms or molecules and it is an impure form.

For example : Sodium chloride with water is a mixture.

Hence, the correct option is, (C) a single component that can’t be separated.

A substance is a single component that can't be separated by the physical process therefore the correct answer is option C.

A chemical compound is a mixture of two or more chemical components, whether they are related or unrelated.

For instance, the molecular H2O is composed of one hydrogen atom and two oxygen atoms.

For instance, water is a material that cannot be physically divided yet may be separated using electrolysis.

Mixture: This impure form is made up of several different kinds of atoms or molecules.

A mixture is, for instance, sodium chloride and water.

As a result, (C), a single, irreducible component, is the right answer.

To learn more about a chemical compound here, refer to the link;

brainly.com/question/12166462

#SPJ2

Answer:

Magnitude of Force : 0.8 N

Explanation:

We know that the velocity of this particle changes from 15ms⁻¹, or in other words 15m / s, to the respective velocity 25m / s over the course of 2.5 seconds. Given this information we can determine the acceleration of the particle,

a = v₁ - v₂ / t = 25 - 15 / 2.5 = 10 / 2.5 = 4m / s²

Knowing the acceleration we can calculate the magnitude of the force using the formula f = ma - Newton's second law of motion,

f = m [tex]*[/tex] a = 200g [tex]*[/tex] 4m / s² = 800 g [tex]*[/tex] m / s²

Remember however that Newtons are in the standard units kg [tex]*[/tex] m / s². Therefore we have to convert 800 g to kg to receive our solution,

800 g = 800 / 1000 kg = 0.8 kg,

Magnitude of Force = 0.8 N ; Solution = Option B

Answer:

2.5 m/s

Explanation:

The speed of a wave can be found using the following formula.

v= λ * f

where  λ is the wavelength in meters (m) and f is the frequency of the wave in Hertz (Hz).

We know the wavelength is 0.5 m and the frequency of the wave is 5 Hz.

Therefore,

λ= 0.5 m

f = 5 Hz

v= 0.5 * 5

Multiply 0.5 by 5, or divide 5 by 2.

0.5 * 5= 2.5     or      5/2=2.5

v= 2.5

Add appropriate units. The units for wave speed are m/s (meters per second).

v= 2.5 m/s

The speed of the wave is 2.5 meters per second.

Answer:

[tex]1.5 * 10^6[/tex]

Explanation:

Given

Digit: 1,500,000

Required

Represent using scientific notation

We start by expressing the given digit as a product of 1.5 and a multiple of 10

[tex]Digit = 1.5 * 1,000,000[/tex]

1,000,000 can be represented as 10⁶

So; the digit becomes

[tex]Digit = 1.5 * 10^6[/tex]

Hence, the scientific notation of 1,500,000 is 1.5 * 10⁶

Answer:

Sound travels fastest through solids.

Explanation:

This is because molecules in a solid medium are much closer together than those in a liquid or gas, allowing sound waves to travel more quickly through it. In fact, sound waves travel over 17 times faster through steel than through air.

Sound waves move the fastest through the solid. The speed of the sound wave  in the liquid and gas is low,

A sound wave is produced when a medium begins to vibrate. When an entity vibrates, a pressure wave is formed, which causes sound.

Solids transmit sound the fastest. Because the molecules in a solid medium are much closer together than in a liquid or gas, sound waves can move through it much faster.

Hence, sound waves move the fastest through the solid.

To learn more about the sound wave, refer to the link;

https://brainly.com/question/11797560

#SPJ2

Answer:

the partial pressure of nitrogen after the air has been heated is 2.61atm

Explanation:

Using combined gas law which is the combination of Boyle's Law and Charles' Law, and it gives The relationship between pressure, volume, and absolute temperature

PV/T= K

P1₁V₁/T₁=P₂V2₂/T₂

P₂=final pressure= ?

P₁= initial pressure=2.45 atm

.T₁= initial temperature= 273k

T₂= final temperature= 550 K,

We can make P₂ subject of the formula then we have

P₂=P₁V₁T₂/T₁T₂

=( 2.45×8×550)/(273×11.8)

P2=3.35atm

Now we can calculate the partial pressure of N₂

N₂= 3.35×(78.08/10)

=2.61atm

Therefore, the partial pressure of nitrogen after the air has been heated is 2.61atm

Explanation:

Hi, there!!

Energy is defined as the capacity or ability to do work. It's SI unit is Joule.

here,

Joule = (kg×m×m)/(s×s)

= kg×m^2/s^2.

Therefore, the derived unit is kg.m^2 by s^2.

Hope it helps...

Answer:

the force applied to restore a spring to its original length

Explanation:

Answer:

A person climbs a set of stairs

Explanation:

Potential energy is said to be possessed by an object due to its position. As the height from the ground level increase, the potential energy increases. It is calculated by the below formula as :

P = mgh

Out of the given options, the option that illustrates an increase in potential energy is option (b) i.e. a person climbs a set of stairs. As he steps one stair, its position from ground increases. It means its potential energy increases.

Answer:

1 Watt

Explanation:

Power (P) = w / Δt

w = work done

Δt = change in time

Power (P) = 60kg / 60 seconds

Power (P) = 1 Watt

Answer:

The answers to your questions are given below

Explanation:

A. Definition of momentum.

Momentum of an object can be defined as the product of the mass of the object and its velocity. Mathematically, it expreessed as:

Momentum = mass x Velocity

From the above equation, we can derive the SI unit of momentum as follow:

Mass is measured in Kilogram (Kg)

Velocity is measured in meter per second (ms¯¹).

Momentum = mass x Velocity

Momentum = Kg x ms¯¹

Momentum = Kg•ms¯¹

Therefore, the SI unit of momentum is Kg•ms¯¹.

Bi. Determination of the force of the body from O to A.

Mass (m) = 5 kg

Velocity (v) = 40 ms¯¹

Time (t) = 2 secs.

Force (F) =?

Next, we shall determine the acceleration of the body.

Acceleration (a) = Velocity (v) /Time (t)

a = v /t

Velocity (v) = 40 ms¯¹

Time (t) = 2 secs.

Acceleration (a) =.?

a = v/t

a = 40/2

a = 20 ms¯²

Now, we can obtain the force as follow:

Mass (m) = 5 kg

Acceleration (a) = 20 ms¯²

Force (F) =?

Force (F) = mass (m) x Acceleration (a)

F = ma

F = 5 x 20

F = 100 N

Therefore, the force of the body from O to A is 100 N.

Bii. Determination of the force of the body from B to C.

Mass (m) = 5 kg

Velocity (v) = 40 ms¯¹

Time (t) = 10 – 6 = 4 secs.

Force (F) =?

Next, we shall determine the acceleration of the body.

Acceleration (a) = Velocity (v) /Time (t)

a = v /t

Velocity (v) = 40 ms¯¹

Time (t) = 4 secs.

Acceleration (a) =.?

a = v/t

a = 40/4

a = 10 ms¯²

Now, we can obtain the force as follow:

Mass (m) = 5 kg

Acceleration (a) = 10 ms¯²

Force (F) =?

Force (F) = mass (m) x Acceleration (a)

F = ma

F = 5 x 10

F = 50 N

Therefore, the force of the body from B to C is 50 N.

Answer:

22.73 m/s or 81.72 kph

Explanation

We can find the combined mass of both cars as

970 kg + 2300 kg = 3270 kg.

Then the normal force of the cars can be calculated as

F(n)= mg

Where g is acceleration due to gravity 9.8m/s^2

3270 kg ×9.8 = 32046 kg*m/s^2.

coefficient of kinetic friction between tires and road to be 0.80 × F(n)

Then the frictional force can be calculated as

= (32046kg*m/s^2 × 0.80 )

= 25636.8 kg*m/s^2

We can now calculate the work done that was used stopping the cars as

Frictional force × distance

(25636.8 kg*m/s^2 ) × 2.9m= 74346.72kg*m^2/s^2

From kinetic energy formula, the combined velocity of the car can be determined

E=0.5 M V²

√(2E/M) = V

√(2*74346.72kg*m^2/s^2 / 3270 kg) = V

V= √ (45.472)

V=6.743293m/s

the momentum of both cars can be determined as

6.743293m/s * 3270 kg

= 22050.57kg*m/s

Now the final momentum of both cars must be equal to the the momentum of

the sports car just prior to the collision. Therefore, the speed of the sports car at impact.

=(22050.57 kg*m/s) / 970 kg = 22.73 m/s

We can convert that to km/h.

22.73 m/s * 3600 s/h / 1000 m/km = 81.72 kph

Answer:

The comic microwave background

Explanation:

The cosmic microwave background is said to be part of the remnant of the Big Bang that happened which resulted in the formation of the universe. This is because the universe was thought to be a very hot place which resulted in the expansion of it.

The heat was said to have resulted in the cooling of gases present and the remnant of the heat is what formed the radiation called the cosmic wave background.

Answer:

Principle Archimedes is applied in building a ship and submarine using the manipulating that buoyancy, is controlled the ballast tank system.

Explanation:

Submarine is rather had they focused on main parts of the submarine,he is complex and long process implementation,the most submarine design like submarine stability.

Submarine stability is complete and the fundamental Archimedes principle to arrive the weight of submarine is equal to buoyancy force.

Submarine into the parts and components of ballast tank the sequence in diving and surfacing,there two vital parts:-  flood parts and air vents

flood parts:- at the bottom position and allow water to enter or leave that tank.

air vents:- air vents at the top of the pressure hall,and that they submarine dive.

this time submarine is most modern system is depth is 300 to 450 meters,high pressure  air is 15 bar is tank air valve.

submarine is basic of the effective volume of all the submarine surfaced condition,submarine minus to the free water flood is equal to the fully pressure hull,submarine is the surfaced condition.

Explanation:

nitrogen fixation is the process by which nitrogen gas form the atmosphere is converted into different compound that can be used by plants and animal. there are three major ways in which this happens: first, by lightning, second by industrial methods and finally by bacteria living in the soil.

Answer:

1. option a

2. option d

Explanation:

HOPE IT HELPS YOU

Answer:

[tex]\phi=1.56\times 10^{-5}\ Wb[/tex]

Explanation:

Given that,

Emf, V = 22 mV

Number of turns in the coil us 519

Rate of change of current is 10 A/s.

We need to find the magnetic flux through each turn of the coil at an instant when the current is 3.70 A.

Let's find the inductance first. So,

[tex]L=\dfrac{\epsilon}{(dI/dt)}\\\\L=\dfrac{0.022}{10}\\\\L=0.0022\ H[/tex]

We have,

[tex]L=\dfrac{N\phi}{I}[/tex], [tex]\phi[/tex] is magnetic flux

[tex]\phi=\dfrac{LI}{N}\\\\\phi=\dfrac{0.0022\times3.7}{519}\\\\\phi=1.56\times 10^{-5}\ Wb[/tex]

So, the magnetic flux is [tex]1.56\times 10^{-5}\ Wb[/tex].

Answer:

V = 26.6 volts

Explanation:

Let Initial Potential Difference be V.

Charge (Q) accumulated in 30 mF Capacitor =

Q = C * V

Q= 30 * V

Now, Common Potential after connecting to uncharged 10mF capacitor in parallel = 20 Volt

Total Charge =Total Capacity * Common Potential

30 * V = ( 30 + 10) * 20

V = 26.6 volts

The unknown potential across the 30-µF capacitor is 6.67 V.

The given parameters;

Since the potential difference between the two capacitors are different, the two capacitors are in series connection.

In series circuit arrangement, the quantity of charge flowing in each capacitor is the same.

[tex]Q_{30\ \mu F} = Q_{10 \ \mu F}[/tex]

[tex]Q_{10 \ \mu F} = CV = 10\times 10^{-6} \times 20 = 0.0002 \ C[/tex]

The potential difference are different and the total potential is given as;

[tex]V_{T} = V_1 + V_2\\\\V_1 = \frac{Q}{C_1} \\\\V_2 = \frac{Q}{C_2} \\\\V_1+V_2 = \frac{Q}{C_1} + \frac{Q}{C_2}\\\\V_1 + V_2 = Q(\frac{1}{C_1} + \frac{1}{C_2} )\\\\V_1 + 20 = Q(\frac{1}{C_1} + \frac{1}{C_2} )\\\\V_1+ 20 = \frac{Q(C_2+ C_1)}{C_1 C_2} \\\\V_1 = \frac{Q(C_2+ C_1)}{C_1 C_2} - 20[/tex]

[tex]V_1 = \frac{0.0002(10\times 10^{-6}\ + \ 30\times 10^{-6})}{(30\times 10^{-6}) (10\times 10^{-6})} - 20\\\\V_1 = \frac{8\times 10^{-9}}{3\times 10^{-10}} - 20\\\\V_1 = 26.67 - 20\\\\V_1 = 6.67 \ V[/tex]

Thus, the unknown potential across the 30-µF capacitor is 6.67 V.

Learn more here:https://brainly.com/question/23899758

Answer:

a) increases

Explanation:

Almost all substance or material undergoes expansion due to heating. Heat gives thermal energy to the molecules of a substance increasing their body temperature. The temperature of a substance is the measure of the average kinetic energy of the molecules of that substance. When the temperature of a substance increases, the molecules begin to agitate and try to move far from each other, leading to either a linear, area, or cubic expansion, or all three of them. Metals like copper expand very well on heating, and their expansion is relatively minute, but very observable. When the face of such a copper is scratched to give and angle, heating the copper uniformly will cause the copper to expand, leading to an increase in the angle formed.

Answer:

266. 4

Explanation:

acceleration due to vravity on earth is 10m/s.

One third of it is (1/3)*10

=3.333m/s.

Weight is mass × acceleration

weight= 80kg÷ 3.333m/s

W= 266.4 Newton.

Answer:

Thomson’s model

Explanation:

Thompson regarded the atom largely as a sphere of positively charged matter in which negative charges were embedded.

This came to be known as the plum pudding model of the atom because it resembles a pudding studded with currants.

This was an early model of the atom and did not survive further experimental scrutiny of the structure of the atom.

Answer:

Thompsons model

Explanation:

i got it right on the quiz