When the motion of one or both of the particles is at an angle to the line of impact, the impact is said to be ________

Answers

Answer 1

Answer: Oblique impact

Explanation:

When the motion of one or both of the particles is at an angle to the line of impact, the impact is said to be oblique impact.

On the other hand, when the directions of motion of the two colliding particles are moving along a line of impact, then it's refered to as central impact.


Related Questions

Give reason Pascal is a derived unit​

Answers

Answer:

Pascal is a derived unit because it cannot be expressed in any physics terms, but it is an expression of fundamental quantities.

Explanation:

[tex]{ \sf{Pasacal \: ( Pa) = \frac{newtons}{metres {}^{2} } }} \\ \\ { \sf{Pasacal \: (Pa) = \frac{kg \times {ms}^{ - 2} }{ {m}^{2} } }}[/tex]

why do the other animals listen to old major speak in the barn late on night?​

Answers

https://brainly.com/question/19388823

Hope this helps!

A flat, circular, copper loop of radius r is at rest in a uniform magnetic field of magnitude B that extends far beyond the edge of the loop. The plane of the loop is parallel to the page and the magnetic field is directed perpendicular to and out of the page, as indicated by the blue dots. If the magnitude of the magnetic field is decreased at a rate of 1 T/s, what is true about the induced current in the copper loop

Answers

Answer:

     i =[tex]- \frac{r \ A'}{2 \ rho}[/tex] ,  i =  0.92   A

Explanation:

This exercise asks for the electromotive force, which can be calculated with Faraday's law

          fem = [tex]- \frac{d \Phi_B }{dt}[/tex]

where the magnetic flux

          Ф = B. A

bold letters indicate vectors. We can write this equation

          Ф = B A cos θ

In this case the magnetic field is perpendicular to the page and the normal to the loop of the loop is also parallel to the page, therefore the angle is zero and the cosine is 1

the loop is

          A = π r²

we substitute in the first equation

          fem = - π r² [tex]\frac{dB}{dt}[/tex]

we substitute the values

          fem = -π r² 1

          fem = - π r²

to calculate the current let's use ohm's law

           V = i R

            R = ρ L / A'

where A 'is the area of ​​the wire and L is the length of the loop

            L = 2π r

           

            V = i (ρ 2π r / A ')

            I = [tex]\frac{V \ A'}{2\pi \ r \ rho}[/tex]

         

In this case

           V = fem

 

           I = fem / R            

           i =[tex]- \frac{r \ A'}{2 \ rho}[/tex]

         

In order to complete the calculation, you need the radius of the loop and / or the wire cutter.

if we assume that the loop has a radius of r = 1 cm = 0.01 m and an area of ​​the wire   A'= π 10⁻⁶ m²   a radius of the wire 1 mm

           i = - 10⁻² π 10⁻⁶ / ( 2 1.7 10-8)

           i =  0.92   A

valancy of an atom is +2. what does it mean. ​

Answers

Answer: I hope you find it useful

Explanation: Group 2 elements have two valence electrons. The two valence electrons are easily lost in the formation of chemical bonds. Once the two electrons are lost, the atom then has a full outer shell and is therefore more stable.

so,  if an atom has valency 2 , then it means that the atom can combine with 2 other atoms .

Part B After producing electricity in many different ways, describe what causes electricity to flow in the coil? In your response, describe the types of forces acting on the electrons and how they result in movement.

Answers

Explanation:

If a coil of wire is placed in a changing magnetic field, a current will be induced in the wire. ... A changing magnetic field through a coil of wire therefore must induce an emf in the coil which in turn causes current to flow.

Due to the flow of the current run, the coil magnetic field is produced. Magnetic fields result in magnetic force.

What is electric force?

The electric force between the two charges is directly propotional to the product of the charge and inversly propotional to the square of the distance between them.

A current will be generated in a wire coil if it is put in a changing magnetic field. As a result, a changing magnetic field through a coil of wire must create an emf in the coil, causing the current to flow.

A current is induced in a coil of wire when it is put in a changing magnetic field. Something generates an electric field that drives the charges around the wire, causing the current to flow.

Hence due to the flow of the current in the coil magnetic field is produced.

To learn more about the electric force refer to the link;

https://brainly.com/question/1076352

please help me with my question I will like and mark as brainliest for the first correct answer due tomorrow morning​

Answers

Answer:

1845.26 ?

Explanation:

18.46 × 99.96= 1845.2616 = 1845.26

im not entirely sure though

A pulley system is made of 3 pulley write its velocity ratio

Answers

Almost 3 times fast than normal pulley system

mark me

3 times fasten than normal pulley

You toss an apple across the room to a friend. Which of the following statements is true about the apple at the top of its trajectory?
A. Its acceleration is zero.
B. The horizontal component of its velocity is zero.
C. The vertical component of its velocity is 9.8 m/s down.
D. Its acceleration is 9.8 m/s2 down.​

Answers

B is the correct answer!! The horizontal component of its velocity is zero.

Q2.
1.0 kg of ice at -10°C is added to 10 g of water at 0°C.
(a)
Find the final temperature of the mixture. (The specific latent heat of fusion of
ice is 336 J/g and the specific heat capacity of ice is 2000 J kg K-1)


Please help

Answers

Answer:

gsbddgshdhsghhdhdhvvs

Mercury is used in thermometer.Give reason​

Answers

Answer:

Mercury is the only one in liquid state at room temperature

List two factors that compression force depends on ​

Answers

The magnitude (size or numerical value) and the direction.

Hope this helps!!! :)

5. Tại sao khi lặn ta luôn cảm thấy tức ngực và càng lặn sâu thì cảm giác tức ngực càng tăng? A. Ap suất của nước giảm ​​B. Ap suất không khí tăng C. Ap suất không khí giảm ​​D. Ap suất của nước tăng

Answers

Answer:

c and d

Explanation:

obviously kksxsxksxkskxkskxksxksxsxsxsxsxsxsxs

Please help (I didn’t know what subject to put this in but it’s earth science)

Answers

Spring summer and USA for the first 2
2. The answer is USA! https://www.netweather.tv/weather-forecasts/news/10277-tornado-facts-which-countries-have-the-most-and-the-deadliest-tornadoes

I think 1. Is A.

3. F5

4. A.

An imaginary star is four light years from earth. The star has a planet, upon which a large mirror has been installed. The mirror faces earth. A ten year old boy aims his telescope at the mirror. How old will the boy be when he sees his own reflection?

Answers

Answer:

14 years

Explanation:

because the light will take four years to reach the earth. And the star is four light years away from the earth.

Hope that helps you please follow

An imaginary star is four light years from earth. The star has a planet, upon which a large mirror has been installed. The mirror faces earth. A ten year old boy aims his telescope at the mirror,then the boy would be 14 years old when he will see his own reflection.

What is a light year?


It can be defined as the distance travelled by the light in one year .it is represented in units of distance such as miles or km.

1 light year is calculated by multiplying the speed of light with the time of one year

1 light year = speed of light × one year time period

1 light year = 3×10⁸ ×(365×24×60×60)

                  =9.461× 10¹⁵ meter


As given in the problem 10 year old boy aims his telescope at the mirror which is 4 light years away then the light has to travel four years to reach the boy ,then the boy would be 14 year old when he would see his own reflection.
Learn more about light year from here

https://brainly.com/question/1302132
#SPJ2

mercury is commonly used in thermometer give reasons​

Answers

Answer:

hi

BECAUSE MERCURY IS USED BECAUSE IT is the only liquid available in room temperature

Explanation:

pls mark as a BRAINLIST

A rod is made up of copper and wood joined together.
After the rod is heated at the join in the centre for about a minute, where would the lowest temperature be?

Answers

my views

Explanation:

Figure (8) shows a rod made up of copper and wood joined together. The rod is heated at the joint in the centre for about a minute. At which point – A, B, C or D, would it show the lowest temperature? PLEASE GIVE REASONS ALSO(MINIMUM 2)

Which are characteristics of a prokaryotic cell? Select three options.


O contains DNA

O lacks DNA

O contains ribosomes

O lacks ribosomes

O contains a nucleus

O lacks a nucleus

I NEED THIS QUICKLY

Answers

Answer:

A. Contains DNA

C. Contains ribosomes

F. Lacks a nucleus

Explanation:

Robin fired a bullet of mass 100 gm from a gun of mass 5 kg. The bullet leaves the gun with a speed of 400 m/s. After penetrating 4 cm of a plank of 10 cm, the bullet loses one third of its initial velocity.
a. Calculate the backward velocity of the gun?
b. Can the bullet penetrate the plank of the wood completely? Explain mathematically.

please help

Answers

(a) The recoil or backward velocity of the gun is 8 m/s.

(b) The bullet cannot penetrate the plank of the wood completely.

The given parameters include;

mass of the bullet, m₁ = 100 g = 0.1 kgmass of the gun, m₂ = 5 kginitial velocity of the bullet, u₁ = 400 m/sthickness of the plank, x = 10 cm

(a) The backward or recoil velocity of the gun is calculated by applying the principle of conservation of linear momentum.

let the backward or recoil  velocity of the gun = u₂

m₁u₁  + m₂u₂ = 0

m₂u₂ = -m₁u₁

[tex]u_2 = -\frac{m_1u_1}{m_2} \\\\u_2 = - \frac{0.1 \times 400}{5} \\\\u_2 = -8 \ m/s[/tex]

Thus, the recoil or backward velocity of the gun is 8 m/s.

(b) determine if the bullet can penetrate the plank of the wood completely

the bullet traveled 4 cm and lost ¹/₃ of u₁the remaining distance to completely penetrate the plank = 6 cmthe final velocity of the bullet at 4 cm, v = 400 - ¹/₃ x 400 m/s  = 266.67 m/s

the acceleration of the bullet is calculated as;

v² = u₁² + 2as

2as = v² - u²

[tex]a = \frac{v^2 -u_1^2}{2s} \\\\a = \frac{(266.67)^2 -(400)^2}{2\times 0.04} = -1.111 \times 10^6 \ m/s^2[/tex]

Finally, determine the distance traveled by the bullet when it comes to a complete stop, that is the final velocity = 0

[tex]v_f^2 = v^2 + 2ad\\\\2ad = v_f^2 - v^2\\\\d = \frac{v_f^2 - v^2}{2a} \\\\d = \frac{(0) - (266.67)^2}{2(-1.111\times 10^6)} \\\\d = 0.032 \ m[/tex]

d = 3.2 cm

The total distance traveled by the bullet inside the plank = 4 cm + 3.2 cm = 7.2 cm

Therefore, the bullet cannot penetrate the plank completely.

To learn more about linear momentum visit: https://brainly.com/question/15869303

e. write unit of the following physical quantities

Answers

Answer:

electric current=ampere(A)

force=Newton (N)

area=metres square(m^2)

power=watt(w)

density=kg/m3 

amount of substance =mole per cubic meter (mol/m3).

volume=cubic meter (m3),

Answer:

thanks for brainlist brother.........

Joseph jogs from one end A to the other end B of a straight 300 m road in 2 minutes 30 seconds and then turns around and jogs 100 m back to point C in another 1 minute. What are Joseph's average speeds and velocities in jogging (a) from A to B and (b) from A to C?​

Answers

Answer:

Explanation:

(a) It is given that Joseph jogs on a straight road of 300m in a time interval of 2 minutes and 30 seconds, which is equal to 150seconds. Therefore, when Joseph jogs from point A to point B, he covers a distance of 300m in time of 150seconds. Hence, his average speed is 300m/150s=2ms^−1. Since it is a straight road and he jogs in a single direction in this case, his displacement is equal to 300m. Since it is a straight road and he jogs in a single direction in this case, his displacement is equal to 300m.

Hence, his average velocity is 300m/150s=2ms^−1

(b) Then it is given that he turns back and points B and jogs on the same road but in the opposite direction for a time interval for 1 minute and covers a distance of 100m.If we consider the whole motion of Joseph, i.e. from point A to point C, then he covers a total distance of 300m+100m=400m. And he covers this total distance in a time interval of 2.5min+1min=3.5min=210s.

Therefore, his average speed for this journey is 400m210s=1.9ms−1.

For the same journey is displacement is equal to the distance between the points A and C,i.e. 300m−100m=200m.

Hence, his average velocity for this case is 200m/210s=0.95ms^−1

Describe the laws of liquid pressure and Explain the term fluid. (Please give the correct answer, it's really urgent)​

Answers

Answer:

The laws of liquid pressure are  

(i) Pressure inside the liquid increases with the depth from the free surface of the liquid.

(ii) Pressure is same at all points on a horizontal plane, in case of stationary liquid.

(iii) Pressure is same in all directions about a point inside the liquid.

(iv) Pressure at same depth is different in different liquids. It increases with the increase in the density of the liquid.

(v) A liquid will always seek its own level.

A Fluid is any liquid or gas or generally any material that cannot sustain a tangential, or shearing, force when at rest.  

Explanation:

how do atoms lose electrons ?

Answers

Atoms lose electrons by a process called ionic bonding. Specifically, the metal atom donates its electron to a non-metal atom and thus takes on the noble gas electron configuration of the noble gas in the period (row of the periodic table) preceding its own.

Answer:

Explanation:

By being close to an atom that will gladly take the electrons being offered.

Suppose you are talking about Be. It is in the second column. It has two outer electrons that can be given away. It will not give away one of the two remaining electrons because they are too close to the + nucleus.

Along comes a Fluorine atom. It has 7 electrons in its outer ring. The chemistry of the situation allows it to take on one of the two electrons Be is offering. It is all a matter of charges and attractions.

Another Fluorine atom will take on the remaining electron from the Be. The outer ring cannot take on more than 1 electron, but that is enough

A jet airplane is in level flight. The mass of the airplane is m=8950 kg. The airplane travels at a constant speed around a circular path of radius R=9.33 mi and makes one revolution every T=0.123 h. Given that the lift force acts perpendicularly upward from the plane defined by the wings, what is the magnitude of the lift force acting on the airplane?

Answers

Answer:

The net force is 91780.8 N.

Explanation:

mass, m = 8950 kg

Radius, R = 9.33 miles = 15015.2 m

Time, T = 0.123 h = 442.8 s

There are two forces acting on the plane.

Horizontal force is the centripetal force and the vertical force is the weight.

[tex]Fx =m R w^2\\\\Fx = m R \frac{4\pi^2}{T^2}\\\\Fx = 8950\times 15015.2\times \frac{4\times 3.14\times 3.14}{442.8\times 442.8}\\\\Fx = 27030.8 N \\\\Fy = m g \\\\ Fy = 8950\times 9.8 \\\\Fy = 87710 N[/tex]

The net force is

[tex]F = \sqrt{Fx^2 + Fy^2}\\\\F = \sqrt {27030.8^2 + 87710^2}\\\\F = 91780.8 N[/tex]

a busis moving with the initial velocity 10m/s . after 4 seconds, the velocity becomes 30m/s . find the acceleration produce by bus,......please I need help​

Answers

Answer:

5 m/s²

Explanation:

Use the acceleration formula: [tex]a=\frac{v_f-v_i}{t}[/tex]

a = acceleration (m/s²)vf = final velocity (m/s)vi = initial velocity (m/s)t = time (s)

Based on the information given to us by the prompt, we know:

vi = 10 m/svf = 30 m/st = 4 s

Substitute these values for the variables to calculate the acceleration:

[tex]a=\frac{30-10}{4}\\\\a=\frac{20}{4}\\\\a=5[/tex]

Therefore, the acceleration of the bus is 5 m/s².

Two stones are dropped from the edge of a 60m cliff , the second stone 1.6secon after the first . How far below the top of the cliff is the second stone when the separation between the two stone is 36m?

Answers

Answer:

The separation between the two stones is 36 m, when the second stone is approximately 10.9 m below the top of the cliff

Explanation:

The given parameters are;

The height of the cliff from which the stones are dropped, h = 60 m

The time at which the second stone is dropped = 1.6 seconds after the first

The distance below the top of the cliff when the distance between the two stones is 36 m = Required

We have;

The kinematic equation of motion that can be used is s = u·t - (1/2)·g·t²

For the first stone, we have, s₁ = u·t₁ - (1/2)·g·t₁²

For the second stone, we get; s₂ = u·t₂ - (1/2)·g·t₂²

t₁ = t₂ + 1.6

g = The acceleration due to gravity ≈ 9.81 m/s²

s = The distance below the cliff top

The initial velocity of the stones, u = 0

Let t represent the time from which the second stone is dropped at which the distance between the two stones is 36 m, we have;

s₁ = u·(t + 1.6) + (1/2)·g·(t + 1.6)²

s₂ = u·t + (1/2)·g·t²

u = 0

∴ s₁ - s₂ = 36 =  (1/2)·g·(t + 1.6)² - (1/2)·g·t²

2 × 36/(g) = (t + 1.6)² - t²  = t² + 3.2·t + 2.56 - t² = 3.2·t + 2.56

2 × 36/(9.81) = 3.2·t + 2.56

t = (2 × 36/(9.81) - 2.56)/3.2 =  ≈ 1.49 s

t ≈ 1.49 s

s₂ = (1/2)·g·t²

∴ s₂ = (1/2) × 9.81 × 1.49² ≈ 10.9

The distance below the top of the cliff of the second stone when the the separation between the two stones is 36 m, s₂ ≈ 10.9 m.

Solve for M₂

Base Equation: M₂ = Fr²/GM₁

F = 132N, G = 6.67 x 10⁻¹¹ Nm²/kg², r = .243m, and M₁ = 1.175 x 10⁴ kg, then what is M₂ = ?

Answers

Explanation:

M₂ = Fr²/GM₁

M₂ = [(132N)(.243m)²]/[(6.67*10^-11N*m²/kg)(1.175*10^4kg)]

M₂ = (7.79N*m²)/(7.84*10^-7N*m²)

M₂ = 9.94*10^6 kg

9. Which of the following is NOT a recommendation to help you succeed in this course?
Consistently and actively work in the course on a daily basis.
Wait until the end of the semester to complete all work.
Complete all assignments in a timely manner.
Contact your instructor if you have questions.

Answers

Answer:

Wait until the end of the semester to complete all work.

Explanation:

this is the obvious answer.

please mark me brainliest

Answer:

Wait until the end of the semester to complete all work

Give reason.


b} String roller is an example of wheel and axel .Why?

Answers

Explanation:

string roller is called an example of wheel and axel because The thin rod which needs to be turned is called the axle and the wider object fixed to the axle, on which we apply force is called the wheel.

hence the we apply force on the roller and the string gets tight.

Ley de Charles-.
1) En un recipiente hermético se tiene 150 ml de una sustancia gaseosa, a una temperatura de 115°C, esto como resultado de una reacción. ¿Cuál sería su volumen inicial, cuando su temperatura era de 100°C?



2) Al inicio cuando la temperatura es de 200°C, se tienen 350 ml de un gas “Y”. ¿Qué volumen se obtendrá si la temperatura se incrementa a 250°C?

Answers

Tomando en cuenta la Ley de Charles y la condiciones dentro del recipiente, tenemos las siguientes conclusiones con respecto al volumen del recipiente:

1) El volumen inicial del gas es 144.203 mililitros.

2) El volumen final del gas es 386.986 mililitros.

La Ley de Charles establece que el Volumen de un gas es directamente proporcional a su Temperatura, basados en este hecho, podemos resolver los problemas en cuestión mediante la siguiente relación matematica:

[tex]\frac{V_{1}}{T_{1}} = \frac{V_{2}}{T_{2}}[/tex] (1)

Donde:

[tex]V_{1}[/tex] - Volumen inicial, en mililitros.

[tex]V_{2}[/tex] -  Volumen final, en mililitros.

[tex]T_{1}[/tex] - Temperatura inicial, en Kelvin.

[tex]T_{2}[/tex] - Temperatura final, en Kelvin.

1) Si sabemos que [tex]V_{2} = 150\,mL[/tex], [tex]T_{2} = 388.15\,K[/tex] and [tex]T_{1} = 373.15\,K[/tex], entonces el volumen inicial del gas es:

[tex]V_{1} = \frac{T_{1}}{T_{2}}\times V_{2}[/tex]

[tex]V_{1} = \frac{373.15\,K}{388.15\,K}\times 150\,mL[/tex]

[tex]V_{1} = 144.203\,mL[/tex]

El volumen inicial del gas es 144.203 mililitros.

2) Si sabemos que [tex]T_{1} = 473.15\,K[/tex], [tex]V_{1} = 350\,mL[/tex] and [tex]T_{2} = 523.15\,K[/tex], entonces el volumen final del gas es:

[tex]V_{2} = \frac{T_{2}}{T_{1}}\times V_{1}[/tex]

[tex]V_{2} = \frac{523.15\,K}{473.15\,K}\cdot 350\,mL[/tex]

[tex]V_{2} = 386.986\,mL[/tex]

El volumen final del gas es 386.986 mililitros.

He aquí una pregunta relacionada con la Ley de Charles: https://brainly.com/question/21184611

A person has power of 550 watt. What does it mean? ​

Answers

Answer:

It means that person can do work or can posses energy at a rate of 550 watts.

Or : can posses energy of 550 joules in one second.

Explanation:

[tex]{ \bf{power = \frac{work}{time} }}[/tex]

Other Questions
what does inclusive leadership mean to you and how will you model inclusively to make a positive impact in your community? Find the sum of the second multiple of 9 and the fifth multiple of 6. 5+a2+ab-9c if a=5 b=4c=0 What were Seneca's influences on Shakespeare Find the values of the unknown angles marked with letters. please help me- it is about alternate angles 100 points!!! a ?b ?c ?d ? What is the authors purposeA-mostly persuasive B- in the middleC-mostly explanatory In this activity, you are going to plan, write, revise, and edit sentences on the following topic: Describe three activities you do at your school or university. Give two or more details about each one. How do hucks feelings about going to school change the paint 3D program is used for drawing picture true or false which of the following is true for a eukaryote? A. it is one of the first life forms to appear on earth. B. it doesn't have a nucleus and organelles. C. it must be a multicellular organism. D it evolved from prokaryotes a.Since the end of the cold war, which region of the world has shaped American foreign policy the MOST?Middle Eastb. Latin AmericaSoutheast Asiad. Western EuropeC. (5.5 X10^6 + 6.3 X10^6)2 What is the solution to 4x + 2 = 6(-2x - 5) ?O2O 160-2O -16Please need help on this Is -626 an integer ? If yes, why. Joshua annual salary is 32,824 what percent monthly salary is used for monthly apartment rent of 684 Plz help I will give brainliest muslims???help plzzzzz Mark all the relative minimum points in the graph.Please help I don't understand what to do. We discussed several techniques of repetition in class. Find another example of repetition (words, phrases, conjunctioclauses, punctuation, etc.) from "Sinners" and explain the effect on the audience. 2) What are three categories of computer languages? 3) Write four components of a QBASIC window. 4) What are the three types of operators in QBASIC? 5) What is the use of connector symbol in flowchart? 6) What is a computer network? 7) State two uses of Internet. 8) Write three examples for web browser. 9) Name some popular ISPs in Sri Lanka. 10) Differentiate between MAN and PAN.