what tearm means per hundred
a.base b.percent c.percentage d.rate​

Answer:

6.8 feet

Answer From Gauth Math

Width = area/length = 22.6/5.2 = 113 ≈/26

Diagonal = √[length² + width²] ≈ √23.0 feet

Answer:

picture not clear what is the length

Answer:

I am not so sure but I am assuming-5 2/3 to be mixed fraction so improper fraction wud be -17/3

now 4*- 17/3 = 68/3

now divide -5/8 ÷ 12

so u must know the rule that if division we can multiply by reciprocal

so -5/(8*12) = -5/96

hope that helps

For engineering, it would be very useful to know Pythagorean theorem. You can use it to measure the tension in each ropes.

Option D is correct. 95% of the distribution lies between 1.9975inches and 3.4025inches.

To get the required range of values, we will have to first get the z-score for the two-tailed probability at a 95% confidence interval. According to the normal table, the required range is between -2.81 and 2.81

The formula for calculating the z-score is expressed as;

[tex]z=\frac{x-\overline x}{s}[/tex] where:

[tex]\overline x[/tex] is the mean

s is the standard deviation

z is the z-scores

Given the following

[tex]\overline x[/tex]=2.7 in

s = 0.25

if z = -2.81

[tex]-2.81=\frac{x-2.7}{0.25}\\x-2.7=-2.81*0.25\\x-2.7=-0.7025\\x=-0.7025+2.7\\x=1.9975[/tex]

Similarly:

[tex]2.81=\frac{x_2-2.7}{0.25}\\x_2-2.7=2.81*0.25\\x_2-2.7=0.7025\\x_2=0.7025+2.7\\x_2=3.4025[/tex]

Hence the 95% of the distribution lies between 1.9975inches and 3.4025inches.

Learn more on normal distribution here: https://brainly.com/question/23418254

Answer:

X=0,y=-5

x=4,y=-1

Step-by-step explanation:

Replace all occurrences of y with x^2-3x-5

(x^2-3x-5)+5=x

x^2-3x=x

X^2-4x=0

so :x=0,4

enter the value of x in the equation then find y

y=-5,-1

Answer:

395.52

Step-by-step explanation:

247.2/2.5=98.88(1 bib)

98.88x4=395.52(4 bibs)

Answer:

Hello,

Step-by-step explanation:

do I remind you of the formula :

where (a,b) is the vertex and y=k the directrix

[tex]y=\dfrac{(x-a)^2}{2(b-k)} +\dfrac{b+k}{2} \\\\\\y=-\dfrac{(x+4)^2}{4} -1 \\\\Using\ identification:\\a=-4\\2(b-k)=-4\\b+k=-2\\\\\left\{\begin{array}{ccc}b-k&=&-2\\b+k&=&-2\\\end{array}\right.\\\\\\\left\{\begin{array}{ccc}2b&=&-4\\2k&=&0\\\end{array}\right.\\\\\\\left\{\begin{array}{ccc}b&=&-2\\k&=&0\\\end{array}\right.\\[/tex]

Focus=(-4,-2)

Directrix: y=0

Vertex=(-4,-1)

Answer:

The range is the set of first coordinates

Split up C into two component paths C₁ and C₂, where each line segment is respectively parameterized by

r₁(t) = (1 - t ) (3i + k) + t (4i + 3j + k) = (t + 3) i + 3t j + k

r₂(t) = (1 - t ) (4i + 3j + k) + t (4i + 5j + 4k) = 4i + (2t + 3) j + (3t + 1) k

both with 0 ≤ t ≤ 1.

It's a bit unclear what function you're supposed to integrate (looks like xyz ?) so I'll give a more general result. The line integral of a scalar function f(x, y, z) along the given path C is

[tex]\displaystyle \int_C f(x,y,z)\,\mathrm ds = \int_{C_1}f(\mathbf r_1(t))\left\|\frac{\mathrm d\mathbf r_1}{\mathrm dt}\right\|\,\mathrm dt + \int_{C_1}f(\mathbf r_2(t))\left\|\frac{\mathrm d\mathbf r_2}{\mathrm dt}\right\|\,\mathrm dt[/tex]

We have

dr₁/dt = i + 3j   ==>   || dr₁/dt || = √(1² + 3²) = √10

dr₂/dt = 2j + 3k   ==>   || dr₂/dt || = √(2² + 3²) = √13

Then the integrals reduce to

[tex]\displaystyle \int_0^1 \left(\sqrt{10}\,f(t+3,3t,1) + \sqrt{13}\,f(4,2t+3,3t+1)\right)\,\mathrm dt[/tex]

If indeed f(x, y, z) = xyz, then we have

[tex]\displaystyle \int_0^1 \left(3\sqrt{10}\,t(t+3) + 4\sqrt{13}\,(2t+3)(3t+1)\right)\,\mathrm dt = 11\sqrt{\frac52}+42\sqrt{13}[/tex]

Answer:

A is the answer! I think you know because the formula is given at the top.

This is a question that asks about the advantages of a systematic random sampling. Thus, we first take a look at the types of sampling, and then we see the advantage of systematic random sampling.

Samples may be classified as:

Convenient: Sample drawn from a conveniently available pool.

Random: Basically, put all the options into a hat and drawn some of them.

Systematic: Every kth element is taken. For example, you want to survey something on the street, you interview every 5th person, for example.

Cluster: Divides population into groups, called clusters, and each element in the cluster is surveyed.

Stratified: Also divides the population into groups. However, then only some elements of the group are surveyed.

Systematic:

One of the bigger advantages is that the systematic sampling eliminate clusters, which means that the last option is wrong.

Inadvertently missing patterns is a problem in systematic sampling, and not an advantage, thus the third option is also wrong.

It also does not reduce sampling variability, thus the first option is wrong.

From this, it can be concluded that the correct option is:

Systematic random sampling does not require a finite population size.

For another example of systematic random sampling, you can check https://brainly.com/question/21100042

Answer:

When variables are the same, multiplying them together compresses them into a single factor (variable). ... When multiplying variables, you multiply the coefficients and variables as usual. If the bases are the same, you can multiply the bases by merely adding their exponents.

Step-by-step explanation:

The selected statistical questions are as follows:

A what is the typical amount of rainfall for the month of June in the Galapagos islands

D how many songs does the class usually listen to each day

G how long does it typically take for 2nd graders to walk a lap around the track

Statistical questions are known by these two main characteristics:

This means that the data vary.  They are not the same data.  For example, "How old is Monday?" is not a statistical question because it has one answer.

Thus, statistical questions are not answered by a single number or answer, especially when the correct answer is just one.  

Learn more examples of statistical questions here: https://brainly.com/question/15729334

Answer:

C

Step-by-step explanation:

Domain of the function is the whole R

Answer:

answer is 10

explanation

when u add 7 with 10 u get 17 then double of 17 is 34

I hope It helps

It is found that the unknown number was 10.

An equation is an expression that shows the relationship between two or more numbers and variables. The addition is one of the mathematical operations. then the addition of two numbers results in the total amount of the combined value.

Given that "I add 7 to a certain number. I double the result. My final answer is 34".

Let consider the number be 10.

When we add 7 with 10 we get;

7 + 10 =  17

then double the result of 17 = 34

Hence, the unknown number was 10.

Learn more about equations here;

https://brainly.com/question/25180086

#SPJ2

Answer:

C  -3 < x ≤ 4

Step-by-step explanation:

-9 < 4x + 3 ≤ 19.

Subtract 3 from all sides

-9-3 < 4x + 3-3 ≤ 19-3

-12 < 4x  ≤ 16

Divide by 4

-12/4 < 4x/4 ≤ 16/4

-3 < x ≤ 4

9514 1404 393

Answer:

  dy/dx = 2x +1

Step-by-step explanation:

The power rule can be used.

  d/dx(x^n) = n·x^(n-1)

Then the derivative of x² is 2x¹ = 2x, and the derivative of x = 1x⁰ = 1.

The derivative of the function is ...

  dy/dx = 2x +1

[tex]\boxed{\sf a_n=\dfrac{(-1)^n}{5n}}[/tex]

a:-

[tex]\\ \sf\longmapsto a_1=\dfrac{(-1)^1}{5(1)}[/tex]

[tex]\\ \sf\longmapsto a_1=\dfrac{-1}{5}[/tex]

[tex]\\ \sf\longmapsto a_1=-5[/tex]

b:-

[tex]\\ \sf\longmapsto a_4=\dfrac{(-1)^4}{5(4)}[/tex]

[tex]\\ \sf\longmapsto a_4=\dfrac{1}{20}[/tex]

c:-

[tex]\\ \sf\longmapsto a_{30}=\dfrac{(-1)^{30}}{5(30)}[/tex]

[tex]\\ \sf\longmapsto a_{30}=\dfrac{1}{150}[/tex]

d:-

[tex]\\ \sf\longmapsto a_{19}=\dfrac{(-1)^{19}}{5(19)}[/tex]

[tex]\\ \sf\longmapsto a_{19}=\dfrac{-1}{95}[/tex]

Answer: The pelican dove 5ft

Step-by-step explanation:

Pelican = 3ft

Fish = -2ft

Went down 3ft to get to 0, went down 2 more feet to get the fish.

Answer:

Mr. Shim would record the number +10 or 10 for Ben because of the word "more".

For Gail, Mr. Shin would record the number -8 because of the word, "less''.

Since Nathaniel did not improve or decrease the number of crunches, Mr. Shin would record the number 0.

I hope this helps better

Answer:

B

Step-by-step explanation:

Answer: 0.155

Step-by-step explanation:

g / 1000 = kilograms

155 / 1000 = 0.155

Answer:

a) The 95% confidence interval for the mean mpg, for the certain model of car is (23.3, 30.1). This means that we are 95% sure that the true mean mpg of the model of the car is between 23.3 mpg and 30.1 mpg.

b) Increasing the confidence level, the value of T would increase, thus increasing the margin of error and making the interval wider.

c) 37 cars would have to be sampled.

Step-by-step explanation:

Question a:

We have the sample standard deviation, and thus, the t-distribution is used to solve this question.

The first step to solve this problem is finding how many degrees of freedom, we have. This is the sample size subtracted by 1. So

df = 15 - 1 = 14

95% confidence interval

Now, we have to find a value of T, which is found looking at the t table, with 14 degrees of freedom(y-axis) and a confidence level of [tex]1 - \frac{1 - 0.95}{2} = 0.975[/tex]. So we have T = 2.1448

The margin of error is:

[tex]M = T\frac{s}{\sqrt{n}} = 2.1448\frac{6.2}{\sqrt{15}} = 3.4[/tex]

In which s is the standard deviation of the sample and n is the size of the sample.

The lower end of the interval is the sample mean subtracted by M. So it is 26.7 - 3.4 = 23.3 mpg.

The upper end of the interval is the sample mean added to M. So it is 26.7 + 3.4 = 30.1 mpg.

The 95% confidence interval for the mean mpg, for the certain model of car is (23.3, 30.1). This means that we are 95% sure that the true mean mpg of the model of the car is between 23.3 mpg and 30.1 mpg.

b. What would happen to the interval if you increased the confidence level from 95% to 99%? Explain

Increasing the confidence level, the value of T would increase, thus increasing the margin of error and making the interval wider.

c. The lead engineer is not happy with the interval you constructed and would like to keep the width of the whole interval to be less than 4 mpg wide. How many cars would you have to sample to create the interval the engineer is requesting?

Width is twice the margin of error, so a margin of error of 2 would be need. To solve this, we have to consider the population standard deviation as [tex]\sigma = 6.2[/tex], and then use the z-distribution.

We have that to find our [tex]\alpha[/tex] level, that is the subtraction of 1 by the confidence interval divided by 2. So:

[tex]\alpha = \frac{1 - 0.95}{2} = 0.025[/tex]

Now, we have to find z in the Z-table as such z has a p-value of [tex]1 - \alpha[/tex].

That is z with a pvalue of [tex]1 - 0.025 = 0.975[/tex], so Z = 1.96.

Now, find the margin of error M as such

[tex]M = z\frac{\sigma}{\sqrt{n}}[/tex]

In which [tex]\sigma[/tex] is the standard deviation of the population and n is the size of the sample.

How many cars would you have to sample to create the interval the engineer is requesting?

This is n for which M = 2. So

[tex]M = z\frac{\sigma}{\sqrt{n}}[/tex]

[tex]2 = 1.96\frac{6.2}{\sqrt{n}}[/tex]

[tex]2\sqrt{n} = 1.96*6.2[/tex]

[tex]\sqrt{n} = \frac{1.96*6.2}{2}[/tex]

[tex](\sqrt{n})^2 = (\frac{1.96*6.2}{2})^2[/tex]

[tex]n = 36.9[/tex]

Rounding up:

37 cars would have to be sampled.

Answer:

D. 6.5

Step-by-step explanation:

The diameter of the cylinder is 1.25 x 2 = 2.5

SK = √1.25² + 6² = √42.25 = 6.5

Answer:

Step-by-step explanation:

D={ 6  , -9  , 1 }

R={  0  ,-3 }