Answer:
4.47
Explanation:
The computation of the standard deviation of lead time is shown below:
= √lead time × standard deviation of demand
= √ 5 days × 4
= √20
= 4.47
We simply applied the above formula to determine the standard deviation of demand during lead time
Hence, all the other items would be ignored
Fed is open to changing bond policy Fed policymakers signaled for the first time that they could increase or decrease stimulation of the economy in the future, but not now. Source: Los Angeles Times, May 1, 2013 What are the ripple effects and time lags that the Fed must consider in deciding when to increase or decrease stimulation of the economy?
Answer:
When the Fed raises the federal funds rate, the inflation rate decreases about two years later.
Explanation:
When trying to stimulate the economy either by increasing or decreasing, policymakers have to take into consideration how it would effect interest rate, amount of money available in the economy, loans that would be acquired by banks and the behavior of interest rate.
Interest rate can be impacted quickly even though the period of time it would take for such action to have a reflection on what quantity of money is available in the economy. Then also a period of 2 years would be taken for this action to take effect on inflation.
Therefore
When the Fed raises the federal funds rate, the inflation rate decreases about two years later.
What term means managing the entire organization so that it excels on all dimensions of products and services that are important to customers?
Answer:
Total Quality Management
Explanation:
Total Quality Management is an approach in which all the employees of the company work to improve the entire process to offer a good customer experience. According to this, the answer is that the term that means managing the entire organization so that it excels on all dimensions of products and services that are important to customers is Total Quality Management.
Founder of Vanguard, Jack Bogle, believes that all investors should buy stock indices. Group of answer choices He believes in strong form market efficiency. He believes in semi-strong form market efficiency. He believes in weak form market efficiency. He believes markets are not efficient.
Answer:
Correct Answer:
1. He believes in strong form market efficiency.
Explanation:
Jack Bogle believed that, in a situation where people simply buy an entire group of stocks as a result of investors investing money into the index fund, it will create a strong market. That is, if every investor in the world only purchased the same index fund, then the market of buyers and sellers would no longer set the fair market price of the stocks in the stock market.
Explain how to use the decision trees and Monte Carlo analysis for quantifying risk. Give an example of how you would use each technique on an IT project.
Answer:
The answer is below
Explanation:
Decision Tree Analysis is a form or type of quantitative risk assessment tool and techniques that involves a diagram that indicates the significances of choosing one or other alternatives.
In other words, the purpose of the tool is to assist you to select between several courses of action.
For example, lines are drawn towards the right for each possible solution, and then the solution is written along the line. Then evaluation of each alternative can be easily considered.
On the other hand, Monte Carlo Analysis is also a form or type of quantitative risk assessment tools and techniques that utilizes optimistic, most probable, and cynical estimates to infer the total project cost and project completion dates.
For example, an estimate of the probability of completing a project at a cost of $100M can be carried out using Monte Carlo Analysis
x
_____ refers to the choices about product attributes, distribution strategy, communication strategy, and pricing strategy that a firm offers its targeted marketsA. Segmentation
B. Supply chain
C. Logistics
D. Marketing mix
E. Media plan
Answer:
D. Marketing mix.
Explanation:
Marketing mix refers to the choices about product attributes, distribution strategy, communication strategy, and pricing strategy that a firm offers its targeted markets.
Generally, a marketing mix is made up of the four (4) Ps;
1. Products: this is typically the goods and services that gives satisfaction to the customer's needs and wants. They are either tangible or intangible items.
2. Price: this represents the amount of money a customer buying goods and services are willing to pay for it.
3. Place: this represents the areas of distribution of these goods and services for easier access by the potential customers.
4. Promotions: for a good sales record or in order to increase the number of people buying a product and taking services, it is very important to have a good marketing communication such as advertising, sales promotion, direct marketing etc.
Identify at least two challenges that Salesforce faces and explain why these are important challenges to Salesforce.
Answer:
Two challenges that Salesforce may face today:
1. Competitions
2. Cash Flows
Explanation:
1. Salesforce has been the global Software-as-a-Service (SaaS) provider for Customer Relationship Management (CRM) system. However, they are challenged by new market joiners such as Hubspot. There are also new startups offering free and simple cloud-based CRM systems that targetting small businesses. The entry of the new competitors seriously threatens the leading market share of Salesforce.
2. The current pandemic affected negatively to all enterprises, including Salesforce's outstanding customers. They should expect a drop in their total number of fee payers while the cost to maintain their high product standard is still the same as before. It may give them a lot of working capital headaches.
A firm has net working capital of $2,715, net fixed assets of $22,407, sales of $31,350, and current liabilities of $3,908. How many dollars' worth of sales are generated from every $1 in total assets
Answer:
So, from every $1 of total assets, $1.08 worth of sales are generated.
Explanation:
To calculate how many dollars worth of sales are generated by $1 of total assets, we use the total assets turnover ratio. It is an accounting measure that measures the efficiency of the company's assets in generating sales. It calculates the dollar values of sales generated by each $1 of total assets. The formula for total assets turnover is,
Total Assets Turnover = Sales / Average Total Assets
We already know the level of sales. We need to determine the value of total assets first.
Total Assets = Fixed assets + Current Assets
As we know that net working capital = current assets - current liabilities,
So, the current assets are,
2715 = Current assets - 3908
2715 + 3908 = Current assets
Current assets = $6623
Total assets = 6623 + 22407
Total assets = $29030
Total Assets Turnover = 31350 / 29030
Total assets turnover = 1.0799 rounded off to 1.08
So, from every $1 of total assets, $1.08 worth of sales are generated.
A couple thinking about retirement decide to put aside $3,000 each year in a savings plan that earns 8% interest. In 5 years they will receive a gift of $10,000 that also can be invested. a. How much money will they have accumulated 30 years from now
Answer:
Total future value= $408,334.38
Explanation:
Giving the following information:
A couple thinking about retirement decide to put aside $3,000 each year in a savings plan that earns 8% interest. In 5 years they will receive a gift of $10,000 that also can be invested.
First, we will determine the future value of the annual deposit investment. We need to use the following formula:
FV= {A*[(1+i)^n-1]}/i
A= annual deposit
FV= {3,000*[(1.08^30) - 1]} / 0.08
FV= $339,849.63
Now, for the $10,000:
FV= PV*(1+i)^n
FV= 10,000*(1.08^25)
FV= $68,484.75
Total future value= 339,849.63 + 68,484.75
Total future value= $408,334.38
As an American investor, you are trying to calculate the present value of a £25 million cash flow that will occur one year in the future. You know that the spot exchange rate is S= $1.9397/ £ and one-year forward rate is F= $1.9581/ £. You also know that the appropriate dollar cost of capital for this cash flow is 6.25% and that the appropriate pound cost of capital for this cash flow is 5.25%. a) What is the present value of the £25 million cash flow from the standpoint of a British investor, and what is the dollar equivalent of this amount? b) What is the present value of the £25 million cash flow from the standpoint of a U.S. investor who first converts the £25 million into dollars and then applies the dollar discount rate?
Answer:
1. Present value in pound=$23,752,969
Dollar equivalent=$46,073,634
2.Dollar equivalent for U.S investors=$48,952,500
Present value in pound=$46,072,918
Explanation:
1a.Calculation for present value of the £25 million cash flow
Using this formula
Present value in pound =cash flow*(1/1+Cash flow cost of capital)^ One year in the future
Let plug in the formula
Present value in pound=$25,000,000*(1/1+0.0525)^1
Present value in pound=$25,000,000*(1/1.0525)^1
Present value in pound=$25,000,000*0.950119
Present value in pound=$23,752,969
1b.Calculation for the dollar equivalent of this amount
Using this formula
Dollar equivalent=Present value in pound*Spot exchange rate
Let plug in the formula
Dollar equivalent=$23,752,969*$1.9397
Dollar equivalent=$46,073,634
2a. Calculation for the Dollar equivalent for U.S investors
Using this formula
Dollar equivalent for U.S investors=Cash flow*one-year forward rate
Let plug in the formula
Dollar equivalent for U.S investors=$25,000,000*$1.9581
Dollar equivalent for U.S investors=$48,952,500
2b. Calculation for the present value of the £25 million cash flow from the standpoint of a U.S. investor .
Using this formula
Present value in pound =Cash flow*(1/1+Cash flow cost of capital)^ One year in the future
Let plug in the formula
Present value in pound=$48,952,500*(1/1.0625)^1
Present value in pound=$48,952,500*0.941176
Present value in pound=$46,072,918
Therefore the Present value in pound for question 1 is $23,752,969 while the Dollar equivalent is $46,073,634.
The Dollar equivalent for U.S investors in question 2 is $48,952,500 while the Present value in pound is $46,072,918
Suppose you are building a scatter plot in Excel for a large amount of data. After selecting the scatter plot option, how do you enter the data into your scatter plot?
a. By manually typing each data point into the scatter plot
b. By using the Quick Styles button under the Chart menu
c. By using the Select Data button and the Select Data Source option
Answer:
c. By using the Select Data button and the Select Data Source option
Explanation:
A scatter plot is a plot which is used to plot the points of the data on the horizontal and the vertical axis also it depicts how one variable is affected by the another.
After preparing the scatter plot to enter the data in the scatter plot we need to use the data button and then data source option so that the data could be entered in the scatter plot
hence, option c is correct
Graham Motors manufactures specialty tractors. It has two divisions: a Treactor Division and a Tire Division. The Tractor Division can use the tires produced by the Tire Division. The market price per tire is $75. The Tire Division has the following costs per tire:Direct material cost per tire: $15Conversion costs per tire: $3 (Assume the $3 includes only the variable portion of conversion costs.)Fixed manufacturing overhead cost for the year is expected to total $116,000. The Tire Division expects to manufacture 58,000 tires this year. The fixed manufacturing overhead per tire is $2 ($116,000 divided by 58,000 tires).Assume that the Tire Division has excess capacity, meaning that it can produce tires for the Tractor Division without giving up any of its current tire sales to outsiders. If Graham Motors has a negotiated transfer price policy, what is the lowest acceptable transfer price? What is the highest acceptable transfer price?• The lowest acceptable transfer price is $_______, the Tire Division's ______________.• The highest acceptable transfer price is $_______, the Tire Division's _____________.
Answer:
The LOWEST acceptable transfer price is $18 the Tire Division's variable cost per tire.
The HIGHEST acceptable transfer price is $75the Tire Division's market price.
Explanation:
Calculation for the lowest acceptable transfer price and the highest acceptable transfer price
Variable Cost per tire:
Direct Material $15
Conversion cost $3
=$18 per tire
The LOWEST acceptable transfer price is $18 Tire division variable cost per tire
Based on the information we were told that the market price per tire is $75 which means that the HIGHEST transfer price is $75 tire division market price.
Therefore If Graham Motors has a negotiated transfer price policy The LOWEST acceptable transfer price is $18 the Tire Division's variable cost per tire While The HIGHEST acceptable transfer price is $75 the Tire Division's market price.
Badger Corporation declared a stock distribution to all shareholders of record on March 25 of this year. Shareholders will receive one share of Badger stock for each 10 shares of stock they already own. Madison Cheesehead owns 1,000 shares of Badger stock with a tax basis of $100 per share. The fair market value of the Badger stock was $110 per share on March 25 of this year.Required:a. What amount of taxable dividend income, if any, does Madison recognize in 2009? b. What is Madison's income tax basis in her new and existing stock in Badger Corporation, assuming the distribution is non-taxable? c. How would you answer questions a and b if Madison was offered the choice between 1 share of stock in Badger for each 10 shares she owned or $100 cash for each 10 shares she owned in Badger?
Answer:
a. What amount of taxable dividend income, if any, does Madison recognize in 2009?
Madison doesn't have to recognize any income because she is not getting any. Only after Madison decides to sell his stocks will he recognize any taxable income if she makes a gain.
b. What is Madison's income tax basis in her new and existing stock in Badger Corporation, assuming the distribution is non-taxable?
Madison current basis is $100 per stock, and after the stock dividend it will be $100 / 1.1 = $90.91 per stock
c. How would you answer questions a and b if Madison was offered the choice between 1 share of stock in Badger for each 10 shares she owned or $100 cash for each 10 shares she owned in Badger?
then the cash dividend would be $10 per stock, which results in $10 x 1,000 = $10,000 taxable income. Her basis in the stock will remain not change.
DPMO stands for:______
a) Defects Per Million Opportunity
b) Defectives Per Million Opportunity
c) Data Per Million Opportunity
d) all of the above
e) none of the above
Answer:
a) Defects Per Million Opportunity
Explanation:
DPMO is an acronym which stands for Defects Per Million Opportunity. Defects per Million Opportunities refers to a standard metric which represents the number of defects in a process per one million opportunities.
In order to calculate the DPMO, we divide the number of defects by the number of opportunities and then multiply by a million.
Additionally, when a quality characteristics or properties do not tally with a standard or specifications it is generally referred to as a defect.
Hence, in a six sigma approach to quality or level of performance, the defects per million opportunities (DPMO) is 3.4.
air pollution causes capital to wear out more rapidly, doubling the rate of depreciation. How would this affect economic growth?
Answer:
The economic growth will be lower.
Explanation:
The rise in pollution and the doubling of the rate of depreciation will affect economic growth adversely. However, rapid wear and tear of capital will cost the person and it will reduce the purchasing power. Thus, lower purchasing power will result in lower economic growth. Moreover, pollution creates three main problems that are reduced labor productivity, rise in health problems, and loss of crop yield. So the reduction in all these factors will also slow down economic growth.
A financial advisor informs a client that the expected return on a portfolio is 8% with a standard deviation of 12%. There is a 25% chance the return will be negative and a 15% chance that the return would be above 16%. Does her assessment follow a normal distribution? Calculate the probabilities for a normal distribution and compare.
Answer:
A) The assessment does not follow a normal distribution
B ) P(r<0) = 0.2546 ( from standard normal table ), P( r > 0.16 ) ≠ 0.15
Explanation:
Expected return on portfolio E (r) = 8%
Standard deviation (STD) = 12%
chances of Negative return P(r < 0 ) = 25%
calculate the probabilities for a normal distribution
E (r) = 0.08 , STD = 0.12, P(r < 0 ) = 0.25
P( r > 0.16 ) = 0.15
calculating the value of the probability P(r < 0 )
P(r < 0 ) = P [tex](Z < \frac{0-E(r)}{STD} )[/tex]
= P ( Z < [tex]\frac{0-0.08}{0.12}[/tex] )
= P ( Z < - 0.667 )
P(r<0) = 0.2546 ( from standard normal table )
calculating the value of the probability P( r > 0.16 )
P( r > 0.16 ) = [tex]P ( Z > \frac{0.16- E(r)}{STD})[/tex]
= P ( Z > [tex]\frac{0.16-0.08}{0.12}[/tex] )
= P ( Z > 0.667 )
to compare if p(r>0.16 ) is = 0.15
P(R > 0.16 ) = 1 - P ( Z < 0.667 )
= 1 - 0.7454 ( value from standard normal table )
= 0.2546
hence P( r > 0.16 ) ≠ 0.15
The assessment does not follow a normal distribution
Determine the value-added, non-value-added, and total lead times, and the value-added ratio under the present and proposed production approaches. If required, round percentages to one decimal place. Present Approach Proposed Approach Value-added time 23 min 23 min Non-value-added time 1,582 min 105 min Total lead time 1,605 min 1,605 min Value-added ratio (as a percent) 14 % 21 %
Answer:
Hello some parts of your question is missing attached below is the missing part
Answer : value added times : 30 minutes , 30 minutes
non-value added times: 1210 minutes, 130 minutes
Total lead times : 1240 minutes, 160 minutes
value added time as a ratio: 2.4%, 18.8%
Explanation:
Given data:
production batch sizes = 40 units
process step 1 = 6 minutes
process step 2 = 10 minutes
process step 3 = 6 minutes
process step 4 = 8 minutes
Determining : The value added, non-value added , total lead times and value added ratio under the present and proposed production approaches
UNDER PRESENT PRODUCTION APPROACH
Th value added time:
= summation of all process times = (6+10+6+8) = 30 minutes
Non-value added time:
= Value added time *(Batch size -1) + move time between each step
= 30*39+8*5
= 1170 +40 = 1210 minutes
total lead time :
= value added time + non-value added time
= 30 + 1210 = 1240 minutes
value added time as a percentage/ratio
(value added time / total lead time) * 100
= 30 / 1240 * 100 = 2.4%
UNDER PROPOSED PRODUCTION APPROACH
value added time :
= summation of all process times = (6+10+6+8) = 30 minutes
Non-value added time :
= Value added time *(Batch size -1) + time between each step
= 30*4+2*5 = 120 + 10 = 130 mins
total lead time :
= value added time + non-value added time = 30 +130 = 160 mins
value added time as a percentage/ratio:
(value added time / total lead time ) * 100
= (30 / 160) * 100 = 18.8%
The marketing department of Jessi Corporation has submitted the following sales forecast for the upcoming fiscal year (all sales are on account):
1st Quarter 2nd Quarter 3rd Quarter 4th Quarter
Budgeted unit
sales 12,200 13,200 15,200 14,200
The selling price of the company’s product is $21 per unit. Management expects to collect 65% of sales in the quarter in which the sales are made, 30% in the following quarter, and 5% of sales are expected to be uncollectible. The beginning balance of accounts receivable, all of which is expected to be collected in the first quarter, is $72,600.
The company expects to start the first quarter with 2,440 units in finished goods inventory. Management desires an ending finished goods inventory in each quarter equal to 20% of the next quarter’s budgeted sales. The desired ending finished goods inventory for the fourth quarter is 2,640 units.
Required
1-A. Complete the company's sales budget.
1st Quarter 2nd Quarter 3rd Quarter 4th Quarter Year
Budgeted Units Sales
Selling Price Per Unit
Total Sales
1-B. Complete the schedule of expected cash collections.
1st Quarter 2nd Quarter 3rd Quarter 4th Quarter Year
Beginning Accts Receivable
1st Quarter Sales
2nd Quarter Sales
3rd Quarter Sales
4th Quarter Sales
Total Cash Collections
2. Prepare the company’s production budget for the upcoming fiscal year.
1st Quarter 2nd Quarter 3rd Quarter 4th Quarter Year
Budgeted Unit Sales
Total Needs
Required Production in Units
Answer:
1-A. Sales budget
1st 2nd 3rd 4th
Quarter Quarter Quarter Quarter Year
Sales units 12,200 13,200 15,200 14,200 54,800
Price per unit $21 $21 $21 $21 $21
Total sales $256,200 $277,200 $319,200 $298,200 $1,150,800
1-B. Cash collections budget
1st 2nd 3rd 4th
Quarter Quarter Quarter Quarter Year
Collections from $72,600 $76,860 $83,160 $95,760 $72,600
previous quarter
Collections from $166,530 $180,180 $207,480 $193,830 $1,003,900
current quarter
Total $239,130 $257,040 $290,640 $289,690 $1,076,500
2. Productions budget
1st 2nd 3rd 4th
Quarter Quarter Quarter Quarter Year
Sales units 12,200 13,200 15,200 14,200 54,800
Planned ending 2,640 3,040 2,840 2,640 2,640
inventory
Total production 14,840 16,240 18,040 16,840 65,960
required
- Beginning 2,440 2,640 3,040 2,840 2,440
inventory
Units to be 12,400 13,600 15,000 14,000 63,520
produced
Answer:
sells budget
Explanation:
Identify whether each of the following examples belongs in M1 or M2.
a. Van has $2,500 in a savings account.
b. Paolo has a $10 bill in his wallet.
c. Amy has $7,000 in a six-month certificate of deposit (CD).
Answer: The answer is given below
Explanation:
It should be noted that M1 will be derived as Currency plus the Travelers check while M2 will be M1 plus the certificate of deposit plus the money market account.
a. Van has $2,500 in a savings account.
It should be noted that money in a savings account will have to be included in M2.
b. Paolo has a $10 bill in his wallet.
This fits into the description of both M1 and M2 forms of money.
c. Amy has $7,000 in a six-month certificate of deposit (CD)
The certificate of deposit is included in the M2.
Answer:
Option A is M2
Option B is M1
Option C is M2
Explanation:
The above classifications speak to various categories of money supply.
M1 refers to the supply of money that is composed of physical currency such as notes, coins, demand deposits other checkable deposits, etc.
Simply put, M1 would include forms of money that are liquid or easy to convert into cash.
M2 and M3 which are also known as "near money" and "near, near money," are money types which cannot be converted to currency as quickly as M1.
Another example of M2 is Money Market Mutual Funds. M1 is often included when calculating for M2.
Cheers!
Which of the following are recommended ways to learn more about IT careers? Check all of the boxes
that apply.
scheduling an appointment with a career counselor at a school
attending an informational session
applying for an internship
renting a science fiction movie about computer viruses
contacting a professional organization, such as CompTIA
Answer:
scheduling an appointment with a career counselor at a schoolattending an informational sessionapplying for an internshipcontacting a professional organization, such as CompTIAExplanation:
To learn more about IT careers or just carriers in general, one can contact the Career counselor at school. Their job is to help students find out more abut careers so that they know which path they would like to follow.
One can also attend information sessions where they can listen to people speak on IT careers and ask questions they would like answers to as well.
A practical way to find out about IT careers is to intern at an IT firm. This way you get to see first hand what the job entails and if it is the kind of thing you would like to do.
There are also professional organizations that offer certifications in IT such as CompTIA. As they are well versed in the area, they can provide more information on IT careers including the educational background required.
Answer:
1. Scheduling an appointment with a career counselor at school.
2. Attending an informational session.
3. Applying for an internship
5. Contacting a professional organization, such as CompTIA.
Explanation: This is the correct answer on Edge 2021, just did the assignment. Hope this helps ^-^.
Which of the following is an advantage of job specialization? 1 point A. The quality of work increases. B. Jobs can be mastered quickly. C. Employees are more involved with their jobs. D. The work is less repetitive. E. Task specialization has no clear advantages to the organization
Answer: B. Jobs can be mastered quickly.
Explanation:
Job specialization is when the employees in an organization focuses and concentrates on one particular aspect in a organization. Specialization makes employees more efficient and also effective at their role.
Also, jobs can be mastered quickly since the employees typically focuses on one particular aspect in the organization.
A gift-wrapping business is staffed by Kaitlyn, Rob, Sam, Susan and Sarah. The production by each of the staff members for an average eight-hour work day is as follows:
Assume that the standard or normal productivity in the organization is 10 minutes per package. What is Kaitlyn's efficiency?
Kaitlyn Rob Sam Susan Sarah
72 packages 55 packages 52 packages 52 packages 48 packages
a. 0.75 (75%)
b. 1.50(150%)
c. 9.0 packages per hour
d. 1.50 packages per hour
e. 9.0 minutes per package
Answer:
b. 1.50(150%)
Explanation:
Given that, the standard time per packages is 10 minutes
Then, the total time taken in eight hour shift is 8 * 60 = 480 minutes
The standard output = Total time taken / Standard time = 480/10 = 48 packages
Therefore, the efficiency of Kaitlyn = Kaitlyn's Output / Standard output
=72 / 48
= 1.5
Hence, the answer is 150% or 1.5
The central problem in product-oriented layout planning is?
Answer: The minimizing the imbalance in the workloads among workstations.
Explanation:
Workspace can inspire informal and productive encounters if it balances what three physical and social aspects.
A company reported that its bonds with a par value of $50,000 and a carrying value of $57,500 are retired for $60,600 cash, resulting in a loss of $3,100. The amount to be reported under cash flows from financing activities is:
Answer:
The amount this company would report under cash flows from financing activities is $60,600.
Explanation:
These cash flows of $60,600 represent the actual cash outflows, an amount that bondholders would receive from the company in retirement of the bonds. The statement of cash flows records the actual cash inflows and outflows of a company transactions during a particular accounting period. Every item is adjusted to reflect the actual cash flows. It is strictly based on the Cash Basis of accounting instead of the accrual basis.
On August 1, 2010, a company issues bonds with a par value of $600,000. The bonds mature in 10 years and pay 6% annual interest, payable each February 1 and August 1. The bonds sold at $592,000. The company uses the straight-line method of amortizing bond discounts. The company's year-end is December 31. Prepare the general journal entry to record the interest accrued at December 31, 2010.
Answer:
Dr Discount on BP 8,000
Cr Cash 592,000
Cr Bond payable 600,000
Dr Interest expense 15,333.33
Cr Interest payable 15,000
Cr Discount on BP 333.33
Dr Interest payable 15,000
Dr interest expense 3,066.67
Cr Cash 18,000
Cr Discount on BP 333.33
Explanation:
Preparation of the general journal entry to record the interest accrued at December 31, 2010.
Based on the information given we were told that the company issues bonds with a par value of the amount of $600,000 in which the bonds mature in 10 years with a 6% annual interest and sold at the amount of $592,000 this means that the transaction will be recorded as:
Dr Discount on BP 8,000
(600,000-592,000)
Cr Cash 592,000
Cr Bond payable 600,000
(To record issuance of the bonds)
Dr Interest expense 15,333.33
Cr Interest payable 15,000 (600,000 x 6% x 5/12 )
Cr Discount on BP 333.33
(8,000 / (10years* 2 payment =400*5/6=333.33)
(To record year end adjustment entry)
Dr Interest payable 15,000
(600,000 x 6% x 5/12 )
Dr interest expense 3,066.67
(600,000 x 6% x 1/12=3,000)
(400 - 333.33= 66.67)
(3,000+66.67=3,066.67)
Cr Cash 18,000
(600,000 x 6% x 6/12)
Cr Discount on BP 333.33
(8,000 / (10years* 2 payment =400*5/6=333.33)
(To record first interest payment to bondholders)
Barron, Inc. sold goods for on account. The company operates in a state that imposes a % sales tax. What is the amount of the sales tax payable to the state
Answer: A. $96,855
Explanation:
Sales taxes are a form of revenue for Government and are paid on certain goods and services.
The formula is;
Sales tax payable = Goods sold * Sales Tax rate
= 880,500 * 0.11
= $96,855
Midyear on July 31st, the Digby Corporation's balance sheet reported: Total Assets of $205.498 million Total Common Stock of $6.350 million Cash of $10.050 million Retained Earnings of $44.117 million. What were the Digby Corporation's total liabilities?
a) $165.081 million.
b) $144.981 million.
c) $155.031 million.
d) $161.381 million.
Answer:
The value of total liabilities is $155.031 million and option c is the correct answer.
Explanation:
The basic accounting equation states that the total value of assets is always equal to the sum of the total value of liabilities and the total value of equity.
Thus, we can say that,
Total Assets = Total Liabilities + Total Equity
The equity part can contain various components. In the given question it has two components namely Common Stock and retained earnings.
205.498 = Total Liabilities + (6.350 + 44.117)
205.498 = Total Liabilities + 50.467
205.498 - 50.467 = Total Liabilities
Total Liabilities = $155.031
The Herfindahl-Hirschman Index (HHI) is a mathematical approach to understanding market concentration that provides a single concentration indicator. What is the HHI for an industry characterized by the below noted data?Firm 1 has a market share of 40%Firm 2 has a market share of 20%Firm 3 has a market share of 15%Firm 4 has a market share of 15%Firm 5 has a market share of 10%HHI=___
Answer:
2550
Explanation:
The HHI is calculated by squaring the market share of each firm in the industry.
40² + 20² + 15² + 15² + 10² = 1600 + 400 + 225 + 225 + 100 = 2550
Charlie hopes to accumulate $83,000 in a savings account in 10 years. If he wishes to make a single deposit today and the bank pays 3 percent compounded annually on deposits of this size, how much should Charlie deposit in the account
Answer:
PV= $61,759.80
Explanation:
Giving the following information:
Future value (FV)= $83,000
Number of years (n)= 10 years
Interest rate (i)= 3% compounded annually
To calculate the initial deposit, we need to use the following formula:
PV= FV/(1+i)^n
PV= 83,000 / (1.03^10)
PV= $61,759.80
Identify factors that could prevent an older, established company from effecting an enterprise-wide, customer-centric culture.
Answer:
A more established company may find it difficult to implement an enterprise-wide, customer-centric culture due to the following reasons:
A) Existence of a Multi-Product Business Model
A business entity that is well established with a lot of years under its belt will find it a tough challenge to shift from a product-oriented business model to a customer-oriented business model.
To be product-focused simply means that that a company has woven its organisational structure around products. For examples, a company that is into the gaming business may have teams for their Sports Betting Section, another for their online gaming section, game hardware section, gaming apps section etc.
First, for these various teams, their performance metric will largely depend on how functionally efficient their products are.
Second, techy or geeky staff are seldom efficient when it comes to emotional intelligence - a key requirement for being customer efficient.
One way to handle this is to ensure that there is a central Customer Relationship Management team that oversees the customers for each product.
B) Organisational Inflexibility
As direct to the point as it sounds, getting market intelligence for with the intention to use them for decision making is challenging. What is tougher is the ability to implement the insights from such intelligence to effect a turn around in the way customers perceive and respond to a company's offerings.
The ability to quickly take gather market intel, agree on a strategic direction based on same and execute can be referred to organisational agility.
The more bureaucratic and hierarchical an organisation is (this, by the way, characterises older and more established business systems) the less agile it is likely to be.
Cheers!
King Company issued bonds with a face amount of $1,600,000 in 2015. As of January 1, 2020, the balance in Discount on Bonds Payable is $4,800. At that time, King redeemed the bonds at 102.Required:Assuming that no interest is payable, make the entry to record the redemption.
Answer:
January 1, 2020
Bonds Payable 1600000 Dr
Loss on Redemption of bonds 36800 Cr
Discount on Bonds Payable 4800 Cr
Cash 1632000 Cr
Explanation:
The redemption of bonds before the maturity usually requires a payment for redemption which is a certain percentage of its face value. It is usually higher than the face value. The above bonds are redeemed at 102 which means at 102% of the face value of the bonds. Thus, the cash paid to redeem the bonds is,
Cash = 1600000 * 102% = 1632000
The bonds have a carrying value, which is the face value less discount or add premium, of,
Carrying value = 1600000 - 4800 = $1595200
If they are redeemed for an amount in excess of the carrying value, they are redeemed at a loss.
The loss on redemption is,
Loss = 1595200 - 1632000 = $36800
