what is the specific heat of metal 200 gram sample that used 10,000 joules of heat to take its temperature from 20 degrees celsius to 100 degrees? a) 0.335 b) 0.995 c) 0.625 d) 0.885

Interior exit stairway doors must be able to open on  Both sides without any special knowledge, effort, or key.

"An exit element that serves to meet one or more means of egress design requirements, such as the required number of departures or exit access travel distance, and is open to yards, courts, or public ways," is the definition of an outdoor exit stairway.

In Here, a building's design can incorporate an interior stairway that leads to the first floor. The pathway leads to a hallway that opens to the outside. Additionally, this corridor must maintain the same level of fire protection.

Therefore, Exit access refers to the section of a route leading to an exit. One instance of an exit access is a hallway on the fifth floor of an office building that connects to an enclosed stairway with a two-hour fire resistance rating and must remain open on all sides.

Learn more about exit stairway doors  from

https://brainly.com/question/15020213
#SPJ1

Triply orthogonal pyrrolysyl-tRNA synthetase/tRNA pairs are a type of engineered genetic tool that can be used to encode three distinct non-canonical amino acids into proteins.

More about Amino acids :
These tools consist of three components: a pyrrolysyl-tRNA synthetase (PylRS) enzyme, a tRNA carrying a non-canonical pyrrolysyl amino acid, and a modified tRNA carrying a canonical amino acid. Together, these components enable the addition of the non-canonical amino acids in place of the canonical amino acids, thus allowing the creation of proteins with novel sequences and properties. These tools have been used to study protein function and to create synthetic proteins with novel properties, such as increased stability or enhanced binding affinity.

To know more about Amino acids
https://brainly.com/question/28409615
#SPJ4

Multiple stimuli can be combined to produce a stronger muscle contraction through summation. Tetanus is the term for when multiple contractions are combined into a single, ongoing contraction.

While recovery as rest interval increases indicates the return to Ca2+-free parvalbumin, relaxation slows as tetanus duration increases due to the increased saturation of parvalbumin by Ca2+. The relaxation rate in WT muscles remained somewhat faster during all tetanus durations.

Tetanus is more tense because the buildup of calcium ions and newly created cross-bridges will make the contraction stronger over time.

To know more about contraction visit:-

https://brainly.com/question/2669219

#SPJ4

Sequential reactions are a series of linked reactions in which the output of one reaction serves as the starting material for another.

Sequential reactions are series of connected reactions where the outcome of the first reaction serves as the starting material for the second reaction. In crucial industrial processes like the chlorination of methane, sequential reactions take place.

The times when each chemical species reaches its peak were calculated using an analysis of a generalized sequence of three sequential reactions. Each species' differential rate laws were solved in order to ascertain the concentration of each species as a function of time.

Each solution produced the chemical species' concentration curve. Through slope-analysis, it was discovered that the concentration curves of species A1 and A2 had distinct maxima.

The concentration curve of the final product, A3, was approaching a limit but lacked a clear maximum.

To learn more about sequential reaction refer to:

https://brainly.com/question/934753

#SPJ4

According to Boyle's law, the piston rises, and these two factors—increasing pressure and decreasing volume—are associated in pistons.

Boyle's law, also known as the Boyle-Mariotte law or Mariotte's law, describes the relationship between the volume and pressure of a confined gas (especially in France). Boyle's law states that in a closed system with constant temperature and gas volume, the absolute pressure exerted by a given mass of an ideal gas is inversely proportional to the volume it fills. PV = k is the algebraic expression for Boyle's law. Volume times pressure equals some constant, which is identical to some constant k, where k is a constant, P is the gas's pressure, and V is the gas's volume. According to Boyle's Law,

Learn more about Boyle's law from

brainly.com/question/1696010

#SPJ4

The smoothing system using convolution with a box of length N and height 1/N can be described by the following equation:

h1n=(un-un-N)/N

Step-by-step explanation:

To find the coefficients {a, b} of the linear constant coefficient difference equation (LCCDE) for this system, we can rewrite the equation as follows:

h1n = un/N - un-N/N

If we let a = 1/N and b = -1/N, we can express this equation as an LCCDE:

a * un + b * un-N = h1n

For N=10, the coefficients {a, b} are:

a = 1/10 = 0.1

b = -1/10 = -0.1

The coefficients for the system h1n=0.8nun can be found in a similar manner. If we let a = 0.8 and b = 0, we can express this equation as an LCCDE:

a * un + b * un-N = h1n

The coefficients for this system are:

a = 0.8

b = 0

Note that the LCCDE for the smoothing system using convolution with a box of length N and height 1/N is a first-order difference equation, as it depends on the current and previous values of the input signal (un and un-N). The LCCDE for the system h1n=0.8nun is also a first-order difference equation, as it depends only on the current value of the input signal (un).

To know more about System, visit: https://brainly.com/question/22946942

#SPJ4

The angular velocity of the gear is 2.40 rad/s.

Angular velocity is the rate of change in the angle between two bodies or the rate at which an object revolves or rotates around an axis. This displacement in the figure is shown as the angle between a line on one body and a line on the other.

Angles or angular displacements are often expressed in engineering terms as degrees or revolutions (of 360°), and angular velocities as revolutions per minute (rpm). Typically, angles and angular velocities in mathematics and physics are expressed in radians and radians per second, respectively.

Through the following conversion factors, these measurements are related: One radian equals 1/180 (or 0.0175) of a degree, while one revolution per minute (or rpm) equals 1/30 (or 0.0105) of a radian.

Learn more about Angular velocity

https://brainly.com/question/1452612

#SPJ4

A 24-tooth gear has full-depth involute teeth that are agma standard and have a diametral pitch of 5. Its circular pitch is 0.618 inches, addendum is 0.8333 inches, dedendum is 0.10417 inches, and diametrical pitch is 12.

A gear is a spinning, circular machine element with teeth that mesh with another toothed component to transmit torque. The teeth can be cut or inserted (called cogs in the case of a cogwheel or gearwheel). A gear's teeth prevent slippage, which is a benefit.

Therefore, the diameter of the gear's pitch circle determines the gear's diametrical pitch. Depending on the measuring system employed, it is equivalent to the number of gear teeth per inch or per centimetre of its diameter.

Tooth Number, N = 24  

Diametral pitch pd = 12

Pitch diameter, d = N/pd = 24/12 = 2 inches

Circular pitch, pc = π/pd  = 3.142/12 = 0.2618 inches

Addendum, a  = 1/pd = 1/12 =0.08333 inches

Dedendum, b = 1.25/pd = 0.10417 inches

Tooth thickness, t = 0.5pc = 0,5 * 0.2618  = 0.1309 inches

Clearance, c = 0.25/pd = 0.25/12 = 0.02083 inches

To learn more about gears visit:

brainly.com/question/14455728

#SPJ4

Answer:

the ground wire must be grounded.

Explanation:

For fire alarm cable to be effective, the ground wire must be grounded. This is because grounding the wire helps to ensure that the fire alarm system is properly connected to the earth, which can help to protect against electrical surges and other issues that could interfere with the proper functioning of the system. Additionally, grounding the wire can help to prevent the build-up of static electricity, which can damage the cable or the fire alarm system itself.

Aluminum metal corrodes in the same way that iron does, but it does not decompose as quickly because aluminum oxide does not flake off just like rust and serves as a protective layer.

What is Rusting?

Rust is the chemical reaction that occurs when iron reacts with oxygen and water. However, the term "rust" is poorly defined in chemistry because many chemicals can be formed when iron is left exposed. However, the red, flaky appearance caused by certain chemicals is commonly referred to as rust.

In normal environmental conditions, corroding iron or steel produces a wide range of compounds. Depending on what molecules they pick up from the environment while rusting, some of these chemicals will be black, blue, yellow, gray, or brown. Acid rain, for example, can combine with iron to form molecules of pyrite, the yellow mineral known as "fool's gold". These minerals are not at all what we think of as rust. What we usually mean is an iron oxide (III) with a red or red-brown appearance.

To learn more about Aluminum metal, visit: https://brainly.com/question/27128704

#SPJ4

D) Identify the problem step comes first in the decision-making process.

In psychology, decision-making (also spelled decision making and decisionmaking) is regarded as the cognitive process resulting in the selection of a belief or a course of action among several possible alternative options. It could be either rational or irrational. The decision-making process is a reasoning process based on assumptions of values, preferences and beliefs of the decision-maker. Every decision-making process produces a final choice, which may or may not prompt action. Research about decision-making is also published under the label problem solving, particularly in European psychological research. Decision-making can be regarded as a problem-solving activity yielding a solution deemed to be optimal, or at least satisfactory. It is therefore a process which can be more or less rational or irrational and can be based on explicit or tacit knowledge and beliefs. Problem solving and critical thinking refers to the ability to use knowledge, facts, and data to effectively solve problems.

To know more about decision-making visit:

https://brainly.com/question/16407152

#SPJ1

1. a.true

SQL is the type of logical programming language which can be used to query the databases about the information.

2. The following is the valid statement regarding the querying of the fact-base:

a. We write specific programs after designing the fact-base where we have to process the information ourselves to draw conclusions.

What is programming?

Computer programming is the process of performing specific computations (or, more generally, obtaining specific computational results), usually by designing and writing executable computer programs. Programming includes tasks such as algorithm analysis, generation, profiling algorithm accuracy and resource consumption, and algorithm implementation (usually in the programming language of choice, commonly referred to as coding). A program's source code is written in one or more languages ​​understood by the programmer, not machine code that is directly executed by the CPU.

1. a.true

SQL is the type of logical programming language which can be used to query the databases about the information.

2. The following is the valid statement regarding the querying of the fact-base:

a. We write specific programs after designing the fact-base where we have to process the information ourselves to draw conclusions.

To know more about programming, visit:

https://brainly.com/question/23275071

#SPJ4

Data validation is a method used to increase data entry accuracy by restricting the kinds of data or values that can be submitted.

Select the formula cell that has the error visible in it in order to use Excel's Trace Error feature. Select the "Trace Error" drop-down menu under the "Formula Auditing" button group on the Ribbon's "Formulas" tab. Draw arrows to the cells producing the issue by selecting the "Trace Error" command from the drop-down menu.

Techniques for error detection. The three primary methods for finding problems in frames are the parity check, checksum, and cyclic redundancy check (CRC).

To know more about Data validation visit :-

https://brainly.com/question/29033397

#SPJ4

Edge dislocations can be attributed to the termination of an atom plane in the crystal's center.

Each chemical element is distinguished from the others by atoms, which are tiny particles of matter. An atom is composed of a core nucleus that is negatively charged and one or more electrons in orbit. The protons and neutrons that make up the nucleus are positively charged and moderately heavy.

Quarks and electrons are the two main subatomic kinds that make up an atom. Around the atom's nucleus is a zone of electrons. The electrical charge on every electron is negative. The protons and neutrons that comprise the atom's nucleus are made up of quarks.

To know more about atom visit:

https://brainly.com/question/12231872

#SPJ4

In selecting a production facility location, labor supply would be most important to the software designer. Thus, the correct option for this question is C.

Labor supply may be defined as the number of persons willing to work at different wage rates. It depends upon the existing wage rate and is measured in terms of man-days.

Manufacturing or production refers to the process of turning raw materials or parts into finished goods through the use of tools, human labor, machinery, and chemical processing. It requires a regular labor supply in terms of production.

Therefore, in selecting a production facility location, labor supply would be most important to the software designer. Thus, the correct option for this question is C.

To learn more about Software designer, refer to the link:

https://brainly.com/question/26135704

#SPJ1

The audio engineer should increase the sampling rate to ensure that the quality of recordings are better preserved .

To learn more about  sampling rate, refer:

https://brainly.com/question/29519477

#SPJ4

Recursive function that parses a binary number as a string into a decimal integer in C++.

Function uses recursion to parse the binary number by breaking it down into its last digit and the rest of the number. The last digit is converted to a decimal value and added to the rest of the number, which is multiplied by 2.

The process is repeated until the entire binary number has been converted to a decimal integer.

#include <iostream>

#include <string>

using namespace std;

int binaryToDecimal(const string& binaryString);

int main()

{

   cout << "Enter a binary number: ";

   string binaryString;

   cin >> binaryString;

   int decimal = binaryToDecimal(binaryString);

   cout << "The decimal equivalent is: " << decimal << endl;

   return 0;

}

When the program is run, it will prompt the user to enter a binary number, and then it will display the decimal equivalent of the number.

To Know More About recursion, Check Out

https://brainly.com/question/29238957

#SPJ4

'h1' is admissible 'h1' is consistent 'h2' is admissible 'h2' is consistent 'h1' is better (dominating) than 'h2'  is True

To learn more about Heuristics  refer to:

https://brainly.com/question/9008084

#SPJ4

a. The latency of a load instruction in a five stage pipelined implementation of this MIPS processor is given as follows: 950 ps.

b. The metrics improved by pipelining are given as follows:

Both of the above options. (execution time and throughput).

The latency of a load instruction in a five stage pipelined implementation of this MIPS processor is calculated as the sum of the delays for each part.

The delays are given as follows:

150 ps, 250 ps, 200 ps, 250 ps, 100 ps.

Then the latency of the load instruction is calculated as follows:

150 + 250 + 200 + 250 + 100 = 950 ps.

Pipelining is when a sequence of instructions can be executed concurrently, thus reducing the execution time and increasing the amount of instructions that can be executed in a period of time (improving the throughput).

This means that both the execution time and the throughput are improved through pipeling.

More can be learned about pipelining at https://brainly.com/question/13684647

#SPJ1

Answer:

Explanation:

Microinverter solar panels are photovoltaic (PV) panels that are equipped with microinverters, which are small electronic devices that convert the direct current (DC) electricity produced by the PV panels into alternating current (AC) electricity. The AC electricity produced by the microinverters can be used to power appliances and devices in a home or building, and it can also be fed back into the grid.

Microinverter solar panels are connected to the grid in a similar way to traditional PV panels. They require a 240V signal from the grid to function properly and to produce electricity. The microinverters in the panels convert the DC electricity produced by the PV cells into AC electricity, which is then fed back into the grid or used to power appliances and devices.

For a list of 500 numbers, at most 9 iterations would the loop in binary search run to find a number,

Iteration is the process of repeatedly performing a step in order to produce a sequence of results that may or may not be bounded. A single iteration of the process is one in which the results serve as the foundation for the subsequent iteration.

Iteration is a common component of algorithms in the fields of mathematics and computer science, along with the related technique of recursion.

Iteration in computing is the process of repeatedly running a set number of times through a block of statements contained within a computer programme. A computer scientist may also refer to that block of statements as a "iteration" if they are said to be iterated.

Learn more about Iteration

https://brainly.com/question/28134937

#SPJ4

Is it possible to apply logic levels to a device with the transfer properties listed so that it can function as an inverter? If so, what are the input, output, low, high, and noise margins (VIL, VOL, VIH, and VOH)? (NML and NMH)

The exact same number of elements from Y are assigned to each element of X via a mathematical function from a set X to a set Y. Two Persian mathematicians named Al-Biruni and Sharaf al-Din al-Tusi are credited with providing the first known treatment of the idea of function. Functions were first used to describe the idealized relationship between two varying quantities. For instance, time affects a planet's position. Historical development of the concept coincided with the invention of infinitesimal calculus at the end of the 17th century, and the functions taken into account were differentiable until the 19th century.

Learn more about functions from

brainly.com/question/11624077

#SPJ4

(a) The final equilibrium pressure in bars = 10 bars (b) The heat transfer in Kj=14.264 KJ (c) The entropy change inkj/k of the steam = 0.03KJ/K

(d) The total entropy change, in kj/K

We should understand that insulated tanks deal with systems that has change with respect to the amount of heat transferred through its surroundings.

The given parameters are

h₁=2993.4KJ/kg

S₁=6.8402KJ/kh.K

V₁=0.163cm³/kg

All these values are drawn from the steam table

The tank volume can be determined first using the formula

V=mx

Volume = 0.00652m³ while the mass balance = 0.5m₁=mₙ

This implies that the specific balance is V₂=V/mₙ

V₂=0.3350KJ/kg

S₂=7.59KJ/kg.k

(a) The final equilibrium pressure in bars = P₂=10 bars

(b)  The heat transfer, in kj is

m₂h₁+Q=m₂h₂

This implies that Q when made the subject is 14.264KJ

(c) The entropy change in kj/K of the steam is

Δs=0.03KJ/K

(d) The total entropy change, in kj/k steam is determined by

Δs=m(s₂-s₁) +Q/T

This implies that Δs=0.05KJ/K

In conclusion, (a) The final equilibrium pressure in bars = 10 bars (b) The heat transfer in Kj=14.264 KJ (c) The entropy change inkj/k of the steam = 0.03KJ/K

(d) The total entropy change, in kj/K

Learn more about equilibrium and entropy change on https://brainly.com/question/29696569

#SPJ1

Yes, confidentiality is a key aspect of data security that involves protecting data against unauthorized access and ensuring that it is used only for authorized purposes.

Confidentiality is important because it helps to prevent unauthorized individuals or organizations from gaining access to sensitive or confidential information, which could potentially be used for malicious purposes or to cause harm.

There are several ways to protect the confidentiality of data, including implementing strong access controls, encrypting data at rest and in transit, and regularly updating and patching software to prevent vulnerabilities that could be exploited by unauthorized users.

It is also important to have clear policies and procedures in place to govern how data can be accessed and used, and to ensure that authorized users understand and adhere to these policies.

To Know More About Encryption, Check Out

https://brainly.com/question/28283722

#SPJ4

A multimeter can test a range of a cable's electrical properties while you are working with copper cabling (as opposed to fiber optic cabling).

In practically every respect, fiber optic cables outperform copper-based lines. To begin with, they outperform copper cables in terms of performance, or the maximum data rate they can support.

Television, phone, and digital data signals are transmitted using fibre optic cables by sending light waves through flexible glass and plastic threads that resemble human hair. Construction: Thousands of clear glass fiber strands with a thickness of a human hair make up a fibre optic cable.

To learn more about cables visit:

brainly.com/question/29754776

#SPJ4

The given question is incomplete. The complete question is:

When you are working with copper cabling (as opposed to fiber optic), a _______ can check a variety of a cable's electrical characteristics.

A) loopback plug

B) protocol analyzer

C) toner probe

D) multimeter

The position of the transfer function's poles and zeros determines the maximum phase margin of a closed-loop system.

Loop, what is it?

A loop is a kind of programming structure that enables a segment of code to be repeated several times, either until a certain condition is fulfilled or a predetermined number of times. Loops are frequently used to automate repetitive activities, such as iterating through a list of data or running the same code again until a condition is fulfilled.

A loop is a set of instructions that are repeatedly carried out until a specific condition is met in computer programming.

To know more about loop
https://brainly.com/question/14390367
#SPJ4

The lowest phase-to-neutral voltage at which corona forms is known as the critical disruptive voltage. Vc represents it. Consider the following two parallel conductors with a distance d between them and a radius of r. Let V represent the voltage at the neutral phase.

Accordingly, the visual critical voltage is the lowest phase-neutral voltage at which the visual corona, or the development of the faint light glow of violet color all along the transmission line conductors, commences.

Electrical surface gradients and performance of a conductor are influenced by its voltage, diameter, and shape, as well as by contaminants like dust and water drops and surface abnormalities like scratches.

To know more about voltage visit :-

https://brainly.com/question/13521443

#SPJ1

130.5 kN  is internal normal force at point c.

The algebraic sum of the axial forces operating on either side of any segment of a structure is known as the normal force.

Support Reactions.a,

a+ΣMA = 0; By(60) - 1

Supporting Responses. Using the FBD of the full beam in Fig. an as a reference, a+MA = 0; By(6) - 1 2 (6)(6)(2) = 0 By = 6.00 kN

S+ ΣFx = 0; Bx = 0

Loadings within. Using Fig. b as an example, consider the FBD of the right segment of the beam sectioned via C.

S+ Σ Fx = 0; NC = 0 Ans. + cFy = 0; VC + 60.00 - 1. 2 (3)(3) = 0 VC

= -1.50 kN Ans. a+MC =

0; 60.00(3) - 1. 2 (3)(3)(1) - MC = 0

MC = 130.5

130.5 kN  is internal normal force at point c.

To learn more about internal normal force refer to:

https://brainly.com/question/18724171

#SPJ4

The Level 2 cache is lastly connected to the CPU but is external to it. The cache memory is made up of static random-access memory (SRAM).

CPU 2. 11. What results does using a processor with a larger cache produce? More room for frequently used data and instructions, more storage for extremely quick access, and faster instruction and data retrieval all result in faster processing.

A buffer between RAM and the CPU, cache memory is a very quick sort of memory. It stores data and instructions that are regularly requested so that the CPU can access them right away when necessary.

To know more about cache memory visit:-

https://brainly.com/question/16091648

#SPJ1