what is the oxidation state of the oxygen atoms in co2,h2o and o2 and what does this information tell you about photosynthesis and respiration

Answers

Answer 1

Answer:

-2, -2 and 0.

- Respiration is a process in which energy is produced and photosynthesis is a process in which energy is used.

Explanation:

Hello,

In this case, oxygen is a substance that is used for animals and us to acquire the energy necessary for several functions by the cellular respiration (we also need glucose), besides, it is a product of the photosynthesis carried out by vegetable cells (plants). Moreover, carbon dioxide and water are used by the plants to produce oxygen we need as well as glucose via the aforementioned photosynthesis, thus, both chemical reactions are shown below:

[tex]C_6H_{12}O_6+6O_2\rightarrow 6CO_2+6H_2O\ \ \ respiration\\\\6CO_2+6H_2O\rightarrow C_6H_{12}O_6+6O_2\ \ \ photosynthesis[/tex]

In such a way, since the oxygen in carbon dioxide and water has an oxidation state of -2 (reduced form) we can say that the respiration is a process in which energy is produced and since the oxygen yielded during the photosynthesis has an oxydation state of 0, we can say that photosynthesis is a process in which energy is used.

Best regards.


Related Questions

If the amount of radioactive iodine-123, used to treat thyroid cancer, in a sample decreases from 3.2 to 0.4 mg in 39.6 h, what is the half-life of iodine-123?

Answers

Answer:

Half life = 13.197 hour

Explanation:

Given:

Old amount (A₀) = 3.2

New amount (A) = 0.4

Radiation decay time (t) = 39.6 hour

Half life = T(1/2)

Find:

Half life = T(1/2) = T

Computation:

A = A₀[tex]e^{-(\frac{0.693t}{T} )}[/tex]

[tex]e^{-(\frac{0.693t}{T} )}[/tex] = 0.4 / 3.2

-[27.4428 / T] = In (0.125)

-[27.4428 / T] = -2.0794

[27.4428 / T] = 2.0794

T = 13.197

Half life = 13.197 hour

We discussed the different types of intermolecular forces in this lesson, which can affect the boiling point of a substance.
1. Which of these has the highest boiling point?
A) Ar
B) Kr
C) Xe
D) Ne
2. Which substance has the highest boiling point?
A) CH4
B) He
C) HF
D) Cl2

Answers

Answer:

1, C, Xe 2, B,He

Explanation:

1, cause as u go down a group the boiling point increases.

2, boiling point of single element is greater than a compound

According to  periodic trends in periodic table boiling point increases down the  group and hence Xe has highest boiling point and more amount of heat is required to boil an element hence He has highest boiling point.

What is periodic table?

Periodic table is a tabular arrangement of elements in the form of a table. In the periodic table, elements are arranged according to the modern periodic law which states that the properties of elements are a periodic function of their atomic numbers.

It is called as periodic because properties repeat after regular intervals of atomic numbers . It is a tabular arrangement consisting of seven horizontal rows called periods and eighteen vertical columns called groups.

Elements present in the same group have same number of valence electrons and hence have similar properties while elements present in the same period show gradual variation in properties due to addition of one electron for each successive element in a period.

Learn more about periodic table,here:

https://brainly.com/question/11155928

#SPJ2

How many equivalent resonance structures can be drawn for the molecule of SO3 without having to violate the octet rule on the sulfur atom

Answers

Answer:

3

Explanation:

Resonance is a valence bond concept put forward by Linus Pauling to explain the fact that the observed properties of a molecule may be as a result of the fact that its actual structure lie somewhere between a given number of structural extremes called canonical structures or resonance structures.

There are three resonance structures for SO3 that obey the octet rule. All the S-O bonds in SO3 are equivalent in these resonance structures.

Seven equivalent resonance structures for the molecular of SO3 can be drawn without breaking the octet rule.

We can arrive at this answer because:

The octet rule is a rule that states that an atom must reach stability when it has eight electrons in the valence layer.This means that in bonds that cause the donation or sharing of electrons between atoms, each atom has eight electrons in the valence layer.In chemistry, resonance is a term that refers to structures created to represent the donation or sharing of electrons between the atoms of a molecule.These structures can be arranged in different ways, as long as they respect the octet rule.

In an SO3 molecule, electrons are shared between atoms. This sharing can be done with seven resonance structures.

These structures are shown in the figure below.

More information:

https://brainly.com/question/8155254?referrer=searchResults

"What is the difference between the revertible and nonrevertible rII mutants that Benzer generated?"

Answers

The difference is that revertible is u are able to change back and get back what u once had non revertible is the opposite meaning,u can’t have what u once had.

What is the oxidizing agent in the redox reaction represented by the following cell notation? Ni(s) | Ni2+(aq) || Ag+(aq) | Ag(s)

Answers

Answer:

Silver.

Explanation:

Hello,

In this case, for the redox reaction:

[tex]Ni^0(s)+Ag^+(aq)\rightarrow Ni^{2+}+Ag^0(s)[/tex]

We can see the nickel is being oxidized as its oxidation state increases from 0 to 2+ whereas the oxidation state of silver decreases from +1 to 0, it means that the oxidizing agent is silver and the reducing agent is nickel.

Best regards.

The oxidizing agent in the redox reaction represented by the following cell notation is Silver.

Calculation of the oxidizing agent:

The redox reaction is

Ni(s) | Ni2+(aq) || Ag+(aq) | Ag(s)

here the nickel is being oxidized since its oxidation state rises from 0 to 2+ while on the other hand,  the oxidation state of silver is reduced from +1 to 0, it means that the oxidizing agent is silver and the reducing agent is nickel.

Learn more about reaction here: https://brainly.com/question/4241156

Which option draws the correct conclusion from the following case study?
A patient with sickle-cell anemia and a fever goes to the emergency room and is given Tylenol to reduce
the fever. The patient has seizures and dies after taking the Tylenol. The physician writes up this case as
an interesting outcome for a patient with sickle-cell anemia.
The case study's validity is obvious because it describes a real-life situation.
The case study was influenced by bias, and led to incorrect conclusions being drawn
The case study was not intended to produce a generalized conclusion about treatment
Upon reading this case study, physicians should stop treating sickle cell patients with fevers using Tylenol

Answers

Answer:

I believe the answer The case study was influenced by bias, and led to incorrect conclusions being drawn. plz correct me if I am wrong

Explanation:

Answer: options B

Explanation:

GIVING 100 POINTS PLEASE ANSWER SOON When ponds freeze, they freeze at the surface first before freezing at the bottom. Which property of water explains why this might happen? Density Adhesion High boiling point High specific heat

Answers

Answer:

[tex]\huge\boxed{Density}[/tex]

Explanation:

This is because of density. Since Ice is less dense than water, the ice even formed inside the pond then starts floating on the surface of water. Because of this density, Ice floats on water and thus the water freezes at the surface.

Answer:

Density

Explanation:

Water is less dense as a solid than as a liquid, so as ponds freeze, the ice floats at the top and the pond freezes from the top-down.

A reaction mechanism has the following proposed elementary steps:Step 1: A → B + CStep 2: A + B → DStep 3: 2 A + D → C + EIf Step 2 is the rate-limiting step, what would the proposed rate law for this mechanism be?

Answers

Answer: [tex]Rate=k[A][B][/tex]

Explanation:

Rate law says that rate of a reaction is directly proportional to the concentration of the reactants each raised to a stoichiometric coefficient determined experimentally called as order.

Order of the reaction is defined as the sum of the concentration of terms on which the rate of the reaction actually depends. It is the sum of the exponents of the molar concentration in the rate law expression.

For reactions which takes place in multiple steps are complex reactions and the order is given by the slowest step which is the rate limiting step.

For the given reaction, the rate limiting step is

[tex]A+B\rightarrow D[/tex]

Rate law will be , [tex]Rate=k[A][B][/tex]

Calculate the amount of heat that must be absorbed by 10.0 g of ice at –20°C to convert it to liquid water at 60.0°C. Given: specific heat (ice) = 2.1 J/g·°C; specific heat (water) = 4.18 J/g·°C; ΔH fus = 6.0 kJ/mol.

Answers

Answer:

The amount of heat to absorb is 6,261 J

Explanation:

Calorimetry is in charge of measuring the amount of heat generated or lost in certain physical or chemical processes.

The total energy required is the sum of the energy to heat the ice from -20 ° C to ice of 0 ° C, melting the ice of 0 ° C in 0 ° C water and finally heating the water to 60 ° C.

So:

Heat required to raise the temperature of ice from -20 °C to 0 °C

Being the sensible heat of a body the amount of heat received or transferred by a body when it undergoes a temperature variation (Δt) without there being a change of physical state (solid, liquid or gaseous), the expression is used:

Q = c * m * ΔT

Where Q is the heat exchanged by a body of mass m, made up of a specific heat substance c and where ΔT is the temperature variation (ΔT=Tfinal - Tinitial).

In this case, m= 10 g, specific heat of the ice= 2.1 [tex]\frac{J}{g*C}[/tex] and ΔT=0 C - (-20 C)= 20 C

Replacing: Q= 10 g*2.1 [tex]\frac{J}{g*C}[/tex] *20 C and solving: Q=420 J

Heat required to convert 0 °C ice to 0 °C water

The heat Q necessary to melt a substance depends on its mass m and on the called latent heat of fusion of each substance:

Q= m* ΔHfusion

In this case, being 1 mol of water= 18 grams: Q= 10 g*[tex]6.0 \frac{kJ}{mol} *\frac{1 mol of water}{18 g}[/tex]= 3.333 kJ= 3,333 J (being kJ=1,000 J)

Heat required to raise the temperature of water from 0 °C to 60 °C

In this case the expression used in the first step is used, but being: m= 10 g, specific heat of the water= 4.18 [tex]\frac{J}{g*C}[/tex] and ΔT=60 C - (0 C)= 60 C

Replacing: Q= 10 g*4.18 [tex]\frac{J}{g*C}[/tex] *60 C and solving: Q=2,508 J

Finally, Qtotal= 420 J + 3,333 J + 2,508 J

Qtotal= 6,261 J

The amount of heat to absorb is 6,261 J

The amount of heat to absorb is 6,261 J.

Calculation for heat:

Heat required to raise the temperature of ice from -20 °C to 0 °C.

The formula for specific heat is used to calculate the amount of heat

Q = c * m * ΔT

Where,

Q =heat exchanged by a body,

m= mass of the body

c= specific heat

ΔT= change in temperature

Given:

m= 10 g,

specific heat of the ice= 2.1

ΔT=0 C - (-20 C)= 20 C

On substituting the values:

Q= 10 g*2.1  *20 C

Q=420 J

Heat required to convert 0 °C ice to 0 °C water.

The heat Q necessary to melt a substance depends on its mass m and on the called latent heat of fusion of each substance:

Q= m* ΔHfusion

Heat required to raise the temperature of water from 0 °C to 60 °C

m= 10 g,

Specific heat of the water= 4.18  

ΔT=60 C - (0 C)= 60 C

On substituting:

Q= 10 g*4.18  *60 C

Q=2,508 J

Thus, Qtotal= 420 J + 3,333 J + 2,508 J

Qtotal= 6,261 J

The amount of heat to absorb is 6,261 J

Find more information about Specific heat here:

brainly.com/question/13439286

Compare and contrast an electrolytic cell with a voltaic cell. Provide one example where both are present in daily life.

Answers

Answer:

ELECTROLYTIC CELL

An electrochemical cell in which a non-spontaneous chemical reaction takes place when electric current is passed through the solution,is called an electrolytic cell.

EXAMPLE

Nelsons cell and Downs cell

VOLTAIC CELL OR GALVANIC CELL

The electrochemical cell in which a spontaneous chemical reaction takes place and generates electric current is called galvanic and voltaic cell.

EXAMPLE

Daniel cell

Explanation:

Electrolytic cell by the non-spontaneous reactions covert the chemical energy into electical and volataic cells are those in which spontaneous redox reaction takes place.

What is cell?

Cell is a device which converts chemical energy into electrical energy.

Electrolytic Cell: An electrolytic cell is an electrochemical cell in which a non-spontaneous redox chemical reaction occurs when an electric current is conducted through the solution.

Example- Electrolysis of sodium chloride, by which formation of sodium metal and chlorine gas takes place.

Voltaic cell: Voltaic cells are electrochemical cells in which a spontaneous redox chemical reaction occurs and creates electric current. These cells are also known by the name of Galvanic cells.

Example- It is used in the form of batteries which can be portable easily.

Hence, in electrolytic cells non - spontaneous reaction occur and in voltaic cell spontaneous reaction is occured.

To know more about cells, visit the below link:

https://brainly.com/question/1172236

#SPJ2

How many valence electrons must two atoms share to form a single covalent bond? answers A.2 B.4 C.3 D.1

Answers

Answer:

2

Explanation:

A single covalent bond is formed when two electrons are shared between the same two atoms, one electron from each atom.

Answer:

the answer is 2

Explanation:

Draw two constitutional isomers that share the molecular formula C3H8S. Your structures will have the same molecular formula but will have different connectivities.

Answers

Answer:

Two constitutional isomers for the compound C3H8S are shown in the attachment below

Explanation:

Constitutional isomers are isomers that have the same molecular formula but different connectivity. Two constitutional isomers for the compound C3H8S are shown in the attachment below.

As per the concept of structural isomers, the  two constitutional isomers that share the molecular formula C₃H₈S are attached in attachment below.

Structural isomers are defined as the isomers  in which atoms are completely  arranged  in a different order but the molecular formula remains the same.

They are the molecules which have same molecular formula but different  connectivities  of atoms  which depend on the order they are put together. An increase in the number of carbon atoms leads to an increase  in the structural isomers.

Learn more about structural isomers,here:

https://brainly.com/question/33929317

#SPJ6

When methane is burned with oxygen, the products are carbon dioxide and water. If you produce 9 grams of water and 11 grams of carbon dioxide from 16 grams of oxygen, how many

Answers

The given question is incomplete.

The complete question is:

When methane is burned with oxygen, the products are carbon dioxide and water. If you produce 9 grams of water and 11 grams of carbon dioxide from 16 grams of oxygen, how many grams of methane were needed for the reaction?

Answer: 4 grams of methane were needed for the reaction

Explanation:

According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.

{tex]CH_4+2O_2\rightarrow CO_2+H_2O[/tex]

Given:  mass of oxygen = 16 g

Mass of carbon dioxide = 11 g

Mass of water = 9 g

Mass of products = Mass of carbon dioxide + mass of water = 11 g  +9 g = 20 g

Mass or reactant = mass of methane + mass of oxygen = mass of methane + 16 g

As mass of reactants = mass of products

mass of methane + 16 g= 20 g

mass of methane  = 4 g

Thus 4 grams of methane were needed for the reaction

Will a precipitate (ppt) form when 300. mL of 2.0 × 10 –5 M AgNO 3 are added to 200. mL of 2.5 × 10 –9 M NaI? Answer yes or no, and identify the precipitate if there is one

Answers

Answer:

A precipitate will form, AgI

Explanation:

When Ag⁺ and I⁻ ions are in an aqueous media, AgI(s), a precipitate, is produced or not based on its Ksp expression:

Ksp = 8.3x10⁻¹⁷ = [Ag⁺] [I⁻]

Where the concentrations of the ions are the concentrations in equilibrium

For actual concentrations of a solution, you can define Q, reaction quotient, as:

Q = [Ag⁺] [I⁻]

If Q > Ksp, the ions will react producing BaCO₃, if not, no precipitate will form.

Actual concentrations of Ag⁺ and I⁻ are:

[Ag⁺] = [AgNO₃] = 2.0x10⁻⁵ × (300mL / 500.0mL) = 1.2x10⁻⁵M

[I⁻] = [NaI] = 2.5x10⁻⁹ × (200mL / 500.0mL) = 1.0x10⁻⁹M

500.0mL is the volume of the mixture of the solutions

Replacing in Q expression:

Q = [Ag⁺] [I⁻]

Q = [1.2x10⁻⁵M] [1.0x10⁻⁹M]

Q = 1.2x10⁻¹⁴

As Q > Ksp

A precipitate will form, AgI

One hundred fifty joules of heat are removed from a heat reservoir at a temperature of 150 K. What is the entropy change of the reservoir (in J/K)?

Answers

Answer:

ΔS surrounding (entropy change of the reservoir) = -1 J/K

Explanation:

Given:

Change in heat (ΔH) = 150 joules

Temperature (T) = 150 K

Find:

ΔS surrounding (entropy change of the reservoir)

Computation:

ΔS surrounding (entropy change of the reservoir) = - ΔH / T

ΔS surrounding (entropy change of the reservoir) = - 150 / 150

ΔS surrounding (entropy change of the reservoir) = -1 J/K

Wine goes bad soon after opening because the ethanol dissolved in it reacts with oxygen gas to form water and aqueous acetic acid , the main ingredient in vinegar. Calculate the moles of oxygen needed to produce of acetic acid. Be sure your answer has a unit symbol, if necessary, and round it to significant digits.

Answers

Answer:

0.500 moles of oxygen

Explanation:

Full question says: "Calculate the moles of oxygen needed to produce 0.500 moles of acetic acid.

The reaction of ethanol (C₂H₅OH) with oxygen (O₂) is:

C₂H₅OH + O₂ → CH₃COOH + H₂O

Where 1 mole of ethanol reacts per mole of oxygen to produce 1 mole of acetic acid (CH₃COOH) and 1 mole of water

Based on the chemical equation (1 mole of oxygen produce 1 mole of acetic acid; Ratio 1:1). Thus, if you want to produce 0.500 moles of acetic acid you will need:

0.500 moles of oxygen

Plzzz help and solve this using factor labeling

Answers

Answer:

there are 37,8541 liters in 10 gallons

The second law of thermodynamics predicts that heat flow from a cooler object to a hotter object:________
a) will be spontaneous at high pressure
b) will be spontaneous at low pressure
c) will never be spontaneous at any pressure
d) will always be spontaneous

Answers

Answer:

c) will never be spontaneous at any pressure.

Explanation:

Hello,

In this case, we need to remember that the second law of thermodynamics states that heat flow is transferred from a hot object to a cold object only, never the other way around, therefore, the answer is c) will never be spontaneous at any pressure. This is supported by driving force that in this case is the temperature difference which must be negative for the hot object (it gets eventually cold) and positive for the cold object (it gets eventually hot) until they reach the equilibrium temperature.

Best regards.

A chemist prepares a solution of silver(I) nitrate(AgNO3) by measuring out 269. mu mol of silver(I) nitrate into a 300. mL volumetric flask and filling the flask to the mark with water. Calculate the concentration in mmol/L of the chemist's silver(I) nitrate solution.

Answers

Answer:

concentration   in    mmol/L = 8.97 × 10⁻¹ mmol/L

Explanation:

Given that:

the number of moles of  silver(I) nitrate(AgNO3) the chemist used in preparing a solution = 269 mmol = 269 × 10⁻³ mmol

The volume of the volumetric flask = 300 mL  = 300 × 10⁻³ L

In order to calculate the concentration in mmol/L of the chemist's silver(I) nitrate (AgNO3) solution , we used the formula which can be expressed as;

[tex]concentration \ in \ mmol/L = \dfrac{ number \ of \ mmol}{vol. \ of \ the \ solution}[/tex]

[tex]concentration \ in \ mmol/L = \dfrac{ 269 * 10^{-3 } \ mmol }{300 * 10^{-3} \ L }[/tex]

concentration   in    mmol/L = 0.8966   mmol/L

concentration   in    mmol/L = 8.97 × 10⁻¹ mmol/L

Which element always exists in monatomic form? silicon, a metalloid oxygen, a nonmetal calcium, a metal neon, a noble gas

Answers

Answer:

[tex]\huge\boxed{A \ noble \ gas}[/tex]

Explanation:

A noble gas always exists in a mono-atomic form. This is because the valency of noble gas is zero and thus they don't tend to lose, gain or share electrons. They are inert gases and do not react.

Answer:

a noble gas

Explanation:

the the noble gases exist as mono atomic elements that is helium, neon ,argon, Krypton,etc.

mono atomic elements exist as stable single atoms

A sample of carbon dioxide gas has a density of g/L at a pressure of 0.889 atm and a temperature of 55.0 °C. Assume ideal behavior,occupies a volume of 686 mL. If the gas is heated at constant pressure until its volume is 913 mL, the temperature of the gas sample will be:_______ ? °C.

Answers

Answer:

163.5 °C

Explanation:

The following data were obtained from the question:

Initial volume (V1) = 686 mL.

Initial temperature (T1) = 55 °C.

Final volume (V2) = 913 mL

Initial pressure (P1) = final pressure (P2) = 0.889 atm

Final temperature (T2) =.?

Next, we shall convert celsius temperature to Kelvin temperature.

This can be done as shown below:

Temperature (K) = Temperature (°C) + 273

T(K) = T (°C) + 273

Initial temperature (T1) = 55 °C.

Initial temperature (T1) = 55 °C + 273

Initial temperature (T1) = 328 K

Next, we shall determine the new temperature of the gas.

Since the pressure is constant, we shall determine the new temperature as follow:

V1/T1 = V2 /T2

Initial volume (V1) = 686 mL.

Final volume (V2) = 913 mL

Initial temperature (T1) = 328 K

Final temperature (T2) =.?

V1/T1 = V2 /T2

686/328 = 913/T2

Cross multiply

686 x T2 = 328 x 913

Divide both side by 686

T2 = (328 x 913)/686

T2 = 436.5 K

Finally, we shall convert Kelvin temperature to celsius temperature.

This can be done as shown below:

Temperature (°C) = Temperature (K) – 273

T (°C) = T(K) – 273

T(K) = 436.5 K

T (°C) = 436.5 – 273

T (°C) = 163.5 °C

Therefore, the temperature of the gas sample is 163.5 °C.

What is advertising used for? Check all that apply. influencing consumer tastes tracking product popularity increasing product awareness promoting company branding gathering data about potential consumers

Answers

Answer:

influencing consumer tastes

increasing product awareness

promoting company branding

Explanation:

Advertising is basically a form of communication using creative ideas and communicating benefits of the products. Advertising plays a very crucial role in product business and some of the important uses of advertising are as follows:

Creative advertisements, influence customers or consumers to buy the product.Advertisings involve information regarding the product and so increases product awareness.Advertising on social media platforms, TVs, radio and newspapers, promotes company branding.

Hence, the correct options are:

influencing consumer tastesincreasing product awarenesspromoting company branding

Answer:

1,3,4

Explanation:

I took the test

Write the half-reactions as they occur at each electrode and the net cell reaction for this electrochemical cell containing indium and cadmium. In(s)|

Answers

Answer:

Oxidation half equation;

3Cd(s) -------> 3Cd^2+(aq) + 6e

Reduction half equation;

2In^3+(aq) + 6e -----> 2In(s)

Explanation:

Since the reduction potentials of Indium and Cadmium are -0.34 V and - 0.40 V respectively, we can see that cadmium will be oxidized while indium will the reduced.

We arrived at this conclusion by examining the reduction potential of both species. The specie with more negative reduction potential is oxidized in the process.

Oxidation half equation;

3Cd(s) -------> 3Cd^2+(aq) + 6e

Reduction half equation;

2In^3+(aq) + 6e -----> 2In(s)

Determine the percent water in Cuso4.5H20 to 3 significant figures

Answers

Answer:

Molar mass is the mass of one mole of a substance and is ontained by adding atomic mases of all the constituent atoms and group of atoms.

Atomic masses: Cu = 63.55 g/mol,

S = 32.07 g/mol

O x 4 = 16.00 g/mol x 4 = 64.00 g/mol

H = 1.008 g/mol,

So, H2O = (2*1.008+16.00)*5 = 90.10 g/mol

Molar mass of CuSO4,5H2O = 249.72 g/mol.

Out of that 249.72 grams, 90.10 grams is water,

So, percentage by mass of water in CuSO4,5H2O

= 90.10*100/249.72 = 36.08.

I think this is what you are asking. hope this helps

A 1.00 liter flask initially contained 0.24 mol NO2 at 700 K which decomposed according to the following equation. When equilibrium was achieved, 0.14 mol NO was present. Calculate Kc. 2NO2(g) ↔ 2NO(g) + O2(g)

Answers

Answer:

[tex]Kc=0.14[/tex]

Explanation:

Hello,

In this case, for the given reaction, the equilibrium expression is:

[tex]Kc=\frac{[NO]^2[O_2]}{[NO_2]^2}[/tex]

That in terms of the reaction extent [tex]x[/tex] is written as (initial concentration of NO2 is 0.24 M for 0.24 mol in 1.00 L):

[tex]Kc=\frac{(2*x)^2(x)}{(0.24M-2*x)^2}[/tex]

Moreover, since at the equilibrium 0.14 moles of NO are present (a 0.14-M concentration), we can compute the reaction extent as shown below:

[tex][NO]=2*x=0.14M[/tex]

[tex]x=0.14M/2=0.07M[/tex]

In such a way, knowing [tex]x[/tex], we compute Kc as shown below:

[tex]Kc=\frac{(2*0.07)^2(0.07)}{(0.24M-2*0.07)^2}\\\\Kc=0.14[/tex]

Regards.

The kc is 0.14.

Equivalent expression:

Since

[tex]Kc = \frac{[NO]^2[O_2]}{[NO_2]^2}\\\\[/tex]

Here the reaction extent x should be written like the initial concentration of NO2 is 0.24 M for 0.24 mol in 1.00 L.

Now

[tex]Kc = \frac{(2\times\ x)^2}{(0.24M - 2\times x)^2}[/tex]

Since at the equilibrium 0.14 moles of NO are presented so the reaction should be

NO = 2*x = 0.14m

x = 0.07

Now kc should be

[tex]= \frac{(2\times 0.07)^2 (0.07)}{(0.24M - 2\times 0.07)^2}[/tex]

= 0.14

Learn more about equation here: https://brainly.com/question/24710653

Determine whether the following statement about reaction rates is true or false. If the statement is false, select the reason why?

Increasing the temperature of a reaction system decreases the activation energy of the reaction.

Answers

Answer:

False

Explanation:

Reaction rates is a field under chemical kinetics that deals with the measure of speed of a chemical reaction. It is the change in the concentration of a reactant or product per unit time.

Activation Energy is a theory been  put forward to explain why different chemical reactions proceed at different rates.

Activation Energy theory postulates that for a reactant to transform into a product , the colliding particles or molecules of the reactant must possess a certain amount of energy so as to overcome the reaction barrier.

An important factor which may influence the attainment of activation energy by colliding particles of reactants is the temperature at which the reaction is carried out. The higher the temperature, the  greater is the fraction of the reactant particles which possess the activation energy and thus the faster the reaction becomes. SO , in essence increasing the temperature of a reaction system do not decreases the activation energy of the reaction but rather also increases  the activation energy of the reaction.

An enzyme is discovered that catalyzes the chemical reaction:SAD -------->HAPPY
<-------A team of motivated researchers sets out to study the enzyme which they call Happyase. They find that the Kcat for happyase is 600s-1. They carry out several experiments. When [Et]=20 nM and [SAD]=40 \mu M, the reaction velocity, Vo is 9.6 \mu Ms^{-1} . Calculate the Km for the substrate SAD.

Answers

Answer: Km = 10μM

Explanation: Michaelis-Menten constant (Km) measures the affinity a enzyme has to its substrate, so it can be known how well an enzyme is suited to the substrate being used. To determine Km another value associated to an eznyme is important: Turnover number (Kcat), which is the number of time an enzyme site converts substrate into product per unit time.

Enzyme veolcity is calculated as:

[tex]V_{0} = \frac{E_{t}.K_{cat}.[substrate]}{K_{m}+[substrate]}[/tex]

where Et is concentration of enzyme catalitic sites and has to have the same unit as velocity of enzyme, so Et = 20nM = 0.02μM;

To calculate Km:

[tex]V_{0}*K_{m} + V_{0}*[substrate] = E_{t}.K_{cat}.[substrate][/tex]

[tex]K_{m} = \frac{E_{t}.K_{cat}.[substrate]-V_{0}*[substrate]}{V_{0}}[/tex]

[tex]K_{m} = \frac{0.02*600*40-9.6*40}{9.6}[/tex]

Km = 10μM

The Michaelis-Menten for the substrate SAD is 10μM.

In which pair do both compounds exhibit predominantly ionic bonding? A) KCl and CO2 B) SO2 and BaF2 C) F2 and N2O D) N2O3 and Rb2O E) NaF and SrO

Answers

Answer:

E) NaF and SrO

Explanation:

The ionic bonding occurs between atoms with a great difference in electronegativity. This usually happens between a metal and a non-metal.

In which pair do both compounds exhibit predominantly ionic bonding?

A) KCl and CO₂. NO. C and O are non-metals and present covalent bonding.

B) SO₂ and BaF₂. NO. S and O are non-metals and present covalent bonding.

C) F₂ and N₂O. NO. Both compounds contain non-metals and present covalent bonding.

D) N₂O₃ and Rb₂O. NO. N and O are non-metals and present covalent bonding.

E) NaF and SrO. YES. Na and Sr are metals while F and O are non-metals.

g Does a reaction occur when aqueous solutions of barium hydroxide and aluminum sulfate are combined

Answers

Answer:

3BaO + Al₂(SO₄)₃  →  Al₂O₃+ 3BaSO₄

Explanation:

Yes! A reactiin occurs between barium hydroxide and auminium sulphate.

barium sulfate (BaSO4) and aluminum hydroxide (Al(OH)3) are the products obtained in this reaction.

The reaction is given by the equation below;

3BaO + Al₂(SO₄)₃  →  Al₂O₃+ 3BaSO₄

What is the relationship between concentration and rate of reaction?
not related
directly proportional
Inversely proportional
partially related

Answers

Explanation:

The answer is directly proportional, because when there is more concentration their will more reactants to react fast diring the chemical reaction which increases the rate of chemical reaction.

So, we can state that the relationship between them are directly proportional.

Hope it helps...

Other Questions
The ratio of boys to girls in the ninth grade is 7 to 9. there are 218 girls set up a proportion to model this information Can anyone make 1 or 2 rhyming song line Topic : mom scolding her daughter (Amanda) for not doing her homework or she is not cleaning her room An ac source of period T and maximum voltage V is connected to a single unknown ideal element that is either a resistor, and inductor, or a capacitor. At time t = 0 the voltage is zero. At time t = T/4 the current in the unknown element is equal to zero, and at time t = T/2 the current is I = -Imax, where Imax is the current amplitude. What is the unknown element? A client with traumatic brain injury is able to live in a supportive home environment and complete light housekeeping and laundry. What area is most appropriate for the COTA to address next with the client?A. Practice shopping skillsB. Establish a self-care routineC. Reestablish skills for washing a carD. Provide a noise-free environment Design a program that gives simple math quizzes. The program should display two random numbers that are to be added, such as: 247 + 129 The program should allow the student to enter the answer. If the answer is correct, a message of congratulations should be displayed. If the answer is incorrect, a message showing the correct answer should be PLEASE HELP ME WITH THIS QUESTION Suppose that the market for candy canes operates under conditions of perfect competition, that it is initially in long-run equilibrium, and that the price of each candy cane is $0.20. Now suppose that the price of sugar falls, decreasing the marginal and average total costs of producing candy canes by $0.15. Based on the information given, we can conclude that in the short run a typical producer of candy canes will be making: The health food store that you manage employs 7 clerks. Individual hourly wages are $8.10, $8.25, $8.45, $8.75, $9.00, $9.25, and $10.50. If each employee has 2 weeks unpaid vacation and works 8 hours a day , 5 days per week and is paid for all holidays , what the total annual payroll for the clerks ? In what year did Communism stop? Please answer all 3 questions if you know it! The answers on the picture are not fully correct just random ones I clicked. In the consensus case, what is Amazon's enterprise value on the valuation date using the exit multiple terminal value U.S. human rights policy in the 20th and 21st centuries tried to balance theneed to promote human rights abroad with the need toO A. encourage democracyO B. build a superior militaryC. choose battles and avoid overreachO D. refrain from judging other cultures An elements most stable ion forms an ionic compound with bromine, having the formula XBr2. If the ion of element "X" has a mass number of 230 and has 86 electrons, what is the identity of the element, and how many neutrons does it have? In the context of early advertising, the invention of the _____ made advertising via posters, handbills, and signs possible. who are the two white women zora meets and why are they at her school Q3 Who did babur deafet In the first Battle of panipat ? Geography is the study of __________. A. the Earths surface B. the interior of the Earth and its impact on the Earths surface C. ancient cultures D. animal populations Find the value of mADC.A. 90B. 117C. 18D. 24 If I chose a number uniformly from the integers from 1 to 25, calculate the conditional probability that the number is a multiple of 6 (including 6) given that it is larger than 18. Predict the order of acid strengths in the following series of cationic species: CH3CH2NH3+, CH3CH=NH2+ and CH3C-NH+