What is the molarity of 4 g of NaCl dissolved in 100mL of water?

Answer:

[tex]M_{acid}=0.141M[/tex]

Explanation:

Hello,

In this case, the reaction between sulfuric acid and hydroxide is:

[tex]H_2SO_4+2NaOH\rightarrow Na_2SO_4+2H_2O[/tex]

We can notice a 1:2 molar ratio between the acid and the base respectively, therefore, at the equivalence point we have:

[tex]2*n_{acid}=n_{base}[/tex]

And in terms of volumes and concentrations:

[tex]2*M_{acid}V_{acid}=M_{base}V_{base}[/tex]

So we compute the molarity of sulfuric acid as shown below:

[tex]M_{acid}=\frac{M_{base}V_{base}}{2*V_{acid}} =\frac{0.100M*28.15mL}{2*10.0mL}\\ \\M_{acid}=0.141M[/tex]

Best regards.

The correct answer is 3 liters

Explanation:

If a substance has a solubility of [tex]12 \frac{grams}{liter}[/tex], this means in 1 liter, the grams that can be dissolved are 12 grams. Now, considering Justin and Ellie need to dissolve 36 grams to calculate the number of liters just divide the total of grams into 12 as each liter dissolves only 12 grams. The process is shown below:

36 grams (the amount that will be dissolved) ÷ 12 (grames dissolved per liter) = 3 liters (liters to dissolved 36 grams)

Answer:

It would be 3 liters

Explanation:

Answer:

4.16x10⁻³m

Explanation:

Molality is defined as the ratio between moles of a solute, in this case glucose, and kg of solvent.

As there are 100g of solvent, the kg are 0.1. Thus, we only need to calculate from the mass of glucose its moles to solve the molality of the solution.

Moles glucose:

There are 75mg = 0.075g of glucose. To conver mass to moles it is necessary molar mass.

Molar mass glucose:

6C = 12.01g/mol*6 = 72.06g/mol

12H = 12*1.008g/mol = 12.10g/mol

6O = 6*16g/mol = 96g/mol

72.06 + 12.10 + 96 = 180.16g/mol

Moles of 0.075g of glucose:

0.075g * (1 mol / 180.16g) =

4.16x10⁻⁴ moles of glucose

Molality of the solution:

4.16x10⁻⁴ moles of glucose / 0.1kg of solvent =

The molarity of the solution is 4.16x10⁻³m

We know that the molarity refers to the ratio that arise between the moles of a solute.

Since there are 100 g of solvent so here the kg should be 0.1.

Likewise there is 75 mg so it should be 0.075g

Now the Molar mass glucose should be

6C = 12.01g/mol*6 = 72.06g/mol

12H = 12*1.008g/mol = 12.10g/mol

6O = 6*16g/mol = 96g/mol

So,

= 72.06 + 12.10 + 96

= 180.16g/mol

Now

Moles of 0.075g of glucose:

0.075g * (1 mol / 180.16g) =

4.16x10⁻⁴ moles of glucose

Now finally

Molality of the solution:

= 4.16x10⁻⁴ moles of glucose / 0.1kg of solvent

=4.16x10⁻³m

learn more about molarity here: https://brainly.com/question/13011592

Explanation:

using boyles law

p1v1=p2v2

735 x 1.76 = 700 x V2

1293.6 = 700 x V2

V2 = 1293.6/700

V2 = 1.85L

Answer:

Following are the answer to this question:

Explanation:

For the reductive amination of its carbonyl group, amino acids could be synthesized by reducing ammunition, which can be synthesized in the given attachment file:

please find the attachment:

Answer:

Two constitutional isomers for the compound C3H8S are shown in the attachment below

Explanation:

Constitutional isomers are isomers that have the same molecular formula but different connectivity. Two constitutional isomers for the compound C3H8S are shown in the attachment below.

As per the concept of structural isomers, the  two constitutional isomers that share the molecular formula C₃H₈S are attached in attachment below.

Structural isomers are defined as the isomers  in which atoms are completely  arranged  in a different order but the molecular formula remains the same.

They are the molecules which have same molecular formula but different  connectivities  of atoms  which depend on the order they are put together. An increase in the number of carbon atoms leads to an increase  in the structural isomers.

Learn more about structural isomers,here:

https://brainly.com/question/33929317

#SPJ6

Answer:

In basic conditions that is ( pH > 7 ), the equilibrium shifts towards right and produces a lot of (-ve) negatively charged fatty acids which are polar, In water, since they have long hydrophobic hydrocarbon part, this form micelles where the hydrocarbon part  remain inside the  sphere and -coo- group remain outside the sphere due to H-bonding interaction with water.

At ( pH < 5 ) I.e acidic conditions, the equilibrium shift to the left giving neutral molecules which can not have stronger H-bonding interaction .

So micelles cant form as they become insoluble.

Answer:

D) 65.7%

Explanation:

Based on the reaction:

2H2(g)+O2(g)⟶2H2O(l)

2 moles of hydrogen produce 2 moles of water assuming an excess of oxygen.

To find percent yield of the reaction we need to find theoretical yield (The yield assuming all hydrogen reacts producing water). With theoretical yield and actual yield (32.8g H₂O) we can determine percent yield as 100 times the ratio between actual yield and theoretical yield.

Theoretical yield:

Moles of 5.58g H₂:

5.58g H₂ ₓ (1 mol / 2.016g) = 2.768 moles H₂

As 2 moles of H₂ produce 2 moles of H₂O, if all hydrogen reacts will produce 2.768 moles H₂O. In grams:

2.768 moles H₂O ₓ (18.015g / mol) =

49.86g H₂O is theoretical yield

Percent yield:

Percent yield = Actual yield / Theoretical yield ₓ 100

32.8g H₂O / 49.86g ₓ 100 =

65.7% is percent yield of the reaction

Answer:

[tex]1.242 \times 10^{25}\text{ atoms H}[/tex]

Explanation:

You must convert the mass of B₄H₁₀ to moles of B₄H₁₀, then to molecules of B₄H₁₀, and finally to atoms of H.

1. Moles of B₄H₁₀

[tex]\text{Moles of B$_{4}$H}_{10} = \text{110.0 g B$_{4}$H}_{10} \times \dfrac{\text{1 mol B$_{4}$H}_{10}}{\text{53.32 g B$_{4}$H}_{10}} = \text{2.063 mol B$_{4}$H}_{10}[/tex]

2. Molecules of B₄H₁₀

[tex]\text{No. of molecules} = \text{2.063 mol B$_{4}$H}_{10} \times \dfrac{6.022 \times 10^{23}\text{ molecules B$_{4}$H}_{10}}{\text{1 mol B$_{4}$H}_{10}}\\\\=1.242 \times 10^{24}\text{ molecules B$_{4}$H}_{10}[/tex]

3. Atoms of H

[tex]\text{Atoms of H} = 1.242 \times 10^{24}\text{ molecules B$_{4}$H}_{10} \times \dfrac{\text{10 atoms H}}{\text{1 molecule B$_{4}$H}_{10}}\\\\= \mathbf{1.242 \times 10^{25}}\textbf{ atoms H}[/tex]

Answer:

A. mm,cm,m,Km

B. mg, g, Kg

C. mL,L

D. ms, s, min, h

Explanation:

Answer:

The empirical formula of the compound is NO2.

Explanation:

The following data were obtained from the question:

Mass of compound = 30.5 g

Mass of nitrogen (N) = 9.29 g

Empirical formula of compound =?

Next, we shall determine the mass of oxygen in the compound. This can be obtained as follow:

Mass of compound = 30.5 g

Mass of nitrogen (N) = 9.29 g

Mass of oxygen (O) =?

Mass of O = mass of compound – mass of N.

Mass of O = 30.5 – 9.29

Mass of O = 21.21 g

Finally, we shall determine the empirical formula of the compound as follow:

Mass of nitrogen (N) = 9.29 g

Mass of oxygen (O) = 21.21 g

Divide by their molar mass.

N = 9.29 / 14 = 0.664

O = 21.21 / 16 = 1.326

Divide by the smallest

N = 0.664/ 0.664 = 1

O = 1.326/ 0.664 = 2

Therefore the empirical formula of the compound is NO2.

Answer:

-2, -2 and 0.

- Respiration is a process in which energy is produced and photosynthesis is a process in which energy is used.

Explanation:

Hello,

In this case, oxygen is a substance that is used for animals and us to acquire the energy necessary for several functions by the cellular respiration (we also need glucose), besides, it is a product of the photosynthesis carried out by vegetable cells (plants). Moreover, carbon dioxide and water are used by the plants to produce oxygen we need as well as glucose via the aforementioned photosynthesis, thus, both chemical reactions are shown below:

[tex]C_6H_{12}O_6+6O_2\rightarrow 6CO_2+6H_2O\ \ \ respiration\\\\6CO_2+6H_2O\rightarrow C_6H_{12}O_6+6O_2\ \ \ photosynthesis[/tex]

In such a way, since the oxygen in carbon dioxide and water has an oxidation state of -2 (reduced form) we can say that the respiration is a process in which energy is produced and since the oxygen yielded during the photosynthesis has an oxydation state of 0, we can say that photosynthesis is a process in which energy is used.

Best regards.

Answer:

[tex]\huge\boxed{Density}[/tex]

Explanation:

This is because of density. Since Ice is less dense than water, the ice even formed inside the pond then starts floating on the surface of water. Because of this density, Ice floats on water and thus the water freezes at the surface.

Answer:

Density

Explanation:

Water is less dense as a solid than as a liquid, so as ponds freeze, the ice floats at the top and the pond freezes from the top-down.

Answer:

mol LiCl = 4.83 m

Explanation:

GIven:

Solution of LiCl in water XLiCl = 0.0800

Mol of water in kg = 55.55 mole

Find:

Molality

Computation:

mole fraction = mol LiCl / (mol water + mol LiCl)

0.0800 = mol LiCl / (55.55 mol + mol LiCl)

0.0800 mol LiCl + 4.444 mol = mol LiCl

mol LiCl - 0.0800 mol LiCl = 4.444 mol

0.92 mol LiCl = 4.444 mol

mol LiCl = 4.83 m

Answer:

Mass = 11.688g

Explanation:

Volume = 2.00L

Molar concentration = 0.100M

Mass = ?

These quantities are relatted by the following equation;

Conc = Number of moles / volume

Number of moles = Conc * Volume = 2 * 0.100 = 0.2 mol

Number of moles = Mass / Molar mass

Mass = Number of moles * Molar mass

Mass = 0.2mol * 58.44g/mol

Mass = 11.688g

Answer:

The answer is

Explanation:

The Ka of an acid when given the pH and concentration can be found by

where

c is the concentration of the acid

From the question

pH = 5.82

c = 0.010 M

Substitute the values into the above formula and solve for Ka

We have

Multiply through by - 2

Find antilog of both sides

We have the final answer as

Hope this helps you

Answer:

hbchbjH j jas a aa  a s ds d as das

Explanation:

Answer:

Bisphenol A (BPA)

Explanation:

Bisphenol A (BPA) is a chemical additive commonly found in resins and plastics, such as water bottles or food containers. It can also be found in household electronics, medical devices, dental fillings and sales receipts, just to name a few other applications.

Answer:

6.93

Explanation:

Step 1: Given data

Step 2: Convert the temperature to the Kelvin scale

We will use the following expression.

K = °C + 273.15

K = 50°C + 273.15

K = 323 K

Step 3: Calculate K

We will use the following expression.

∆G° = -R × T × ln K

-5.20 × 10³ J = -(8.314 J/mol.K) × 323 K × ln K

K = 6.93

The advantage of a resource person would be that it will provide a hands-on activity that will allow the students to experience spacing between organs and on the body of the person.

It will also allow them to identify challenges when doing this and will engage them more in the activity and lesson.

Answer:A resource person add knowledge to the course

Explanation:

Answer:

That means that if you are calculating entropy change, you must multiply the enthalpy change value by 1000. So if, say, you have an enthalpy change of -92.2 kJ mol-1, the value you must put into the equation is -92200 J mol-1

The entropy change in the surroundings associated with this reaction occurring at 25 degree C is calculated as ΔS = -ΔH/T J/K.

Entropy is a quantity which gives idea about the randomness or arrangement of atoms or molecules present in any sample.

Entropy change will be calculated as:
ΔS = -ΔH/T, where

ΔH = chnage in enthalpy (J/mole)

T = temperature (K)

So to calculate the entropy change first we have to know about the value of enthalpy in joules and then divide it by the temperature.

Hence the unit of entropy is joule per kelvin.

To know more about entropy, visit the below link:
https://brainly.com/question/6364271

Answer:

CHC12

Explanation:

i am not really sure i am onna do a quick research 4 u tho

The given question is incomplete. The complete question is:

Compound X has a molar mass of 153.05 g/mol and the following composition:

element mass %

carbon 47.09%

hydrogen 6.59%

chlorine 46.33%

Write the molecular formula of X.

Answer: The molecular formula of X is [tex]C_6H_{10}Cl_2[/tex]

Explanation:

If percentage are given then we are taking total mass is 100 grams.

So, the mass of each element is equal to the percentage given.

Mass of C= 47.09 g

Mass of H = 6.59 g

Mass of Cl = 46.33 g

Step 1 : convert given masses into moles.

Moles of C =[tex]\frac{\text{ given mass of C}}{\text{ molar mass of C}}= \frac{47.09g}{12g/mole}=3.92moles[/tex]

Moles of H =[tex]\frac{\text{ given mass of H}}{\text{ molar mass of H}}= \frac{6.59g}{1g/mole}=6.59moles[/tex]

Moles of Cl =[tex]\frac{\text{ given mass of Cl}}{\text{ molar mass of Cl}}= \frac{46.33g}{35.5g/mole}=1.30moles[/tex]

Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.

For C = [tex]\frac{3.92}{1.30}=3[/tex]

For H = [tex]\frac{6.59}{1.30}=5[/tex]

For Cl =[tex]\frac{1.30}{1.30}=1[/tex]

The ratio of C : H: Cl= 3: 5 :1

Hence the empirical formula is [tex]C_3H_5Cl[/tex]

The empirical weight of [tex]C_3H_5Cl[/tex] = 3(12)+5(1)+1(35.5)= 76.5g.

The molecular weight = 153.05 g/mole

Now we have to calculate the molecular formula.

[tex]n=\frac{\text{Molecular weight }}{\text{Equivalent weight}}=\frac{153.05}{76.5}=2[/tex]

The molecular formula will be=[tex]2\times C_3H_5Cl=C_6H_{10}Cl_2[/tex]

Answer:

[tex]Cd(s)|Cd^{2+}(aq) || Cu^{2+}(aq)|Cu(s)[/tex]

Explanation:

A galvanic cell is composed of two electrodes immersed in a suitable electrolyte and connected via a salt bridge. One of the electrodes serves as a cathode where reduction or gain of electrons takes place. The other half cell functions as an anode where oxidation or loss of electrons occurs.

The representation is given by writing the anode on left hand side followed by its ion with its molar concentration. It is followed by a salt bridge. Then the cathodic ion with its molar concentration is written and then the cathode.

As it is given that cadmium acts as anode, it must be on the left hand side and copper must be on right hand side.

[tex]Cd(s)|Cd^{2+}(aq) || Cu^{2+}(aq)|Cu(s)[/tex]

Answer:

Oxidation half equation;

3Cd(s) -------> 3Cd^2+(aq) + 6e

Reduction half equation;

2In^3+(aq) + 6e -----> 2In(s)

Explanation:

Since the reduction potentials of Indium and Cadmium are -0.34 V and - 0.40 V respectively, we can see that cadmium will be oxidized while indium will the reduced.

We arrived at this conclusion by examining the reduction potential of both species. The specie with more negative reduction potential is oxidized in the process.

Oxidation half equation;

3Cd(s) -------> 3Cd^2+(aq) + 6e

Reduction half equation;

2In^3+(aq) + 6e -----> 2In(s)

Answer:

C) 237.96682 amu

Explanation:

The symbol for neptunium-236 is given as;

²³⁶₉₃Np

This element has 93 protons and (236 - 93 = 143) neutrons.

Mass Number =Total mass of Protons + Total mass of neutrons

Total Mass pf protons = 93 * 1.007825 amu, = 93.727725 amu

Total mass of Neutrons = 143 * 1.008665 amu = 144.239095 amu

Mass = 144.239095 + 93.727725  = 237.96682 amu

Correct option is option C.

Answer:

Each chlorine atom shares a pair of electrons with the sulfur atom. ... Each chlorine atom shares all its valence electrons with the sulfur atom