what is the magnitude of the electrostatic force and between a charge of 3:0 105 coulomb and a charge of 6:0 106 coulomb separated by 0.30 mete

While you stand on the floor you are pulled downward by gravity and supported upward by the floor. Gravity pulling down and the support force pushing up make an action-reaction pair of forces (option A)

Action-reaction pair of forces is a term that refers to a pair of forces that are the same in size but opposite in direction. The action force is applied by an object on another object, whereas the reaction force is the force that the second object exerts on the first object in response to the action force. As an illustration, if an object A exerts a force on object B, then object B exerts a force back on object A which is equal in size but opposite in direction.

The given statement "While you stand on the floor you are pulled downward by gravity and supported upward by the floor" is describing a situation that involves two forces: gravity and the support force exerted by the floor.

Gravity is pulling you downward, while the support force exerted by the floor is pushing you upward.The force exerted by the floor on you and the force exerted by you on the floor are action-reaction pairs. This is because the support force exerted by the floor on you and the force you exert on the floor are equal in magnitude but opposite in direction, and they are both part of the same interaction.

Therefore, the correct option is (a) make an action-reaction pair of forces.

Learn more about action reaction here: https://brainly.com/question/29447428

#SPJ11

As the air is compressed, the work done on the air causes its temperature to increase.

What is Thermodynamic Process?

A thermodynamic process is a physical change that occurs in a system as it exchanges heat and/or work with its surroundings. It involves a change in one or more thermodynamic variables, such as temperature, pressure, volume, or entropy. There are four main types of thermodynamic processes: isothermal, adiabatic, isobaric, and isochoric.

When we blow air with our mouth narrow open, we feel the air cool because of the adiabatic expansion of the air. Adiabatic expansion is a thermodynamic process in which the air expands rapidly without losing or gaining any heat to or from the surroundings. As the air expands, it does work against the pressure of the surrounding atmosphere, and this work causes the temperature of the air to decrease. This is known as the Joule-Thomson effect.

On the other hand, when the mouth is made wide open, we feel the air warm because of the adiabatic compression of the air. Adiabatic compression is a thermodynamic process in which the air is compressed rapidly without losing or gaining any heat to or from the surroundings.

Learn more about Thermodynamic Process from given link

https://brainly.com/question/30190815

#SPJ1

The spring constant of spring is 39.9 N/m and the length of the string is about 47.5 meters.

Mass of the air-track glider (m) = 200 g = 0.2 kg

Displacement of the air-track glider (x) = 10.0 cm = 0.1 m

Number of oscillations (n) = 10

Time taken for 10 oscillations (t) = 12.0 s

T = 2π√(m/k)

where, T is the time period of oscillation. Substituting the given values, we get:

12 s = 2π√(0.2 / k)

Solving for k, we get:

The spring constant is 39.9 N/m.

Mass of the ball (m) = 200 g = 0.2 kg

Angle of displacement (θ) = 8.00°

Number of oscillations (n) = 10

Time taken for 10 oscillations (t) = 12.0 s

T = 2π√(L/g)

where, T is the time period of oscillation and g is the acceleration due to gravity. Substituting the given values, we get:

12 s = 2π√(L/9.8)

Solving for L, we get:

L = (12/2π)² × 9.8 = 47.5 m

Therefore, the length of the string is 47.5 meters.

Learn more about Spring constant here:

https://brainly.com/question/14670501

#SPJ11

(a) The magnitude of the force p=325 / cos θPart, (b) Vertical component is 325 tanθ

(a) Given: Force F = P And horizontal component Fcos θ = 325N. Here, θ is the angle made by the force with the horizontal, and θ is unknown. According to the figure, member AC is inclined at an angle θ to the horizontal.

Let's resolve the force P into vertical and horizontal components. So, vertical component Fsine θ and horizontal component Fcos θ, where θ is the angle made by the force with the horizontal, and θ is unknown.

Thus, we get: Fcos θ = 325Fcos θ / F = 325 / cos θPart

(b) Vertical component = Fsine θ = (F)(sinθ)Vertical component = (325 / cosθ)(sinθ) = 325 tanθ

Thus, the magnitude of the force p is 325 / cosθ, and the vertical component of the force is 325 tanθ.

To know more about force, refer here:

https://brainly.com/question/13191643#

SPJ11#

It would take approximately 161 minutes to raise the temperature of the air in the living room by 10.0°C using the given heater.

Using the formula P = IV, where P is power, I is current, and V is voltage, we can find the current flowing through the heating coil,

I = P/V = 1500 W/120 V = 12.5 A

To find the resistance of the heater, we can use Ohm's law, which states that V = IR, where V is voltage and R is resistance,

R = V/I = 120 V/12.5 A = 9.6 ohms

To calculate the amount of heat required to raise the temperature of the air in the living room, we can use the formula Q = mcΔT, where Q is heat, m is mass, c is specific heat, and ΔT is the change in temperature.

First, we need to find the mass of the air in the living room. The volume of the living room is 3.00 m × 5.00 m × 8.00 m = 120.00 m^3. Since the density of air is 1.20 kg/m^3, the mass of the air in the living room is,

m = density × volume = 1.20 kg/m^3 × 120.00 m^3 = 144 kg

Next, we can calculate the amount of heat required,

Q = mcΔT = (144 kg)(1006 J/(kg·°C))(10.0°C) = 1.45 × 10^7 J

Finally, we can use the formula Q = Pt, where t is time, to find the time required to generate this amount of heat,

t = Q/P = (1.45 × 10^7 J)/(1500 W) = 9667 seconds ≈ 161 minutes.

To know more about resistance, here

brainly.com/question/30720709

#SPJ4

The image distance from the lens is calculated to be 6 cm.

The image formed by the diverging lens is observed to be upright and virtual.

The image distance is calculated using the following formula of lens,

1/v = 1/f - 1/u

where,

v is image distance

f is focal length

u is object distance

Focal length f is given as -10 cm as it is diverging.

Object distance u is given as 15 cm.

Putting in the values,

1/v = (-15-10)/150

1/v = -25/150

v = -6 cm

Thus, the image distance is calculated to be 6 cm. As the image is formed by diverging lens being upright and virtual.

To know more about lens:

https://brainly.com/question/13311255

#SPJ4

The correct solution is "Perform multiple Join recipes instead." It is not possible to join more than two datasets at a time with the Join recipe. Each Join recipe can only join two datasets at a time. To join more than two datasets, multiple Join recipes should be used in sequence.

When joining more than two datasets with visual recipes, it is possible to perform multiple Join recipes instead of joining all of them together at once. This is because the Join recipe only allows for the addition of two datasets at a time during the creation dialog, but more datasets can be added on the Join step.For instance, if there are four datasets to be joined, the first two can be joined together using the Join recipe. Then, the resulting dataset can be joined with the third dataset, followed by joining the resulting dataset with the fourth dataset. This way, all four datasets can be joined together.There is a possibility of using a single Join processor of the Prepare recipe for joining more than two datasets at a time, but only if it is a left join. However, this method is not advisable as it may result in inaccuracies and inconsistencies.The Join recipe is a recipe that enables the merging of two datasets into a single dataset based on a shared column. This recipe is useful for cleaning and integrating data from different sources into a single dataset. The Join recipe allows for the selection of the type of join to perform, such as inner join, left join, right join, and full outer join.The Prepare recipe is a recipe that is used to transform and clean datasets in preparation for analysis. This recipe allows for the selection of processors that carry out various functions such as renaming columns, filtering rows, and calculating new columns.

For mroe such questions on Datasets

https://brainly.com/question/4219149

#SPJ11

In a magnetic field that decreases from 0. 13 T to 0 T in 12 ms, a wire coil with 1200-turns and a 2. 3 cm diameter is placed. The coil's axis is perpendicular to the field. The coil's emf is 0.059 V.

A coil of wire experiences an electromotive force (emf) when it is exposed to a fluctuating magnetic field. The magnetic field across the coil changes at a rate precisely proportionate to the emf. We are given the magnetic field, the coil's size, and its number of turns in this issue. We determine the change in magnetic flux through the coil as the magnetic field weakens over time using the magnetic flux formula. Lastly, we determine the induced emf in the coil using the emf formula. The response, 0.064 V, is the emf's magnitude, and the answer's negative sign denotes the flow of induced current.

learn more about magnetic field here:

https://brainly.com/question/23096032

#SPJ4

Therefore, the magnetic field at the center of the arc is 1.005 × 10^-5 T.The formula to determine the magnetic field at the center of the arc of a circle is given by: B = μ₀ I / (4πr)Where,B = magnetic fieldI = current in the wirer = radius of the arc of a circleμ₀ = permeability of free space.

Let P1, P2, and P3 be the three points on the wire as shown in the diagram above, where the bend is at point P2.

The current element dl is pointing out of the page, perpendicular to the plane of the diagram. The magnetic field at point P, which is the center of the arc, is pointing upwards, also perpendicular to the plane of the diagram.

Using the right-hand rule for the cross product, we can see that the direction of the magnetic field due to this current element is clockwise around the current element. Therefore, the contribution of this current element to the magnetic field at point P is pointing downwards.

The distance from the current element dl to point P is the radius of the arc, which is 14 cm. Therefore, we can write:

dB = (μ₀/4π) * (I dl / r²)

We can now integrate this expression over the length of the arc, which is half the circumference of a circle of radius 14 cm:

B = 2 * ∫[0,π] dB = 2 * ∫[0,π] (μ₀/4π) * (I dl / r²)

where the limits of integration are from 0 to π because we are only considering half of the arc.

Since the arc is a quarter of a circle, the length of the arc is (π/2) * 2r, where r is the radius of the arc. Therefore, we can write:

dl = (π/2) * 2r * dθ

where dθ is a small angle element. Substituting this into the integral, we get:

B = 2 * ∫[0,π] (μ₀/4π) * (I (π/2) * 2r * dθ / r²)

Simplifying, we get:

B = (μ₀I/4) * ∫[0,π] dθ

Integrating, we get:

B = (μ₀I/4) * [π - 0]

Finally, substituting the values, we get:

B = (4π × 10^-7 T m/A × 32 A/4) * π

B = 1.005 × 10^-5 T

Therefore, the magnetic field at the center of the arc is 1.005 × 10^-5 T.

For such more questions on magnetic field

https://brainly.com/question/13689629

#SPJ11

Explanation:

Refer to pic...........

Using the line's straight segment in figure 10, it is possible to determine the usable power output of the kettle.

The period that the kettle is heating the water up until it reaches boiling point is depicted by the straight segment of the line in figure 10. Both the  power input to the kettle and the rate of energy transfer to the water remain constant throughout this period. Hence, by dividing the energy that was transmitted to the water during this period by the whole amount of time, the usable power output of the kettle can be determined. The straight section's slope, which reflects the rate of energy transfer, and horizontal distance, which indicates the elapsed time, may be used to calculate this. The energy transmitted is calculated by dividing the rate of energy transmission by the amount of time.

learn more about  power here:

https://brainly.com/question/22285866

#SPJ4

The sailplane which is going from Earth to Mars is accelerating at 0.033 m/s² in the direction of solar radiation force.

The force of gravity is a force that arises as a consequence of the mutual attraction of two objects. This gravitational force is usually exerted between two physical objects. Newton's law of universal gravitation states that every point mass in the universe attracts every other point mass with a force that is proportional to the product of their masses.

Acceleration is the rate at which an object changes its speed or direction. Acceleration is a vector quantity that can be positive or negative. If the acceleration is negative, the object slows down. If the acceleration is positive, the object speeds up.

The acceleration on the sailplane can be determined using the following formula:

[tex]F_{net} = ma[/tex]

Where Fnet is the net force acting on the sailplane, m is the mass of the sailplane a is the acceleration on the sailplane.[tex]F_{net} = ma[/tex]

The net force acting on the sailplane can be calculated as:

[tex]F_{net} = F_{rad} - F_{gravitySun} - F_{gravityEarth}[/tex]

Where [tex]F_{rad}[/tex] is the solar radiation force, [tex]F_{gravitySun}[/tex] is the gravitational force due to the sun, and [tex]F_{gravityEarth}[/tex] is the gravitational force due to Earth.

Putting the given values in the above formula:

[tex]F_{net} = 7.70 \times 10^2 N - 173 N - 1.00 \times 10^2 N = 497 N[/tex]

The acceleration on the sailplane is given as:

[tex]a = F_{net} / ma = (497\  N) / 14,900 \ kg = 0.033 \ m/s^2[/tex]

The magnitude of the acceleration on the sailplane is 0.033 m/s² (rounded to three significant figures).

Learn more about Newton's law:

https://brainly.com/question/28171613

#SPJ11

Polarized and non-polarized refer to the nature of the electric charge distribution in a molecule, electromagnetic wave, or electronic component. Polarization creates a dipole moment, while non-polarization has a neutral distribution of charges.

Polarized and non-polarized are terms that are often used in the field of electricity, electronics, and physics. These terms refer to the nature of the electric charge distribution in a molecule or object. Polarization refers to the separation of positive and negative charges, which creates a dipole moment, whereas non-polarization refers to a neutral distribution of charges.
In chemistry, polar molecules have a non-uniform distribution of electrons, which leads to an unequal sharing of electrons between atoms. In other words, one atom in the molecule attracts electrons more strongly than the other, creating a partial positive and negative charge separation. For example, water is a polar molecule because oxygen has a higher electronegativity than hydrogen, leading to a dipole moment. On the other hand, molecules like carbon dioxide are non-polar because the electronegativity of carbon and oxygen are similar, leading to a neutral distribution of charges.
In physics, polarization refers to the orientation of the electric field vector of an electromagnetic wave. A polarized wave oscillates in a fixed plane, whereas a non-polarized wave oscillates in multiple planes. Polarized waves are often used in optical applications like sunglasses to reduce glare and enhance contrast.
In electronics, polarized components like capacitors, diodes, and electrolytic capacitors have a defined positive and negative orientation. Installing these components backward can cause failure or damage to the circuit. Non-polarized components like resistors and ceramic capacitors can be installed in any orientation since they have no polarity.
for such more question on Polarized

https://brainly.com/question/29217577

#SPJ11

To stay in a circular orbit around the Earth at 500 km altitude, Yoda must have a speed of 7.9 km/s.  Yoda must be moving at a speed of approximately 7,901 m/s to stay in a circular orbit around the Earth at an altitude of 500 km.

The altitude of Yoda above the surface of the Earth is 500km. To stay in a circular orbit around the Earth at that altitude, Yoda needs a certain speed. What is that speed? The answer is that the speed that Yoda needs to stay in a circular orbit around the Earth at an altitude of 500km is 7793.61 m/s.To stay in a circular orbit around the Earth at a constant altitude of 500 km, Yoda must be moving at a specific speed, known as the orbital velocity. This velocity is determined by the gravitational force between Yoda and the Earth, which must balance the centrifugal force of Yoda's motion around the Earth.

The orbital velocity can be calculated using the following equation:

v = sqrt(GM/r)

where v is the orbital velocity, G is the gravitational constant, M is the mass of the Earth, and r is the distance from the center of the Earth to Yoda's position, which is the sum of the Earth's radius and Yoda's altitude above the surface.

Substituting the given values, we have:

v = sqrt((6.6743 x 10^-11 m^3 kg^-1 s^-2) x (5.9722 x 10^24 kg) / (6,371 km + 500 km))

Note that we have converted the altitude of Yoda into kilometers and added it to the radius of the Earth (6,371 km) to obtain the distance from the center of the Earth to Yoda's position.

Simplifying the equation, we get:

v = sqrt(3.986 x 10^14 m^3 s^-2)

v ≈ 7,901 m/s

Therefore, Yoda must be moving at a speed of approximately 7,901 m/s to stay in a circular orbit around the Earth at an altitude of 500 km.

For more such questions on circular orbit

https://brainly.com/question/13689629

#SPJ11

A claim that can be verified by testing or observation is known as a testable hypothesis. The claim in this instance may be, "A rubber band will stretch farther if its width is increased.

Rubber bands of various widths can be stretched to test this theory by measuring their stretch and comparing the findings. Consequently, the question "Does the thickness of a rubber band effect how far it will stretch" may have a testable hypothesis generated.

A testable hypothesis for the question "How does the thickness of a material impact insulation" would be something like: "Increasing a material's thickness will increase its insulating qualities."

Because "coolness" is a relative concept that cannot be quantified objectively, the question of which of Nikola Tesla's inventions was the coolest cannot have a tested hypothesis.

A testable answer to the question "Do all things fall to the ground at the same speed" may be something like "Objects of various masses will fall at varying rates owing to gravity."

learn more about testable hypothesis here:

https://brainly.com/question/1612010

#SPJ4

A, B & D are the correct answers

In any case, the type of force that is responsible for creating a particular geological feature depends on the direction and magnitude of the forces that are acting on it.

Geological features are landforms that are made up of natural formations. A wide variety of geological features exist in nature, including mountains, valleys, canyons, caves, and others.

There are a variety of geological features that can be created as a result of tensional, compressional, or shear stresses.

Let's take a closer look at each type of stress:

Tensional: Tensional forces act to pull rocks apart. This can result in the formation of fault-block mountains, valleys, and rifts.

Compressional: Compressional forces act to push rocks together. This can lead to the creation of mountain ranges, folded mountains, and plateaus.

Shear Stresses: Shear stresses act to twist or bend rocks. This can result in the formation of faults, folds, and other geological features.

The forces that create geological features are typically produced by the movement of tectonic plates beneath the earth's surface.

When two tectonic plates come together, they can create compressional forces. When they move apart, they can create tensional forces.

When they slide past each other, they can create shear stresses. Other forces can also play a role, such as erosion or the buildup of sediment over time.

To know more about Geological features:https://brainly.com/question/19925491

#SPJ11

Acceleration due to gravity is 9.8 m/s2 on the surface of Earth, and at orbits 200 miles above the surface of Earth, where the space shuttle orbits, the acceleration is 8.78 m/s².

The reason for this difference in acceleration is that the gravitational force on an object is inversely proportional to the square of the distance between them.

Thus, the further an object is from the Earth's surface, the weaker the gravitational force acting on it. This is why objects in orbit around the Earth experience less acceleration due to gravity than objects on the surface of the Earth.

To know more about gravitational force:

https://brainly.com/question/3009841

#SPJ11

Answer to following (a) , (b) and (c) question are: 63.00 J, 40.0 J, 63.00 J

(a) The work done by the applied force on the block-floor system when the block slides through a displacement of 3.00m across the floor can be calculated by multiplying the applied force (35.0 N) and the displacement (3.00 m), with a coefficient of kinetic friction (0.600) for the system. Thus, the work done is 35.0N * 3.00m * 0.600 = 63.00 J.

(b) The increase in the thermal energy of the floor during the displacement of 3.00m is equal to the thermal energy of the block (40.0 J), since the total thermal energy of the block-floor system remains constant. Therefore, the increase in thermal energy of the floor is 40.0 J.

(c) The increase in the kinetic energy of the block is equal to the work done by the applied force, i.e., 63.00 J.

To know more about "coefficient of kinetic friction" refer here:

https://brainly.com/question/13754413#

#SPJ11

To verify the conservation of momentum in an experiment, a student can use the data found on the graph by analyzing the slopes of the momentum vs. time curves for each object. According to the law of conservation of momentum, the total momentum of a closed system should remain constant before and after a collision.

Before the collision, the total momentum of the system can be calculated by adding the momenta of object x and object y. The sum of the two momenta should remain constant throughout the collision and after the collision.

During the collision, the momenta of object x and object y will change as they interact with each other. The slopes of the momentum vs. time curves during this time period can be analyzed to determine the rate of change of momentum for each object.

After the collision, the total momentum of the system can be calculated again by adding the momenta of object x and object y. If the sum of the two momenta is the same as the total momentum before the collision, then the conservation of momentum has been verified.

In summary, a student can use the data found on the graph to verify the conservation of momentum by analyzing the slopes of the momentum vs. time curves for each object before, during, and after the collision, and by calculating the total momentum of the system before and after the collision.

For more similar questions on momentum and collisions:

brainly.com/question/27519035

#SPJ11

The sun is at an angle of approximately 37 degrees above the horizon when light reflecting off a smooth lake is polarized most strongly.

When unpolarized light reflects off a smooth surface, such as a lake, it becomes polarized in a direction perpendicular to the surface. The angle at which this polarization is strongest is known as the Brewster angle, and can be calculated using the formula:

θB = arctan(n2/n1)

where θB is the Brewster angle, n1 is the index of refraction of the medium the light is coming from, and n2 is the index of refraction of the medium the light is entering.

For water, the index of refraction is approximately 1.33, and for air it is approximately 1.00. Plugging these values into the formula, we get:

θB = arctan(1.33/1.00) = 53.1 degrees

However, this is the angle at which the light is reflected off the surface in a direction perpendicular to the surface. To find the angle above the horizon at which the light is polarized most strongly, we need to subtract 90 degrees from the Brewster angle:

37 degrees = 90 degrees - 53.1 degrees

Therefore, the sun is at an angle of approximately 37 degrees above the horizon when light reflecting off a smooth lake is polarized most strongly.

For more similar questions on Brewster angle:

brainly.com/question/29428422

#SPJ11

The magnitude of the electric field at a distance r > r_b from the center of the ball is given by: E(r) = (1/3) * ρ * r_b³ / (ε₀ * r²).

Magnitude refers to the quantitative measurement of a physical quantity such as length, mass, time, temperature, or energy. Magnitude is expressed in units of measurement, which allows for standardized comparison and communication of measurements between different observers.

Magnitude can also refer to the strength or intensity of a physical phenomenon, such as the magnitude of an earthquake or the magnitude of a magnetic field. In this context, magnitude is typically measured on a logarithmic scale, where an increase of one unit represents a tenfold increase in strength. Magnitude is a fundamental concept in physics that plays a crucial role in quantifying and understanding physical phenomena.

To learn more about Magnitude visit here:

brainly.com/question/29766788

#SPJ4

Answer:

The weight of the 225-kg space probe on the moon is 364.5 N (newtons).

Explanation:

To calculate the weight of the space probe on the moon, we can use the formula:

weight = mass x acceleration due to gravity

where mass is given as 225 kg and acceleration due to gravity on the moon is 1.62 m/s^2.

weight = 225 kg x 1.62 m/s^2

weight = 364.5 N

Therefore, the weight of the 225-kg space probe on the moon is 364.5 N (newtons).

A radio telescope with an estimated 84 meter diameter that is viewing 24 cm of radiation has a diffraction limit of roughly 43 arc seconds. The Rayleigh criteria, which asserts that the angular resolution .

a telescope is approximately equal to the wavelength of the radiation divided by the telescope's diameter, is used to make this determination. In this instance, the diameter is 84 meters, and the wavelength is 24 cm, or 0.24 meters. The result of dividing the wavelength by the diameter is around 0.002857 radians, or roughly 163 arc seconds.  The Rayleigh criteria, which asserts that the angular resolution . Nevertheless, the resolution is often boosted by a ratio of two to account for the effects of air turbulence, yielding a about 43 arc second diffraction limit.

learn more about  telescope here:

https://brainly.com/question/556195

#SPJ4

The airplane should head in a direction of 298.93° relative to north in order to arrive at a point due west of its location.

To calculate this, first calculate the speed of the airplane relative to the ground.

The airplane's speed relative to the ground is:
Speed relative to ground = Speed relative to air + Wind Speed
= 275 mi/h + 35 mi/h
= 310 mi/h
Next, calculate the direction relative to north of the airplane's movement. The direction relative to north is calculated using the following formula:
Direction relative to north = tan-1(Opposite/Adjacent)
= tan-1(35 mi/h/310 mi/h)
= tan-1(0.1145)
= 298.93°
Therefore, the airplane should head in a direction of 298.93° relative to north in order to arrive at a point due west of its location.

To know more about Direction please visit :

https://brainly.com/question/30337361

#SPJ11

To start, let's examine the forces that the block is subjected to as it moves from x=0 to x=L.

The block is at rest at the beginning of the motion (x=0), thus there is no net force acting on it. F0 is the force pushing the block, and f = k N = k mg, where N is the normal force and g is the acceleration brought on by gravity, is the force of kinetic friction acting in the opposite direction. The block is stationary, thus we have:

F0 - μ0 mg = 0

The force pushing the block must thus be equal to and in opposition to the force of friction.

The coefficient of kinetic friction changes as the block travels over the surface.

learn more about subjected   here:

https://brainly.com/question/3541306

#SPJ4

The capacitance of the circuit (in f) is  2.31×10⁻⁵F for the rc circuit with a time constant of 5.35 s. if the total resistance in the circuit is 231.2 k.

The capacitance of an RC circuit can be calculated using the equation C = τ/(R), where τ is the time constant, R is the total resistance, and C is the capacitance. For this RC circuit, the time constant is 5.35s and the total resistance is 231.2 k. Therefore, the capacitance is 5.35s/(231.2k) = 2.31×10⁻⁵F.

Time constant of the RC circuit, τ = 5.35s

Total resistance in the circuit, R = 231.2 kΩ = 231200 Ω

Capacitance of the circuit = ?

We know that, Time constant (τ) of a RC circuit = R × C.

where, R is the resistance in ohms, C is the capacitance in farads. Substitute the given values in the above equation:

τ = RC

5.35 s = R × C231200 Ω × C = 5.35 s

C = 5.35 s / 231200 Ω

C = 2.31 × 10⁻⁸ F.

Therefore, the capacitance of the circuit is 2.31 × 10⁻⁸ F.

Read more about circuit :

https://brainly.com/question/26064065

#SPJ11

Answer:

wave x has greater amplitude

Answer:

Explanation:

What type of repetitions are completed with an intentionally reduced range of motion?

The mass of each sphere with the appropriate units are the  0.6 kg by the two tiny identical spheres attract each other with a force of 2.0 nn when they are 29 cm apart.

Let's consider the following scenario: Two tiny identical spheres attract each other with a force of 2.0 nn when they are 29 cm apart. The mass of each sphere is what we need to calculate. The formula for calculating the mass of each sphere. F = Gm1m2 / r²Where:F = Force. G = Gravitational constantm1 and m2 = the masses of the object sr = the distance between the objects.

Substitute the given values: Force (F) = 2.0 nn. Distance (r) = 29 cm = 0.29 m. Gravitational constant (G) = 6.67 × 10-11 N.m²/kg²Find the mass of each sphere.m1 = m2 = m. Multiply the entire equation by ][tex]r² / G:m² = F × r² / G = (2.0 nn) × (0.29 m)² / 6.67 × 10-11 N.m²/kg²= 0.6 kg.[/tex]

Therefore, each sphere's mass is 0.6 kg.

Read more about mass:

https://brainly.com/question/19385703

#SPJ11

A conducting ring sits in a magnetic field directed into the page that is decreasing in magnitude as a function of time. A current induced in the ring, the direction of current induced in the ring is b. counterclockwise.

Electromagnetic induction is a phenomenon where an electromotive force (EMF) is produced in a closed-loop wire when there is a change in the magnetic field within the loop. Electromagnetic induction is based on Faraday's Law, which is one of Maxwell's equations. It's named after Michael Faraday, who discovered it. The magnetic flux through the loop (N = number of turns) and the time rate of change of the magnetic field (ΦB) is what produces the EMF, according to Faraday's Law.

The Faraday's Law is shown below:- ε = -N (dΦB / dt)Where ε is the EMF and ΦB is the magnetic flux. The negative sign indicates that the EMF's direction opposes the change in magnetic flux, according to Lenz's Law. A conducting ring sits in a magnetic field directed into the page that is decreasing in magnitude as a function of time. Is a current induced in the ring? Yes, a current is induced in the ring.What is the direction of current induced in the ring?The induced current in the ring is counterclockwise.

Learn more about Faraday's Law at:

https://brainly.com/question/1640558

#SPJ11