What is the hardest things in the world​

Answer:

Generation in computer terminology is a change in technology a computer is/was being used. Initially, the generation term was used to distinguish between varying hardware technologies. Nowadays, generation includes both hardware and software, which together make up an entire computer system.

5 generation of computer  

Main electronic component: based on artificial intelligence, uses the Ultra Large-Scale Integration (ULSI) technology and parallel processing method.

ULSI – millions of transistors on a single microchip

Parallel processing method – use two or more microprocessors to run tasks simultaneously.

Language – understand natural language (human language).

Power – consume less power and generate less heat.

Speed – remarkable improvement of speed, accuracy and reliability (in comparison with the fourth generation computers).

Size – portable and small in size, and have a huge storage capacity.

Input / output device – keyboard, monitor, mouse, trackpad (or touchpad), touchscreen, pen, speech input (recognise voice / speech), light scanner, printer, etc.

Example – desktops, laptops, tablets, smartphones, etc.

3 generation of computer

Main electronic component – integrated circuits (ICs)

Memory – large magnetic core, magnetic tape / disk

Programming language – high level language (FORTRAN, BASIC, Pascal, COBOL, C, etc.)

Size – smaller, cheaper, and more efficient than second generation computers (they were called minicomputers).

Speed – improvement of speed and reliability (in comparison with the second generation computers).

Input / output devices – magnetic tape, keyboard, monitor, printer, etc.

Examples – IBM 360, IBM 370, PDP-11, UNIVAC 1108, etc.

4 generations of computer

Main electronic component – very large-scale integration (VLSI) and microprocessor.

VLSI– thousands of transistors on a single microchip.

Memory – semiconductor memory (such as RAM, ROM, etc.)

RAM (random-access memory) – a type of data storage (memory element) used in computers that temporary stores of programs and data (volatile: its contents are lost when the computer is turned off).

ROM (read-only memory) – a type of data storage used in computers that permanently stores data and programs (non-volatile: its contents are retained even when the computer is turned off).

Programming language – high level language (Python, C#, Java, JavaScript, Rust, Kotlin, etc.).

Answer:

Transition temperature is the temperature at which a substance changes from one state to another.

Allotropy is the existence of an element in many forms.

Answer:

Element

Element : A pure substance composed of the same type of atom throughout. Compound : A substance made of two or more elements that are chemically combined in fixed amounts.

Explanation:

Answer:

Answer is B) 20.0 moles

Explanation:

From the equation,

1 mole of Fe2O3 = 2 moles of Al

therefore 10.0 moles of Fe2O3 = 10×2

= 20.0 moles.

Answer:

As a giant star.

Explanation:

A

Answer:

C2H2 + Br2 → C2H2Br2

Explanation:

Answer:

79 g/mol

Explanation:

Mass of unknown metal deposited = 3.137 g - 1.4 g = 1.737 g

Number of moles of metal deposited = 0.022 moles

Since;

Number of moles = reacting mass/molar mass

Molar mass = reacting mass/number of moles

Molar mass = 1.737 g/0.022 moles

Molar mass= 79 g/mol

Answer:

a. True.

Explanation:

Only primary and secondary alcohols can oxidise to give an aldehyde. But a weak oxidizing agent must be used to prevent formation of a carboxylic acid or ketone.

weak oxidizing agents: Chromyl chloride, silver/oxygen/500°C

take an example of ethanol:

[tex]{ \bf{CH _{3} CH_{2}OH \: \: \frac{Ag/O_{2} }{500 \degree C} > \: \:CH _{3} CHO}}[/tex]

[tex]{ \sf{CH _{3} CHO \: \: is \: ethanal}} [/tex]

By ozonolysis:

Here, reactants are Ozone gas, Carbon tetrachloride at a temperature (<20°C), ethanoic acid, zinc and water.

take an example of propanol:

if it undergoes ozonolysis, it gives ethanal and methanal.

Answer:

A. True

Explanation:

Only primary and secondary alcohols can oxidise to give an aldehyde. But a weak oxidizing agent must be used to prevent formation of a carboxylic acid or ketone.

weak oxidizing agents: Chromyl chloride, silver/oxygen/500°C

take an example of ethanol:

By ozonolysis:

Here, reactants are Ozone gas, Carbon tetrachloride at a temperature (<20°C), ethanoic acid, zinc and water.

take an example of propanol:

if it undergoes ozonolysis, it gives ethanal and methanal.

Answer:

Stoichiometry refers to the relationship between the moles of reactants and products.

This question must be solved using both stoichiometry and the gas laws

The reaction equation is;

2 Al(s) + 6 HCl(aq) --------> 2 AICI3, (aq) + 3 H2(g)

Number of moles of Al = 3g/27g/mol = 0.11 moles

According to the reaction equation;

2 moles of Al yields 3 moles of H2

0.11 moles of Al yields 0.11 * 3/2 = 0.165 moles

From the ideal gas equation;

PV=nRT

P = ?

n= 0.165 moles

V = 0.85 L

T = 297 K

R = 0.082 atmLK-1mol-1

P= nRT/V

P = 0.165 * 0.082 * 297/0.85

P= 4.73 atm

P1 = 4.73 atm

T1 = 297 K

V1 = 0.85 L

P2 = 1 atm

T2 =273 K

V2 =?

P1V1/T1 = P2V2/T2

P1V1T2 = P2V2T1

V2 = P1V1T2/P2T1

V2 =  4.73 * 0.85 * 273/1 * 297

V2 = 3.69 L

P1 = 760 mmHg

T1 = 273 K

V1 = 3.69

P2 = 438 mm Hg

T2 = 284.2 K

V2 =?

P1V1/T1 = P2V2/T2

P1V1T2 = P2V2T1

V2 = P1V1T2/P2T1

V2 = 760 * 3.69 * 284.2/438 *273

V2 = 797010.48/119574

V2= 6.67 L

https://brainly.com/question/1190311

Answer:

[tex]n_1=4[/tex]

Explanation:

From the question we are told that:

Wavelength [tex]\lambda=489.2 nm =>4.86*10^{-7}[/tex]

nf level= Balmer series

nf level= 2

Generally the equation for Wavelength is mathematically given by

[tex]\frac{1}{\lambda}=R[\frac{1}{nf^2}-\frac{1}{n_1^2}][/tex]

Where

[tex]R=Rydberg Constant[/tex]

[tex]R=1.097*10^7[/tex]

Therefore

[tex]\frac{1}{4.86*10^{-7}}=1.097*10^7[\frac{1}{2^2}-\frac{1}{n_1^2}][/tex]

[tex]n_1=4.0021[/tex]

[tex]n_1=4[/tex]

Answer:

Sorry but I know only what ksf stand for

Explanation:

Ksf stand for solubility product constant

Answer:

ksp stands for solubility product constant .

kf stands for molal freezing point depression constant ..

Explanation:

KSP = The solubility product constant, Ksp​, is the equilibrium constant for a solid substance dissolving in an aqueous solution. It represents the level at which a solute dissolves in solution. The more soluble a substance is, the higher the Ksp value it has .

KF = Kf is a constant for a given solvent. Kf is called the molal freezing point depression constant and represents how many degrees the freezing point of the solvent will change when 1.00 mole of a nonvolatile nonionizing (nondissociating) solute dissolves in one kilogram of solvent.

Answer:

As hydrogen is more electronegative than boron, in BH3 the oxidation number of hydrogen should be taken as -1. (E. N. of B = 2.0 & E. N. of H = 2.1)

Suppose, oxidation number of B is x.

So, we can write, x + 3*(-1) = 0

=> x = +3

Therefore, oxidation num

Explanation:

As hydrogen is more electronegative than boron, in BH3 the oxidation number of hydrogen should be taken as -1. (E. N. of B = 2.0 & E. N. of H = 2.1)

Suppose, oxidation number of B is x.

So, we can write, x + 3*(-1) = 0

=> x = +3

Therefore, oxidation num

Answer:

Part A

HCOOH(aq) + NaOH(aq) → HCOONa(aq) + H2O(l)

Part B

ClCH2CH2CO2H(aq) + NaOH(aq) ------> ClCH2CH2CO2Na(aq) + H2O(l)

Explanation:

The reaction between an alkanoic acid and a base is a neutralization reaction. The reaction occurs as follows;

RCOOH + NaOH ----> RCOONa + H2O

We have to note the fact that the net ionic reaction still remains;

H^+(aq) + OH^-(aq) ---> H2O(l)

In both cases, the reaction can occur and they actually do occur as written.

Answer:

C. yes, because it is universally applies to all objects

Answer:

0.0347 moles of hydronium ions

Explanation:

The equation of the neutralization reaction between hydroxide and hydronium ions is given below:

H₃O+ (aq) + OH- (aq) ----> 2 H₂O (l)

From the equation above, 1 mole of hydroxide ions will neutralize one mole hydronium ions.

The moles of hydroxide ions present in 1 teaspoon or 5 mL of antacid product is calculated as follows:

Number of moles = mass / molar mass

Molar mass of Magnesium hydroxide, Mg(OH)₂ = 58 g/mol

Molar mass of aluminium hydroxide, Al(OH)₃ = 78 g/mol

Mass of magnesium hydroxide = 450 g = 0.45 g

Mass of aluminium hydroxide = 500 mg = 0.5 g

Moles of magnesium hydroxide = (0.45/58) moles

Moles of aluminium hydroxide = (0.5/78) moles

Equation of the ionization of magnesium hydroxide and aluminium hydroxide is given below:

Mg(OH)₂ (aq) ----> Mg²+ (aq) + 2 OH- (aq)

Al(OH)₃ (aq) ---> Al³+ (aq) + 3 OH- (aq)

Number of moles of hydroxide ions present in (0.45/58) moles of magnesium hydroxide = 2 × (0.45/58) moles = 0.0155 moles

Number of moles of hydroxide ions present in (0.5/78) moles of aluminium hydroxide = 3 × (0.5/78) moles = 0.0192 moles

Total moles of hydroxide ions = 0.0155 + 0.0192 = 0.0347 moles hydroxide ions

Therefore, 0.0347 moles of hydroxide ions will neutralize 0.0347 moles of hydronium ions.

Answer:

[tex]\boxed {\boxed {\sf 5.56 \times 10^{23} \ molecules \ CH_4}}[/tex]

Explanation:

We are asked to find how many molecules of methane are in 14.8 grams of the substance.

First, we convert grams to moles. We use the molar mass, or the mass of 1 mole of a substance. These values are equivalent to the atomic masses found on the Periodic Table, however the units are grams per mole instead of atomic mass units.

We are given the compound methane, or CH₄. Look up the molar mass of the individual elements (carbon and hydrogen).

Check the formula for subscripts. Hydrogen (H) has a subscript of 4, so there are 4 moles of hydrogen in 1 mole of methane. We must multiply hydrogen's molar mass by 4, then add carbon's molar mass.

Now we use dimensional analysis to convert. To do this, we set up a ratio using the molar mass.

[tex]\frac {16.043 \ g \ CH_4 }{ 1 \ mol \ CH_4}[/tex]

Since we are converting 14.8 grams of methane to moles, we multiply by this value.

[tex]14.8 \ g \ CH_4 *\frac {16.043 \ g \ CH_4 }{ 1 \ mol \ CH_4}[/tex]

Flip the ratio so the units of grams of methane cancel.

[tex]14.8 \ g \ CH_4 *\frac{ 1 \ mol \ CH_4} {16.043 \ g \ CH_4 }[/tex]

[tex]14.8 *\frac{ 1 \ mol \ CH_4} {16.043}[/tex]

[tex]\frac {14.8}{16.043} \ mol \ CH_4= 0.9225207256 \ mol \ CH_4[/tex]

Next, we convert moles to molecules. We use Avogadro's Number or 6.022  × 10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance. In this problem, the particles are moles of methane. Set up another ratio using Avogadro's Number.

[tex]\frac { 6.022 \times \ 10^{23} \ molecules \ CH_4}{ 1 \ mol \ CH_4}[/tex]

Multiply by the number of moles we calculated.

[tex]0.9225207256\ mol \ CH_4 * \frac { 6.022 \times \ 10^{23} \ molecules \ CH_4}{ 1 \ mol \ CH_4}[/tex]

The units of moles of methane cancel.

[tex]0.9225207256* \frac { 6.022 \times \ 10^{23} \ molecules \ CH_4}{ 1 }[/tex]

[tex]5.55541981 \times 10^{23} \ molecules \ CH_4[/tex]

The original measurement of grams (14.8) has 3 significant figures, so our answer must have the same. For the number we calculated, that is the hundredth place. The 5 in the thousandth place tells us to round the 5 in the hundredth place up to a 6.

[tex]5.56 \times 10^{23} \ molecules \ CH_4[/tex]

14.8 grams of methane is equal to approximately 5.56 × 10²³ molecules of methane.

Answer:

gggggggggg

Explanation:

gggggggg

The tripeptide formed from threonine, glycine and alanine is neutral at the pH of 7.3. The carboxylic end is negative charged by donating its proton to form the NH₃⁺ group.

Peptides are protein units formed from two or more amino acids bonded through peptide bonds. There are essential and non-essential amino acids. Essential amino acids have to be uptake from food and non-essential amino acids are synthesized inside the body.

Threonine is an essential amino acid with a CH₃CHOH side group. Glycine has the simplest side group hydrogen and alanine has  CH₃ side chain. Both glycine and alanine are non-essential amino acids.

Each amino acids are represented with a three letter code or one letter symbol. Thus threonine is T,  G for glycine and A for alanine. At a pH of 7.3 the peptide formed from these amino-acids contains a negatively charged carboxylic end.

A positively charged amino end made by protonation from the acid group make the overall charge zero. The structure of the peptide is given in the uploaded image.

To find more about peptides, refer the link below:

https://brainly.com/question/11843803

#SPJ2

Answer:

Sorry I don't know what you

According to law of conservation of mass as mass is neither created nor destroyed mass of compound should be reported as 1.86 g that is by subtracting mass of compound from mass of compound and container.

According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .

Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.

Law needs to be modified in accordance with laws of quantum mechanics under the principle of mass and energy equivalence.This law was proposed by Antoine Lavoisier in the year 1789.

Learn more about law of conservation of mass,here:

https://brainly.com/question/13383562

#SPJ2

Answer:

17

Explanation:

Step 1: Calculate the needed concentrations

[A]i = 1.00 mol/5.00 L = 0.200 M

[B]i = 1.80 mol/5.00 L = 0.360 M

[B]e = 1.00 mol/5.00 L = 0.200 M

Step 2: Make an ICE chart

        A(aq) + 2 B(aq) ⇄ C(aq)

I       0.200    0.360        0

C        -x           -2x         +x

E     0.200-x  0.360-2x   x

Then,

[B]e = 0.360-2x = 0.200

x = 0.0800

The concentrations at equilibrium are:

[A]e = 0.200-0.0800 = 0.120 M

[B]e = 0.200 M

[C]e = 0.0800 M

Step 3: Calculate the concentration equilibrium constant (K)

K = [C] / [A] × [B]²

K = 0.0800 / 0.120 × 0.200² = 16.6 ≈ 17

the effects are: temperature rises, water shortages, and increased fire threats

QUESTION:- Manganese-55 has _____neutrons.

OPTIONS :-

A. 55

B. 30

C. 25

ANSWER:- NUMBER OF NEUTRONS IS EQUAL TO THE DIFFERENCE BETWEEN THE MASS IF THE ATOM AND ATOMIC NUMBER

SO DIFFERENCE IS EQUAL TO :- 55-25 = 30 NEUTRONS.

SO THERE IS 30 NEUTRONS IN SINGLE ATOM OF THE MANGANESE-55 ATOM.

Answer:

the mass of an atom is the sum of proton and neutron which are both concentrated in nocleus of an atom. from the question the mass is given as 55 and the proton is 25.

Answer:

mountain

Explanation:

when plates move towards each other they create mountains

Answer:

3.89 ×10^-5

Explanation:

Since they are gaseous reactants, we obtain the equilibrium constant from the given partial pressures;

p(H2O) = 0.0900 bar

p(H2) = 0.00100 bar

p(O2) = 0.00350 bar

The equation of the reaction is;2H2O(g)⇄2H2(g)+O2(g)

Kp= p(H2) . p(O2)/p(H2O)

Kp= 0.00100 × 0.00350/0.0900

Kp= 3.89 ×10^-5

Answer:A) V = 16.892 ml

Explanation:

M1 * V1 = M2 * V2

14.8 M * V1 =0.250 M * 1000 ml

V1 = 16.892 ml

a. The volume of 16.89 milliliters of the stock solution of 14.8 M  should be diluted to make 1000.0 mL of 0.250 M.

b. The concentration of the final solution is 0.296 M.

The concentration or the volume of the concentrated or dilute solution can be calculated by using the equation:

M₁V₁ = M₂V₂

where M₁ and V₁ are the concentration and volume of the concentrated solution respectively and M₂ and V₂ are the concentration and volume of the dilute solution.

A stock solution is a solution that has a high concentration and that will be diluted to a low concentration by the addition of water in it.

Given, a stock solution of concentration, M₁ = 14.8 M

The concentration of the diluted solution, M₂ = 0.250 M

The volume of diluted solution, V₂  = 1000ml

Substitute the value of the molarity and volume in equation (1):

(14.8)× (V₁) = (1000) × (0.250)

V₁ = 16.89 ml

Similarly, for part (b): M₁ = 14.8 M, V₁ = 10 ml and V₂  = 0.5L = 500 ml

(14.8)× (10) = (500) × (M₂)

M₂ = 0.296 M

Learn more about dilution law, here:

https://brainly.com/question/15718488

#SPJ5

Answer:

5g/cm3

Explanation:

firstly convert the litres and kilograms to grams and centimeters.

1l is equivalent to 1000cm3

0.58×1000

580cm3

and 1kg is equivalent to 1000g

2.9×1000

2900

then find the density by using the formula

density=mass/volume

=2900g/580cm3

=5g/cm3

I hope this helps

Answer:

the number is 7

Explanation:

"Three times" means multiply by 3

"Difference" means subtract

"Sum" means add

3(x - 7) = 23 - (3x + 2)

3x - 21 = 23 - 3x - 2

3x - 21 = 21 - 3x

6x = 42

x = 7

Answer:

heat

Explanation:

because it's the cause of change

Answer:

heat

Explanation:

because it is a natural factor that causes the change in Earth's system

Answer:

Avogadro's number is 1 mol  = 6.02 * 10^23 elements

It means that 1 mol of atoms is 6.02 * 10^23 atoms

1 mol of atoms = 6.02 * 10^23 atoms

From there, if you divide both sides by 1 mol of atoms, you get

1 = 6.02 * 10^23 atoms / 1 mol of atoms.

That means, that to pass from a number of moles of atoms to number of atoms you have to multipby by the conversion factor

         6.02*10^23  atoms Al/ 1 mol Al

That is the second option of the list.

Explanation: