Answer:
A few examples.
After 8 hours of classes, you grab the door handle and start pushing on it, harder and harder, not realizing you have to pull. Applied force is how much you can exert on the door, plus the reaction of the frame. net force is zero - the door won't budge.
Indiana Jones, while trying to grab yet another treasure that belongs in a museum, triggered a trap and a sack weighting 600N is pushing over his head. Due to his old age he's not in shape, and he manage to push back with only 500N of force. Applied force is 600N from the weight, and 500N from the archeologist. With a net force of 100N towards the old man head.
Mario and Luigi have ran out of gasoline in their car, so they're stuck pushing. Due to being in peak condition, each one applies 800N to the side of the car, dragging it forward. Applied force is 800N from each plumber, and net force is 1600 N.
How do the directions of these two post-explosion vectors compare?
Answer:
o o o G 30 30.0 30.0 5. How do the direction of these two post-explosion momentum vectors compare? 6. Use your answer to question +4, your answer to question #5, and the fact that momentum is a vector quantity to determine the post-explosion momentum of the system of two carts (i.e. the vector sum of the momentum of the two carts). 7. Use your answers to question #3 and question "6 to explain how one can say that system momentum is conserved in an explosion? S. Pick three different trials that have a different mass ratio. For each trial that you pick, fill in the table below. V/V Trial m/m 9. Analyze the data in the table above. State a rule that describes how to predict the relative velocities of the two carts after the explosion
Explanation:
calculate the mass of the earth if the radius of the earth is 6.38 × 10^6
Answer:
C
Explanation:
C is i thing
Two forces 6.0 N and 10.0 N act on an object at the same time.
Which force cannot be the resultant force on the object?
A
8.0 N
vu
LO
B
10.0 N
с
14.0 N
D
18.0 N
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
The Correct choice is ~
D. 18.0 Newtons
because the resultant force can't exceed 16 Newtons ~
17. Explain how to calculate the density of an irregular shaped object such as a
rock.
Your
answer
Answer:
Q andA : Density of an irregular shape
1: the density of something is just th mass divided by the volume:D=m\V
2: As described in the previous question the density is given by D= M\V
3: the density just means how much mass per volume.
A rock is thrown upward with a speed of 2.0m/s.
a. How long will it take the rock to reach the peak?
b. What is the maximum height it can reach?
Hi there!
(A)
When the rock reaches the peak, it will have a vertical velocity of 0 m/s. We can use the equation:
vf = vi + at
vf = final velocity (0 m/s)
vi = initial velocity (2 m/s)
a = acceleration (in this situation, due to gravity = 9.8 m/s²)
t = time (s)
0 = 2 + (-9.8)t
2/9.8 = t = .204 sec
(B)
Use the equation:
d = vit + 1/2at²
d = 2(.204) + 1/2(-9.8)(.204²)
d = .204 m
In 2-3 sentences, summarize the evidence for the big bang theory. Include the following vocab words in your response: Redshift, Galaxies, Expansion, Cosmic microwave background.
How much horsepower does 2022 sentra’s 2.0-liter dohc 16-valve 4-cylinder engine produce?
Answer:
Every Sentra is powered by a 149-hp 2.0-liter four-cylinder engine that pairs with a continuously variable automatic transmission (CVT) and front-wheel drive.
Explanation:
Look at the circuit below. What is the potential difference across lamp 2?
The potential difference across lamp #2 is 4.5 volts.
When a machine increases speed or force, another factor must have ________to do so. *
Answer:
thermal energy
Explanation:
eeg measures the synchronous electrical activity of the _____.
Công thức tính gia tốc hướng tâm trong chuyển động tròn đều
a. aht = v2/R. B. aht = v2R. C. aht = 2R. C. aht = 42f2/R.
Answer:
I am really sorry but I can't understand the question.
Can you translate the question to English?
Explanation:
A 15-volt power supply is used to power a circuit with two resistors in series. The voltage drop across R1 is 5 volts. What is the voltage drop across R2?
5 volts
20 volts
10 volts
0 volts
A 10-volt power supply is used to power a circuit, producing a current of 2 A. If total resistance of circuit is doubled, how will this affect the circuit?
A. Voltage drop across each resistor will all double to match change in resistance
B. The current will change so that the voltage drop for a complete loop through the circuit becomes 5 V.
C. The current will change so that the voltage drop for a complete loop through the current remains at 10 V.
D. The voltage drop across each resistor will be unaffected because each will remain at 0 V
(1) The voltage drop in the second resistor is 10 V.
(2) The voltage drop across each resistor will all double to match change in resistance.
The given parameters:
voltage in the circuit, V = 15 Vvoltage drop in first resistor, V1 = 5 VThe total voltage in a series circuit is given as;
[tex]V_T = IR_1 + IR_2\\\\V_T = V_1 + V_2[/tex]
The voltage drop in the second resistor is calculated as follows;
[tex]V_2 = V_T - V_1\\\\V_2 = 15 - 5\\\\V_2 = 10 \ V[/tex]
(2)
voltage supply, V = 10 Vcurrent, I = 2 AThe resistance of the circuit:
[tex]R = \frac{V}{I} = \frac{10}{2} = 5 \ ohms[/tex]
When the total resistance is doubled;
In series circuit, the current in each resistor is constant, the voltage drop is calculated as;
[tex]V = IR\\\\V = 2 (5+5)\\\\V = 20 \ V[/tex]
Thus, we can conclude that the voltage drop across each resistor will all double to match change in resistance.
Learn more here:https://brainly.com/question/14182678
with what force will Annabella’s car hit a tree if her car has a mass of 5000 kg and an acceleration of 2 m/s2
Answer:
F=10,000N
Explanation:
F=ma
m=5000kg
a=2m/s^2
[tex]F=(5000kg)*(2m/s^{2} )\\\\\\\\F=10000N[/tex]
Answer:
[tex]\boxed {\boxed {\sf 10,000 \ Newtons}}[/tex]
Explanation:
We are asked to find the force of Annabella's car when it hits a tree.
According to Newton's Second Law of Motion, force is the product of mass and acceleration. Therefore, it is calculated using the following formula:
[tex]F=ma[/tex]
The mass of the car is 5000 kilograms and the acceleration is 2 meters per second squared.
m= 5000 kg a= 2 m/s²Substitute the values into the formula.
[tex]F= (5000 \ kg)(2 \ m/s^2)[/tex]
Multiply.
[tex]F= 10,000 \ kg*m/s^2[/tex]
Convert the units. 1 kilogram meter per second squared is equal to 1 Newton, so our answer of 10,000 kg*m/s² is equal to 10,000 Newtons.
[tex]F= 10,000 \ N[/tex]
Annabella's car hits the tree with a force of 10,000 Newtons.
A medium-sized apple provides about 95.0 Calories of energy.
(a) Convert 95.0 Cal to joules.
(b) Suppose that amount of energy is transformed into kinetic energy of a 2.03 kg object initially at rest. Calculate the final speed of the object (in m/s).
(c) If that same amount of energy is added to 3.79 kg (about 1 gal) of water at 21.7°C, what is the water's final temperature (in °C)? The specific heat of water is
c = 4186
J
(kg · °C)
.
A. 95 Cal is equivalent to 397480 J
B. The final speed of the object is 625.78 m/s
C. The final temperature of the water is 46.8 °C
A. Converting 95 Cal to Joules
1 Cal = 4184 J
Therefore,
95 Cal = 95 × 4184
95 Cal = 397480 JThus, 95 Cal is equivalent to 397480 J
B. Determination of the speed of the object
Kinetic energy (KE) = 397480 J
Mass (m) = 2.03 Kg
Velocity (v) =?KE = ½mv²
397480 = ½ × 2.03 × v²
397480 = 1.015 × v²
Divide both side by 1.015
v² = 397480 / 1.015
Take the square root of both side
v = √(397480 / 1.015)
v = 625.78 m/sTherefore, the speed of the object is 625.78 m/s
C. Determination of the final temperature of the water
Mass of water (M) = 3.79 kg
Initial temperature of water (T₁) = 21.7 °C
Specific heat capacity of water (C) = 4186 J/KgºC
Heat (Q) = 397480 J
Final temperature (T₂) =?Q = MC(T₂ – T₁)
397480 = 3.79 × 4186 (T₂ – 21.7)
397480 = 15864.94 (T₂ – 21.7)
Clear the bracket
397480 = 15864.94T₂ – 344269.198
Collect like terms
397480 + 344269.198 = 15864.94T₂
741749.198 = 15864.94T₂
Divide both side by 15864.94
T₂ = 741749.198 / 15864.94
T₂ = 46.8 °CTherefore, the final temperature of the water is 46.8 °C
Learn more: https://brainly.com/question/18250635
Which vehicle will have more kinetic energy, a parked
semitruck or a car moving at 50 km/h?
Answer:
a semi truck
Explanation:
2. A student slides a 0.75 kg textbook across a table, and it comes to rest after
traveling 1.2 m. Given that the coefficient of kinetic friction between the
book and the table is 0.34, use the work-kinetic energy theorem to find
the book's initial speed.
The book's initial speed = 2.83 m/s
The mass of the textbook, m = 0.75 kg
The final speed of the textbook, v = 0 m/s (Since it comes to rest)
The distance covered by the book, d = 1.2 m
Coefficient of kinetic friction, [tex]\mu = 0.34[/tex]
The frictional force between the table and the book is calculated as:
[tex]f_k=-\mu mg\\\\ f_k=-0.34 \times 0.75 \times 9.8\\\\f_k=-2.499N[/tex]
The workdone by the textbook is calculated as:
[tex]W = Fd\\\\W=2.499(1.2)\\\\W=2.9988J[/tex]
According to the work-kinetic energy theorem:
Workdone by the book = Change in Kinetic energy
[tex]W = 0.5m(v^2-u^2)\\\\-2.9988=0.5 \times 0.75 \times (0^2-u^2)\\\\-2.99988=-0.375u^2\\\\u^2=\frac{-2.9988}{-0.375} \\\\u^2=7.9968\\\\u=\sqrt{7.9968}\\\\u=2.83m/s[/tex]
The book's initial speed = 2.83 m/s
Learn more here: https://brainly.com/question/25459845
What are 5 examples of expansion and contraction? What are their benefits?
Answer:
If you hold a hot glass tumbler under cold water, it will crack
Explanation:
This is because the outer surface of the glass comes in direct contact with cold water and contracts more compared to the inner surface.
This is one example I know.
Explain how bats use ultrasound to catch a prey
Answer:
Ultrasound is used by bats to navigate (move) and catch prey. Ultrasonic squeaks are produced by bats. These squeaks ponder prey and then return to the bat's ear. This provides bats with information about the location of prey, allowing them to catch it.
Explanation:
Can someone PLEASE HELP ME!!!!!!!!
Examples of mediums that waves can travel through are _______ Select ALL that apply.
A. Air
B. Water
C. Ground
D. Metal
Answer:
air and water
Explanation:
The matter through which a mechanical wave travels is called the medium (plural, media). There are three types of mechanical waves: transverse, longitudinal, and surface waves. They differ in how particles of the medium move when the energy of the wave passes through. The particles in a medium become disturbed and pass on this disturbance to the next one, and so on. So, the disturbance caused by the particles can travel through a medium such as air, ocean water, land, violin strings, Slinky coils, etc. Sound waves can travel through solids, liquids, or gases.
A 10 kg box is motionless on the floor. If the coefficient of static friction is 0.4 and
the coefficient of kinetic friction is 0.3 (between the box and the floor), find the
force required to start the block in motion
The force required to start the given box in motion is 39.2 N.
The given parameters;
mass of the box, m = 10 kgcoefficient of static friction, [tex]\mu_s[/tex] = 0.4coefficient of kinetic friction [tex]\mu_k[/tex] = 0.3The force required to start the box in motion must be greater or equal to static frictional force.
The magnitude of the force is calculated as follows;
[tex]F = \mu_s F_n\\\\F = \mu_s mg\\\\F = (0.4) \times (10) \times (9.8)\\\\ F = 39.2 \ N[/tex]
Thus, the force required to start the box in motion is 39.2 N.
Learn more here:https://brainly.com/question/4515354
Answer:
Explanation:
uk=0.3
us==00.4
f=10
ground acceleration =9.8
f=10×0.4×9.8=39.2
4. A net force of 15 N is exerted on a book to cause it to accelerate at a rate of 5 m/s2. Determine the mass of the
book.
a. 0.33 kg
b. 2 kg
c. 3 kg
d. 45 kg
Answer:
3 kgExplanation:
The mass of an object given it's force and acceleration can be found by using the formula
[tex]m = \frac{f}{a} \\ [/tex]
f is the force
a is the acceleration
From the question we have
[tex]m = \frac{15}{5} = 3 \\ [/tex]
We have the final answer as
3 kgHope this helps you
A machine launches a tennis ball at an angle of 45° with the horizontal, as
shown. The ball has an initial vertical velocity of 9.0 meters per second and an initial
horizontal velocity of 9.0 meters per second. The ball reaches its maximum height
0.p2 second after its launch. [Neglect air resistance and assume the ball lands at the
same height above the ground from which it was launched.]
Elapsed Time
+0.92 s
Viy = 9.0 m/s
Launcher
V = 9.0 m/s
45
Horizontal
The total horizontal distance traveled by the tennis ball during the entire time it is in the air is
The motion or path of the tennis ball is the path of a projectile, which has
both vertical and horizontal motion.
The total horizontal distance traveled by the tennis ball during the entire
time it is in the air ≈ 16.514 meters.
Reasons:
The given parameters are;
The direction in which the ball is launched = 45°
The initial vertical velocity of the ball, [tex]v_y[/tex] = 9.0 m/s
The initial horizontal velocity of the ball, vₓ = 9.0 m/s
The time it takes the ball to reach the maximum height, t = 0.92 seconds after its launch
The total horizontal distance traveled, by the tennis ball is given by the formula;
[tex]\Delta d_x = \dfrac{v_1^2 \cdot \left( 2 \cdot cos(\theta) \sin(\theta)}{y} = \dfrac{2 \times v_x \times v_y}{g}[/tex]
Which gives;
[tex]\mathrm{The \ total \ distance \ travelled, \ \Delta} d_x = \dfrac{2 \times 9.0\times 9.0}{9.81} \approx 16.514[/tex]
The total horizontal distance traveled by the tennis ≈ 16.514 meters
Learn more here:
https://brainly.com/question/14892195
a Name the store of energy when you are
pressing downwards on the stretchy skin
of the trampoline
An object with a kinetic energy of 1125J has a
mass of 250kg. What is its velocity?
Answer:
3 m/s
Explanation:
Kinetic energy of a body is given by the formula [tex]K= {1\over2} m v^2[/tex]. Let's replace everything we have and solve for what's left.
[tex]1125J = {1\over2}\cdot 250 kg \cdot v^2[/tex]
[tex]v^2 ={ 1125 \cdot 2 \over 250}}[/tex] or [tex]v= 3 {m \over s}[/tex]
There are seven fundamental quantities in physics. true or false
Answer:
True
Explanation:
mass, length, time, electric current, temperature, luminous intensity and amount of substance
What are the positive and negative effects of tapping or harnessing geothermal energy? Cite ways to address the different environmental concerns related to both sources of energy
Answer:
It is a renewable resource as it renewably heats up water to a high temperature. Geothermal energy is more environmentally friendly than conventional fuel sources such as coal and other fossil fuels. In addition, the carbon footprint of a geothermal power plant is low.
Disadvantages: If dug deep underground, it can cause earthquakes. generates waste, reservoirs require proper management, it's location-specific, has high initial cost
what’s the energy of motion
A.thermal energy
B. temperature
C. heat
D. kinetic energy
E.potential energy
Answer:
D. Kinetic energy
hope this helps
Answer:
D. Kinetic energy
Explanation:
The combination of kinetic energy and potential energy is known as mechanical energy
[tex]{ \tt{}}[/tex]
Tell me in simple words what gravitation is.
Answer:
The movement, or a tendency to move, toward a center of gravity, as in the falling of bodies to the earth is called gravitation
Are these pictures below an example of reflection or refraction?
Answer:
Refraction
Explanation:
Reflection involves a change in direction of waves when they bounce off a barrier.
Refraction of waves involves a change in the direction of waves as they pass from one medium to another.
Please mark as brainliest if this helps! :)
3. What will happen when a light bulb is removed from the circuit below?
A .The remaining light bulbs go out.
B. The remaining light bulbs witdim
C.The brightness of the remaining light bulbs will not change
D.The remaining light but will brighten
Answer:
it's A.The remaining light bulbs go out.
