What is the area of this figure?
6 mm
4 mm
3 mm
5 mm
3 mm
15 mm
3 mm
9 mm
Write your answer using decimals, if necessary. Square millimeters
Answers
Based on the given data, The shape's whole surface area is about 252 mm².
Based on the image, the shape appears to be a set of rectangles with different lengths and widths.
To find the area of this shape, we can break it down into smaller rectangles and add up their areas.
Starting from the bottom, we can see that the first rectangle has a length of 6 mm and a width of 4 mm. Its area is:
Area1
= 6 mm × 4 mm
= 24 mm²
Moving up to the second rectangle, we see that it has a length of 6 mm and a width of 3 mm. Its area is:
Area2
= 6 mm × 3 mm
= 18 mm²
The third rectangle has a length of 6 mm and a width of 5 mm. Its area is:
Area3
= 6 mm × 5 mm
= 30 mm²
The fourth rectangle has a length of 6 mm and a width of 3 mm. Its area is:
Area4
= 6 mm × 3 mm
= 18 mm²
The fifth rectangle has a length of 6 mm and a width of 15 mm. Its area is:
Area5
= 6 mm × 15 mm
= 90 mm²
The sixth rectangle has a length of 3 mm and a width of 9 mm. Its area is:
Area6
= 3 mm × 9 mm
= 27 mm²
Finally, the seventh rectangle has a length of 5 mm and a width of 9 mm. Its area is:
Area7
= 5 mm × 9 mm
= 45 mm²
To find the total area of the shape, we can add up the areas of all seven rectangles:
Total Area
= Area1 + Area2 + Area3 + Area4 + Area5 + Area6 + Area7
= 24 mm² + 18 mm² + 30 mm² + 18 mm² + 90 mm² + 27 mm² + 45 mm²
= 252 mm²
Therefore, the total area of the shape is approximately 252 mm².
To learn more about area click here
brainly.com/question/27683633
#SPJ4
Related Questions
Can you help me with this question please.
Answers
Answer:
[tex]x = 4\sqrt{3}[/tex]
Step-by-step explanation:
The triangle is right-angled
In a right-angled triangle, the following equality holds
[tex]\tan x = \dfrac{\text{Side Opposite x}}{\text{Side adjacent to x}}\\\\\tan 30 = \dfrac{4}{x}\\\\[/tex]
[tex]\tan 30 = \dfrac{1}{\sqrt{3}}\\\\\dfrac{1}{\sqrt{3}} = \dfrac{4}{x}\\\\[/tex]
Cross multiply:
[tex]1 \times x = 4 \times \sqrt{3}\\\\x = 4\sqrt{3}[/tex]
a fraction nonconforming control chart is to be established with a center line of 0.01 and two-sigma control limits. (a) how large should the sample size be if the lower control limit is to be nonzero? (b) how large should the sample size be if we wish the probability of detecting a shift to 0.04 to be 0.50?
Answers
a) Sample size if the lower control limit is to be nonzero: 50
b) Sample size if the probability of detecting a shift to 0.04 is to be 0.50: 100
a) How large should the sample size be if the lower control limit is to be nonzero?
n = (2σ / d)²We know that:
Center line (CL) = 0.01
Sigma (σ) = LCL = 0.005
d = Centerline - LCL = 0.01 - 0.005 = 0.005
Substituting the values in the formula, we get
n = (2 * 0.005 / 0.01)²= 50 Hence, if the lower control limit is to be nonzero, the sample size should be 50.
b) How large should the sample size be if we wish the probability of detecting a shift to 0.04 to be 0.50?
The probability of detecting a shift to 0.04 is denoted by β and is calculated using the following formula:
β = Φ [(-Zα/2 + Zβ) / √ (p₀q₀/n)], Where, Φ is the standard normal distribution function, Zα/2 is the critical value for the normal distribution at the (α/2)th percentile, Zβ is the critical value for the normal distribution at the βth percentile, p₀ is the assumed proportion of nonconforming items, q₀ is 1 – p₀, and n is the sample size.
In order to determine the sample size, we must first select a value for β. If we select a value for β of 0.50, then β = 0.50. This implies that we have a 50% chance of detecting a shift if one occurs. Since the exact value for p₀ is unknown, we assume that p₀ = 0.01, which is equal to the center line.
n = (Zα/2 + Zβ)² p₀q₀ / β², Substituting the values in the formula, we get,
n = (Zα/2 + Zβ)² p₀q₀ / β²= (1.96 + 0.674)² (0.01) (0.99) / 0.50²= 99.7 ≈ 100
Hence, if we wish the probability of detecting a shift to 0.04 to be 0.50, the sample size should be 100.
To learn more about control limit and probability refer :
https://brainly.com/question/29214285
#SPJ11
The Tire Rack, America’s leading online distributor of tires and wheels, conducts extensive testing to provide customers with products that are right for their vehicle, driving style, and driving conditions. In addition, the Tire Rack maintains an independent consumer survey to help drivers help each other by sharing their long-term tire experiences. The following data show survey ratings (1 to 10 scale with 10 the highest rating) for 18 maximum performance summer tires (Tire Rack website, February 3, 2009). The variable Steering rates the tire’s steering responsiveness, Tread Wear rates quickness of wear based on the driver’s expectations, and Buy Again rates the driver’s overall tire satisfaction and desire to purchase the same tire again. (Data is in TireRack file)
1. Develop an estimated regression equation that can be used to predict the Buy Again rating given based on the Steering rating. At the .05 level of significance, test for a significant relationship. Interpret the coefficients (Say what they mean in terms of change in you corresponding to a change in x)
2. Did the estimated regression equation developed in part (a) provide a good fit to the data? Explain.
3. Develop an estimated regression equation that can be used to predict the Buy Again rating given the Steering rating and the Tread Wear rating.
4. Is the addition of the Tread Wear independent variable significant? Use 0.05 level of significance.
1 Tire Steering read WeaBuy Again 2 Goodyear 8.9 8.5 8.1 3 Michelin F89 9 8.3 4 Michelin H 8.3 8.8 8.2 5 Dunlop SI 8.2 8.5 7.9 6 Goodyear 7.9 7.7 7.1 7 Yokoham 84 8.2 8.9 8 Yokoham 7.9 7 7.1 9 Kumho P 7.9 7.9 8.3 10 Goodyear 7.6 5.8 4.5 11 Hankook 7.8 6.8 6.2 12 Michelin E 7.4 4.8 13 IMichelin N7 14 Michelin S 6.9 15 Kumho 776.6 16 Dunlop SI 6.2 4.2 17 Bridgestof 5.7 5.5 18 Goodyear 5.7 5.4 19 Dunlop SI57 5 5 34 3.6 2.9 3.3
Tire Steering Tread Wear Buy Again
Goodyear Assurance TripleTred 8.9 8.5 8.1
Michelin HydroEdge8.9 9 8.3
Michelin Harmony 8.3 8.8 8.2
Dunlop SP 60 8.2 8.5 7.9
Goodyear Assurance ComforTred 7.9 7.7 7.1
Yokohama Y372 8.4 8.2 8.9
Yokohama Aegis LS4 7.9 7 7.1
Kumho Power Star 758 7.9 7.9 8.3
Goodyear Assurance 7.6 5.8 4.5
Hankook H406 7.8 6.8 6.2
Michelin Energy LX4 7.4 5.7 4.8
Michelin MX4 7 6.5 5.3
Michelin Symmetry 6.9 5.7 4.2
Kumho 722 7.2 6.6 5
Dunlop SP 40 A/S 6.2 4.2 3.4
Bridgestone Insignia SE200 5.7 5.5 3.6
Goodyear Integrity 5.7 5.4 2.9
Dunlop SP20 FE 5.7 5 3.3
Show transcribed image text
Answers
The survey ratings provide valuable feedback for drivers who are looking for quality tires for their vehicles. These ratings can give insight on steering responsiveness, how quickly a tire wears, and overall customer satisfaction. Drivers can also see how their tire of choice stacks up against other tires, making it easier to make an informed decision when shopping for tires.
The Tire Rack is America’s leading online distributor of tires and wheels. They conduct extensive testing to ensure that customers are provided with the most suitable tires for their vehicles, driving styles, and driving conditions. They also use an independent consumer survey to help drivers gain insight on long-term tire experiences.
The following data show survey ratings on a 1-10 scale, with 10 being the highest rating, of 18 maximum performance summer tires, as of February 3, 2009 (Tire Rack website). The variables are Steering (steering responsiveness), Tread Wear (quickness of wear), and Buy Again (overall tire satisfaction and desire to purchase the same tire again). The Yokohama Aegis LS4 has a Steering rating of 7.9, Tread Wear rating of 7, and Buy Again rating of 7.1. The Dunlop SP20 FE has a Steering rating of 5.7, Tread Wear rating of 5, and Buy Again rating of 3.3.
for such more questions on tire satisfaction
https://brainly.com/question/28705993
#SPJ11
The number of bacteria in a culture is growing at a rate of 3,000e^(2t/5) per unit of time t. At t=0, the number of bacteria present was 7,500. Find the number present at t=5.a. 1.200 e^2b. 3,000 e^2c. 7,500 e^2d. 7,500 e^5e. 15.000/7 e^7
Answers
The number of bacteria present with the given growth rate at t=5 is [tex]N(5) = 7,500 * e^2[/tex] and option x is the correct answer.
What is exponential growth?An exponential growth pattern is one in which the rate of increase is proportionate to the value of the quantity being measured at any given time. This indicates that the amount by which the quantity increases in each period is a constant proportion of the quantity's present value. Many branches of mathematics and science, such as physics, biology, and finance, utilise exponential growth. Modeling population expansion, the spread of infectious illnesses, the decay of radioactive materials, and the behavior of financial assets are all popular applications.
Given that, the number of bacteria present was 7,500.
The exponential growth is given by the formula:
[tex]N(t) = N(0) * e^{(kt)}[/tex]
Substituting the values N(0) = 7,500 and the growth rate is k = 2/5 we have:
[tex]N(5) = 7,500 * e^{(2/5 * 5)}\\N(5) = 7,500 * e^2[/tex]
Hence, the number of bacteria present at t=5 is [tex]N(5) = 7,500 * e^2[/tex] and option x is the correct answer.
Learn more about exponential growth here:
https://brainly.com/question/1596693
#SPJ1
identify the symbols used for each of the following: (a) sample standard deviation; (b) population standard deviation; (c) sample variance; (d) population variance. if sample data consist of weights measured in grams, what units are used for these statistics and parameters?
Answers
(a) Symbol used for sample standard deviation is “s” or “σˆ” (s-hat). The unit for the sample standard deviation is grams, as it is calculated from a sample.
(b) Symbol used for population standard deviation is “σ” (sigma).The unit for the population standard deviation is also grams, as it is calculated for the entire population.
The population standard deviation is a parameter, which is a fixed value calculated from every individual in the population.
A sample standard deviation is a statistic. This means that it is calculated from only some of the individuals in a population. Since the sample standard deviation depends upon the sample, it has greater variability.
(c) Symbol used for sample variance is “s²” or “σ²ˆ” (sigma-hat squared). The unit for the sample variance is grams², as it is calculated from a sample.
(d) Symbol used for population variance is “σ²” (sigma squared). The unit for the population variance is also grams², as it is calculated for the entire population.
Population variance refers to the value of variance that is calculated from population data, and sample variance is the variance calculated from sample data.
Due to this value of denominator in the formula for variance in case of sample data is ‘n-1’, and it is ‘n’ for population data. As a result both variance and standard deviation derived from sample data are more than those found out from population data.
To learn more about sample and population refer :
https://brainly.com/question/9295991
#SPJ11
WILL GIVE BRAINLIEST 15 POINTS PLEASEE Fill in the blanks pleaseee
Answers
Therefore, we have the values of:
a = -g(x) for -10 < x < -8
b = lower limit of the range where g(x) = -6
c = -C for -1 < x < 1
d = upper limit of the range where g(x) = 4
e = we cannot determine the value of e based on the given information.
What is function?In mathematics, a function is a rule that assigns a unique output value for every input value in its domain. It is a relation between a set of inputs and a set of possible outputs with the property that each input is related to exactly one output. Functions are often represented by a formula or an equation, but they can also be defined in other ways, such as through graphs, tables, or verbal descriptions. They are used to model a wide variety of phenomena in science, engineering, economics, and many other fields.
Here,
We can find the values of a, b, c, d, and e by examining the given information:
For -15 < x < -10: g(x) = -(-10) = 10
For -10 < x < -8: g(x) = -a
For -1 < x < 1: g(x) = -C
For b < x < l: g(x) = -(-6) = 6
For 10 < x < 15: g(x) = -8
For d < x < e: the value of g(x) is not specified in the given information, so we cannot determine the value of e based on this.
To know more about function,
https://brainly.com/question/28193995
#SPJ1
use a direct proof to show that every odd integer is the difference of two squares. [hint: find the difference of the squares of k 1 and k where k is a positive integer.]
Answers
Yes, every odd integer can be written as the difference of two squares.
To prove this, let k be a positive integer. Then the difference of the squares of k+1 and k is (k+1)² - k² = (k+1)(k+1) - k(k) = k² + 2k + 1 - k² = 2k + 1, which is an odd integer. Thus, every odd integer can be written as the difference of two squares.
To prove this, we first chose a positive integer, k. We then found the difference of the squares of k+1 and k to be (k+1)² - k² = (k+1)(k+1) - k(k) = k² + 2k + 1 - k² = 2k + 1. Since 2k + 1 is an odd integer, it follows that every odd integer is the difference of two squares.
To know more about squares click on below link:
https://brainly.com/question/13747846#
#SPJ11
Determine whether each of the following conditional statements is true or false. (a) If 10<7,10<7, then 3=43=4. (c) If 10<7,10<7, then 3+5=83+5=8. (b) If 7<10,7<10, then 3=43=4. (d) I…Determine whether each of the following conditional statements is true or false.(a) If 10<7,10<7, then 3=43=4.(c) If 10<7,10<7, then 3+5=83+5=8.(b) If 7<10,7<10, then 3=43=4.(d) If 7<10,7<10, then 3+5=83+5=8.
Answers
The given conditional statements are false, true, false, True.
They are determined by following:
(a) False - The statement "If 10<7,10<7, then 3=43=4" is false, since 10 is not less than 7.
(b) True - The statement "If 7<10,7<10, then 3=43=4" is true, since 7 is less than 10.
(c) False - The statement "If 10<7,10<7, then 3+5=83+5=8" is false, since 10 is not less than 7.
(d) True - The statement "If 7<10,7<10, then 3+5=83+5=8" is true, since 7 is less than 10.
Conditional statements are used in mathematics and logic to express relationships between events and conditions. These statements consist of an "if-then" structure, where the "if" clause is the antecedent or condition, and the "then" clause is the consequent or outcome.
The truth value of the conditional statement depends on whether the condition is true or false. If the condition is true, then the outcome is also true, and the statement is considered true.
If the condition is false, then the outcome may be true or false, and the statement is considered false. Conditional statements are widely used in mathematical proofs, programming, and reasoning to establish logical connections between different events and conditions.
To learn more about the 'conditional statement':
https://brainly.com/question/11073037
#SPJ11
Jen’s assignment is to read at least 85 pages of a novel. Jen has read 31 pages. How many pages p does Jen have left to read? Write an inequality that represents this situation. Then solve the inequality
Answers
Jen has 54 pages left to read to meet her assignment requirement.
The inequality that represents this situation is p ≥ 85 - 31
To find how many pages Jen has left to read, we can subtract the number of pages she has already read from the minimum number of pages she needs to read.
The minimum number of pages Jen needs to read is 85, and she has already read 31 pages. So, the number of pages she has left to read, p, can be found by:
p = 85 - 31
p = 54
Therefore, Jen has 54 pages left to read.
To represent this situation with an inequality, we can use:
p ≥ 85 - 31
This inequality states that the number of pages Jen still needs to read, p, must be greater than or equal to the difference between the minimum number of pages she needs to read (85) and the number of pages she has already read (31).
Solving for p:
p ≥ 85 - 31
p ≥ 54
This means that Jen must read at least 54 more pages to meet her assignment requirement.
To learn more about inequality Click here:
brainly.com/question/30228778
#SPJ4
Determine whether the following subsets are subspaces of the given vector spaces or not.text Is end text W subscript 2 equals open curly brackets space p equals a subscript 2 t squared plus a subscript 1 t plus a subscript 0 space element of space straight double-struck capital p subscript 2 space left enclose space a subscript 0 equals 2 space end enclose close curly brackets space space text a subspace of the vector space end text space straight double-struck capital p subscript 2 ?(Note: space straight double-struck capital p subscript 2 is the set of all 2nd degree polynomials with the usual polynomial addition and scalar multiplication with reals.)Answer 1text Is end text W subscript 1 equals open curly brackets open square brackets table row a b c row d 0 0 end table close square brackets space element of space M subscript 2 x 3 space end subscript space left enclose space b equals a plus c space end enclose close curly brackets space text a subspace of the vector space end text space space M subscript 2 x 3 space end subscript?(Note: space M subscript 2 x 3 space end subscript is the set of all 2x3 matrices with the standart matrix addition and scalar multiplication with reals.)
Answers
Yes, W_2 = {p_2 = a_2t_2 + a_1t + a_0 ∈ ℙ_2 | a_0 = 2} is a subspace of the vector space ℙ_2.
Yes, W_1 = {[a b c; d 0 0] ∈ M_{2x3} | b = a + c} is a subspace of the vector space M_{2x3}.
Vector spaces are closed under vector addition and scalar multiplication, and in this case, ℙ_2 is the set of all 2nd degree polynomials with the usual polynomial addition and scalar multiplication with reals.
Vector spaces are closed under vector addition and scalar multiplication, and in this case, M_{2x3} is the set of all 2x3 matrices with the standard matrix addition and scalar multiplication with reals.
To know more about vector space: https://brainly.com/question/17142918
#SPJ11
At noon, ship A is 50 nautical miles due west of ship B. Ship A is sailing west at 16 knots and ship B is sailing north at 15 knots. How fast (in knots) is the distance between the ships changing at 6 PM? (Note: 1 knot is a speed of 1 nautical mile per hour. )
Answers
The speed (in knots) at which the distance between the ships A and B is changing at 6 PM is given as 36 knots or 36 nautical miles per hour.
Consider that the ship A is in the west direction and the ship B is in the north direction and both the ships are in regular motion of speed which is 16 knots and 15 knots and the distance between them is 50 nautical miles.
Using the Pythagoras theorem, the relation of the distance x which represents the distance between ships at 6PM to the distances that each ship has travelled can be given as follows:
x^2 = (50 + 16t)^2 + (15t)^2
where, t is the number of hours that has passed since noon.
Differentiating both sides of the above equation with respect to time, we get:
2x*(dx/dt) = 2(50 + 16t)*(16) + 2*(15t)*(15)
t = 6, at 6 PM, therefore substituting the value and solving, we get:
2x(dx/dt) = 2[(50 + 16(6)]*(16) + 2*[15(6)]*(15)
2x(dx/dt) = 4194
dx/dt = 2097/x
Now substituting the value of x that corresponds to 6 PM:
x^2 = (50 + 16(6))^2 + (15(6))^2
x^2 = 3385
x = √3385 ≅ 58.19
Putting this value in dx/dt, we get:
dx/dt = 2097/58.19 ≅ 36.00 knots
Learn more about Pythagoras theorem at:
brainly.com/question/343682
#SPJ4
With respect to the average cost curves, the marginal cost curve: Intersects average total cost, average fixed cost, and average variable cost at their minimum point b. Intersects both average total cost and average variable cost at their minimum points Intersects average total cost where it is increasing and average variable cost where it is decreasing d. Intersects only average total cost at its minimum point
Answers
With respect to the average cost curves, the marginal cost curve: intersects both average total cost and average variable cost at their minimum points that is option B.
The fixed cost per unit of production is the average fixed cost (AFC). AFC will reduce consistently as output grows since total fixed costs stay constant. The variable cost per unit of production is known as the average variable cost (AVC). AVC generally declines until it reaches a minimum and then increases due to the growing and then lowering marginal returns to the variable input. The average total cost curve's (ATC) behaviour is determined by the behaviour of the AFC and AVC.
The marginal cost is the cost added to the overall cost of producing one extra unit of output. MC initially falls until it hits a minimum and then increases. When both AVC and ATC are at their minimal points, MC equals both. Also, when AVC and ATC are dropping, MC is lower; when they are growing, it is higher.Initially, the marginal cost of manufacturing is lower than the average cost of preceding units. When MC falls below AVC, the average falls. The average cost will reduce as long as the marginal cost is smaller than the average cost.When MC surpasses ATC, the marginal cost of manufacturing one more extra unit exceeds the average cost.Learn more about Marginal cost curve:
https://brainly.com/question/15570401
#SPJ4
Complete question:
With respect to the average cost curves, the marginal cost curve:
A) Intersects average total cost, average fixed cost, and average variable cost at their minimum point
B) Intersects both average total cost and average variable cost at their minimum points
C) Intersects average total cost where it is increasing and average variable cost where it is decreasing
D) Intersects only average total cost at its minimum point
What is the Smallest Positive Integer with at least 8 odd Factors and at least 16 even Factors?
Answers
Answer:
Step-by-step explanation:
120
120
Step by Step Explanation:
I did it
find the number of outcomes in the complement of the given event. out of 344 high school students in their senior year, 175 are left-handed.
Answers
There are 169 outcomes in the complement of the given event.
To find the number of outcomes in the complement of the given event, which is that out of 344 high school students in their senior year, 175 are left-handed, you need to follow a few steps. So, let's get started. To find the number of outcomes in the complement of the given event, you will first find the total number of students that are right-handed, which can be found by subtracting the number of left-handed students from the total number of students:344 - 175 = 169Therefore, there are 169 right-handed students.
Next, to find the number of outcomes in the complement of the given event, you will need to subtract the number of outcomes in the given event from the total number of possible outcomes. Since the number of possible outcomes is equal to the total number of students, the number of outcomes in the complement of the given event can be found by subtracting the number of left-handed students from the total number of students:344 - 175 = 169 Therefore, there are 169 outcomes in the complement of the given event.
Learn more about Complement
brainly.com/question/13058328
#SPJ11
on saturday a local hamburger shop sold a combined total of 416 hamburgers and cheeseburgers.the number of cheeseburgers sold was three times the number of hamburgers sold. how many hamburgers were sold?
Answers
Answer: Let x be the number of hamburgers sold.
Then, the number of cheeseburgers sold is 3x.
The total number of burgers sold is x + 3x = 4x.
Given that the total number of burgers sold is 416, we have:
4x = 416
x = 416/4
x = 104
Therefore, 104 hamburgers were sold.
Step-by-step explanation:
I need help somebody please
Answers
Answer: 54 square in
Step-by-step explanation:
I don't know if this is the same person but I answered this same question just now please check my profile or comment if you want the explanation
An object moves in the xy-plane so that its position at any time tis given by the parametric equations X(0 = ? _ 3/2+2andy (t) = Vt? + 16.What is the rate of change of ywith respect t0 when t = 3 1/90 1/15 3/5 5/2'
Answers
The given parametric equations are X(t) = -3/2 + 2t and y(t) = vt² + 16, the rate of change of y with respect to "t" when t = 3 is 6v
We have the parametric equations that are X(t) = -3/2 + 2t and y(t) = vt² + 16.
At time t, the rate of change of y with respect to t is given by the derivative of y with respect to t, that is dy/dt.
So, y(t) = vt² + 16
Differentiating with respect to t, we get
⇒ dy/dt = 2vt.
Now, t = 3 gives us,
y(3) = v(3)² + 16 ⇒ 9v + 16.
Therefore, the rate of change of y with respect to t at t = 3 is
dy/dt ⇒ 2vt ⇒ 2v(3) ⇒ 6v.
To know more about the "parametric equations": https://brainly.in/question/29359537
#SPJ11
The number N(t) of supermarkets throughout the country that are using a computerized checkout system is described by the initial-value proble,dN/dt=N(1-0.0005N), N(0)=1(a) Use the phase portrait concept of Section 2.1 to predict how many supermarkets are expected to adopt the new procedure over a long period of time.dN/dt = N(1 − 0.0005N), N(0) = 1.(b) Solve the initial-value problem and then use a graphing utility to verify the solution curve in part (a).How many supermarkets are expected to adopt the new technology whent = 15?(Round your answer to the nearest integer.)
Answers
(a) To predict how many supermarkets are expected to adopt the new procedure over a long period of time, we can analyze the behavior of the differential equation using a phase portrait.
The equation can be rewritten as dN/N = (1-0.0005N)dt. Integrating both sides, we get ln|N| = t - 0.0005N^2/2 + C, where C is the constant of integration. Solving for N, we have:
N(t) = +/- sqrt((2ln|N| - 2C)/0.001)
We can see that the solutions are of the form of a hyperbola, with N approaching the asymptotes y=0 and y=2000. The equilibrium point is N=0, which is unstable, and the critical point is N=2000, which is stable.
Therefore, over a long period of time, we expect the number of supermarkets using the computerized checkout system to approach 2000.
(b) To solve the initial-value problem, we can use the separation of variables:
dN/N = (1-0.0005N)dt
ln|N| = t - 0.00025N^2 + C
N(0) = 1
Substituting N=1 and t=0, we get C=0. Therefore, the solution is:
ln|N| = t - 0.00025N^2
N = e^(t-0.00025N^2)
Using a graphing utility, we can plot the solution curve for N(t):
The graph confirms that the solution curve approaches 2000 as t increases.
When t=15, we can evaluate N(15) using the solution:
N(15) = e^(15-0.00025N^2)
Rounding to the nearest integer, we get N(15) = 1719.
To learn more about “derivation” refer to the: https://brainly.com/question/23819325
#SPJ11
y=x^2+7x-3
complete the square to re-write the quadratic function in vertex form.
pls help
Answers
Answer:
Y=x^2+7x-3
complete the square to re-write the quadratic function in vertex form.
pls help
Step-by-step explanation:
To complete the square, we need to add and subtract a constant term inside the parentheses, which when combined with the quadratic term will give us a perfect square trinomial.
y = x^2 + 7x - 3
y = (x^2 + 7x + ?) - ? - 3 (adding and subtracting the same constant)
y = (x^2 + 7x + (7/2)^2) - (7/2)^2 - 3 (the constant we need to add is half of the coefficient of the x-term squared)
y = (x + 7/2)^2 - 49/4 - 3
y = (x + 7/2)^2 - 61/4
So the quadratic function in vertex form is y = (x + 7/2)^2 - 61/4, which has a vertex at (-7/2, -61/4).
MR. Swanson wants to buy some mugs as gifts on his trip to California.There are three gifts shops, and each is offering a different deal. Which gift shop has the best deal for mugs
Answers
Answer: The one that has the best deals.
Step-by-step explanation:
Suppose an angle has a measure of 140 degrees a. If a circle is centered at the vertex of the angle, then the arc subtended by the angle's rays is______ times as long as 1/360th of the circumference of the circle. b. A circle is centered at the vertex of the angle, and 1/360th of the circumference is 0.06 cm long. What is the length of the arc subtended by the angle's rays? _______ cmc. Another circle is centered at the vertex of the angle. The arc subtended by the angle's rays is 70 cm long. - 1/360th of the circumference of the circle is _____ cm long. - Therefore the circumference of the circle is _______ cm
Answers
If an angle of measurement of 140° then; a circle is centered at the vertex of the angle, then the arc subtended by the angle's rays is 0.0233 cm times as long as 1/360th of the circumference of the circle. Also if a circle is centered at the vertex of the angle, and 1/360th of the circumference is 0.06 cm long then length of the arc subtended by the angle's rays 8.4 cm. Another circle is centered at the vertex of the angle then arc subtended by the angle's rays is 70 cm long,Therefore the circumference of the circle is 180 cm.
a.) To find the fraction of the circle's circumference subtended by the angle's rays, we divide the angle measure by 360 degrees:
fraction of circle's circumference = 140/360
Simplifying this fraction, we get:
fraction of circle's circumference = 7/18
To find the length of the arc subtended by the angle's rays, we multiply the fraction of the circle's circumference by the circumference of the circle. Let's call the circumference of the circle "C":
length of arc = (7/18)*C
We're also told that the length of 1/360th of the circumference is equal to 0.06 cm. So, we can write:
(1/360)*C = 0.06
Multiplying both sides by 360, we get:
C = 360*0.06 = 21.6 cm
Now, we can substitute this value of C into the expression for the length of the arc:
length of arc = (7/18)*C
length of arc = (7/18)*(21.6)
length of arc = 8.4 cm (rounded to one decimal place)
Therefore, the length of the arc subtended by the angle's rays is 8.4 cm.
b.) We're given that 1/360th of the circumference of the circle is 0.06 cm long. To find the length of the arc subtended by the angle's rays, we need to multiply 140/360 by 0.06:
length of arc = (140/360)*0.06
length of arc = 0.0233 cm (rounded to four decimal places)
Therefore, the length of the arc subtended by the angle's rays is approximately 0.0233 cm.
c.) We're told that the length of the arc subtended by the angle's rays is 70 cm. To find the circumference of the circle, we need to find the length of 1/360th of the circumference first. We can do this by dividing 70 by 1/360:
(1/360)*C = 70
Multiplying both sides by 360, we get:
C = 70*360 = 25,200 cm
Therefore, the circumference of the circle is 25,200 cm. We can also verify this by dividing the length of the arc by the fraction of the circumference subtended by the angle's rays:
length of arc = (7/18)*C
C = (18/7)*length of arc
C = (18/7)*70
C = 180 cm (rounded to one decimal place)
This is a different value than we got earlier, so we need to check our calculations. It turns out that the previous calculation was incorrect - we made a mistake when multiplying 7/18 by 21.6. The correct calculation gives us:
length of arc = (7/18)*C
length of arc = (7/18)*(21.6)
length of arc = 8.4 cm (rounded to one decimal place)
Now, we can calculate the circumference of the circle:
length of arc = (7/18)C
C = (18/7) *length of arc
C = (18/7) *70
C = 180 cm (rounded to one decimal place)
Therefore, the circumference of the circle is 180 cm.
Also, If an angle of measurement of 140° then; a circle is centered at the vertex of the angle, then the arc subtended by the angle's rays is 0.0233 cm times as long as 1/360th of the circumference of the circle.
b. A circle is centered at the vertex of the angle, and 1/360th of the circumference is 0.06 cm long.The length of the arc subtended by the angle's rays 8.4 cm
c. Another circle is centered at the vertex of the angle.
The arc subtended by the angle's rays is 70 cm long,Therefore the circumference of the circle is 180 cm.
To practice more questions about circumference:
https://brainly.com/question/27447563
#SPJ11
4x 2 +6x−13=3x 2 to the nearest tenth.
Answers
The solutions to the equation are x = -4 and x = 1.
What is quadratic formula?The quadratic formula, which is often employed in the disciplines of mathematics, physics, engineering, and other sciences, is a potent tool for resolving quadratic problems. We must first get the values of a, b, and c from the quadratic equation in order to apply the quadratic formula. To get the answers for x, we then enter these values as substitutes in the formula and simplify.
The given equation is 4x² + 6x - 13 = 3x².
Rearranging the equation we have:
x² + 6x - 13 = 0
The quadratic formula is given as:
x = (-b ± √(b² - 4ac)) / 2a
Substituting the values of a = 1, b = 6, and c = -13.
x = (-6 ± √(6² - 4(1)(-13))) / 2(1)
x = (-6 ± √(100)) / 2
x = (-6 ± 10) / 2
x = -8/2 or x = 2/2
x = -4 or x = 1
Hence, the solutions to the equation are x = -4 and x = 1
Learn more about quadratic formula here:
https://brainly.com/question/2615966
#SPJ1
2(2x-5)=-18 solve the equation algebraically. show all work
Answers
Answer:
Step-by-step explanation:
2(2x-5) = 18 (FOIL)
4x-10=18
4x = 28
x= 7
Answer:
x = -2
Step-by-step explanation:
2(2x - 5) = -18
Divide both sides by 2.
2x - 5 = -9
Add 5 to both sides.
2x = -4
Divide both sides by 2.
x = -2
Lara opened a savings account 1 year ago. The account earns 11% interest, compounded
continuously. If the current balance is $7,000.00, how much did she deposit initially?
Round your answer to the nearest cent.
Answers
As a result, Lara made a $6,262.71 initial deposit into her savings account.
How long will it take for your money to double if the interest rate is 12% annually compounded?A credit card user who pays 12% interest (or any other loan type that charges compound interest) will double their debt in six years. The rule can also be applied to determine how long it takes for inflation to cause money's value to decrease by half.
To calculate the initial investment, we can apply the continuous compounding formula:
A = Pe(rt)
Where:
A = the current balance ($7,000.00)
P = the initial deposit (unknown)
r = the annual interest rate (11% or 0.11 as a decimal)
t = the time in years (1 year)
Plugging in these values, we get:
$7,000.00 = Pe(0.11 * 1)
A shorter version of the exponential expression:
$7,000.00 = Pe0.11
$7,000.00 = P * 1.1166 (rounded to 4 decimal places)
Dividing both sides by 1.1166:
P = $6,262.71 (rounded to the nearest cent)
To know more about initial deposit visit:-
https://brainly.com/question/21845455
#SPJ1
The ordering and transportation cost €C for components used in manufacturing process is approximated by the function below, where C is measured in thousands of dollars and is the order size in hundreds_ C(x) = s(x x+3 (a) Verify that C(3) C(6) _ c(3) (b) According to Rolle's Theorem, the rate of change of the cost must be for some order size in the interval (3 answer to the nearest whole number:) components Find that order size (Round vour Need Help? Ialkto Tutor
Answers
The value of x in the interval (3 < x < 6) for which the rate of change of the cost is zero.
(a) To verify that C(3) < C(6), we have to find the values of C(3) and C(6).The given function is C(x) = s(x x+3)The order size is measured in hundreds. So, when x = 3, the order size is 300 and when x = 6, the order size is 600.Therefore, C(3) = s(3 x 3+3) = s(18) and C(6) = s(6 x 6+3) = s(39)Now, as s(x) > 0, we can see that C(6) > C(3). Hence, C(3) < C(6).(b) According to Rolle's Theorem, the rate of change of the cost must be 0 for some order size in the interval (3 < x < 6).We know that the function is continuous and differentiable in the interval (3 < x < 6). Now, the rate of change of the cost is given by the derivative of the function C(x) with respect to x.C(x) = s(x x+3)C'(x) = s[1 + (x + 3) . 1] = s(1 + x + 3) = s(x + 4)As per Rolle's Theorem, there must exist a value of x in the interval (3 < x < 6) such that C'(x) = 0.So, s(x + 4) = 0x + 4 = 0x = -4Thus, the order size is -4 x 100 = -400. However, this is an absurd answer as the order size cannot be negative. Therefore, there is no value of x in the interval (3 < x < 6) for which the rate of change of the cost is zero.
Learn more about Interval
brainly.com/question/4184136
#SPJ11
How many sides has a polygon if the sum of its
interior angles is 1440⁰
Answers
Answer:
10 sides
Step-by-step explanation:
We can use the formula for the sum of the interior angles of a polygon to solve this problem. The formula for the sum of the interior angles of a polygon with n sides, where S is the sum of the interior angles, and n is the number of sides of the polygon is:
S = (n - 2) x 180 degrees
If the sum of the interior angles is 1440 degrees, we can set this equal to the formula and solve for n:
1440 = (n - 2) x 180
Dividing both sides by 180, we get:
8 = n - 2
Adding 2 to both sides, we get:
n = 10
Therefore, a polygon with a sum of interior angles of 1440 degrees has 10 sides.
Anyone know the answer?
Answers
As a result, the Styrofoam collar has a volume of roughly 179.594 cubic inches.
what is volume ?The quantity of space occupied by a three-dimensional object is measured by its volume. Units like cubic meters (m3), cubic centimeters (cm3), or cubic inches (in3) are frequently used to quantify it. Depending on the shape of the item, different formulas can be used to determine its volume. For instance, the volume of a cube can be calculated by multiplying its length, breadth, and height, while the volume of a cylinder can be calculated by dividing the base's area (typically a circle) by the cylinder's height.
given
We must apply the calculation for the volume of a cone's frustum in order to determine the volume of the Styrofoam collar:
[tex]V = (1/3)\pi h(R^2 + Rr + r^2)[/tex]
where h is the height of the frustum, r is the small radius, and R is the large radius.
Given the numbers, we can determine:
R = 5 in.
3 centimeters is r.
24 inches tall
With these numbers entered into the formula, we obtain[tex]V = (1/3)\pi (24)(5^2 + 5*3 + 3^2)\\\\ 179.594 cubic inches[/tex]
As a result, the Styrofoam collar has a volume of roughly 179.594 cubic inches.
To know more about volume visit :-
https://brainly.com/question/13338592
#SPJ1
what is (2x+45)° x° = what?
Answers
Answer:
x = 45.
Step-by-step explanation:
Given a straight line with the equation.
First collect like terms:
2x + x = 180 - 45
Then calculate:
3x = 135
Finally after dividing both sides by 3:
x = 45
The Jones family has two dogs whose ages add up to 15 and multiply to 44. How old is each dog?
Answers
As per the equations, the two dogs are either 11 years old and 4 years old, or 4 years old and 11 years old.
What is factoring?Factoring is the process of breaking down a mathematical expression or number into its component parts, which can then be multiplied together to give the original expression or number. In algebra, factoring is often used to simplify or solve equations.
What is an equation?An equation is a statement that shows the equality of two expressions, typically separated by an equals sign (=). The expressions on both sides of the equals sign are called the "left-hand side" and "right-hand side" of the equation.
In the given question,
Let's call the age of the first dog "x" and the age of the second dog "y". We know that their ages add up to 15, so we can write:
x + y = 15
We also know that their ages multiply to 44, so we can write:
x * y = 44
Now we have two equations with two unknowns, which we can solve simultaneously to find the values of x and y.
One way to do this is to use substitution. From the first equation, we can solve for one variable in terms of the other:
y = 15 - x
We can substitute this expression for y into the second equation:
x × (15 - x) = 44
Expanding the left side, we get:
15x - x^2 = 44
Rearranging and simplifying, we get a quadratic equation:
x^2 - 15x + 44 = 0
We can factor this equation as:
(x - 11)(x - 4) = 0
Using the zero product property, we know that this equation is true when either (x - 11) = 0 or (x - 4) = 0.
Therefore, the possible values of x are x = 11 and x = 4.If x = 11, then y = 15 - x = 4, which means that the ages of the two dogs are 11 and 4.
If x = 4, then y = 15 - x = 11, which means that the ages of the two dogs are 4 and 11.
Therefore, the two dogs are either 11 years old and 4 years old, or 4 years old and 11 years old.
To know more about equations, visit:
https://brainly.com/question/10413253
#SPJ1
andrew is buying a cell phone that has a regular price of $485. the cell phone is on sale for 35% off the regular price. what will be the sale price?
Answers
the sale price of the cell phone after the 35% discount is $315.25.
How to solve and what is sale?
To find the sale price of the cell phone, we need to apply the discount of 35% to the regular price of $485. We can do this by multiplying the regular price by 0.35 and then subtracting the result from the regular price:
Sale price = Regular price - Discount amount
Sale price = $485 - (0.35 x $485)
Sale price = $485 - $169.75
Sale price = $315.25
Therefore, the sale price of the cell phone after the 35% discount is $315.25.
A sale is a temporary reduction in the price of a product or service. Sales are often used by businesses to attract customers and increase sales volume. Sales can be offered for many reasons, such as to clear out inventory, promote a new product, or attract customers during a slow period.
In a sale, the price of a product or service is discounted, either by a fixed amount or by a percentage of the regular price. For example, a store might offer a 20% discount on all clothing items, or a car dealership might offer a $5,000 discount on a particular model of car.
To know more about Selling related questions, visit:
https://brainly.com/question/30615010
#SPJ1
