What is always true of a salt

Answer: A. 142.04 g/mol

Explanation:

Answer:

ethyl ethanoate and water

Explanation:

At the point when one fluid doesn't blend in with another yet glides on top of it, an isolating pipe can be utilized to isolate the two fluids. Oil glides on water. This combination can be isolated utilizing an isolating channel as demonstrated on the following page.  

Ethyl liquor and water are two miscible fluids.   Refining is a cycle that can be utilized to isolate an unadulterated fluid from a combination of fluids. An isolating channel can be utilized to isolate the parts of the combination of immiscible fluids.

The answer is ethyl ethanoate and water. Hope this helps you!

Answer:

Malachite

Explanation:

Malachite is a copper carbonate hydroxide mineral, with the equation Cu2CO3(OH)2. This dark, green-joined mineral solidifies in the monoclinic precious stone framework, and frequently shapes botryoidal, sinewy, or stalagmitic masses, in cracks and profound, underground spaces, where the water table and aqueous liquids give the way to synthetic precipitation. So, the answer is malachite. Best of Luck!

Answer:

Explanation:

Chemical change

Answer: A volume of 59 mL of 0.220 M HBr solution is required to produce 0.0130 moles of HBr.

Explanation:

Given: Moles = 0.0130 mol

Molarity = 0.220 M

Molarity is the number of moles of solute present in liter of a solution.

[tex]Molarity = \frac{moles}{volume (in L)}[/tex]

Substitute the values into above formula as follows.

[tex]Molarity = \frac{moles}{volume (in L)}\\0.220 M = \frac{0.0130 mol}{Volume (in L)}\\Volume (in L) = 0.059 L[/tex]

As 1 L = 1000 mL

So, 0.059 L = 59 mL

Thus, we can conclude that a volume of 59 mL of 0.220 M HBr solution is required to produce 0.0130 moles of HBr.

Answer:

The correct answer is - A. alkane and E. Branched.

Explanation:

Alkane is saturated hydrocarbons that are combined with a single bond they can be either linear, branched, or cyclic hydrocarbons. A branched-chain or branched compound is a compound that has alkyl groups bonded to its central carbon chain.

Branched alkanes contain only carbon atoms and hydrogen atoms bonded with these carbon atoms in different branches, with carbons connected to other carbons by single bonds only, but the molecules contain branches.

Answer:

Concentration: 0.185M HX

Ka = 9.836x10⁻⁶

pKa = 5.01

Explanation:

A weak acid, HX, reacts with NaOH as follows:

HX + NaOH → NaX + H2O

Where 1 mole of HX reacts with 1 mole of NaOH

To solve this question we need to find the moles of NaOH at equivalence point (Were moles HX = Moles NaOH).

18.50mL = 0.01850L * (0.20mol / L) = 0.00370 moles NaOH = Moles HX

In 20.0mL = 0.0200L =

0.00370 moles HX / 0.0200L = 0.185M HX

The equilibrium of HX is:

HX(aq) ⇄ H⁺(aq) + X⁻(aq)

And Ka is defined as:

Ka = [H⁺] [X⁻] / [HX]

Where [H⁺] = [X⁻] because comes from the same equilibrium

As pH = 2.87, [H+] = 10^-pH = 1.349x10⁻³M

Replacing:

Ka = [H⁺] [H⁺] / [HX]

Ka = [1.349x10⁻³M]² / [0.185M]

Ka = 9.836x10⁻⁶

pKa = -log Ka

Answer:

it would be option C

Explanation:

Speed of light = 3×10^8m/s

Planck's constant = 6.626×10^-34 Js

Wavelength = 8 x 10^-9 m

Energy = [(3×10^8) * (6.626×10^-34)] / 8 x 10^-9

Energy = [19.878×10^(8-34)] / 8 x 10^-9

Energy = 2.48475 × 10^(-26+9)

Energy = 2.48×10^-17 J

Answer:

For each system listed in first column of the table below, decide (if possible) whether the change described in the second column will increase the entropy S of the system, decrease S , or leave S unchanged. If you don?t have enough information to decide, check the not enough information button in the last column

Answer:

please also share the excerpt

Explanation:

Thank you

Answer:

1.5x10²² particulates

Explanation:

Assuming ideal behaviour, we can solve this problem by using the PV=nRT formula, where:

We input the given data:

And solve for n:

Finally we calculate how many particulates are there in 0.025 moles, using Avogadro's number:

Answer: el texto no es tan claro

Answer:

The structures of all isomeric alcohols of molecular formula C5H12O along with their IUPAC names are as shown.

Their classification of primary, secondary, and tertiary alcohols are -

1-pentanol -

2-pentanol -

3-pentanol

2-methylbutan-1-ol

2-methylbutan-2-ol

3-methylbutan-2-ol

3-methylbutan-1-ol

2,2-dimethylpropanol

Answer:

the representative elements are elements where the the s and p orbitals are filling. The transition elements are elements where the d orbitals (groups 3-11 on the periodic table) are filling, and the inner transition metals are the elements where the f orbitals are filling.

Explanation:

=)

Answer:

3.6124 m/kg

Explanation:

Molality is calculated as moles of solute (mol) divided by kilogram of solvent (kg). Here, we can find these numbers by using the 35.4%, which gives us  35.4 g of H3PO4 and 100 g of solution to work with.

To go from grams to moles for the phosphoric acid, you need to find the molar mass of the compound or element and divide the grams of the compound or element by that molar mass.

Here, the molar mass for phosphoric acid is 97.9952 g/mol. The equation would look like this:

35.4 g x 1 mol / 97.9952 g = 0.3612422 mol

Next, the 100 g of solvent can easily be converted to 0.1 kg of solvent.

To find the molality, divide the moles of solute and kilograms of solution.

0.3612422 mol / 0.1 kg = 3.6124 m/kg

Answer:

2.35 × 10²² particles

Explanation:

To get the number of particles in a substance, we multiply the number of moles (n) of that substance by Avogadro's number (nA).

That is, we say;

number of atoms = n × 6.02 × 10²³

In this question, Neon gas is said to have 0.0391 moles. The number of atoms in that field.

number of particles = 0.0391 × 6.02 × 10²³

number of particles = 0.235 × 10²³

number of particles = 2.35 × 10²² particles

Answer:

skeletal system

Explanation:

to create and fliter blood and provide frame-work to the human body and support

Copper has a density of 8950 kg/m3 = 8.95 kg/dm3 = 8.95 g/cm3. Water has a density of 1000 kg/m3 = 1000 g/L = 1 kg/dm3 = 1 kg/L = 1 g/cm3 = 1 g/mL.

HOPE IT HELPS❤️

Answer:

The empirical formula is, C4H4S

Explanation:

Number of moles of carbon = 1.119 g/ 44g/mol = 0.025 moles

Mass of Carbon= 0.025 moles × 12 g/ mole = 0.3 g

Number of moles of hydrogen = 0.229/18g/mol × 2 = 0.025 moles

Mass of hydrogen = 0.025 moles × 1 = 0.025 g

Number of moles of sulphur = 0.407g/ 64 g/mol = 0.0064 moles

Mass of sulphur= 0.0064 moles ×32 = 0.2 g

Now we obtain the mole ratios by dividing through by the lowest ratio.

C- 0.025 moles/ 0.0064 moles, H- 0.025 moles/ 0.0064 moles, S- 0.0064 moles/0.0064 moles

C4H4S

Answer: The excess weight of the luggage is 15.5 kg and its percentage is 77.5%

Explanation:

Given values:

Maximum amount of luggage allowed = 20 kg

Amount of luggage man is carrying = [3.5 + 15 + 2 + 15] kg = 35.5 kg

Excessive weight of the luggage carried = Amount of luggage carrying - Maximum amount of luggage allowed

Excessive weight of the luggage carried = [35.5 - 20] = 15.5 kg

To calculate the percentage of excess weight, we use the equation:

[tex]\% \text{excess weight}=\frac{\text{Excess weight carried}}{\text{Maximum allowed}}\times 100[/tex]

Putting values in above equation, we get:

[tex]\% \text{excess weight}=\frac{15.5kg}{20kg}\times 100\\\\\% \text{excess weight}=77.5%[/tex]

Hence, the excess weight of the luggage is 15.5 kg and its percentage is 77.5%

Answer:

154 g

Explanation:

Step 1: Write the balanced decomposition equation

2 NaN₃(s) ⇒ 2 Na(s) + 3 N₂(g)

Step 2: Calculate the moles corresponding to 79.5 L of N₂ at STP

At STP, 1 mole of N₂ occupies 22.4 L.

79.5 L × 1 mol/22.4 L = 3.55 mol

Step 3: Calculate the number of moles of NaN₃ needed to form 3.55 moles of N₂

The molar ratio of NaN₃ to N₂ is 2:3. The moles of NaN₃ needed are 2/3 × 3.55 mol = 2.37 mol.

Step 4: Calculate the mass corresponding to 2.37 moles of NaN₃

The molar mass of NaN₃ is 65.01 g/mol.

2.37 mol × 65.01 g/mol = 154 g

Answer:

0.8853 mL

Explanation:

First we convert 13 lb to kg, keeping in mind that 1 lb = 0.454 kg:

Then we calculate how many mg of acetaminophen should be given, using the recommended dose and infant mass:

Finally we calculate the required mL of suspension, using its concentration:

Answer:

D

Explanation:

thermal energy must be transferred from the ice to it's surroundings

Thermal energy is the heat and energy present in the system. The thermal energy must be dissipated from ice to the surroundings to melt and produce liquid. Thus, option D is correct.

Thermal energy is present in any substance in the form of energy and heat that depends on kinetic energy, orderliness, randomness, temperature, etc. It is passed from a substance to the surrounding at a lesser temperature.

The ice can melt into a liquid when it loses its thermal energy and heat to the surrounding with increased kinetic energy and releases the temperature to the area with a temperature less than the ice.

Therefore, the heat from ice will get dissipated to the outer environment to melt.

Learn more about thermal energy here:

https://brainly.com/question/11278589

#SPJ5

Answer:

The majority of the molecules move from higher to lower concentration, although there will be some that move from low to high. The overall (or net) movement is thus from high to low concentration.

hope this helps!<3

Answer:

Explanation: hell noo

Answer:

1. B

2.B

3.B

4.C

5.C

Explanation:

I hope this help you

Answer:

Cu

Explanation:

Groups 3 - 12 (or groups IIA - IIB) of the periodic table contain transition elements. Transaction elements start from period four (4) of the periodic table. The phrase alludes to the fact that the d sublevel is filling at a lower main energy level than the s sublevel that came before it.

The transition elements' arrangement is inverted from the fill order, with the 4 s filled prior to the actual 3 d begins. The transition elements are commonly referred to as transition metals since they are all metals. They are less reactive than the metals in Groups 1 and 2 and have normal metallic characteristics.

From the options given Cu is the only transition metal in the fourth period on the periodic table.

Answer:

40.0L of SO2 are produced

Explanation:

To solve this question we need to find the moles of O2 using PV = nRT in order to find the moles. Thus, we can find the limiting reactant and the moles (And volume) of SO2 produced as follows:

Moles O2:

n = PV/RT

n = 1.20atm*55.0L / 0.082atmL/molK*358K

n = 2.25 moles of O2.

Clearly, limiting reactant is O2.

The moles of SO2 produced are:

2.25 moles of O2 * (8mol SO2 / 11mol O2) = 1.6351 moles SO2

Volume SO2:

V = nRT/P

V = 1.6351 moles SO2*0.082atmL/molK*358K / 1.20atm

V = 40.0L of SO2 are produced

Answer:

B. The movement of weathered materials by wind, water or ice.