Answer:
0.00091
Explanation:
(9x10^9) (2.6x10^-6) (1.4x10^-6) / 36
(9,000,000,000) (0.0000026) (0.0000014) /36
|
23,400(0.0000014) /36
|
0.03276 /36
|
0.00091
Which is the correct representation of the right-hand rule for a current flowing to the right?
Answer:
The third image
Explanation:
The one with the thumb pointing to the right
Answer:
3, correct on Edge 2020
What do you think will be different about cars in the future? Describe a change that is already being developed or that you think should be invented.
Answer:
Flying cars.
Explanation:
Electric fields are MOST associated with ________.
Einstein developed much of his understanding of relativity through the use of gedanken, or thought, experiments. In a gedanken experiment, Einstein would imagine an experiment that could not be performed because of technological limitations, and so he would perform the experiment in his head. By analyzing the results of these experiments, he was led to a deeper understanding of his theory. In each the following gedanken experiments, Albert is in the exact center of a glass-sided freight car speeding to the right at a very high speed vvv relative to you. Albert has a flashlight in each hand and directs them at the front and rear ends of the freight car. Albert switches the flashlights on at the same time.
In Albert's frame of reference, which beam of light travels at a greater speed, the one directed toward the front or the one toward the rear of the train, or do they travel at the same speed? Which beam travels faster in your frame of reference? Enter the answers for Albert's frame of reference and your frame of reference separated by a comma using the terms front, rear, and same. For example, if in Albert's frame of reference the beam of light directed toward the front of the train travels at a greater speed and in your frame of reference the two beams travel at the same speed, then enter front,same.
Answer:
For eintein's frame of reference, both beam travel at the same speed.
For my own frame of reference, both beams travel at the same speed.
Explanation:
According to special relativity, the speed of light is the same in all direction on all reference frame. If not for this law we will assume the from beam will have a relative speed that will be the speed of light plus the speed of the fright car. This is not so and it violates the speed limit of light which according to the first law is the highest speed possible and nothing can go beyond that.
Three packing crates of masses, M1 = 6 kg, M2 = 2 kg
and M3 = 8 kg are connected by a light string of
negligible mass that passes over the pulley as shown.
Masses M1 and M3 lies on a 30o
incline plane which
slides down the plane. The coefficient of kinetic friction
on the incline plane is 0.28.
Determine the acceleration of the system.
Answer:
a = 2.5 m / s²
Explanation:
This is an exercise of Newton's second law, in this case we fix a coordinate system with the x axis parallel to the plane with positive direction
Let's write the second law for bodies in the inclined plane
W₁ₓ + W₃ₓ - fr = (m₁ + m₃) a
N₁ - [tex]W_{1y}[/tex] + N₃- W_{3y} = 0
N₁ + N₃ = W_{1y} + W_{3y}
let's use trigonometry to find the weight components
sin 30 = Wₓ/ W
Wₓ = W sin 30
cos 30 = W_{y} / W
W_{y} = W cos 30
we substitute
N₁+ N₃ = W₁ cos 30 + W₃ cos 30
W₁ₓ + W₃ₓ - μ (m₁ + m₃) g cos30 = (m₁ + m₃) a
a = (m₁g sin 30 + m₃g sin 30 - μ (m₁ + m₃) g cos 30) / (m₁ + m₃)
a = g sin 30 - μ g cos30
let's calculate
a = 9.8 sin 30 - 0.28 9.8 cos 30
a = 4.9 - 2,376
a = 2.5 m / s²
What types of mediums are involved in the energy transfer
Answer:
In electromagnetic waves, energy is transferred through vibrations of electric and magnetic fields. In sound waves, energy is transferred through vibration of air particles or particles of a solid through which the sound travels. In water waves, energy is transferred through the vibration of the water particles.
A radiator rests snugly on the floor of a room when the temperature is 10 oC. The radiator is connected to the furnace in the basement by a pipe that is 15 m long. How far off the floor will the radiator be lifted when it is filled with steam at 102 oC? The iron expands 1.0 * 10-5 / oC.
A long solid conducting cylinder with radius a = 12 cm carries current I1 = 5 A going into the page. This current is distributed uniformly over the cross section of the cylinder. A cylindrical shell with radius b = 21 cm is concentric with the solid cylinder and carries a current I2 = 3 A coming out of the page. 1)Calculate the y component of the magnetic field By at point P, which lies on the x axis a distance r = 41 cm from the center of the cylinders.
Answer:
Explanation:
We shall use Ampere's circuital law to find magnetic field at required point.
The point is outside the circumference of two given wires so whole current will be accounted for .
Ampere's circuital law
B = ∫ Bdl = μ₀ I
line integral will be over circular path of radius r = 41 cm .
Total current I = 5A -3A = 2A .
∫ Bdl = μ₀ I
2π r B = μ₀ I
2π x .41 B = 4π x 10⁻⁷ x 2
B = 2 x 10⁻⁷ x 2 / .41
= 9.75 x 10⁻⁷ T . It will be along - ve Y - direction.
You could use an analytical or triple beam balance to determine a ___ called ____
A)
physical property; mass.
B)
chemical property, mass.
C)
physical property; weight.
D)
physical property; density.
Answer:
a and b are the correct answers
Explanation:
Answer:
A) physical property; mass.
Explanation:
took the test
A piston with stops containing water goes through an expansion process through the addition of heat. State 1 the pressure is 200 kPa and the volume is 2 m3. After half of the heat has been delivered the piston hits the stops corresponding to a volume of 5 m3. After all the heat has been delivered, state 2, the pressure is 1000 kPa with the piston resting on the stops. What is the work?
Answer:
The work will be "600 kJ/kg".
Explanation:
(1-a) ⇒ Constant Pressure
(a-2) ⇒ Constant Volume
The given values are:
In state 1,
Pressure, P₁ = 200 kPa
Volume, V₁ = 2m³
In state 2,
Pressure, P₂ = 1000 kPa
Volume, V₁ = 5m³
Now,
In process (1-a), work will be:
⇒ W₁₋ₐ = P₁(Vₐ - V₁)
On putting the values, we get
⇒ W₁₋ₐ = 200(5-2)
⇒ = 200(3)
⇒ = 600 kJ/kg
In process (a-2), work will be:
⇒ Wₐ₋₂ = 0
∴ (The change in the volume will be zero.)
So,
⇒ Total work = (W₁₋ₐ) + (Wₐ₋₂)
⇒ = 600 + 0
⇒ = 600 kJ/kg
A student performs an experiment that involves the motion of a pendulum. The student attaches one end of a string to an object of mass M and secures the other end of the string so that the object is at rest as it hangs from the string. When the student raises the object to a height above its lowest point and releases it from rest, the object undergoes simple harmonic motion. As the student collects data about the time it takes for the pendulum to undergo one oscillation, the student observes that the time for one swing significantly changes after each oscillation. The student wants to conduct the experiment a second time. Which two of the following procedures should the student consider when conducting the second experiment?
a) Make sure that the length of the string is not too long.
b) Make sure that the mass of the pendulum is not too large.
c) Make sure that the difference in height between the pendulum's release position and rest position is not too large.
d) Make sure that the experiment is conducted in an environment that has minimal wind resistance.
Answer:
the answers the correct one is cη
Explanation:
In this simple pendulum experiment the student observes a significant change in time between each period. This occurs since an approximation used is that the sine of the angle is small, so
sin θ = θ
with this approach the equation will be surveyed
d² θ / dt² = - g / L sin θ
It is reduced to
d² θ / dt² = - g / L θ
in which the time for each oscillation is constant, for this approximation the angle must be less than 10º so that the difference between the sine and the angles is less than 1%
The angle is related to the height of the pendulum
sin θ = h / L
h = L sin θ.
Therefore the student must be careful that the height is small.
When reviewing the answers the correct one is cη
Considering the approximation of simple harmonic motion, the correct option is:
(c) Make sure that the difference in height between the pendulum's release position and rest position is not too large.
Simple Harmonic MotionAccording to Newton's second law in case of rotational motion, we have;
[tex]\tau = I \alpha[/tex]
Applying this, in the case of a simple pendulum, we get;
[tex]-mg\,sin\,\theta =mL^2 \,\frac{d^2 \theta}{dt^2}[/tex]
On, rearranging the above equation, we get;
[tex]mL^2 \,\frac{d^2 \theta}{dt^2} + mg\,sin\,\theta=0\\\\\implies \frac{d^2 \theta}{dt^2} +\frac{g}{L} sin \,\theta=0[/tex]
Now, if angular displacement is very small, i.e.; the bob of the pendulum is only raised slightly.
Then, [tex]sin\, \theta \approx \theta[/tex]
[tex]\implies \frac{d^2 \theta}{dt^2} +\frac{g}{L} \,\theta=0[/tex]
This is now in the form of the equation of a simple harmonic motion.
[tex]\frac{d^2 \theta}{dt^2} +\omega^2 \,\theta=0[/tex]
Comparing both these equations, we can say that;
[tex]\omega = \sqrt{\frac{g}{L}}[/tex]
[tex]T=2\pi\sqrt{\frac{L}{g}}[/tex]
This relation for the time period can only be obtained if the angular displacement is very less.
So, the correct option is;
Option (c): Make sure that the difference in height between the pendulum's release position and rest position is not too large.
Learn more about simple harmonic motion here:
https://brainly.com/question/26114128
Yellow light with wavelength 600 nm is travelling to the left (in the negative x direction) in vacuum. The light is polarized along the z direction. (a) Draw a neat snapshot mode labeled vector picture of the wave. (b) Draw a neat movie mode labeled vector picture of the wave. (c) If the wave were to represent blue light instead of yellow light, how would your pictures in parts a and b change? If there is no change, say so explicitly.
Answer: (a) and (b) => check attached file.
(c). Picture (a) and (b) will both remain the same.
Explanation:
IMPORTANT: The solution to the question (a) and (b) that is (a) Draw a neat snapshot mode labeled vector picture of the wave. (b) Draw a neat movie mode labeled vector picture of the wave is there in the ATTACHED FILE/PICTURE.
It is also worthy of note to know that in anything Electromagnetic wave, the magnetic field, the Electric Field and their direction of propagation are perpendicular to each other.
Therefore, knowing the fact above we can say that in yellow light, the magnetic field is in the y-direction and the Electric Field is in the z-direction.
Hence, the solution to option C is given below;
(C).If the wave were to represent blue light instead of yellow light, picture (a) will remain the same because both light are Electromagnetic wave, although the wavelength will have to change. Picture (b) will also remain the same because they are both Electromagnetic waves and possess similar properties.
Forests have been completely wiped out in some parts the world. In areas that are economically depressed, people use the cut wood to fuel fires for cooking and for making shelters or homes. How would deforestation most likely impact Earth's biogeochemical cycles?
Group of answer choices
Less carbon dioxide will be present in the atmosphere because the people living in the area still breath in oxygen.
An increase in carbon dioxide will occur in the atmosphere because there are less trees to use the gas in the process of photosynthesis.
Carbon dioxide levels will not change, since plants do not have a role in the carbon cycle.
More water will be released into the atmosphere because transpiration and condensation will produce more precipitation.
Answer: An increase in carbon dioxide will occur in the atmosphere because there are less trees to use the gas in the process of photosynthesis.
Explanation: Photosynthesis can be simply defined as a process where green plants uses minerals from the soil, water and carbon dioxide to produce their own food (energy-rich organic compound/starch) while oxygen is released into the environment.
On the other hand, Human beings and other animals inhales the oxygen released into the environment by green plants and breath out carbon dioxide.
Deforestation is the permanent removal trees either for commercial or household use or in some cases, to make room or space for other activities or development.
Now when these trees (green plants) are permanently cut down without replacement, humans and other animals continuously exhale carbon dioxide and there will be little or no green plants (trees) available to convert this carbon dioxide into oxygen.
Hence, there will be an increased amount of carbon dioxide in the atmosphere as their are little or no tress to use the gas (carbon dioxide) in the process of photosynthesis.
A 20-kilogram box is sitting on an inclined plane with a 30-degree slope. If the box is at rest, what is the force
on the box due to friction?
Answer:
Explanation:
The box is at rest because , the component of weight along the surface downwards is equal to frictional force .
frictional force = mgsinθ
= 20 x 9.8 sin 30
= 98 N .
Gerry is looking at salt under a powerful microscope and notices a crystalline structure. What can be known about the salt sample that Gerry is looking at?
1. The atoms have spread out from each other.
2.The atoms are sliding past each other.
3.The atoms have no particular pattern
4.The atoms are vibrating in place
Answer:
4.The atoms are vibrating in place
Explanation:
The answer is; The atoms are vibrating in place
We know that, molecules in the crystal have a definite position in the crystal and are bonded to each other by electrostatic forces. However, since the molecules have some energy, they vibrate in their positions. Their energy, however, is not high enough to cause them to overcome the strong bonding (unless the crystal is heated or the atoms are irradiated).
10) Two students want to use a 12-meter long rope to create standing waves. They first measure the speed at which a single wave pulse moves from one end of the rope to another and find that it is 36 m/s. What frequency must they vibrate the rope at to create the second harmonic
Answer:
To create a second harmonic the rope must vibrate at the frequency of 3 Hz
Explanation:
First we find the fundamental frequency of the rope. The fundamental frequency is the frequency of the rope when it vibrates in only 1 loop. Therefore,
f₁ = v/2L
where,
v = speed of wave = 36 m/s
L = Length of rope = 12 m
f₁ = fundamental frequency
Therefore,
f₁ = (36 m/s)/2(12 m)
f₁ = 1.5 Hz
Now the frequency of nth harmonic is given in general, as:
fn = nf₁
where,
fn = frequency of nth harmonic
n = No. of Harmonic = 2
f₁ = fundamental frequency = 1.5 Hz
Therefore,
f₂ = (2)(1.5 Hz)
f₂ = 3 Hz
A steam engine takes in superheated steam at 270 °C and discharges condensed steam from its cylinder at 50 °C. The engine has an efficiency of 30%, and taken in 50 kJ from the hot steam per cycle. If a Carnot engine takes in the same amount of heat per cycle and operates at these temperatures, the work it can turn into is most likely to be:a) 15 kJ. b) 20 kJ. c) 10 kJ. d) 50 kJ.
Answer:
b) 20 kJ
Explanation:
Efficiency of carnot engine = (T₁ - T₂ ) / T₁ Where T₁ is temperature of hot source and T₂ is temperature of sink .
T₁ = 270 + 273 = 543K
T₂ = 50 + 273 = 323 K
Putting the given values of temperatures
efficiency = (543 - 323) / 543
= .405
heat input = 50 KJ
efficiency = output work / input heat energy
.405 = output work / 50
output work = 20.25 KJ.
= 20 KJ .
5.00 kg of liquid water is heated to 100.0 °C in a closed system. At this temperature, the density of liquid water is 958 kg/m3 . The pressure is maintained at atmospheric pressure of 1.01 x 105 Pa. A moveable piston of negligible weight rests on the surface of the water. The water is then converted to steam by adding an additional amount of heat to the system. When all of the water is converted, the final volume of the steam is 8.50 m3 . The latent heat of vaporization of water is 2.26 x 106 J/kg. Calculate how much work is done and the change in the internal energy during this isothermal process.
Answer:
1.04 x 107 J.
Explanation:
We can use the following method to do the calculation
Total energy given to water to convert intosteam
dQ = m* l
dQ = 5.00* 2.26 * 106
= 1.13* 107 J
Work done at constantpressure dW = P* dV
Initialvolume V1 = 5.00kg / 958
= 5.22* 10-3 m3
Finalvolume = 8.50 m3
=> dW = 1.01* 105 * ( 8.50 - 5.22 * 10-3)
= 8.58* 105 J
First law of thermodynamicsis dQ = ΔU + dW
Change in internalenergy ΔU = 1.13* 107 - 8.58 *105
= 1.04 x 107 J as our answer
A 1600 kg sedan goes through a wide intersection traveling from north to south when it is hit by a 2300 kg SUV traveling from east to west. The two cars become enmeshed due to the impact and slide as one thereafter. On-the-scene measurements show that the coefficient of kinetic friction between the tires of these cars and the pavement is 0.75, and the cars slide to a halt at a point 5.54 m west and 6.19 m south of the impact point. How fast was sedan traveling just before the collision? How fast was SUV traveling just before the collision?
Answer:
Explanation:
momentum of sedan of 1600 kg = 1600x v , where v is its velocity
momentum of suv of 2300 kg = 2300 x u where u is its velocity .
force of friction = ( 1600 + 2300 ) x 9.8 x .75 ( fiction = μ mg )
= 28665 N
distance by which friction acted = √ (5.54² + 6.19²)
= 8.3 m
work done by friction
= 28665 x 8.3
= 237919.5 J
Total kinetic energy of cars = work done by friction
1/2 x 1600 x v² + 1/2 x 2300 u² = 237919.5
16 v² + 23 u² = 4758.4
1600 x v / 2300 u = 6.19 / 5.54
v / u = 1.6
v = 1.6 u
putting this equation in fist equation
40.96 u² + 23 u² = 4758.4
= 63.96 u² = 4758.4
u² = 74.4
u = 8.62 m /s
v = 13.8 m /s
A solid cylinder of mass m and radius R rolls down a ramp, starting from rest at a height h above a nearby horizontal surface. The coefficients of kinetic and static friction and are non-zero, and sufficiently large that the cylinder rolls down the ramp without slipping. Assume that the coefficient of rolling friction is zero. As the cylinder leaves the ramp, it continues along a horizontal surface (with the same frictional coefficients as the ramp).
Required:
What is the speed V of the cylinder after it has traveled a distance D along the horizontal surface?
Answer:
the volocity is 50
Explanation:
A ball with a mass of 4 kg is initially traveling at 2 m/s and has a 5 N force applied for 3 s. What is the initial momentum of the ball?
Answer:
The initial momentum of the ball is 8 kg-m/s.
Explanation:
Given that,
Mass of the ball is 4 kg
Initial speed of the ball is 2 m/s
Force applied to the ball is 5 N for 3 seconds
It is required to find the initial momentum of the ball. Initial momentum means that the product of mass and initial velocity of the ball. It is given as :
[tex]p_i=mu\\\\p_i=4\ kg\times 2\ m/s\\\\p_i=8\ kg-m/s[/tex]
So, the initial momentum of the ball is 8 kg-m/s.
Help ill give you brainliest !!!
Answer:
1. B
2. A
3. C
4. B
5. A
6. Muscular strength is different than muscular endurance because of the fact that muscular strength is the amount of force that can be exerted in one instance. Muscular endurance is how long that you can exert that force without being completely exhausted.
7. Some benefits to strength training is the increase in muscular endurance. There is also the benefit of better muscular strength.
Explanation:
By which process does the heat from the Sun reach the Earth? (AKS 4b DOK 1) *
How are the elements in the same row similar
Answer:
All elements in a row have the same number of electron shells. Each next element in a period has one more proton and is less metallic than its predecessor. Arranged this way, groups of elements in the same column have similar chemical and physical properties, reflecting the periodic law.
Which of the following actions would decrease the energy stored in a parallel plate capacitor when a constant potential difference is applied across the plates? (Choose from: Increasing the area of the plates; Decreasing the area of the plates; Increasing the separation between the plates; Decreasing the separation between the plates; Inserting a material with a higher dielectric constant between the plates
Answer:
increasing the separation between the plates
Explanation:
The increase in the vacuum/separation between the plates in a parallel plate capacitor connected to a constant potential difference decreases the energy stored in the capacitor. the increase in the separation of the plates of a parallel plate capacitor reduces the capacitance of the capacitor because
Q(charge) = CV V = VOLTAGE , c = capacitance
E = 1/2 eAV^2/ D ( ENERGY STORED )
where D = distance between plates, e = dielectric, A = area of capacitor , V = potential difference
A"boat"is"moving"to"the"right"at"5"m/s"with"respect"to"the"water."A"wave"moving"to"the"left,"opposite"the"motion"of"the"boat."The"waves"have"2.0"m"between"the"top"of"the"crests"and"the"bottom"of"the"troughs."The"period"of"the"wave"is"8.3"s"and"their"wavelength"is"110"m."At"one"instant"the"boat"sits"on"a"crest"of"the"wave,"20"seconds"later,"what"is"the"vertical"displacement"of"the"boat
Answer:
0.99m
Explanation:
Firs you calculate the relative velocity between the boat and the wave. The velocity of the boat is 5m/s and the velocity of the wave is given by:
[tex]v=\lambda f=\lambda\frac{1}{T}=(110m)\frac{1}{8.3s}=13.25\frac{m}{s}[/tex]
the relative velocity is:
[tex]v'=13.25m/s-5m/s=8.25\frac{m}{s}[/tex]
This velocity is used to know which is the distance traveled by the boat after 20 seconds:
[tex]x'=v't=(8.25m/s)(20s)=165m[/tex]
Next, you use the general for of a wave:
[tex]f(x,t)=Acos(kx-\omega t)=Acos(\frac{2\pi}{\lambda}x-\omega t)[/tex]
you take the amplitude as 2.0/2 = 1.0m.
[tex]\omega=\frac{2\pi}{T}=\frac{2\pi}{8.3s}=0.75\frac{rad}{s}[/tex]
by replacing the values of the parameters in f(x,t) you obtain the vertical displacement of the boat:
[tex]f(165,20)=1.0m\ cos(\frac{2\pi}{110m}(165)-(0.75\frac{rad}{s})(20s))\\\\f(165,20)=0.99m[/tex]
To understand thermal linear expansion in solid materials. Most materials expand when their temperatures increase. Such thermal expansion, which is explained by the increase in the average distance between the constituent molecules, plays an important role in engineering. In fact, as the temperature increases or decreases, the changes in the dimensions of various parts of bridges, machines, etc., may be significant enough to cause trouble if not taken into account. That is why power lines are always sagging and parts of metal bridges fit loosely together, allowing for some movement. It turns out that for relatively small changes in temperature, the linear dimensions change in direct proportion to the temperature.
For instance, if a rod has length L0 at a certain temperature T0 and length L at a higher temperature T, then the change in length of the rod is proportional to the change in temperature and to the initial length of the rod: L - L0 = αL0(T - T0),
or
ΔL = αL0ΔT.
Here, α is a constant called the coefficient of linear expansion; its value depends on the material. A large value of α means that the material expands substantially as the temperature increases; smaller values of α indicate that the material tends to retain its dimensions. For instance, quartz does not expand much; aluminum expands a lot. The value of α for aluminum is about 60 times that of quartz!
Questions:
A) Compared to its length in the spring, by what amount ΔLwinter does the length of the bridge decrease during the Teharian winter when the temperature hovers around -150°C?
B) Compared to its length in the spring, by what amount ΔLsummer does the length of the bridge increase during the Teharian summer when the temperature hovers around 700°C?
Answer:
Check the explanation
Explanation:
Kindly check the attached image below to see the step by step explanation to the question above.
A 200.0 g block rests on a frictionless, horizontal surface. It is pressed against a horizontal spring with spring constant 4500.0 N/m (assume that the spring is massless). The block is held in position such that the spring is compressed 4.00 cm shorter than its undisturbed length. The block is suddenly released and allowed to slide away on the frictionless surface. Find the speed the block will be traveling when it leaves the spring.
Answer:
6 m/s
Explanation:
Given that :
mass of the block m = 200.0 g = 200 × 10⁻³ kg
the horizontal spring constant k = 4500.0 N/m
position of the block (distance x) = 4.00 cm = 0.04 m
To determine the speed the block will be traveling when it leaves the spring; we applying the work done on the spring as it is stretched (or compressed) with the kinetic energy.
i.e [tex]\frac{1}{2} kx^2 = \frac{1}{2} mv^2[/tex]
[tex]kx^2 = mv^2[/tex]
[tex]4500* 0.04^2 = 200*10^{-3} *v^2[/tex]
[tex]7.2 =200*10^{-3}*v^{2}[/tex]
[tex]v^{2} =\frac{7.2}{200*10^{-3}}[/tex]
[tex]v =\sqrt{\frac{7.2}{200*10^{-3}}}[/tex]
v = 6 m/s
Hence,the speed the block will be traveling when it leaves the spring is 6 m/s
A mutation causes a dog to be born with a tail that is shorter than normal.
Which best describes this mutation?
Answer:
A mutation causes a dog to be born with a tail that is shorter than normal. Which best describes this mutation? It is harmful because it obviously affects the dog’s survival. It is harmful because it affects the dog’s physical appearance. It is neutral because it does not obviously affect the dog’s survival. It is beneficial because it affects the dog’s physical appearance.
Explanation:
Answer:
C
Explanation:
:)))
the speed of sound is 343m/s. dezeirey is positioned 5m behind her. how many seconds will it take for the echo from the wall to reach her
Answer:
t = 0.029 s
Explanation:
We have,
Speed of sound is 343 m/s.
Dezeirey is positioned 5 m behind her.
It is required to find the time taken for the echo from the wall to reach her. The total distance covered by the echo when it reaches her is 2d or 10 m.
Time taken,
[tex]t=\dfrac{d}{v}\\\\t=\dfrac{10\ m}{343\ m/s}\\\\t=0.029\ s[/tex]
So, it will take 0.029 seconds for the echo from the wall to reach her.
