what happens to the displacement vector when the spring constant has a higher value and the applied force remains constant? It remains the same it increases magnitude it changes direction it decreases magnitude

Answer:

C. 1.50×10¹¹ m

Explanation:

First, convert the time to seconds.

8 min × (60 s/min) + 20 s = 500 s

Distance = speed × time

d = (3×10⁸ m/s) (500 s)

d = 1.50×10¹¹ m

The distance from the Sun to the Earth is 1.50 × 10¹¹. Speed is the distance travelled by an object in a particular time period. Thus, the correct option is C.

The speed of light in vacuum is commonly denoted by c. It is a universal physical constant. The speed of light (c) is exactly equal to 3.00 x 10⁸m/s (meter per second).

The speed of an object is the rate of change of position with respect to time. It is also defined as the distance covered by an object with respect to time. It can be calculated by dividing the distance travelled by an object by the time taken. It is a scalar quantity as it has only magnitude and no direction.

Speed = Distance / time

Distance = Speed × Time

Distance = 3.00 × 10⁸ × 500

Distance = 1500 × 10⁸

Distance =  1.50 × 10¹¹

Therefore, the correct option is C.

Learn more about Speed of light here:

https://brainly.com/question/394103

#SPJ2

Answer:

PFA

:-)

Explanation:

Answer:

Explanation:

frequency  of first body   f₁  = 2 / T  where T is time taken by it for making two orbits

frequency of second body   f₂  = 3 / T

ration of two frequency

f₁ / f₂ = 2 / 3

This ratio is called perfect fifth in musical interval .

Explanation:

We hammer the broader side of a nail instead of its sharp end to put it in wood. It is a concept based on the pressure exerted.

The force acting per unit area of an object is called pressure exerted. It means that pressure is inversely proportional to the area of cross section i.e. area increases, pressure decreases and vice versa.

The broader side of a nail has more area as compared to the sharp end. It means that the broader side will exert less pressure on them which make it easier for us to fix it into the wood.

Answer:

40085 Hz

Explanation:

We are given; Sound frequency emmision of bat;f = 38.9 kHz = 38900 Hz

Bat is moving at 0.015 times the speed of sound in air.

Speed of sound in air = 343 m/s

The formula for waves reflected off the wall is calculated from Doppler equation as:

f' = f(v + v_d)/(v - v_s)

Where;

f is the frequency = 38900 Hz

f' is the detected frequency,

v_d is the velocity of the detector = 0.015 × 343 = 5.145

v_s is the velocity of the source = 0.015 × 343 = 5.145 m/s

v is the velocity of the sound = 343 m/s

Thus;

f' = 38900(343 + 5.145)/(343 - 5.145)

f' ≈ 40085 Hz

Answer:

Kelvin

Explanation:

The SI unit to use in measuring the temperature of hot liquid is kelvin (K)

Answer:

6097 = x

Explanation:

x = VT + at²/2

x= 2.7 * 35 + 9.8 * (35)²/2

x=6097

Answer:

The correct answers are 2, 4

Explanation:

The dispersion of light occurs due to the interaction of electromagnetic radiation with matter, let's analyze the phenomenon, when a ray of light reaches a particle is absorbed and subsequently re-emitted in all directions, for radiation of lower wavelength (higher frequency ) the highest absorptions and therefore the missionary also the highest; An example of this is the blue light from the atmosphere, which is the absorption of blue light and its subsequent re-emission

Based on this explanation, the dispersion in gas particles or molecules is proportional to the frequency of the light (inversely proportional to the wavelength) and is also proportional to the number of dispersing particles in the air, that is, to the total volume of the particles. dispersers.

The correct answers are 2 and 4

Answer:

The angular acceleration is 3.33 rad/s²

Explanation:

Here is the preceding problem as well as the given problem:

A boy rides his bicycle 2.00 km. The wheels have radius 30.0 cm. What is the total angle the tires rotate through during his trip?

21.

If the boy on the bicycle in the preceding problem accelerates from rest to a speed of 10.0 m/s in 10.0 s, what is the angular acceleration of the tires?

Explanation:

From one of the equations of kinematics for linear motion

v = u + at

Where v is the final speed

u is the initial speed

a is the linear acceleration

and t is time

From the question,  the boy starts from rest, hence,

u = 0.0 m/s

v = 10.0 m/s

t = 10.0 s

a = ??

From, v = u + at

a = [tex]\frac{ v - u}{t}[/tex]

a = [tex]\frac{10 - 0}{10}[/tex]

a = 1 m/s²

Now, for the angular acceleration, [tex]\alpha[/tex]

The relationship between linear acceleration, a and angular acceleration, [tex]\alpha[/tex] is

a = [tex]\alpha[/tex]r

where r is radius

From the previous question, r = 30.0cm = 0.3m

From the equation, a = [tex]\alpha[/tex]r

[tex]\alpha[/tex] = a / r

[tex]\alpha[/tex] = 1 / 0.3

[tex]\alpha[/tex] = 3.33 rad/s²

Answer: B. 16

Explanation:

The given table:

x y

2.5 6.25

9.4 88.36

15.6 243.63

19.5 380.25

25.8 665.64

Here, we observed that value of y is the square value of x.

i.e. [tex]y=x^2[/tex]  [For example 2.5²=6.25, 9.4²=88.36, 15.6²=243.63]

Put x=4, we get

[tex]y=4^2=16[/tex]

Hence, the approximate value of y for x = 4 is 16.

So, the correct option is B. 16 .

Answer:

The answer is A.

Explanation:

your answer is...

C. potassium

Answer:

I assume its c. Since its talking about testing.

Explanation:

Answer:

The answer is test of durability

Explanation:

Answer:

HELLO BELOW IS THE ATTACHED DIAGRAM USED TO ANSWER YOUR QUESTION AS IT WAS MISSING

A) 1270⁰c

B) 65%

C) 1320⁰c

D)  62%

Explanation:

Nickel alloy composition : 50 wt% Ni - 50 wt%

initial temperature = 1200⁰c = 2190⁰F

A) The temperature at which the first liquid phase form

from the attached diagram the temperature at which the first liquid if formed is 1270⁰c ( at point 2 )

B ) The composition of this liquid phase ( THE FIRST LIQUID )

the composition is found at point 3

wt % of Nickel = 35%, wt% of copper = 100 - 35 = 65%

C ) The temperature at which the alloy melts completely

from the attached diagram the temperature = 1320⁰c ( point 4 )

D)  The composition of the last solid remaining prior to complete melting

this can be gotten at point 5 and calculated as

wt % of Ni = 62%

wt % of Cu = 100 - 62 = 38%

Answer:

C. Walk four times per week

Explanation:

If she wants to increase her time then, she has to walk four times per week.

The total distance covered by any object per unit of time is known as speed. It depends only on the magnitude of the moving object. The unit of speed is a meter/second. The generally considered unit for speed is a meter per second.

The mathematical expression for speed is given by

speed = total distance /Total time

As given in the problem Lyla walks three times per week for 45 minutes at a speed of 4.0 miles per hour. She must walk four times a week if she wants to extend her time.

Thus, the correct answer is option C.

Learn more about speed from here, refer to the link;

brainly.com/question/7359669

#SPJ2

The question is incomplete, the complete question is,

Lyla walks three times per week for 45 minutes at a speed of 4.0 miles per hour. She wants to increase her time. What should she do?

A. Walk at 4.5 miles per hour.

B. Walk for 50 minutes.

C. Walk four times per week.

D. Walk up and down more hills.

Answer:

healthy diet

Explanation:

Exercise and a healthy diet are the two things people do to stay healthy

Answer:

Mass will not change based on location, while weight will change based on gravitational pull.

Explanation:

The formula for weight is mass*gravitational pull, hence weight changes based on gravitational pull

Mass will not change based on location, while weight will change based on gravitational pull. This is a true statement about mass and weight.

The most fundamental characteristic of matter is mass, which is one of the fundamental quantities in physics. Mass is a term used to describe how much matter is there in a body. The kilograms is the SI unit of mass (kg). A body's mass remains constant at all times.

The amount of weight t indicates how much gravity is pulling on a body. The weight formula is provided by: w = mg

Weight being a force The SI unit of weight is the Newton, which is also the same as the SI unit of force (N). When we look at how weight is expressed, we can see that it depends on both mass and the acceleration caused by gravity; while the mass may not change from one location to another, the acceleration caused by gravity does.

Learn more about mass here:

https://brainly.com/question/19694949

#SPJ3

Answer:

North of west

Explanation:

Acceleration is the change in velocity over change in time.

a = Δv / Δt

The x component of the acceleration is:

aₓ = (0 − v₁ₓ) / (t₂ − t₁)

aₓ = -v₁ₓ / (t₂ − t₁)

aₓ < 0

The y component of the acceleration is:

aᵧ = (v₂ − v₁ᵧ) / (t₂ − t₁)

aᵧ > 0

Therefore, the acceleration points northwest.

The average acceleration of the object between time t1 and t2 was directed north of west.

What is Vector?

                             a = v/t

Now, The x component of the acceleration is:

          aₓ = (V2 − V1x) / (t2 − t1)

          aₓ = -V1x/ (t2 − t1)

Because the x component of V2 is 0.

          aₓ < 0

Similarly, The y component of the acceleration is:

          aᵧ = (v₂ − v₁ᵧ) / (t₂ − t₁)

          aᵧ > 0

Thus, The average acceleration of the object between time t1 and t2 was directed north of west.

Learn more about vector quantities and scalar quantities here -

https://brainly.com/question/356987

#SPJ2

Answer:

1) Newton's first law of motion states an object will remain at rest or in uniform will be in uniform motion in a straight line unless a force acts on it

2) Newton's second law states the acceleration of an object is directly proportional to the applied force acting on an object and inversely proportional to the mass of the object

Explanation:

1) With Newton's first law, we are able arrange things within a space and schedule meetings in time knowing that they will remain in place unless an external force changes their positions

2) An example of Newton's second law of motion is that small objects such as a ball are easily accelerated and can be given appreciable acceleration for flight by single, one time contact (such as kicking the ball) while larger objects such as a rock require sustained force application to change their location.

Answer:

  357.5 miles

Explanation:

  distance = speed × time

  distance = (55 mi/h) × 6.5 h = 357.5 mi

The train will travel 357.5 miles in 6.5 hours.

Answer:

This is called restricted speed

Explanation:

To find the average of these numbers, we just have to add the three numbers together and divide by 3.

Answer:

7. 20,000,000 mL.

8. 8,000 m.

9. 120,000 secs.

10. 4

Explanation:

7. Determination of the volume in millilitres (mL)

Volume in litre (L) = 20,000 L

Volume in millilitres (mL) =..?

The volume in mL can be obtained as follow:

1 L = 1,000 mL

Therefore,

20,000 L = 20,000 x 1,000 = 20,000,000 mL.

Therefore, 20,000 L is equivalent to 20,000,000 mL.

8. Determination of the distance in metre (m)

Distance in mile = 5 mile

Distance in metre =?

First, we shall convert from mile to kilometre.

This can be done as follow:

1 mile = 1.6 km

Therefore,

5 mile = 5 x 1.6 = 8 km

Finally, we shall convert 8 km to metre (m).

This is illustrated below:

1 km = 1,000 m

Therefore,

8 km = 8 x 1,000 = 8,000 m

Therefore, 5 miles is equivalent to 8,000 m.

9. Determination of the time in seconds.

Time = 400 minutes for 5 days.

First, we shall convert 400 mins to hour.

This is illustrated below:

60 minutes = 1 hour

Therefore,

400 mins = 400/60 = 20/3 hours

The time (hours) is 20/3 hours in 1 day.

Therefore, the time (hours) in 5 days will be = 20/3 x 5 = 100/3 hours.

Next, we shall convert 100/3 hours to minutes.

This is illustrated below:

1 hour = 60 minutes

Therefore,

100/3 hours = 100/3 x 60 = 2000 mins

Finally, we shall convert 2000 mins to seconds.

This is illustrated below:

1 mins = 60 secs

2000 mins = 2000 x 60 = 120,000 secs.

Therefore, the time is 120,000 secs.

10. Determination of the number of significant figures.

To obtain the significant figures of a number, we simply count all the numbers available.

Therefore, the number of significant figures for 9876 is 4.

Answer:

Here are two security mechanisms that are widely used in electrical circuits as well as appliances.

Explanation:

Observation: The chimpanzee climbed the tall tree.

Inference: The chimpanzee must be very strong,

Explanation:

An inference differs from an observation because an inference is a guess or possible explanation about a phenomenon. On the other hand, an observation is a statement based on evidence gathered through the senses. In this context, the sentence that is an observation is "The chimpanzee climbed the tall tree" because this statement is based on visual evidence. Moreover, the inference is "The chimpanzee must be very strong" because this is just a guess to explain how the chimpanzee climbed up the tree.

Answer:

option a is correct

Explanation:

water ∠iron∠aluminium∠mercury

water density =1.0000

iron =7.487

aluminium=2.07

mercury=13.59

Answer:

Gravitational fields are determined only by the mass ( or mass-energy) of a body. ... magnetic fields are produced by charged particles in motion, and depend on the charge and velocity of these particles, but not on their mass. Magnetic fields are 'polar' fields with a North and South polarity.

Explanation:

Answer:

Diffusion depends among many other things also upon the concentration gradient of the diffusing substance.For example if there are two boxes with given particles first isolated from each other and if they are bought in contact, then there is a net diffusion of particles from a box with higher concentration of particles to box with lower concentration. And also diffusion rate depends at any instant directly on the concentration difference between them at that instant.Now the vaccum is equivalent to an empty box which means with this one leads to a maximum diffusion rate when bought in contact with a box with particles because there is maximum concentration difference.That is vaccum is empty ( except for energy perturbations and a small concentration of particles which will be zero for our purpose) and any bunch of particles will find least resistance to diffuse as just outside this bunch there is ‘0' concentration of the particles.

Answer:

The correct option is;

C) Equatorial coordinate system

Explanation:

The equatorial coordinate system is which has the most wide spread use in coordinate system for astronomy for mapping the location of celestial bodies such as stars by use of an imaginary projected celestial sphere or to rectangular coordinates with the Earth at the center.  Extending the Earth's axis onto the celestial sphere is essentially the projection of the Earths axis outwards to intersect the sphere at the celestial poles.

c, 'equatorial coordinate system'

its the correct answer on the test,,, goodluckk :))!!

Answer:

0.4113772 s

Explanation:

Given the following :

Mass of bullet (m1) = 8g = 0.008kg

Initial horizontal Velocity (u1) = 280m/s

Mass of block (m2) = 0.992kg

Maxumum distance (x) = 15cm = 0.15m

Recall;

Period (T) = 2π√(m/k)

According to the law of conservation of momentum : (inelastic Collison)

m1 * u1 = (m1 + m2) * v

Where v is the final Velocity of the colliding bodies

0.008 * 280 = (0.008 + 0.992) * v

2.24 = 1 * v

v = 2.24m/s

K. E = P. E

K. E = 0.5mv^2

P.E = 0.5kx^2

0.5(0.992 + 0.008)*2.24^2 = 0.5*k*(0.15)^2

0.5*1*5.0176 = 0.5*k*0.0225

2.5088 = 0.01125k

k = 2.5088 / 0.01125

k = 223.00444 N/m

Therefore,

Period (T) = 2π√(m/k)

T = 2π√(0.992+0.008) / 233.0444

T = 2π√0.0042910

T = 2π * 0.0655059

T = 0.4113772 s

The period of the simple harmonic motion (SHM) is 0.42 s.

The given parameters;

The final velocity of the system after the impact is calculated as follows;

[tex]m_1 u_1 + m_2u_2 = v(m_1 + m_2)\\\\0.008(280) \ + \ 0.992(0) = v(0.008 \ + \ 0.992)\\\\2.24 = v(1) \\\\v = 2.24 \ m/s[/tex]

The spring constant is calculated as follows;

[tex]\frac{1}{2} kx^2 = \frac{1}{2} mv^2\\\\k = \frac{mv^2}{x^2} \\\\k = \frac{(0.008 + 0.992))\times 2.24^2}{(0.15)^2} \\\\k = 223 \ N/m[/tex]

The angular speed of the simple harmonic motion (SHM) is calculated as follows;

[tex]\omega = \sqrt{\frac{k}{m} } \\\\\omega = \sqrt{\frac{223}{(0.008 + 0.992)} }\\\\\omega = 14.933 \ rad/s[/tex]

The period of the oscillation is calculated as follows;

[tex]T = \frac{2\pi }{\omega} \\\\T = \frac{2\pi }{14.933} \\\\T = 0.42 \ s[/tex]

Learn more here:https://brainly.com/question/13962907