what features in the the sedimentary or volcanic rock would you look for to tell u overturne limb

Answers

Answer 1

The following are the features in the sedimentary or volcanic rock that would be looked for to tell overturned limb:

1. Sedimentary rock

In sedimentary rocks, the upper surface is usually a layer of rock that has been eroded and exposed. This is commonly referred to as the "upper bed." The lower bed is located beneath the upper bed and is typically more resistant to erosion. The degree of weathering of the two beds can be used to determine whether or not a rock formation has been overturned.

2. Volcanic rock

In volcanic rocks, one can look for fractures and other structural features that may indicate that the rock has been overturned. Another method used to determine whether or not a volcanic rock has been overturned is to look for the presence of vesicles.

Vesicles are gas-filled cavities that are formed during volcanic eruptions. They can be used to determine the orientation of the rock formation.

Learn more about sedimentary rock at

https://brainly.com/question/10709497

#SPJ11


Related Questions

describe both the mechanics and features of a convergent plate boundary that produces andesite volcanoes. be sure to use terms like continental and oceanic crust, the different rock types-granite basalt etc, the subduction zone and trench, and the force that causes the boundary.

Answers

Convergent plate boundary are the plate boundaries which occur when two plates collide into each other. The denser plates move underneath the lighter plate by forming a subduction zone.

What are the Convergent plate boundary?

Convergent Plate Boundary occur when two plates collide into each other. The denser plate moves underneath the lighter one, forming a subduction zone. The force behind the boundary is the motion of plates. When the continental and oceanic crust come together, the oceanic plate sinks under the continental plate because the oceanic plate is denser. The oceanic plate is destroyed at the subduction zone, which is where the Andesite volcano forms.

When it comes to the mechanics of a convergent plate boundary that produces Andesite volcanoes, the two plates that collide into each other are oceanic and continental crust. The oceanic plate is denser than the continental plate, and it moves underneath the lighter one. Andesite volcanoes form as a result of the collision. The subduction zone is where the oceanic plate is destroyed, and the Andesite volcano forms.

Andesite is formed by the fusion of basaltic rock from the oceanic plate and granite from the continental plate. The two rocks mix together to form Andesite, which erupts as a volcano when it comes into contact with the atmosphere. The different rock types involved in the process are granite and basalt. The subduction zone and trench are two of the features of the convergent plate boundary that produces Andesite volcanoes. The convergent plate boundary is a geological feature that occurs when two tectonic plates collide into each other. The denser plate moves underneath the lighter one, forming a subduction zone. The force behind the boundary is the motion of plates. Andesite volcanoes form at the subduction zone when oceanic and continental crust collide.

Learn more about Convergent Plate Boundary here:

https://brainly.com/question/23845744


#SPJ11

Which of the following factors describe the metamorphic conditions at a mid-ocean ridge? -low temperature -low pressure -hot, watery fluids.

Answers

The factors that describe the metamorphic conditions at a mid-ocean ridge are hot, watery fluids.

What are mid-ocean ridges?

Mid-ocean ridges are linear underwater mountain chains that run along tectonic plate boundaries. They are found where two tectonic plates diverge or move away from each other.

Mid-ocean ridges account for about 20% of the Earth's surface area. They also have a major role in oceanic crust formation.

Metamorphic conditions at a mid-ocean Ridge

The following are the factors that describe the metamorphic conditions at a mid-ocean ridge:

Hot, watery fluids - Hot water with minerals like sodium and calcium is released through hydrothermal vents on mid-ocean ridges. This process is called hydrothermal metamorphism. These fluids react with the minerals in the surrounding rock, resulting in the formation of new minerals and rock textures.

Low pressure - Hydrothermal vents on mid-ocean ridges are under very low pressure due to the high pressure of the surrounding ocean water. The low pressure allows minerals and hot water to circulate freely, resulting in the formation of new minerals and rock textures.

Low temperature - Hydrothermal fluids in mid-ocean ridges have a lower temperature than those in continental settings. However, they are still hot enough to cause metamorphism in the surrounding rock.

Your question is incomplete but most probably your full question was:

Which of the following factors describe the metamorphic conditions at a mid-ocean ridge? Select all that apply.

-low temperature

-low pressure

-hot

- watery fluids.

- dry land

- weather

Learn more about mid ocean ridges at

https://brainly.com/question/11504396

#SPJ11

there is a narrow peninsula that extends south of the state of california. what is the name of this peninsula?

Answers

Answer:

Explanation:

The California Peninsula is a narrow strip of land separated from the Mexican territory by the Gulf of California or Sea of Cortez, and the Colorado River. Its area covers 143,600 square kilometers which holds two of the Mexican states: Baja California and Baja California South.

A function, f. is defined by f(x,y) = 3x2 - 4y. What is the value of f(3,2) ?

Answers

F(3,2) is assigned a value of 19.

What are the different sorts of function?

A relationship between a collection of inputs and outputs is known as a function. A function is, to put it simply, a relation between inputs in which each input is connected to precisely one output. Each function has a range, codomain, and domain. The usual way to refer to a function is as f(x), where x is the input.

A function called f is defined by the notation y=f(x). This should be understood as "y is indeed a function of x." The input variable, or outcome variable, is represented by the letter x. The output value, also known as the dependent variable, is denoted by the letters y, or f(x).

f(x, y) = 3[tex]x^{2}[/tex] - 4y = 3*3∧2 - 4*2

= 3*9- 8  so,  27-8=19

To know more about function visit:

https://brainly.com/question/28193994

#SPJ1

rock that has formed from lithification of any type of sediment, including clastic or chemical sediments, or organic remainsa.weathering b. metamorphicc. lavad. igneouse.magma f.erosion g.sedimentary h. protolith

Answers

Rock that has formed from lithification of any type of sediment, including clastic or chemical sediments, or organic remains is known as sedimentary rock. Therefore the correct option is option G.

Sedimentary rocks are classified into three groups. These are: clastic, chemical, and organic sedimentary rocks. Clastic sedimentary rocks

Clastic sedimentary rocks are made up of pre-existing rock fragments that have been eroded, transported, and deposited by wind, water, or ice. Examples of clastic rocks are shale, sandstone, and conglomerate.

Chemical sedimentary rocks Chemical sedimentary rocks are formed when dissolved minerals are precipitated out of water. Examples of chemical rocks are limestone and gypsum.

Organic sedimentary rocks Organic sedimentary rocks are made up of the remains of once-living plants and animals. Examples of organic rocks are coal and chalk.

Sedimentary rocks are typically formed in layers, known as strata, and often contain fossils of ancient plants and animals.

Therefore the correct option is option G.

For such more question on sedimentary rock:

https://brainly.com/question/30765754

#SPJ11

angular momentum is thought to play an important role in tornado formation because as the diameter of rotating air is reduced, the wind speeds increase as angular momentum is

Answers

The conservation of angular momentum is one of the mechanisms that can lead to a tornado's formation

Angular momentum is thought to play an important role in tornado formation because as the diameter of rotating air is reduced, the wind speeds increase as angular momentum is conserved.How is angular momentum thought to be important in the formation of a tornado?

Angular momentum is thought to be important in the formation of a tornado because as the diameter of the rotating air is decreased, the wind speeds are increased as angular momentum is conserved. This occurs when air is drawn into a thunderstorm and then forced to rotate through the vertical stretching.

The result is a rotating column of air with a very small diameter (typically only a few hundred meters).The conservation of angular momentum is a concept that states that the total amount of angular momentum in a closed system will remain constant.

This means that when the diameter of the rotating air column is decreased, the speed of the rotating air column increases in order to conserve the total angular momentum. This process is important in the formation of a tornado because it results in very high wind speeds that can cause significant damage.

The development of a tornado can be initiated by a combination of several factors such as atmospheric instability, wind shear, and moisture content. The conservation of angular momentum is one of the mechanisms that can lead to a tornado's formation.

TO KNOW ABOUT Angular momentum:

https://brainly.com/question/29897173

#SPJ11

explain why an understanding of geological time is critical to both geologists and the public in general.

Answers

Geological time is an important concept for both geologists and the public, as it allows us to comprehend and explain the age of the Earth and its evolution over time. It allows us to explain Earth processes and how they impact human life.

For geologists, geological time is essential for interpreting the evolution of the Earth, its climate and its environments. By understanding geological time, geologists can create theories about how the Earth formed and developed over time.

This helps them to better predict and explain natural phenomena, like earthquakes, volcanoes and floods.

For the public, understanding geological time is critical to understanding the effects of climate change, and how changes to the Earth’s environment can affect the human population.

By understanding how the Earth and its environment have evolved over time, the public can better understand the impacts of climate change and take appropriate action to protect their environment.

Finally, an understanding of geological time is also important for understanding the diversity of life on Earth. By understanding how life has evolved and adapted over time, we can better appreciate the amazing variety of life on our planet.

In conclusion, an understanding of geological time is critical for both geologists and the public. It allows us to understand and appreciate the history of the Earth and its environment, as well as the impacts of climate change and the diversity of life on Earth.

To know more about geological time here

https://brainly.com/question/22502144

#SPJ11

Air flow in a Northern Hemisphere high pressure zone is
a. downward, outward and clockwise.
b. downward, outward and counterclockwise.
c. inward, upward and clockwise.
d. inward, upward and counterclockwise.
e. downward, inward and clockwise.

Answers

Airflow in a Northern Hemisphere high-pressure zone is downward, outward and clockwise. option A is the right answer.

What is a high-pressure system?

A high-pressure system is a weather condition characterized by stable, dry, and clear weather, according to meteorologists.

High-pressure systems occur when air masses having greater density than the air masses surrounding them ascend from the earth's surface and diverge in the upper atmosphere.

As the air cools, it decreases in temperature and becomes more dense, resulting in a high-pressure system.

Air moves in a clockwise manner in the Northern Hemisphere in a high-pressure system. In the Northern Hemisphere, a high-pressure system is created when air converges towards the surface of the earth.

As a result, air descends to the surface of the earth, causing increased atmospheric pressure. Thus, option A is the right answer.

TO KNOW ABOUT  Northern Hemisphere :

https://brainly.com/question/26841745#

#SPJ11

what affects the patterns of prevailing winds, and how does it do so?

Answers

Some of the things that affect the patterns of prevailing winds include:

Pressure gradientsCoriolis effect

How are prevailing wind patterns affected by pressure and the Coriolis effect ?

Differences in atmospheric pressure between two areas can create a pressure gradient force, which causes air to move from high pressure to low pressure. This movement of air can lead to the development of prevailing winds.

The Coriolis effect is caused by the rotation of the Earth and causes winds to deflect to the right in the Northern Hemisphere and to the left in the Southern Hemisphere. This effect plays a key role in shaping the patterns of global wind systems.

Find out more on the Coriolis effect at https://brainly.com/question/1757337

#SPJ1

how far from the heavy rain of a thunderstorm can lightning strike

Answers

Answer:

6 to 25 miles away from a storm

Explanation:

Lightning can strike as far as 10 miles away from a thunderstorm, although most lightning occurs within 6 miles of the storm. In some cases, lightning can strike up to 25 miles away from the thunderstorm. It's important to remember that lightning can be unpredictable and can strike in areas that are not necessarily experiencing heavy rain or even thunder. So, if you can hear thunder, you are close enough to the storm to be at risk of being struck by lightning. It's important to seek shelter indoors or in a hard-topped vehicle when thunderstorms are in the area.

1. this fossil will have a space remaining in a rock where the original fossil was____ (MOLD) 2. this fossil is replaced with minerals such as silica and calcite is called____ (CAST) 3. fossils such as footprints, coprolites, and burrows is called____

Answers

This fossil will have a space remaining in a rock where the original fossil was mold.This fossil is replaced with minerals such as silica and calcite is called cast.Fossils such as footprints, coprolites, and burrows are called trace fossils.

A mold is a natural cavity in a rock or sediment that is formed when the original fossil is dissolved by underground water. The mold preserves the shape of the original organism, and it may contain other important information, such as the size of the organism, its texture, and its orientation. Molds are useful to paleontologists because they provide a detailed record of the organism's anatomy, and they can be used to make casts or replicas of the original fossil.

A cast is a replica of a fossil that is made by filling a mold with minerals such as silica or calcite. The minerals harden and form a solid replica of the original organism. Casts are useful to paleontologists because they provide a 3D model of the fossil, and they can be studied in detail without damaging the original fossil.

Trace fossils are preserved remains of the activity that is not directly related to the organism's body. Examples of trace fossils include footprints, coprolites (fossilized feces), burrows, and nests. Trace fossils are useful to paleontologists because they provide information about the organism's behavior, habitat, and environment. They can also help to identify the presence of extinct animals that may not have left a fossilized body behind.

Learn more about fossils at https://brainly.com/question/28122522

#SPJ11

The early atmosphere on Earth was _____.a. mostly carbon dioxide
b. extremely cold
c. full of oxygen
d. hot

Answers

The early atmosphere on Earth was mostly carbon dioxide.

So, the correct answer is A.

What is the atmosphere?

An atmosphere is the blanket of gas that surrounds a planet or other celestial object. Earth's atmosphere, which is mainly composed of nitrogen and oxygen, contains small amounts of other gases. The atmosphere can be broken down into several different layers. Troposphere, stratosphere, mesosphere, thermosphere, and exosphere are the five layers of the Earth's atmosphere. The early atmosphere of Earth was mostly carbon dioxide.

The atmosphere of the Earth comprises a variety of gases, including oxygen, nitrogen, argon, and carbon dioxide. These gases are unevenly distributed in the atmosphere due to the Earth's rotation, atmospheric pressure, and other factors. The majority of the Earth's atmosphere is composed of nitrogen (about 78 percent) and oxygen (about 21 percent). Other gases make up the remaining 1% of the atmosphere, with trace amounts of other elements and compounds contributing to the air we breathe.

Learn more about the atmosphere at https://brainly.com/question/24925283

#SPJ11

How does climate change affect albedo?

Answers

Earth's albedo decreases as the amount of snow and ice covering the surface decreases as a result of melting caused by rising global temperatures.

What factor that affects climate is albedo?

The ability to reflect sunlight into space is known as albedo. Sunlight is reflected by deserts, clouds, ice and snow, and aerosols (particles in the air). The more solar energy that is reflected, the higher the albedo; the chillier The albedo is also raised as the ice cover expands as the temperature drops. The growing conditions for alpine grasslands on the TP, where temperature is the primary constraining factor, are improved by increased vegetation coverage, which results in a lower surface albedo and more energy absorbed (Bonan et al. 1992, Betts 2000, Barnes and Roy 2008).

A natural greenhouse effect is the cause of the warm global climate on Earth. Earth's surface is heated by the majority of the Sun's light as it passes through the atmosphere. Infrared radiation is released by the warmed oceans and land. Heat-trapping gases in the atmosphere of Earth absorb some of the infrared radiation.

To learn more about climate visit :

https://brainly.com/question/10440860

#SPJ1

Consider any other changes in your locality that you think have resulted from climate change.​

Answers

Answer:

Explanation:

Increased frequency and intensity of heatwaves and droughts, leading to decreased water availability and increased risk of wildfires.More frequent and severe storms, including hurricanes, tornadoes, and thunderstorms, leading to flooding and property damage.Changes in precipitation patterns, such as increased rainfall in some areas and decreased rainfall in others, leading to changes in crop yields and water availability.Rising sea levels and increased coastal erosion, leading to loss of property and infrastructure in coastal communities.Changes in the distribution and abundance of plant and animal species, as they adapt to changing climatic conditions.Increased incidence of vector-borne diseases, such as Lyme disease and West Nile virus, as warmer temperatures allow disease-carrying insects to thrive in new areas.Shifts in the timing of seasonal events, such as flowering and migration, as a result of changing temperatures and weather patterns.

in north america, which of the following frequently consumed items is most likely to be supplied by a trans-national corporation?a. Milk
b. Water
c. Coffee
d. Electricity

Answers

In North America, the most likely product to be supplied by a transnational corporation among the frequently consumed items is coffee.

The correct answer is C.

Transnational corporations are businesses that have headquarters in one country and subsidiaries in multiple other countries. These corporations are big enough to affect local economies, politics, and people’s lives in a significant way

North America is one of the largest coffee-consuming regions globally, and it's produced in countries such as Brazil, Colombia, and Costa Rica. The vast majority of coffee traded internationally is produced by small farmers and then sold to intermediaries for processing and roasting.

The commodity chain of coffee is increasingly being dominated by TNCs (Transnational Corporations) such as Starbucks, Nestlé, and Jacobs Douwe Egberts, among others. These corporations buy large amounts of coffee beans to process, package, and distribute to retail outlets globally. Therefore, the most likely product to be supplied by a transnational corporation among the frequently consumed items in North America is coffee.

Learn more about transnational corporations at https://brainly.com/question/29798384

#SPJ11

A fog that develops when warm, moist air blows over a cold current (such as the California Current) is an example of ____ fog.a) evaporationb) radiationc) convectiond) advection

Answers

The fog that develops when warm, moist air blows over a cold current (such as the California Current) is an example of advection fog. Advection fog occurs when warm, moist air blows over a cooler surface, resulting in cooling of the air and condensation of the moisture, forming fog.

When the warm air blows over the cold current, it is cooled and its capacity to hold moisture decreases. This causes some of the moisture to condense, forming droplets of water, or fog. As the warm air is cooled and continues to move, it brings more moisture, leading to an increase in fog.

Advection fog is common in coastal areas, especially during the summer months when the cold ocean current is juxtaposed with the warm landmass. It is also common in the Rocky Mountains when warm air from the Pacific moves over the cold Rocky Mountains.

Advection fog is often seen as a low, stratus cloud that can range from thin to quite dense. It can form over a wide area and may linger for several days. It can reduce visibility to a few hundred feet and can cause dangerous driving conditions due to the low visibility.

Advection fog is a very common type of fog and can be seen in many places around the world. It is an important factor to consider when planning activities in coastal areas or near mountains.

To know more about advection fog here

https://brainly.com/question/30700027

#SPJ11

air flowing toward the equator is pushed and air flowing away from the equator is pushed is called

Answers

The phenomenon of air flowing toward the equator being pushed and air flowing away from the equator being pushed is known as the Hadley Cell.

This atmospheric circulation is named after George Hadley, an English lawyer who first proposed the concept in 1735.

The Hadley Cell is a two-celled atmospheric circulation in which air near the equator rises up and is pushed to the tropics, cooling as it moves away from the equator.

At the tropics, the air sinks back down to the surface and is pushed away from the equator, heating up as it moves towards the poles.

This circulation pattern helps to redistribute heat around the Earth and keeps the equator warm while cooling off the poles. This is why temperatures decrease significantly the further away you are from the equator.

The Hadley Cell is an important part of the global climate system, and without it, the planet would be significantly colder overall.

To know more about Hadley Cell here

https://brainly.com/question/10769956

#SPJ11

Classifying ----- is critical for communicating regional environmental characteristics, observing broad global patterns, and analyzing large amounts of meteorological data collected over years or decades.

Answers

Answer:

a

Explanation:

Question 1 3 pts The style of eruption depends on the plate tectonic setting in which the volcano is situated. Compare the different eruption styles you could observe at a divergent versus a convergent plate boundary. Make sure to address the roles that composition, viscosity, and gas content play in your answer.

Answers

At a divergent plate boundary, the plates are moving away from each other. This type of plate boundary is typically associated with less explosive eruptions.

Eruptions in this type of setting are usually composed of basaltic magma, which is low in silica content and very fluid.

These eruptions produce lava flows and rarely cause ash and pyroclastic flows. Since the viscosity of basaltic magma is low, gas bubbles can escape easily and cause less explosive eruptions.

At a convergent plate boundary, the plates are pushing together. This type of plate boundary is typically associated with explosive eruptions.

Eruptions in this type of setting are usually composed of andesitic or rhyolitic magma, which is high in silica content and more viscous than basaltic magma.

These eruptions produce ash and pyroclastic flows, and can be more explosive due to the higher viscosity of andesitic or rhyolitic magma.

The gas bubbles are more difficult to escape, so pressure builds up and causes more explosive eruptions.

To know ABOUT explosive eruptions:

https://brainly.com/question/1601925#

#SPJ11

for people living on the edge of subsistence, climate changes brought about by the made life even more precarious in the tumultuous century following the reformation

Answers

The tumultuous century following the reformation was a difficult period for those living on the edge of subsistence. Climate change contributed to further hardship and insecurity.

Extreme weather events like floods, droughts, and cold spells had a direct impact on subsistence crops, meaning people had to compete for increasingly scarce resources. War and famine also disrupted farming activities and caused food shortages.

In addition, rising temperatures meant that previously suitable farming land became too hot and dry for cultivation. This led to an increase in poverty and displacement, as people were forced to move to find new sources of food and income.

The precariousness of life on the edge of subsistence was exacerbated by climate change, with vulnerable populations feeling the effects of a changing climate most acutely.

Know more about Reformation here

https://brainly.com/question/18010893#

#SPJ11

What are gases that accumulate in the atmosphere and contribute to global warming?

Answers

The gases that accumulate in the atmosphere and contribute to global warming are known as greenhouse gases. They trap heat from the sun and cause the Earth's temperature to increase.

What is global warming?

Global warming refers to the phenomenon of Earth's average surface temperature increasing due to human activities that increase the concentration of greenhouse gases in the atmosphere. Greenhouse gases such as carbon dioxide, methane, and water vapor trap heat in the Earth's atmosphere, causing global temperatures to rise. This is referred to as the greenhouse effect.

What is the greenhouse effect?

The greenhouse effect is a natural process that occurs when certain gases in the Earth's atmosphere, referred to as greenhouse gases, trap heat from the sun, preventing it from escaping into space. As a result, the Earth's temperature is kept within a range that is conducive to life as we know it.

However, human activities such as burning fossil fuels, deforestation, and industrial processes have led to an increase in the concentration of greenhouse gases in the atmosphere, intensifying the greenhouse effect and causing global warming. This is a significant concern, as global warming can have a range of negative impacts on the environment and human societies.

Learn more about global warming at

https://brainly.com/question/12908180

#SPJ11

large metallic objects that are clustered in bands called _____

Answers

Answer:

Large metallic objects that are clustered in bands are called "asteroid belts".

according to the map, most industrialization in europe occurred in the northwest . the production of was profitable throughout western europe. the building of helped transport goods throughout europe. according to the map, the population trend indicates that more people are moving into

Answers


According to the map, most industrialization in Europe occurred in the northwest. The production of textiles was profitable throughout Western Europe.

The building of railroads helped transport goods throughout Europe. According to the map, the population trend indicates that more people are moving into urban areas.

To summarize:

- Most industrialization in Europe occurred in the northwest.
- The production of textiles was profitable throughout Western Europe.
- The building of railroads helped transport goods throughout Europe.
- The population trend indicates that more people are moving into urban areas.

TO KNOW ABOUT Western Europe:

https://brainly.com/question/14098972#

#SPJ11

how would you tell if a rock is crystalline? group of answer choices it contains crystals that have been cemented together. it does not contain crystals at all. it contains interlocking crystals. it contains all one type of crystal.

Answers

Crystalline rocks contain crystals that have been cemented together. These crystals are usually interlocking, meaning they fit together tightly. To determine if a rock is crystalline, you can look for certain characteristics.

The first characteristic of a crystalline rock is that it contains all one type of crystal. This crystal type can be identified by its shape and color. Crystals often appear in regular patterns, giving a crystalline rock a distinct, geometric look.


The second characteristic of a crystalline rock is that it is relatively hard. Crystalline rocks are usually harder than non-crystalline rocks. To test the hardness of a rock, you can use a simple scratch test. If the rock is crystalline, it will scratch metal or glass but not be scratched by them.


The third characteristic of a crystalline rock is that it does not contain any voids or gaps. Crystalline rocks are usually solid and the crystals are very tightly packed together. This creates a solid mass with no voids or gaps.



Finally, crystalline rocks often have a shiny or glassy appearance. This is due to the light reflecting off of the crystals. The shiny surface also reflects light and appears to have a glossy sheen.



To determine if a rock is crystalline, look for these characteristics. It should contain all one type of crystal, be relatively hard, have no gaps or voids, and have a glossy or shiny appearance. If these characteristics are present, the rock is likely crystalline.

To know more about crystalline rocks here

https://brainly.com/question/30750058

#SPJ11

What solid figure has two bases, but no lateral faces?

cone
cylinder
rectangular prism
triangular prism

Answers

Answer: Cylinder

Explanation:

Think of a cylinder. It has 2 parallel circular bases and a curved surface.

None of those are considered lateral. Therefore, your answer is a cylinder.

describe how and what the properties of p s waves tell us about the interior of the earth. how do these data help explain a mechanism for plate tectonics?

Answers

The movement of the P and S waves through the earth reveals information about the earth's interior.

The P and S waves are produced as a result of an earthquake. The seismic waves are sent through the earth's interior as a result of an earthquake.

The P waves can travel through solid, liquid, or gaseous materials.

The S waves, on the other hand, are unable to pass through a liquid. They can only travel through solids. Therefore, it can be inferred that the Earth's outer core is liquid, as S waves are not transmitted through it.

The P waves' speed varies depending on the material they pass through. This varies as the density of the material through which the wave is passing varies. Therefore, it is safe to say that the earth's interior is made up of varying densities. This is also responsible for the P wave's reflection and refraction. P waves that move through denser materials are refracted while P waves that move through less dense materials are reflected.

Scientists have used this data to make predictions about the Earth's interior. Tectonics refers to the movement of the earth's plates. Tectonic plates can be shifted by the pressure of these waves. Tectonic plates in the earth's lithosphere can be affected by this motion.

The study of the properties of the P and S waves helps to explain a mechanism for plate tectonics. The waves' movement and characteristics provide data that help scientists better understand the dynamics of the Earth's interior. This data can help scientists make predictions about how the earth's plates will move in the future. The study of tectonics is crucial because it helps to explain volcanic and earthquake activity.

Learn more about plate tectonics:

https://brainly.com/question/2325633

#SPJ11

at the shore, why does the sea level often drop dramatically before a tsunami arrives?

Answers

Answer:

Tsunami waves are often preceded by coastal waters being dragged out when the trough arrives before the crest.

Explanation:

how many new moons was jupiter discovered to have in february 2023?

Answers

Answer:

Astronomers have discovered 12 more moons orbiting Jupiter.

Explanation:

On Feb 16 2023,the planet was discovered to have 12 more moons orbiting Jupiter.

The Aleutian and Hawaiian Islands form from completely different processes related to Plate Tectonics. Using Plate Tectonic theory and correct technical terms, explain how they form.

Answers

The Aleutian and Hawaiian Islands form from two different processes related to Plate Tectonics. The Aleutian Islands are formed by the subduction of the Pacific plate beneath the North American plate at the Aleutian Trench. This process is also known as a convergent plate boundary.

During subduction, the oceanic lithosphere is consumed and in the process magma is produced and rises to the surface. This magma then cools and hardens to form the Aleutian Islands.

The Hawaiian Islands are formed by a process known as hotspot volcanism. Hotspots are stationary mantle plumes that rise from the mantle and melt the lithosphere.

This process is also known as a divergent plate boundary. The Hawaiian hotspot is located beneath the Pacific plate and has created the Hawaiian Ridge of islands, as the Pacific plate has moved over it.

The molten material erupts to the surface to create new volcanoes and as the older volcanoes move away from the hotspot, they become inactive and form islands.

Both processes create volcanic islands, but the way in which the volcanoes form differs between the Aleutian and Hawaiian Islands. The Aleutian Islands are formed through subduction while the Hawaiian Islands are formed through hotspot volcanism.

To know more about Plate Tectonic theory here

https://brainly.com/question/29774532

#SPJ11

Commercial agriculture in dry climates relies heavily on irrigation. Which of the following best explains an environmental concern that results from irrigation in arid regions?
The high use of water for agriculture increases the price of water for people in urban areas.
The soil will have increased salinity, leading to soil erosion and reduced nutrients in the soil for plant health.
The increased production that results from irrigation of the crop will lead to decreases in crop prices as the total crop harvested will be higher.
The plants grown in this dry region will start to adapt to use less water, but the period to maturity will increase.

Answers

The soil will have increased salinity, leading to soil erosion and reduced nutrients in the soil for plant health. this can be the effect of commercial agriculture.

The phrase "commercial agriculture" is frequently used to describe industrial-sized farming. But, in a legal sense, even operating a tiny produce stand is considered commercial agriculture. When food is grown commercially, it is done so to sell it. Marketing includes marketing to or through a variety of outlets, such as produce stands nearby, supermarkets, wholesalers, foreign nations, and restaurants. Due to the fact that commercial agriculture generates income that goes towards a nation's gross domestic product, it is often preferred to subsistence farming. As a result, governments frequently provide financial assistance to commercial farms in an effort to boost output. Commercial farms strive to optimise yields at the lowest possible cost because their business model depends on revenues.

Learn more about commercial agriculture here:

https://brainly.com/question/28768845

#SPJ1

Other Questions
Which of the following best describes the shift to modernism in late-nineteenth-century European cultural and intellectual life? efficacy wherein an experiment matches its stimuli, conditions, and procedures to the natural world question mark Hi help me with this question Solve for X30=5(X+5)X=? which process is represented by the diagram shown? Germination, fertilization, mitotic cell division, meiotic cell division Why does the U.S. Senate vote on appointments to the president's cabinet? A. to provide a check on the power of the legislative branch B. to ensure that the president appoints members of his own party C. to provide a check on the power of the executive branch D. to ensure that citizens' voices are heard through their voting question if all other factors are held constant, which of the following results in an increase in the probability of a type ii error? responses the true parameter is farther from the value of the null hypothesis. the true parameter is farther from the value of the null hypothesis. the sample size is increased. the sample size is increased. the significance level is decreased. the significance level is decreased. the standard error is decreased. the standard error is decreased. the probability of a type ii error cannot be increased, only decreased. janice is in the middle of a distinct period of abnormally and persistently elevated mood. in the last week she has cleaned her house from top to bottom, bought a new car that she can't afford, and dug up most of her yard in case she wants a garden next year. janice is experiencing a(n) episode. Which of the following would be expected in a performance management system that is designed with a strong quality orientation? (Select all that apply.)A, an emphasis on cooperation in performance problem solving between managers and employeesB. involvement of bother internal and external customers to set standards and measure performanceC. use of multiple sources in the evaluation of person and system factors Your monthly take-home pay is $900. Your monthly credit card payments are about $135. What percent of your take-home pay is used for your credit card payments?i came up with $765 licensures makes sure that employees have at least a minimally acceptable level of skill proficiency upon completion of a training unit. question 7 options: true false help Ill give brainliest ^^ just question (7) thanks!! Given that x + 1/2 = 5, what is 2*x^2 - 3x + 6 - 3/x +2/x^2pls help me soon a battleship simultaneously fires two shells at enemy ships. if the shells follow the parabolic trajectories shown, which ship gets hit first? which of the following actions will cause the relative humidity of an air parcel to increase? select all that applya.Keep the parcels temperature constant and increase the parcels dew pointb.Decrease the parcels temperature and increasethe parcels dew pointc.Keep the parcels temperature constant and keep the parcels dew point constantd.Increase the parcels temperature and increase the parcels dew pointe.Keep the parcels dew point constant and increase the parcels temperature National Rifle Association is very powerful in the U.S. Which one of the following theoretical models explains why?A. C.W. Mills' Power Elite ModelB. Pluralist ModelC. Conflict perspectiveD. Looking glass theory A research team has genetically engineered a strain of fruit flies to eliminate errors during DNA replication. The team claims that this will eliminate genetic variation in the engineered flies. A second research team claims that eliminating errors during DNA replication will not entirely eliminate genetic variation in the engineered flies(a)Provide ONE piece of evidence that would indicate new genetic variation has occurred in the engineered flies. Weighted Average Method, Physical Flow, Equivalent Units, Unit Costs, Cost Assignment, ABCSwasey Fabrication, Inc., manufactures frames for bicycles. Each frame passes through three processes: Cutting, Welding, and Painting. In September, the Cutting Department of the Tulsa, Oklahoma, plant reported the following data:In Cutting, all direct materials are added at the beginning of the process.Beginning work in process consisted of 41,500 units, 20 percent complete with respect to direct labor and overhead. Costs in beginning inventory included direct materials, $1,205,000; direct labor, $222,800; and applied overhead, $150,000.Costs added to production during the month were direct materials, $2,440,000; direct labor, $3,474,700. Overhead was assigned using the following information:ActivityRateActual Driver UsageInspection$150 per inspection hour4,000 inspection hoursMaintenance$750 per maintenance hour1,600 maintenance hoursReceiving$300 per receiving order2,000 receiving ordersAt the end of the month, 121,600 units were transferred out to Welding, leaving 13,400 units in ending work in process, or 25 percent complete.Required:1. Prepare a physical flow schedule.Swasey Fabrication, Inc.Physical Flow ScheduleUnits to account for:Units, beginning work in processUnits started (transferred in)Total units to account forUnits accounted for:Units completed and transferred outUnits, ending work in processTotal units accounted for2. Calculate equivalent units of production for direct materials and conversion costs.Equivalent UnitsDirect MaterialsConversion Costs3. Compute unit cost under weighted average.Unit direct materials cost$Unit conversion costsTotal unit cost$4. Calculate the cost of goods transferred to Welding at the end of the month. Calculate the cost of ending inventory.Cost of goods transferred out$Ending WIP$5. Prepare the journal entry that transfers the goods from Cutting to Welding.Work in Process-WeldingWork in Process-Cutting a 421 kg block is puled up a 4.54 degree incline by a constant force f of 3282 n. the coefficient of friction mu between the block and the plane is 0.47. how fast in m/s will the block be moving 6 seconds after the pull is applied? Can some one solve this and show their work please a sample of 500 schools in a state results in an average number of students per grade level of 178.6 students, with a margin of error of 45.2 if there are 3250 high schools in the state, what is the estimated number of students per grade level?