What element from space is pulled by gravity and turn into a protostar?

Explanation:

An element is a pure substance that cannot be separated into simpler substances by chemical or physical means.

Answer:

To prepare a 1.00 mol dm^-3 sodium chloride solution, we need to dissolve one mole of sodium chloride in one liter of solution (1000 cm^3).

However, we only need to prepare 100 cm^3 of the solution, which is 1/10 of a liter. So we need to dissolve:

1/10 * 1.00 mol = 0.100 mol

of sodium chloride in 100 cm^3 of solution.

The molar mass of sodium chloride is 58.5 g/mol. So to calculate the mass of sodium chloride required, we can use:

mass = number of moles x molar mass

mass = 0.100 mol x 58.5 g/mol

mass = 5.85 g

Therefore, we need 5.85 g of sodium chloride to prepare 100 cm^3 of 1.00 mol dm^-3 sodium chloride solution.

The positively charged particles found in nucleus of an atom and those are called protons.

Protons are found in the nucleus of the atom. This is a tiny, dense region at the center of the atom. Protons have a positive electrical charge of one (+1) and a mass of 1 atomic mass unit which is about 1.67×10−27 kilograms. There are 2 types of particles in the nucleus. Those particles are neutrons and protons. The positively particle called as protons have unit positive charge and neutrons are neutral in charge.

An atom is defined as a particle of matter that uniquely defines a chemical element. This consists of a central nucleus that is surrounded by one or more negatively charged electrons. It is evident that the nucleus is positively charged and contains one or more relatively heavy particles known as protons and neutrons.

To learn more about Protons

https://brainly.com/question/1481324

#SPJ4

Answer:

a)Electron domain geometry around nitrogen-1 is tetrahedral

b)Hybridization around carbon-1 is sp2

c)The ideal bond angles around oxygen-1 are 120 degrees.

d)Hybrid orbitals overlapping to form the sigma bond between oxygen-1 and nitrogen-2 is sp2 hybrid orbitals from carbon-1 and nitrogen-2

e)There are no pi bonds in the molecule.

Explanation:

a) Electron domain geometry around nitrogen-1 is tetrahedral.The molecular structure of linuron is as follows: There are three carbon atoms in a row. The terminal carbon atom is linked to a methyl group and a chlorine atom. The carbon atom next to it is linked to the nitrogen atom in the herbicide. The third carbon atom is linked to two oxygen atoms, with one of them being a hydroxyl group.

b) Hybridization around carbon-1 is sp2.The carbon atom adjacent to the nitrogen atom is known as carbon-1. This carbon atom is joined to three other atoms. It has an sp2 hybridization since it has three regions of electron density.

c) The ideal bond angles around oxygen-1 are 120 degrees.Bond angles are the angles between two adjacent lines in a Lewis structure. Because oxygen-1 is linked to two other atoms, it has a bent geometry. Its ideal bond angle is 120 degrees.

d) Hybrid orbitals overlapping to form the sigma bond between oxygen-1 and nitrogen-2 is sp2 hybrid orbitals from carbon-1 and nitrogen-2.The sigma bond is the strongest type of covalent bond. Sigma bonds are created when the overlapping orbitals are arranged in a straight line. The sigma bond between oxygen-1 and nitrogen-2 is formed by the overlap of sp2 hybrid orbitals from carbon-1 and nitrogen-2.

e) There are no pi bonds in the molecule.There are no pi bonds in the molecule because all of the bonds are sigma bonds. The molecule consists of single bonds only.

To know more tetrahedral. about refer here: https://brainly.com/question/18612295#
#SPJ11

The solution has a hydronium ion concentration of 1.78 x 10-10 M.

Because of this, the concentration of HCl determines the hydronium ion concentration, which is 0.10 M in HCl and 0.10 M in HCOOH.

We must first formulate the balanced chemical equation for the reaction between ammonia and hydrochloric acid in order to tackle this issue:

NH3 + HCl → NH4+ + Cl-

To accomplish this, we must determine how many moles of each reagent are present in the solution:

moles of NH3 = 0.250 M x 0.1500 L = 0.0375 moles

moles of HCl = 0.200 M x 0.1000 L = 0.0200 moles

Secondly, we must determine how many moles of NH4+ and Cl- ions were generated by the reaction:

moles of NH4+ = 0.0200 moles

moles of Cl- = 0.0200 moles

We can figure out how many NH4+ ions are present in the solution:

[ NH4+ ] = moles / volume = 0.0200 moles / 0.250 L = 0.080 M

We must take into account the fact that NH4+ is a weak acid and will undergo the following reaction with water in order to determine the concentration of hydronium ions:

NH4+ + H2O ⇌ H3O+ + NH3

This reaction's equilibrium constant is represented by the following symbol:

Kw / Kb = Ka

To find Ka, we can rearrange this equation as follows:

Ka = Kw / Kb = (1.0 x 10-14) / (1.80 x 10-5), which is 5.56 x 10-10.

The equilibrium expression for the reaction between NH4+ and water may now be written as follows:

Ka = [H3O+][NH3]/[NH4+].

To solve for [H3O+], we can rewrite the equation above as follows:

[ H3O+ ] = (Ka x [ NH4+ ]) / [ NH3 ] = (5.56 x 10^-10) x (0.080 M) / (0.250 M) = 1.78 x 10^-10 M

To know more about hydronium visit:-

https://brainly.com/question/28609181

#SPJ1

Carboxylic acids are more acidic than water or ethyl alcohol esters due to their stronger resonance stabilization. Carboxylic acids contain a carboxyl group (COOH) that is able to stabilize the extra electron density of the conjugate base (COO-) through resonance. The more electron-withdrawing atoms in the carboxyl group, the more stable the resonance structure and therefore the stronger the acid. Water and ethyl alcohol esters, on the other hand, have less electron-withdrawing atoms, so their conjugate base is not as stable and their acidity is less than that of carboxylic acids.

Additionally, carboxylic acids tend to have smaller molecules than water or ethyl alcohol esters. This means that their conjugate base will have a stronger interaction with the proton and therefore the acid is stronger. In contrast, water and ethyl alcohol esters are larger molecules and their conjugate base is less capable of stabilizing the proton and thus making the acid less acidic.  

Know more about Carboxylic acids here:

https://brainly.com/question/4721247

#SPJ11

Answer: 16

Explanation: Hence, the mass number of an oxygen atom = 8 + 8 = 16.

The coefficient that goes in front of the ECA in the chemical reaction given above is 2.

It has been indicated that coefficient in a chemical reaction is a number that goes in front of an element or compound in a balanced equation. The unbalanced chemical equation for the given reaction is:

[tex]E_{3} BC_{4} D(CA)_{2}[/tex]  → [tex]D_{3} (BC_{4} ) ECA[/tex]

The balanced equation of the chemical reaction above is:

[tex]2E_{3} BC_{4} D(CA)_{2}[/tex]  → [tex]D_{3} (BC_{4} )_{2} ECA[/tex]

We can see that 2 comes before ECA in the balanced chemical equation above. Therefore, the coefficient that goes in front of the ECA in the chemical reaction given above is 2.

More on chemical reaction coefficient: https://brainly.com/question/31143822

#SPJ11

The correct equation that correctly represents the chemical equation associated with the enthalpy of the formation of nitrogen dioxide gas is "½ N2(g) + O2(g) → NO2(g)".

Nitrogen dioxide is a chemical compound with the chemical formula NO2. It is a gas with a sharp, biting odor and is a prominent air pollutant. It is one of the principal oxides of nitrogen.

The enthalpy of formation (ΔHf°) of nitrogen dioxide gas, NO2, is 33.8 kJ/mol. Enthalpy of formation is defined as the amount of energy liberated or absorbed when a compound is formed from its constituent elements under standard conditions.

Here, ½ N2(g) + O2(g) → NO2(g) is the equation that correctly represents the chemical equation associated with this enthalpy of formation. The energy absorbed or released in the formation of one mole of nitrogen dioxide from 1/2 mole of nitrogen gas and one mole of oxygen gas is 33.8 kJ/mol.

You can learn more about enthalpy of formation at: brainly.com/question/14563374

#SPJ11

A scientist dilutes 50.0 ml of a pH 5.85 solution of HCl to 1.00 L. The pH of the diluted solution (Kw = 1.0 × 10-14) is approximately 1.85.

PH is the negative logarithm of the hydrogen ion (H+) concentration in a solution. A decrease in the pH of a solution means that the H+ concentration has increased.

The following formula can be used to calculate the pH of a solution:

pH = -log[H+]

The number of hydrogen ions per liter of solution is referred to as the hydrogen ion concentration [H+]. In addition, the hydroxide ion (OH-) concentration may be calculated using the following formula:

[H+] [OH-] = 1.0 × 10-14

The pH of the solution can be calculated using the equation given below:

5.85 = -log[H+]5.85 = -log[H+]H+ = 1.38 x 10-6

The number of moles of HCl in 50 mL of a 5.85 pH solution is 0.00138 mol. The number of moles of HCl after dilution to 1.00 L can be determined using the equation below:

n1V1 = n2V2

0.00138 mol x 50 ml = n2 x 1.00 LN2 = 0.0000276 mol

After dilution, the HCl concentration is 0.0000276 moles/liter. The hydroxide ion concentration [OH-] in the solution can be determined using the formula given below:

[H+] [OH-] = 1.0 × 10-140.0000276 [OH-] = 1.0 × 10-14[OH-] = 3.6 x 10-10 mol/L

The pH of the solution can be calculated using the equation given below:

pH = -log[H+]pH = -log(3.6 × 10-10)pH = 9.44

The pH of the diluted solution (Kw = 1.0 × 10-14) is approximately 1.85.

Learn more about the pH of a solution at brainly.com/question/30934747

#SPJ11

The statement "enzymes reduce entropy of their substrates in reactions with multiple reactants" is possible because enzymes lower the activation energy of chemical reactions.

Enzymes are biocatalysts that are produced by living organisms. They can increase the rate of chemical reactions without being consumed during the process. Enzymes are proteins made up of chains of amino acids, and their function is determined by their three-dimensional shape.

Enzymes reduce the entropy of their substrates in reactions with multiple reactants. This is possible because they lower the activation energy of chemical reactions. By lowering the activation energy, enzymes make it easier for the reactants to react with one another. Enzymes make chemical reactions more efficient and faster than they would be without the enzyme.

The Arrhenius equation shows the dependence of the rate constant of a chemical reaction on the temperature, activation energy, and frequency factor. The frequency factor represents the frequency at which reactant molecules collide and produce products. When enzymes are present, the activation energy required for the chemical reaction is lowered, making the frequency factor and the rate constant of the reaction higher. This leads to an increase in the rate of the chemical reaction.

The equation is given as; k = Ae-Ea/RT,

Where

Learn more about enzymes: https://brainly.com/question/1596855

#SPJ11

When we say that liquid water is unstable on Mars, we mean that any liquid water on the surface would quickly either freeze or evaporate. The correct option is c.

Mars is the fourth planet from the sun in the Solar System, with a diameter of around 6,779 kilometers (4,212 miles) and a day length of around 24.6 hours. It's also known as the Red Planet because of its reddish appearance. It is a terrestrial planet, which means that it is similar in structure and composition to Earth.The temperature on Mars:The temperature on Mars can be as cold as -143 degrees Celsius and as high as 35 degrees

Mars also has a very low atmospheric pressure, making it difficult for humans to live on the planet. "Water is a vital component for life as we know it, but it is also a challenging molecule to handle becau'se of its complicated properties. On Mars, the presence of water is vital to determining whether or not the planet could have supported life in the past, now, or in the future. Therefore, the correct option is c.

Know more about atmospheric pressure here:

https://brainly.com/question/30166820

#SPJ11

Strong acid: H₂SO₄

Weak acid: H₂SO₃, HCN

Strong base: Sr(OH)₂, LiOH

Weak base: NH₃, H₂S

Acids are chemical compounds that, when dissolved in water, release hydrogen ions (H+). Their sour taste, capacity to make litmus paper red, and propensity to combine with bases to produce salts and water are what distinguish them. Depending on how much an acid dissociates in water, it can be characterised as either a strong or weak acid.

In water, strong acids like sulfuric and hydrochloric acid totally dissociate to create H+ ions and anions. In water, weak acids like acetic acid and carbonic acid only partially dissociate.

Acids play an important role in many chemical reactions and are used in various applications such as food and beverage processing, pharmaceuticals, and cleaning agents.

Learn more about acid here:

https://brainly.com/question/14072179

#SPJ4

The compound that behaves as an acid when dissolved in water is HI (hydrogen iodide). Thus, the correct option will be D.

HI is an Arrhenius acid, meaning it produces hydrogen ions (H⁺) in aqueous solution. The compound that behaves as an acid when dissolved in the water Hydrogen iodide (HI). HI is a diatomic molecule and a colorless gas at room temperature.

Hydrogen iodide is a strong acid when dissolved in water, with a pKa of −10. Hydrogen iodide is also used as a reducing agent in organic chemistry in the production of iodinated compounds.

Learn more about Acids here:

https://brainly.com/question/29796621

#SPJ11

Testing more samples from each location would improve the reliability of the engineers' measurements.

The correct option is D

By increasing the number of samples tested, the engineers can obtain a more accurate representation of the porosity of the material in question. This can help to account for any variation or outliers in the data, which can improve the reliability of the results. Using a different liquid or different containers may affect the results but may not necessarily improve reliability. Testing single samples from more than three locations may provide more information but may not necessarily improve reliability if the samples are not representative of the overall population.

To know more about reliability click here:

brainly.com/question/30154360

#SPJ4

It is important to keep the electrodes in a fixed relative position during electrolysis as it affects the current that passes through the solution.

For example, if the electrodes are placed too close together, the current will be too strong and can cause damage to the system. Additionally, having the electrodes in a parallel position ensures that the current flows evenly through the entire solution. This is because having the electrodes parallel helps to ensure that the current flows in the same direction and not at different angles. This helps to keep the current steady and prevents hot spots or localized over-voltage. In conclusion, it is necessary to keep the electrodes in a fixed relative position, parallel to each other, during electrolysis to ensure the current is distributed evenly and not too strong.

For more questions on electrolysis

https://brainly.com/question/12994141

#SPJ11

The breakdown of 6.54 g of potassium chlorate results in the production of 4.81 x [tex]10^{22}[/tex]oxygen molecules.

The balanced chemical equation for the decomposition of potassium chlorate is:

2 KClO3(s) → 2 KCl(s) + 3 O2(g)

This equation tells us that for every 2 moles of potassium chlorate that decompose, 3 moles of oxygen gas are produced.

To determine the number of molecules of oxygen produced by the decomposition of 6.54 g of potassium chlorate, we first need to convert the mass of potassium chlorate to moles using its molar mass. The molar mass of KCLO₃ is:

K: 39.10 g/mol

Cl: 35.45 g/mol

O: 3(16.00 g/mol) = 48.00 g/mol

Total molar mass of KCLO₃: 39.10 + 3(35.45) + 48.00 = 122.55 g/mol

Number of moles of KCLO₃ = 6.54 g / 122.55 g/mol = 0.0533 mol

Now we can use the mole ratio from the balanced equation to calculate the number of moles of oxygen produced:

3 moles O₂ / 2 moles KCLO₃ = x moles O₂ / 0.0533 moles KCLO₃

x = 3/2 x 0.0533 = 0.0799 moles O₂

Finally, we can convert the number of moles of oxygen to the number of molecules using Avogadro's number:

Number of molecules of O2 = 0.0799 mol x 6.022 x [tex]10^{23}[/tex] molecules/mol = 4.81 x [tex]10^{22}[/tex] molecules

Therefore, 4.81 x [tex]10^{22}[/tex] molecules of oxygen are produced by the decomposition of 6.54 g of potassium chlorate.

To learn more about  molecules  refer to:

brainly.com/question/14646440

#SPJ4

The chemical formula of 4- ethyl is C19H40.   This  patch is composed of an ethyl group( C2H5) attached to the fourth carbon  snippet( counting from one end) of a direct carbon chain.

It also has a propyl group( C3H7) attached to the fifth carbon  snippet of the same chain. The chain itself has 12 carbon  tittles and three methyl groups(- CH3) attached to the 3rd, 4th, and 7th carbon  tittles. thus, the complete name of the  emulsion is 4- ethyl, where" dodecane" refers to the 12- carbon chain.

This  patch belongs to the class of alkanes, which are hydrocarbons that only contain single bonds between carbon  tittles. The presence of the ethyl and propyl groups creates branching in the carbon chain, which can affect its physical and chemical  parcels compared to a direct alkane with the same number of carbon  tittles. The three methyl groups contribute to the  patch's overall shape and may also affect its reactivity.

Learn more about chemical formula at

https://brainly.com/question/12484831

#SPJ4

The question in english language is as follows:

What is the formula of 4-ethyl-5-propyl-3,4,7-trimethyldecane?

Answer: The law was applicable only to calcium. It could not include other elements beyond calcium.  With the discovery of rare gases, it was the ninth element and not the eighth element having similar chemical properties.

Explanation:

YOUR WELCOME

The pKa will be higher in the unknown acid solution. The pH of the unknown acids would not be affected by several drops of NaOH solution.

The pKa of the unknown acid would be higher if the pH meter was incorrectly calibrated to read lower than the actual pH. This is because if the pH meter reads lower than the actual pH, the measured pH would be lower than the actual pH.

As pKa is the negative logarithm of the acid dissociation constant, Ka, which is directly proportional to the hydrogen ion concentration, [H⁺], a decrease in the measured pH would lead to a decrease in the measured [H⁺]. Since:

pKa = -log Ka = -log [H⁺] + log [HA], a decrease in [H⁺] would lead to an increase in pKa.

The pKa of the unknown acid would not be affected if several drops of NaOH missed the reaction beaker and fell onto the bench top. This is because the number of moles of NaOH that react with the unknown acid is not affected by the drops that miss the beaker.

The number of moles of NaOH that react with the unknown acid is determined by the volume and the concentration of NaOH added to the beaker and the volume and the concentration of the unknown acid in the beaker. Therefore, the pKa would remain the same.

The pKa of the unknown acid would not be affected if acid was dissolved in 75 mL of distilled water rather than 50 mL of distilled water. This is because the pKa of an acid is an intrinsic property that is independent of the amount of the acid. The pKa is determined by the acid itself, not by the amount of acid. Therefore, the pKa would remain the same.

Learn more about pH here:

https://brainly.com/question/31035487

#SPJ11

Answer:

Gravity helps move water into the ground.

Methanol, or CH3OH, is a Brnsted-Lowry base in this reaction because it can receive a proton from the hydroxide ion, or OH-, to generate CH3O- (methoxide ion).

The Brnsted-Lowry base OH- (hydroxide ion), on the other hand, may transfer a proton (H+) to[tex]CH3OH[/tex]to create H2O. (water).So the reactants are CH3OH (base) and OH- (base), and the products are CH3O- (conjugate base of CH3OH) and H2O (conjugate acid of OH-).I apologize for the mistake in my previous response. You are correct that methanol, or CH3OH, is a Brønsted-Lowry acid in this reaction because it donates a proton (H+) to the hydroxide ion (OH-) to form CH3O- (methoxide ion). The hydroxide ion (OH-) is a Brønsted-Lowry base because it accepts a proton (H+) from CH3OH to form H2O (water). Therefore, the reactants are [tex]CH3OH[/tex]  (acid) and OH- (base), and the products are CH3O- (conjugate base of CH3OH) and H2O (conjugate acid of OH-).

learn more about Methanol, or CH3OH here:

https://brainly.com/question/14278895

#SPJ4

The  molecule that is the main product of the Calvin cycle is glucose. The Calvin cycle is also known as the light-independent reactions.

It is a series of biochemical reactions that occur in the stroma of the chloroplast in photosynthetic organisms to produce glucose. The Calvin cycle is made up of three stages: Carbon fixation, Reduction and regeneration of ribulose bisphosphate. Here's a breakdown of each stage:

Carbon fixation: Carbon dioxide enters the Calvin cycle and is converted to organic molecules. During carbon fixation, Rubisco, which is a crucial enzyme in photosynthesis, catalyzes the reaction between carbon dioxide and ribulose bisphosphate, leading to the formation of a six-carbon molecule that splits into two three-carbon molecules. This three-carbon molecule is the starting material for the reduction process.

Reduction: The ATP and NADPH produced during the light-dependent reactions are used to convert the three-carbon molecule produced during carbon fixation into glyceraldehyde-3-phosphate. This process involves a series of biochemical reactions that require the use of energy from ATP and electrons from NADPH.

Regeneration of ribulose bisphosphate: Glyceraldehyde-3-phosphate, which is the main product of the Calvin cycle, is used to regenerate the starting material for carbon fixation, ribulose bisphosphate. During this stage, ATP is used to convert the remaining glyceraldehyde-3-phosphate molecules into ribulose bisphosphate. The Calvin cycle is an essential process in photosynthesis, as it produces glucose, which is the main source of energy for plants and other photosynthetic organisms.

For more such questions on glucose , Visit:

https://brainly.com/question/397060

#SPJ11

Charged ions such as sodium, potassium, and chloride are called electrolytes.

Ions are atoms or molecules that have a positive or negative charge. They develop an electrical charge when an atom or molecule gains or loses one or more electrons, becoming an ion. Cations are ions with a positive charge, whereas anions are ions with a negative charge. The conductivity of fluids is due to charged ions like electrolytes.

Sodium, potassium, chloride, bicarbonate, calcium, and phosphate are examples of electrolytes that are vital for the body's daily function. Electrolytes play a significant role in maintaining the correct water balance and assisting in the transmission of electric impulses across cells.

For more such questions on electrolytes, click on:

https://brainly.com/question/17089766

#SPJ11

The density of the liquid is 0.562 g/mL, the volume in milliliters is about 1.59 mL, and the mass of 0.285mL sample is about 0.224 grams.

The formula for density is as follows:

Density = mass/volume

Density = 0.155 g/0.000275 L= 562.1 g/L

We know that, 1 L = 1000 mL

So, Density = 562.1 g/L × 1 L/1000 mL= 0.562 g/mL

The density of the given liquid is 0.562 g/mL.

Density = mass/volume

Rearranging the above formula we get,

Volume = mass/density

Density = 3.03 g/mL, Mass = 4.83 g

Volume = 4.83 g/3.03 g/mL= 1.59 mL

Therefore, the volume in milliliters of a 4.83 g sample of a solid with a density of 3.03 g/mL is 1.59 mL.

Mass = density × volume

M = D × V

Density = 0.789 g/mL, Volume = 0.285 mL

Mass = 0.789 g/mL × 0.285 mL= 0.224 g

Therefore, the mass of a 0.285-mL sample of a liquid with density 0.789 g/mL is 0.224 g.

Learn more about Density here:

https://brainly.com/question/29775886

#SPJ11

The compound that will readily react with the solution of bromine resulting from the mixture of hydrobromic acid and hydrogen peroxide is option (a) Cyclohexene.

A solution is a specific kind of homogenous mixture made up of two or more components that is used in chemistry. A solute is a substance that has been dissolved in a solvent, which is the other substance in the mixture.

Free bromine (Br2), a potent electrophilic and oxidizing agent, can be produced in situ by mixing hydrobromic acid (HBr) and hydrogen peroxide (H2O2). So, we must choose a substance that Br2 can easily react with in these circumstances.

Cyclohexene, one of the provided compounds, is an unsaturated double-bonded molecule that can go through electrophilic addition processes. With alkenes like cyclohexene, bromine easily engages in an electrophilic addition process to generate a dibromoalkane.

Hence, option (a) cyclohexene is the substance that will most rapidly react with the bromine solution produced by the mixture of hydrobromic acid and hydrogen peroxide.

Learn more about mixtures on:

https://brainly.com/question/24647756

#SPJ11

A compound that is defined by its ability to produce hydroxide ions when dissolved in water is known as a base.

Bases are compounds that dissolve in water to form hydroxide ions (OH-). They are hydroxide ion donors, to be precise. Bases have a pH value greater than 7. The OH- ions are released when bases are dissolved in water. Sodium hydroxide (NaOH) is a good example of a base.

When NaOH is dissolved in water, it produces hydroxide ions (OH-) and sodium ions (Na+). As a result, the solution is more basic, and the pH is greater than 7. The following are some examples of bases:

Bases are commonly utilized in several chemical reactions. They're utilized as pH modifiers, reagents, and buffer solutions, among other things. They are also used in industries like cosmetics, detergents, and food. Furthermore, they are utilized in water treatment plants to control acidity levels and remove impurities.

Therefore, a compound that is defined by its ability to produce hydroxide ions when dissolved in water is known as a base.

To know more about hydroxide ions click here:

https://brainly.com/question/14619642

#SPJ11

The technique of bioremediation involves using local microorganisms to absorb or degrade different parts of spilled oil in maritime environments.

Bacteria can be utilised to remediate oil spills in the marine through bioremediation. Hydrocarbons, which are found in oil and gasoline, are one type of specialised contamination that can be bioremediated using particular bacteria.

As a result of bioremediation, there is no longer a need to collect and shift the harmful substances to another location because natural organisms may convert the toxic molecules into harmless simple molecules (Venosa).

To know more about absorb visit:

https://brainly.com/question/30867928

#SPJ1

The curve will have the points (0, 8.04), (halfway, 8.04), (equivalence point, 8.04), and (endpoint, 14). The points can then be connected to create a graph of the pH over the course of the titration.

At the start of the titration, before any KOH has been added, the concentration of HBrO is 0.200 M and the concentration of KOH is 0.000 M, so the pH can be calculated as:

pH = 8.04 + log ([0.000]/[0.200]) = 8.04 + log (0) = 8.04.

When the equivalence point is reached, the concentrations of the two reactants are equal, so the pH can be calculated as:

pH = 8.04 + log ([0.200]/[0.200]) = 8.04 + log (1) = 8.04.

At the end of the titration, when all of the KOH has been added, the concentration of KOH is 0.140 M and the concentration of HBrO is 0.000 M, so the pH can be calculated as:

pH = 14 + log ([0.140]/[0.000]) = 14 + log (infinity) = 14.

Using these four points, a titration curve can be drawn to represent the pH of the solution throughout the titration. The curve will have the points (0, 8.04), (halfway, 8.04), (equivalence point, 8.04), and (endpoint, 14). The points can then be connected to create a graph of the pH over the course of the titration.

Learn more about pH: brainly.com/question/172153

#SPJ11