Which is an example of Conduction?
A Warm air rising, cooling at high temperatures, and then falling back to lower elevations.
B Warming your hands by a fire.
C The sun warming your face
D Burning your mouth on a hot spoon

Answers

Answer 1

Burning your mouth on a hot spoon(option D) is an example of heat transfer through conduction, as the spoon is in direct contact with your mouth.

What is conduction?

Conduction is the transfer of heat or electrical energy between two objects that are in direct contact with each other, or between two parts of the same object that are at different temperatures.

In conduction, the energy transfer occurs due to the collision of molecules in the objects or materials. When two objects are in contact, the molecules of the warmer object vibrate more rapidly, colliding with the molecules of the cooler object, which have less energy.

These collisions transfer thermal energy from the warmer object to the cooler object, until both objects reach the same temperature.

Learn about conduction here https://brainly.com/question/20493362

#SPJ1


Related Questions

We know that Paz is trying to produce ammonia (NH3) from thin air. From looking at the experimental set-up, what are the reactants? a) NO2 and H20 b) N2 and H2 c) NO2 and H2 d) N2 and H20

Answers

To produce ammonia (NH₃) from thin air, the reactants required are N₂ and H₂. So the correct option is b).

Give a brief account on production of ammonia.

Ammonia is one of the most abundantly produced inorganic chemicals. In 2016, there are a number of large ammonia plants around the world that produced a total of 144 million tons of nitrogen (equivalent to 175 million tons of ammonia). That number will rise to 235 million tonnes of ammonia in 2021. China produced 31.9% of its global production, followed by Russia at 8.7%, India at 7.5% and the United States at 7.1%. More than 80% of the ammonia produced is used as fertilizer for agricultural crops.

Today, most ammonia is produced on a large scale using the Haber process, with capacities of up to 3,300 tons per day. Gases N₂ and H₂ are reacted at a pressure of 200 bar. A typical modern ammonia production plant first converts natural gas, LPG, or petroleum gas into gaseous hydrogen. The process of producing hydrogen from hydrocarbons is known as steam reforming. Hydrogen then combines with nitrogen to produce ammonia by the Haber-Bosch process.

One way to produce green ammonia is to use hydrogen from the electrolysis of water and nitrogen separated from air. These are fed into the Haber Process (aka Haber-Bosch), all of which produce sustainable power.

To know more about Haber process, visit:

https://brainly.com/question/26667299

#SPJ1

1. Choose the atom with the larger first ionization energy.

Select one:

a. Titanium
b. Manganese


2. Choose the atom with the larger first ionization energy.

Select one:

a. Silicon
b. Tin

Answers

The atom with the larger first ionization energy is Titanium. Option a.

The atom with the larger first ionization energy is Tin. Option b.

Ionization and ionization energy

Ionization is the process of removing one or more electrons from an atom or molecule, resulting in the formation of an ion. This can be achieved through a variety of methods, such as exposure to high-energy radiation or contact with other charged particles.

Ionization energy is the amount of energy required to remove an electron from a neutral atom or molecule, resulting in the formation of a positively charged ion. This energy is typically measured in electron volts (eV) or kilojoules per mole (kJ/mol), and varies depending on the identity of the atom or molecule and the electronic configuration of its valence shell. Ionization energy is an important property of atoms and molecules, as it can provide insight into their reactivity and chemical behavior.

Learn more on ionization energy here https://brainly.com/question/20658080

#SPJ1

given the atomic mass of hydrogen is 1 amu, the atomic mass of oxygen is 16 amu, and one molecule of sulfuric acid has a mass of 98 amu, what is the atomic mass of sulfur trioxide?

Answers

The atomic mass of sulfur trioxide (SO3) is 82 amu.

How to find the atomic mass of sulfur trioxide ?

Sulfur trioxide (SO3) has one sulfur atom and three oxygen atoms.

The atomic mass of sulfur can be calculated by subtracting the total mass of the oxygen atoms in sulfuric acid (3 x 16 amu) from the mass of sulfuric acid (98 amu) and then subtracting the mass of the remaining oxygen atom:

Mass of sulfur = (98 amu - 3 x 16 amu) - 1 x 16 amuMass of sulfur = (98 amu - 48 amu) - 16 amuMass of sulfur = 34 amu

The atomic mass of sulfur is 34 amu.

To find the atomic mass of sulfur trioxide, we add the atomic masses of one sulfur atom and three oxygen atoms:

Atomic mass of SO3 = 1 x 34 amu + 3 x 16 amuAtomic mass of SO3 = 34 amu + 48 amuAtomic mass of SO3 = 82 amu

Therefore, the atomic mass of sulfur trioxide (SO3) is 82 amu.

Learn more about sulfur trioxide here : brainly.com/question/1458186

#SPJ1

the electron configuration of nitrogen is 1s^2 2s^2 2p^3. how many electrons are present in an atom of nitrogen? what is the atomic number for nitrogen?

Answers

Since the electronic configuration of nitrogen is 1s² 2s² 2p³, the number of electrons present in the nitrogen atom is 7, and the atomic number of nitrogen is also seven (7).

The atomic number of an atom is the number of protons in the nucleus of an atom. The number of protons defines the properties of an element. For example, if an element with 5 protons is boron atom.

The electronic configuration of an atom represents the number of electrons in each sub-energy level of the atom in the ground state.

The electronic configuration of nitrogen is 1s²2s²2p³. As you know, the electrons around the nucleus are located in energies or levels. Therefore, from the definition of electron configuration, we can say that the nitrogen atom has 2 electrons in the first energy level K of the s-subshell, and in the s-subshell and the p subshell of the second energy level L, respectively There are 2 or 3 electrons.

Therefore, the total number of electrons in the nitrogen atom is 7 (2 + 2 + 3). We know that the number of protons = the number of electrons, so the number of protons in the nitrogen nucleus is 7. Therefore, the nitrogen atom has an atomic number of 7.

For more information about electronic configuration, visit :

https://brainly.com/question/21977349

#SPJ4

Consider the reaction between aqueous solutions of potassium hydroxide and chromium (III) chloride. Based on your balanced equation for this reaction, answer the following questions: 1) What are the spectator ions in this reaction? and 2) What is the formula for the precipitate formed in this reaction? 3) What is the sum of all the coefficients in the net ionic equation for this reaction? Net lonic Equati....pdf Hydrocarbon C....pdf

Answers

The net ionic equation for the given reaction is: 1 Cr3+(aq) + 3OH-(aq) → Cr(OH)3(s)

2. The formula for the precipitate formed in this reaction is Cr(OH)3.

3. The sum of all coefficients in the net ionic equation is 4.

Consider the reaction between aqueous solutions of potassium hydroxide and chromium (III) chloride. The balanced chemical equation for the given reaction is:KOH(aq) + CrCl3(aq) → KCl(aq) + Cr(OH)3(s)1) Spectator ionsThe ions that do not take part in the reaction are known as spectator ions.

These ions are present on both sides of the equation without undergoing any chemical changes.The ionic equation for the given reaction is:3K+(aq) + 3OH-(aq) + Cr3+(aq) + 3Cl-(aq) → 3K+(aq) + 3Cl-(aq) + Cr(OH)3(s)The spectator ions are K+ and Cl-.2)

PrecipitateThe precipitate is formed when the two reactants are combined together, and it can be identified from the ionic equation. In this reaction, the precipitate is formed when KOH is added to the aqueous solution of chromium(III) chloride.The formula for the precipitate formed in this reaction is Cr(OH)3.3) Sum of all coefficientsThe net ionic equation represents the actual chemical change occurring in the reaction.

The spectator ions are removed, and only the ions that participate in the reaction are shown. The net ionic equation for the given reaction is:Cr3+(aq) + 3OH-(aq) → Cr(OH)3(s)The sum of all coefficients in the net ionic equation is 4.

For more such questions on ionic equation

https://brainly.com/question/25604204

#SPJ11

match each substance correctly to the principal type(s) of intermolecular force(s) present, other than covalent bonding.

Answers

Substance       intermolecular force

CH2OH   --->   Hydrogen bonding

CH3F       -->    Dipole-dipole forces

C3H8       -->    Dispersion forces

CaCL2      -->   Ionic bonding

The intermolecular force present in CH2OH is hydrogen bonding. The intermolecular force present in CH3F is  Dipole-dipole forces. Ionic bonding is defined as a type of chemical bonding that involves the electrostatic attraction between oppositely charged ions or between two atoms with sharply different electronegativities. It is the primary interaction occurring in ionic compounds. Hydrogen bonding results from the attractive force between a hydrogen atom covalently bonded to a very electronegative atom such as a N, O, or F atom and another very electronegative atom.

Dipole-dipole forces are defined as a attractive forces between the positive end of one polar molecule and the negative end of another polar molecule.  Dispersion force is defined as a temporary attractive force that results when the electrons in two adjacent atoms occupy positions that make the atoms form temporary dipoles.

To learn more about Intermolecular forces

https://brainly.com/question/12243368

#SPJ4

The complete question is,

Match each substance correctly to the principal type(s) of intermolecular force(s) present, other than covalent bonding.

CH2OH          Ionic bonding

CH3F              Hydrogen bonding

C3H8              Dispersion forces

CaCL2            Dipole-dipole forces

Q10. Hydrocarbon molecules can react with halogens like Cl2 or Br2 (represented generically by X2) where C-H bonds are replaced by C-X bonds, forming HX molecules in the process. Balance the following chemical reaction and compute the estimated heat of reaction using the values above.
C3H8(g) + X2(g) → C3H2X6(g) + HX (g)
You are given the following average bond energies:
H-H 436 kJ/mol
H-X 431 kJ/mol
H-C 414 kJ/mol
C-X 339 kJ/mol
X-X 243 kJ/mol

Answers

Answer: To balance the given chemical equation, we can start by counting the number of atoms on both sides of the equation. We have 3 carbon atoms and 8 hydrogen atoms on the left side, and 3 carbon atoms, 6 X atoms, and 1 hydrogen atom on the right side.

C3H8(g) + X2(g) → C3H2X6(g) + HX(g)

To balance the equation, we can add a coefficient of 3 in front of HX on the product side:

C3H8(g) + X2(g) → C3H2X6(g) + 3HX(g)

Now, we have the same number of H atoms on both sides (8 H atoms on each side), and the equation is balanced.

To estimate the heat of reaction, we can use the bond energy values to calculate the energy required to break the bonds in the reactants and the energy released by forming the bonds in the products. We can then subtract the energy required to break the bonds from the energy released by forming the bonds to obtain an estimate of the heat of reaction.

Breaking bonds in the reactants:

3 C-H bonds × 414 kJ/mol = 1242 kJ/mol

1 X-X bond × 243 kJ/mol = 243 kJ/mol

Forming bonds in the products:

6 C-X bonds × 339 kJ/mol = 2034 kJ/mol

1 C-H bond × 414 kJ/mol = 414 kJ/mol

3 H-X bonds × 431 kJ/mol = 1293 kJ/mol

Estimated heat of reaction:

Energy released - energy required

(2034 kJ/mol + 414 kJ/mol + 1293 kJ/mol) - (1242 kJ/mol + 243 kJ/mol) = 2756 kJ/mol

Therefore, the estimated heat of reaction for the given chemical equation is 2756 kJ/mol. Note that this is only an estimate and actual experimental values may differ due to factors such as reaction conditions and the presence of catalysts.

The SI unit of pressure is the _______.
The boiling point of water is _______ on Mount McKinley than the boiling point of water in NYC.
At lower elevations, atmospheric pressure _______ compared to higher elevations.
Standard atmosphere or standard atmospheric pressure is equal to _______ Pa.

Answers

The SI unit of pressure is the Pascal (Pa).

The boiling point of water is lower on Mount McKinley than the boiling point of water in NYC.

What is Pressure?

Pressure is defined as the amount of force applied perpendicular to the surface of an object per unit area over which that force is distributed. In other words, it is the force per unit area that an object exerts on another object. Pressure can be measured in various units such as pascal (Pa), bar, pounds per square inch (psi), and atmospheres (atm), among others. It is an important concept in physics and is used to describe many phenomena, including fluid dynamics, weather patterns, and even the behavior of gases in space.

At lower elevations, atmospheric pressure is higher compared to higher elevations.

Standard atmosphere or standard atmospheric pressure is equal to 101325 Pa.

Learn more about Pressure from given link

https://brainly.com/question/28012687

#SPJ1

please answer the question for BRAINLIEST asap

Using the formula M1V1 = M2V2 , if I add water to 100.0 mL of a 0.15 M NaOH solution until the final volume is 150 mL, what will the molarity of the diluted solution be?
Question 3 options:

0.23M


1.0M


0.10M


1.0E5M

Answers

Answer:

M2= 0,1 M

Explanation:

M1=0,15 M

V1= 100 mL =0,1 L

M2= ?

V2= 150 mL = 0,15 L

M1V1= M2V2

(0,15 mol/L) (0,1 L) = M2 (0,15 L)

0,015 mol / 0,15 L = M2

M2= 0,1 M

THEORY 1. illustrate the formation of the Compound AIC 13 Electron dot representation. ​

Answers

The electron representation shows the electrons in the atoms as dots as in the image attached.

What is electron dot representation?

An electron dot representation, also known as a Lewis dot structure or electron dot diagram, is a way of representing the valence electrons of an atom using dots around the symbol of the element.

Valence electrons are the outermost electrons of an atom, and they play an important role in chemical bonding. The electron dot representation shows the valence electrons as dots around the symbol of the element, with each dot representing one valence electron.

Learn more about electron dot:https://brainly.com/question/25929171

#SPJ1

what does 2NaOH equal

Answers

2NaOH represents the chemical formula for sodium hydroxide.

When a mineral breaks along a weekly bonded plane it is called

Answers

Answer: Cleavage


Explanation:

When a mineral breaks along a weekly bonded plane it is called cleavage

use the trendline equation in fig6.2 to determine the kelvin temperature at which the pressure equals .72 atm

Answers

When the pressure is 0.72 atm, the temperature in Kelvin is 156 K.

To determine the Kelvin temperature when the pressure is 0.72 atm, you will need to use the trendline equation given in Fig 6.2. First, find the equation of the trendline by using the graph's two points, (300 K, 1 atm) and (500 K, 2 atm).

The equation for the trendline is:

y = mx + b

Where y is pressure, x is the temperature in Kelvin, m is the slope, and b is the y-intercept. We can find the slope of the trendline by using the two points provided in the graph:

Slope (m) = (y2 - y1) / (x2 - x1)

Slope = (2 atm - 1 atm) / (500 K - 300 K)

Slope = 0.005 atm/K

The equation for the trendline can now be written: y = 0.005x + b. To find the y-intercept, b, we can use one of the two points: Solving for b:

1 atm = 0.005(300 K) + bb = 1.5 atm

Now we can use the equation for the trendline to find the temperature (x) at which the pressure (y) equals 0.72 atm:

0.72 atm = 0.005x + 1.5 atm

0.72 atm - 1.5 atm = 0.005x

-0.78 atm = 0.005xx

= -0.78 atm / 0.005x

= 156K

To learn more about Pressure :

https://brainly.com/question/24719118

#SPJ11

If this sample “unlabelled graph” were used from this experiment - how could we label each portion of the graph? What type of relationship do we see?

Answers

Typically, you must identify the x- and y-axes, which represent the two variables being measured or compared, in order to label a graph.

How can you identify Variables in graph?

The graph's shape must be examined in order to determine the type of relationship between the variables. The relationship is considered to be linear if the graph depicts a straight line. The relationship is non-linear if the graph shows a curve. To determine whether the relationship is positive or negative, you would also need to look at the line's slope and direction. The relationship is positive if the line slopes upwards from left to right; this indicates that as one variable rises, so does the other. The relationship is negative if the line slopes downward from left to right, indicating that one variable increases while the other decreases.

To know more about Variables, visit:

https://brainly.com/question/17344045

#SPJ1

What is the name in a position called

Answers

The names of the positions are called:

(1) (10) Atomic number

(2) (11) Chemical symbols

(3) (12) Elements

(4) (13) Atomic mass

What is an atomic structure?

Atomic structure refers to the composition and arrangement of subatomic particles within an atom. An atom consists of a central nucleus, which contains positively charged protons and uncharged neutrons, surrounded by negatively charged electrons that move around the nucleus in shells or energy levels.

The number of protons in the nucleus determines the atomic number and thus the identity of the element. The arrangement of electrons around the nucleus determines the chemical and physical properties of the element.

Learn more on atomic structure here: https://brainly.com/question/21289019

#SPJ1

The questions are:

10 What is the name for the number in this position called? (the answer is not "6") →6

11 What is the name for the letter in this position called? (the answer is not "C"!) →C

12 What is the name in this position called? (the answer is not "Carbon"!) →Carbon

13

What is the name for the number in this position? (the answer is not "12.0") →12.0

Use the spaces below to type your answers to the questions above.

structural change from a myoglobin tertiary structure to the inclusion of quaternary structure for hemoglobin

Answers

The quaternary structure of hemoglobin is responsible for the increased oxygen-carrying capacity and stability of the molecule. This structure allows hemoglobin to better transport oxygen throughout the body and is essential to life.

The structural change from myoglobin to hemoglobin includes an additional quaternary structure, which is the arrangement of two or more myoglobin subunits into a single, functional entity. This structural change allows for the cooperative binding of oxygen, meaning that the hemoglobin molecule can carry more oxygen than a single myoglobin molecule can. This is due to the increased surface area of the hemoglobin molecule, which provides more oxygen-binding sites. Additionally, the quaternary structure of hemoglobin increases the stability of the molecule, meaning it can better resist changes in pH or temperature. This is important because it allows hemoglobin to function in the wide range of temperatures and environments that are found within the human body.  

To learn more about Hemoglobin :

https://brainly.com/question/11102357

#SPJ11

Which of the following molecules is drawn in a conformation that has a proton and a leaving group anti-periplanar? H₂C, Br Ph. H CH3 Br H H₂C Br H₂C Ph H₂C CH3 H Ph H₂C, Br H Ph Save for Later CH3 CH3 CH3 CH3 CH3 Sul

Answers

The molecule that is drawn in a conformation that has a proton and a leaving group anti-periplanar is H₂C, Br.

The A, B, C, and D bond angles of a molecule are referred to as anti-periplanar, or antiperiplanar, in organic chemistry. The dihedral angles of the A–B and C–D bonds in this conformer are larger than +150° or less than 150°. In textbooks, the term "anti-periplanar" is frequently used to refer to a strictly anti-coplanar structure with a 180° AB CD dihedral angle. The anti-periplanar functional groups will be 180° apart from one another and in a staggered configuration in a Newman projection of the molecule.  

Conformation is an essential factor in predicting reactivity in organic molecules. The anti-periplanar conformation of a molecule is one that occurs when two atoms in a molecule are in the same plane and are separated by 180 degrees. In this case, the proton and leaving group are placed in a perpendicular plane to the atoms directly in between them. This is the most stable conformer of the molecule. A significant factor in predicting reactivity in organic molecules is conformation. In this case, the molecule H₂C, Br is drawn in a conformation that has a proton and a leaving group anti-periplanar.

Therefore, the correct option is H₂C, Br.

For more such questions on anti-periplanar , Visit:

https://brainly.com/question/25522247

#SPJ11

based on solubility rules, could you use fe(no3)3 rather than agno3 to determine the percent chloride in the unkown

Answers

No. According to solubility rule, we cannot use the Fe(NO3)3 rather than AgNO3 via analysis of precipitate of AgCl because no precipitate of cl- ion formed in Fe(NO3)3 .

A solubility chart having solubility rules is defined as a chart describing for different combinations of cations and anions whether the ionic compounds formed dissolve in or precipitate from a solution. This chart shows the solubility of various common ionic compounds in water, at a pressure of 1 atm. and under room temperature.

The following reactions are involved to determine Cl- concentration,

Case 1:  Fe(NO3)3 (aq.) + Cl-(aq.)   ----> FeCl3(aq.) + NO3-(aq.).

In this reaction involving aqueous solution of Fe(NO3)3 no precipitate of Cl- ion compound is formed .so this we can not use Fe(NO3)3 to determine %Cl- ion in solution.

Case 2 :

AgNO3(aq.) + Cl- (aq.)  ---> AgCl(precipitate) + NO3-.

This reaction involving aqueous solution of AgNO3 can be use to determine %Cl- ion concentration in solution via analysis of precipitate of AgCl .

To learn more about Solubility Rule

https://brainly.com/question/15596863

#SPJ4

or the substituted cyclohexane compound shown, identify the atoms that are cis to the hydroxyl (oh) substituent.

Answers

The atoms that are cis to the hydroxyl (OH) substituent are the two carbon atoms in the ring that are directly adjacent to the OH group.


Cis-trans isomerism is a word used in chemistry that refers to the spatial arrangement of atoms within molecules. It is also known as geometric isomerism or configurational isomerism. The Latin prefixes "cis" and "trans" mean, respectively, "this side of" and "the other side of." Trans conveys that the functional groups (substituents) are on the opposite (transverse) sides of some plane, whereas cis implies that they are on the same side of some plane in the context of chemistry.

Cis-trans isomers are examples of stereoisomers, which are pairs of molecules with the same formula but distinct functional groups oriented in three dimensions. The absolute stereochemical explanation of E-Z isomerism does not necessarily equate to cis-trans notation.

The hydroxyl group (-OH) is attached to carbon number 1. The cis atoms are those that are attached to the same side of the ring. There are two atoms that are cis to the hydroxyl (OH) substituent, and these are atoms number 2 and 3. Therefore, the atoms that are cis to the hydroxyl (OH) substituent are atoms number 2 and 3 .

Thus, the cis to the hydroxyl (OH)  is (B) 2 and 3.

For more such questions on Cis-trans , Visit:

https://brainly.com/question/13557044

#SPJ11

Please help me Look at the picture below

Answers

The first two statements are false, whereas the last statement, which says that pressure and volume of a gas are inversely related, is true.

How are pressure and volume related to one another?

Statement 1: This claim was incorrect because, according to the ideal gas law, PV=nRT, pressure (P) and volume (V) are inversely proportional to each other at a constant temperature (T) and amount of gas (n). This means that as pressure increases, volume decreases. This relationship is known as Boyle's law. Therefore, the statement that pressure has no effect on volume of a gas is false.

Statement 2: This claim was incorrect because, pressure and volume of a gas are inversely related according to Boyle's law, which states that at a constant temperature, the pressure of a gas is inversely proportional to its volume. This means that if the pressure of a gas increases, its volume will decrease, and if the pressure decreases, the volume will increase, as long as the temperature remains constant.

Statement 3: This claim was correct because, According to Boyle's law, the pressure and volume of a gas are inversely proportional to each other, which means that when the pressure of a gas increases, its volume will decrease and vice versa, as long as the temperature and the number of particles in the gas are kept constant. This relationship is expressed mathematically as P₁V₁ = P₂V₂, where P₁ and V₁ are the initial pressure and volume, and P₂ and V₂ are the final pressure and volume.

To find out more about gas laws, visit:

https://brainly.com/question/27009857

#SPJ1

Identify each of the following orbitals, and determine the n and quantum numbers. Explain your answers.

Answers

(a) one radial node the Number of radial nodes = n - l - 1

And number of angular nodes = l

n = 3 and l = 1

Orbital is 3p.

(b) It has zero angular node hence s-orbital and there is 1 radial node . 1 = n - 0 - 1 ; n = 2 and l = 0

The orbital is 2s.

(c) the shape of the orbital is that of dz². There is two angular nodes and there is no radial node.

n = 3 and l = 2

Hence the orbital is 3dz².

What is radial node?

In atomic physics, a radial node is a point in space where the probability density of finding an electron in an atom is zero. It is a type of nodal plane that occurs in atomic orbitals, which are regions of space where electrons are most likely to be found.

Radial nodes occur in the radial distribution function of an atomic orbital, which describes the probability density of finding an electron at a given distance from the nucleus. The number of radial nodes in an atomic orbital is equal to n - l - 1, where n is the principal quantum number and l is the azimuthal quantum number.

Radial nodes represent regions of space where the radial wave function of the electron changes sign.

To know more about electrons, visit:

https://brainly.com/question/12001116

#SPJ1

Blood is an example of a basic buffer system. Which of the following could be used to mimic the buffering abilities of blood?
Select the correct answer below:
HF and NaF
CH3NH2 and CH3NH3Cl
KOH and H2O
none of the above

Answers

Using CH3NH2 and CH3NH3Cl, one may simulate the blood's buffering properties. A weak acid and its conjugate base, or a weak base and its conjugate acid, make up a buffer system.

Which of the following best describes the blood's buffer system?

Carbonic acid and sodium bicarbonate. Hint: Human blood has a buffer of bicarbonate anion (HCO3) and carbonic acid (H2CO3) to keep the blood's pH between 7.35 and 7.45. Blood pH values higher or lower than 7.8 or 6.8 can be fatal.

Is blood an illustration of a fundamental buffer system?

Bicarbonate anion and hydronium are in equilibrium with carbonic acid in this buffer. A weak acid and its conjugate base, or a weak base and its conjugate acid, make up a buffer.

To know more about acid visit:-

brainly.com/question/28175742

#SPJ1

Answer:

CH3NH2 and CH3NH3Cl

Explanation:

Methylamine (CH3NH2) is an organic base. In order to produce a basic buffer solution similar to blood, we can combine this base with a soluble salt of its conjugate acid, such as CH3NH3Cl. The solution of KOH and H2O would not be a good buffer because KOH is a strong base. The solution of HF and NaF is a buffer, but the pKa of HF is about 3.2, which is far from the pH of blood, 7.4.

which of the following is the correct electron configuration for tc? select the correct answer below: [kr]5s24d5 [kr]4d7 [kr]5s24d2 [kr]5s25d5

Answers

The correct electron configuration for Tc (technetium) is [Kr] 5s² 4d⁵. Therefore, the correct answer is: [kr]5s²4d⁵.

What is technetium?

Technetium (Tc) is a radioactive chemical substance with the atomic number 43 and symbol Tc. It is a silvery-gray metal that belongs to the transition metals group on the periodic table. Technetium is the first element to be artificially produced, and all of its isotopes are radioactive, with no stable isotopes. It is a highly toxic and dangerous element, and therefore has no significant commercial applications. Technetium has many nuclear and medical applications due to its radioactivity, and is used in medical imaging, cancer treatment, and scientific research.

To know more about technetium, visit:

https://brainly.com/question/29845296

#SPJ1

Answer:

C

Explanation:

edg 2023

For the partially completed Lewis structures, pick the correct Lewis structure.





How many Valence Electrons total overall?

Answers

The correct Lewis structures of the compounds that we have in the question have been shown in the images attached.

What is the Lewis structure?

A Lewis structure is a diagram that shows the bonding between atoms in a molecule and the arrangement of electrons around the atoms. It is also known as a Lewis dot structure, Lewis dot diagram, or electron dot structure.

Lewis structures are useful in predicting the geometry of molecules and determining the polarity of molecules. They are also helpful in understanding the reactivity of molecules and how they interact with other molecules.

Learn more about Lewis structure:https://brainly.com/question/20300458

#SPJ1

1. What volume of hydrogen gas at STP is produced from the
reaction of 50.0g of Mg and 75.0 grams of HCl? How much
of the excess reagent is left over (in grams)?

Answers

Answer:

1.03 mol of dihydrogen gas will evolve, with a volume slightly over 22.4 dm3 at ST P. Explanation: Moles of magnesium: 50.0 ⋅ g 24.31 ⋅ g ⋅ mol−1 = 2.06 mol Moles of hydrogen chloride gas: 75.0 ⋅ g 36.2⋅ g ⋅ mol−1 = 2.07 mol

Explanation:

HOPE THAT HELPS ! <3

Using C2H4 + 3 O2 -> 2 CO2 + 2 H2O. If 20 moles of fuel are combusted in the above equation, how many moles of CO2 are produced?

Answers

According to the balanced equation:

1 mole of C2H4 produces 2 moles of CO2

Therefore, to determine the number of moles of CO2 produced when 20 moles of C2H4 are combusted:

20 moles C2H4 x (2 moles CO2/1 mole C2H4) = 40 moles CO2

Therefore, 40 moles of CO2 are produced.

What kind of scientist would study the effects of acid rain on marble statues? A. A physicist B. A biologist C. A chemist D. An economist​

Answers

Scientists would research the impacts of marble monuments and acid rain. A chemist. Hoping this is useful.

The correct answer is :C.

What are the substances that change the earth's surface?

Surface sediments are transported and large stones are broken up through wind, water, and ice. Years are often needed for weathering, erosion, and deposition to cause noticeable changes. Nonetheless, certain things change the Planet's surface far more quickly than others. Extreme events, earthquakes, and volcanic eruptions are a few of them.

What adjustments to the Planet's surface may rain makes?

Weathering and erosion caused by water movement change the properties of the terrain. Regional wind patterns and climate are defined by several interactions, including the role of the ocean. The unique physical and chemical properties of water have a profound effect on the planet's dynamics.

To know more about chemist visit :

https://brainly.com/question/30007736

#SPJ1

value: 4
Which of the following energy types are used in medical imaging process?
Light,heat,chemical, radiation

Answers

Answer:

radiation is the answer

which of the following elements is the most difficult to ionize? select the correct answer below: fr h he xe

Answers

The He element is the one that is hardest to ionize.

The correct answer is He.

Why is it called elements?

An object is categorised as an element if it cannot be reduced to a simpler form. It is possible to recognise them by their particular atomic number. The elements are organised into groups in the periodic table based on their atomic numbers, and those having related characteristics are underlined.

What components comprise the elements?

An element is any substance made entirely of a certain type of atom, which are the building blocks of all matter. We know that each element is composed of protons, neutrons, and electrons. Some of the tiniest components in all of nature are these.

To know more about Elements visit:

https://brainly.com/question/14347616

#SPJ1

draw a mechanism showing the penta-coordinate intermediate and the formation of the phosphorylated intermediate (which is an anhydride)

Answers

The formation of the phosphorylated intermediate (an anhydride) involves the formation of a penta-coordinate intermediate. This intermediate is formed by a nucleophilic attack of the sulfur on the phosphorus atom of the phosphate group.

In this mechanism, the sulfur atom of the sulfate group nucleophilically attacks the phosphorus atom of the phosphate group to form a penta-coordinate intermediate. This intermediate then rearranges to form a phosphorylated intermediate, which is an anhydride.

Mechanism showing the penta-coordinate intermediate and the formation of the phosphorylated intermediate are given as follows:

Step 1: Alkyl Phosphate Formation : The first step of the mechanism includes the formation of an alkyl phosphate. A proton is abstracted by OH− from the phosphate group to create the alkyl phosphate. The base catalyzes this step.

Step 2: Binding to Mg2+After the alkyl phosphate is created, the magnesium ion binds to it.

Step 3: Nucleophilic attack: Following that, the nucleophilic attack happens, with the nucleophile being the water molecule. It is coordinated with the magnesium ion. It occurs at phosphorus, causing it to be phosphorylated. It results in the creation of a pentacoordinate intermediate.

Step 4: Release of Orthophosphate: Orthophosphate is released as a result of the reaction between pentacoordinate intermediate and water. It results in the creation of a diester intermediate.

Step 5: Subsequent Hydrolysis: In the final step, the intermediate diester is hydrolyzed to form orthophosphate and the final product. This is accomplished via nucleophilic substitution.

The end result is a free phosphate group that is bound to the alcohol's oxygen. A phosphate anhydride is formed in the process.

For more such questions on phosphorylated , Visit:

https://brainly.com/question/29104695

#SPJ11

Other Questions
Arrange the steps to find an inverse of a modulo m for each of the following pairs of relatively prime integers using the Euclidean algorithm in the order. a = 2, m=17 Rank the options below. The ged in terms of 2 and 17 is written as 1 = 17-8.2. By using the Euclidean algorithm, 17 = 8.2 +1. The coefficient of 2 is same as 9 modulo 17. 9 is an inverse of 2 modulo 17. The Bzout coefficients of 17 and 2 are 1 and 8, respectively. a = 34, m= 89 Rank the options below. The steps to find ged(34,89) = 1 using the Euclidean algorithm is as follows. 89 = 2.34 + 21 34 = 21 + 13 21 = 13 + 8 13 = 8 + 5 8 = 5 + 3 5 = 3 + 2 3 = 2+1 Let 34s + 890= 1, where sis the inverse of 34 modulo 89. $=-34, so an inverse of 34 modulo 89 is -34, which can also be written as 55. The ged in terms of 34 and 89 is written as 1 = 3 - 2 = 3-(5-3) = 2.3-5 = 2. (8-5)- 5 = 2.8-3.5 = 2.8-3. (13-8)= 5.8-3.13 = 5. (21-13)-3.13 = 5.21-8. 13 = 5.21-8. (34-21) = 1321-8.34 = 13. (89-2.34) - 8.34 = 13.89-34. 34 a = 200, m= 1001 Rank the options below. By using the Euclidean algorithm, 1001 = 5.200 +1. Let 200s + 1001t= 1, where sis an inverse of 200 modulo 1001. The ged in terms of 1001 and 200 is written as 1 = 1001 - 5.200. s=-5, so an inverse of 200 modulo 1001 is -5. HELPPPP HURRY PLSS.. Q4 NEED HELP PLEASE HELP Below is the company data for Apple Inc, currently being traded on the US markets. The measures are stated om millions of USD currency. Cash & marketable securities $165 Fixed assets $286 Net sales $1320 Earnings Before Interests and Taxes (EBIT) $143 Net Earnings After Taxes (NEAT ) $ 66 Quick Ratio ((CA-Inventory)/CL) 2.1 to 1 Current Ratio (CA/CL) 3.4 to 1 Average Collection Period (ACP) 45.60 days Return on Equity (ROE, NEAT/Net Common Equity) 13% Tax rate 25% For Apples Liabilities & Equity side, they only report common equity, debt and current operating liabilities.Based on the detailed information above, find the following calculations; (1) Accounts Receivables, (2) Current Operating Liabilities, (3) Current Assets, (4) Total Assets, (5) Net Common Equity, and (6) Debt. (10 marks) With the increase in online commerce, assume Apple has decreased its ACP by 15.60 days (i.e., totaling 30 days) while holding all other variables constant, how much cash could they generate? (10 marks). What is Apples ROIC (post-tax) ? (10 marks) what state of matter is rutherfordium in while at room temperature Which of the following statements about demand is correct?a. A change in the price of bicycles will not lead to a shift of the demand curve for bicycles.b. A change in the price of automobiles will lead to a shift of the demand curve for motorcycles.c. A change in demand is equivalent to a movement along a given demand curve.d. When price falls, so does the quantity demanded.e. When the demand curve shifts to the right, so will the supply curve. Find the standard normal area for each of the following Round your answers to the 4 decimal places The nurse instructs a client with chronic kidney disease on the prescribed medication furosemide (Lasix). Which client statement indicates that teaching has been effective?A) "I will take this medication to keep my calcium balance normal."B) "This medication will make sure I have enough red blood cells in my body."C) "I will take this pill to keep my protein level in my body stable."D) "This pill will reduce the swelling in my body and get rid of the extra potassium." Spread English with Seeds of Endless OpportunitiesWhat could I draw with that message? 35% of households say they would feel secure if they had 50000 in savings he randomly selected 8 households and ask them if they would feel secure if they had 50000 in savings find the probability that the number that say that they would feel secure a exactly 5B more than 5 &c at most 5 Using what you have learned about the adolescent brain and social development, answer the questions in this case study assignment. Your goals are to help Monica understand why her son makes the choices he does and recommend some strategies that may help solve the problem. For each question, you should write a paragraph-length response (57 sentences) to receive credit for this assignment. You may use your Sophia tutorials as a resource.Question 3: What advice would you give Jordans mother, Monica, that would teach him how to make better choices and decisions? Discuss a specific strategy that Monica may implement to help her son make better decisions. which of the following is not a function of the spleen? destruction of old red blood cells removal of impurities storage of blood absorption of digested fats If 50 grams of water are saturated at 90C with potassium nitrate and then cooled to 40C, how much will precipitate? Which statement about the use of angiotensin-converting enzyme (ACE) inhibitors and autosomal recessive polycystic kidney disease (ARPKD) is accurate? 5. Identify examples of the poem's prosody, or rhythm. Abuelito Who Read the excerpt from "Out in the Snow" by LouisChandler Moulton.They saw the snow when they rose in the morning,Glittering ghosts of the vanished nightThough the sun shone clear in the winter dawningAnd the day with a frosty pomp was bright.Out in the clear, cold, winter weather-Out in the winter air, like wine-Kate with her dancing scarlet feather,Bess with her peacock plumage fineMark this and returnWhich line contains the best example of imagery used toappeal to the sense of sight?59:55O "They saw the snow when they rose in the morning""Out in the clear, cold, winter weather"OO"Out in the winter air, like wine"O"Kate with her dancing scarlet feather" if a traingle with all sides of equal legnth has a perimeter of 15x 27 , what is an expression for the legnth of one of the sides because of their supposed performance standing committees such as a safety committee and a product committee are not considered true teamsTrueFalse in which of the following cultures do fathers and mothers spend almost equal time interacting with their infants? The rate at which a rumor spreads through a town of population N can be modeled by the equation dt/dx = kx(Nx) where k is a constant and x is the number of people who have heard the rumor. (a) If two people start a rumor at time t=0 in a town of 1000 people, find x as a function of t given k=1/250. (b) When will half the population have heard the rumor?