Use the general formulas for gravitational force and centripetal force to derive the relationship between speed (v) and orbital radius (r) for circular orbits. Show the relationship you derived to your instructor before going on.

Answers

Answer 1

Solution :

We know that :

Formula for Gravitational force is given by :

[tex]$F_g=\frac{Gmn}{r^2}$[/tex]

where, G is the gravitational constant

            M is the mass of the bigger body

            m is the mass of the smaller body

            r  is the distance between the two bodies.

And the formula for the centripetal force is given by :

[tex]$F_c=\frac{mv^2}{r}$[/tex]

where, m is the mass of the rotating body

            v is the velocity

             r is the radius of rotation of the body.

We know that mathematically, the gravitational force is equal to the centripetal force of the body.

Therefore,

[tex]$F_g=F_c$[/tex]

[tex]$\frac{GMm}{r^2}=\frac{mv^2}{r}$[/tex]

[tex]$\sqrt{\frac{GM}{r}}=v$[/tex]

Hence derived.


Related Questions

A ball of mass 0.50 kg is rolling across a table top with a speed of 5.0 m/s. When the ball reaches the edge of the table, it rolls down an incline onto the floor 1.0 meter below (without bouncing). What is the speed of the ball when it reaches the floor?

Answers

Answer:

0

Explanation:

The speed of the ball when it reaches the floor is 0 because any object at rest or in uniform motion has no speed or velocity

A man is driving a car at speed 25m/s. calculate the distance covered by it in one hour.​

Answers

Answer:

6.94 km/hr

Explanation:

m/s to km/hr -> Multiply by 18/5

25/(18/5)

=> 25 x 5/18

=> 125/18 km/hr

=> 6.94 km/hr

Answer: 90,000 m = 90 km

Explanation:

Given information

Time = 1 hour

Speed = 25 m/s

Given expression deducted from the given information

Distance = speed × time

Convert units of time

1 hour = 60 minutes

1 minute = 60 seconds

1 hour = 60 × 60 = 3600 seconds

Substitute values into the expression

Distance = 25 × 3600

Simplify by multiplication

Distance = [tex]\boxed{90,000 m=90km}[/tex]

Hope this helps!! :)

Please let me know if you have any questions

Flapping flight is very energy intensive. A wind tunnel test
on an 89 g starling showed that the bird used 12 W of
metabolic power to fly at 11 m/s. What is its metabolic power for starting flight?

Answers

Answer:

The metabolic power for starting flight=134.8W/kg

Explanation:

We are given that

Mass of starling, m=89 g=89/1000=0.089 kg

1 kg=1000 g

Power, P=12 W

Speed, v=11 m/s

We have to find the metabolic power for starting flight.

We know that

Metabolic power for starting flight=[tex]\frac{P}{m}[/tex]

Using the formula

Metabolic power for starting flight=[tex]\frac{12}{0.089}[/tex]

Metabolic power for starting flight=134.8W/kg

Hence, the metabolic power for starting flight=134.8W/kg

Write the derivation and unit of impulse​

Answers

Answer:

impulse applied to an object produces an equivalent vector change in its linear momentum, also in the resultant direction. The SI unit of impulse is the newton second (N⋅s), and the dimensionally equivalent unit of momentum is the kilogram meter per second (kg⋅m/s).

A sinewave has a period (duration of one cycle) of 645 μs (microseconds). What is the corresponding frequency of this sinewave, in kHz

Answers

The corresponding frequency of this sinewave, in kHz, expressed to 3 significant figures is: 155 kHz.

Given the following data:

Period = 645 μs

Note: μs represents microseconds.

Conversion:

1 μs = [tex]1[/tex] × [tex]10^-6[/tex] seconds

645 μs = [tex]645[/tex] × [tex]10^-6[/tex] seconds

To find corresponding frequency of this sinewave, in kHz;

Mathematically, the frequency of a waveform is calculated by using the formula;

[tex]Frequency = \frac{1}{Period}[/tex]

Substituting the value into the formula, we have;

[tex]Frequency = \frac{1}{645 * 10^-6}[/tex]

Frequency = 1550.39 Hz

Next, we would convert the value of frequency in hertz (Hz) to Kilohertz (kHz);

Conversion:

1 hertz = 0.001 kilohertz

1550.39 hertz = X kilohertz

Cross-multiplying, we have;

X = [tex]0.001[/tex] × [tex]1550.39[/tex]

X = 155039 kHz

To 3 significant figures;

Frequency = 155 kHz

Therefore, the corresponding frequency of this sinewave, in kHz is 155.

Find more information: brainly.com/question/23460034

1. A sequence of potential differences v is applied accross a wire (diameter =0.32 mm length = 11 cm and the resulting current I are measured as follows: V 0.1 0.2 0.3 0.4 0.5 I (MA) 72 144 216 288 360 2) a) plot a graph of v against I.
b) determine the wire's resistence , R.
c) State ohm's law and try to relate it . your results.​

Answers

Answer:

a. Find the graph in the attachment

b. 720 kΩ

c. The ratio V/I gives us our resistance which is 720 kΩ

Explanation:

a) plot a graph of V against I.

To plot the graph of V against I, we plot the corresponding points against each other. With the voltage V measured in volts and the current I measured in mA, the plotted graph is in the attachment.

b) Determine the wire's resistance , R.

The resistance of the wire is determined as the gradient of the graph.

R = ΔV/ΔI = (V₂ - V₁)/(I₂ - I₁)

Taking the first two corresponding measurements. V₁ = 72 V, I₁ = 0.1 mA, V₂ = 144 V and I₂ = 0.2 mA

R = (144 V - 72 V)/(0.2 - 0.1) mA

R = 72 V/0.1 mA

R = 72 V/(0.1 × 10⁻³ A)

R = 720 × 10³ V/A

R = 720 kΩ

c) State ohm's law and try to relate it your results.​

Ohm's law states that the current flowing through a conductor is directly proportional to the voltage across it provided the temperature and all other physical conditions remain constant.

Mathematically, V ∝ I

V = kI

V/I = k = R

Since the ratio V/I = constant, from our results, the ratio of V/I for each reading gives us the resistance. Since we have a linear relationship between V and I, the gradient of the graph is constant and for each value of V and I, the ratio V/I is constant. So, the ratio V/I gives us our resistance which is 720 kΩ.

Since V/I is constant, we thus verify Ohm's law.

What is the momentum of a 36.9 N bowling ball with a velocity of 7.56 m/s?

Answers

Answer:

momentum (m)=36.9N

velocity (v)=7.56m/s

now,

momentum (m)=m×v

36.9=m×7.56

36.9÷7.56=m

m=4.89kg

Which of the following quantities is measured by the area under the velocity time graph? (a) Magnitude of velocity (b) Magnitude of acceleration (c) Magnitude of displacement (d) Average Speed​

Answers

Answer:

c.

magnitude of displacement

A rock is suspended by a light string. When the rock is in air, the tension in the string is 37.8 N. When the rock is totally immersed in water, the tension is 32.0 N. When the rock is totally immersed in an unknown liquid, the tension is 20.2 N. What is the Density of the unknown liquid?

Answers

When the rock is suspended in the air, the net force on it is

F₁ = T₁ - m₁g = 0

where T₁ is the magnitude of tension in the string and m₁g is the rock's weight. So

T₁ = m₁g = 37.8 N

When immersed in water, the tension reduces to T₂ = 32.0 N. The net force on the rock is then

F₂ = T₂ + B₂ - m₁g = 0

where B₂ is the magnitude of the buoyant force. Then

B₂ = m₁g - T₂ = 37.8 N - 32.0 N = 5.8 N

B₂ is also the weight of the water that was displaced by submerging the rock. Let m₂ be the mass of the displaced water; then

5.8 N = m₂g   ==>   m₂ ≈ 0.592 kg

If one takes the density of water to be 1.00 g/cm³ = 1.00 × 10³ kg/m³, then the volume of water V that was displaced was

1.00 × 10³ kg/m³ = m₂/V   ==>   V ≈ 0.000592 m³ = 592 cm³

and this is also the volume of the rock.

When immersed in the unknown liquid, the tension reduces further to T₃ = 20.2 N, and so the net force on the rock is

F₃ = T₃ + B₃ - m₁g = 0

which means the buoyant force is

B₃ = m₁g - T₃ = 37.8 N - 20.2 N = 17.6 N

The mass m₃ of the liquid displaced is then

17.6 N = m₃g   ==>   m₃ ≈ 1.80 kg

Then the density ρ of the unknown liquid is

ρ = m₃/V ≈ (1.80 kg)/(0.000592 m³) ≈ 3040 kg/m³ = 3.04 g/cm³

15- A racehorse coming out of the gate accelerates from rest to a velocity f 15.0 m/s due west in 1.80 s. What is its average acceleration?

Answers

Answer: (15 - 0)/1.8 = 8. 33m/s^2

Explanation:

The acceleration of the racehorse is 8.33 m/s²

The given parameters;

initial velocity of the racehorse, u = 0

final velocity of the racehorse, v = 15  m/s

time of motion of the horse, t = 1.8 s

The acceleration of the racehorse is calculated from change in velocity per change in time of motion as shown below;

[tex]a = \frac{\Delta v}{\Delta t} = \frac{v-u}{t} \\\\a = \frac{15 - 0}{1.8} \\\\a = 8.33 \ m/s^2[/tex]

Thus, the acceleration of the racehorse is 8.33 m/s²

Learn more here: https://brainly.com/question/17067013

A 15.0 g bullet traveling horizontally at 865 m>s passes through a tank containing 13.5 kg of water and emerges with a speed of 534 m>s. What is the maximum temperature increase that the water could have as a result of this event

Answers

Answer:

The rise in temperature is 0.06 K.

Explanation:

mass of bullet, m = 15 g

initial speed, u = 865 m/s

final speed, v = 534 m/s

mass of water, M = 13.5 kg

specific heat of water, c = 4200 J/kg K

The change in kinetic energy

[tex]K = 0.5 m(u^2 - v^2)\\\\K = 0.5\times 0.015\times (865^2-534^2)\\\\K = 3473 J[/tex]

According to the conservation of energy, the change in kinetic energy is used to heat the water.

K = m c T

where, T is the rise in temperature.

3473 = 13.5 x 4200 x T

T = 0.06 K

what Is accuracy ............​

Answers

Answer:

Accuracy is how much the consequence of an estimation adjusts to the right worth or a norm' and basically alludes to how close an estimation is to its concurred esteem

《OAmalaOHopeO》

Answer:

In a set of measurements, accuracy is closeness of the measurements to a specific value, while precision is the closeness of the measurements to each other.

Explanation:

_Hope it helps you_

What is the need for satellite communication elaborate

Answers

The high frequency radio waves used for telecommunications links travel by line of sight and so are obstructed by the curve of the Earth. The purpose of communications satellites is to relay the signal around the curve of the Earth allowing communication between widely separated geographical points.

Explanation:

hope it helps!!

Solve numerical problem. Please give me step - step explanation Help me out plz

Answers

Answer:

You should multiply 60 kg*9.8 and answer will come.

Hope this will help you.

Answer:

yes she is right you should multiple 60*9.8

have a great day God bless you

What about Iceland's location makes it particularly well-suited to produce electricity from geothermal energy

Answers

The volcanoes in Iceland generate geothermal energy, heating & help with the making of electricity

Answer:

Iceland lies on a boundary where two plates are moving away from each other. Heat from Earth’s interior rises through this plate boundary at a fast rate. This fact makes Iceland well-suited to producing electricity using its abundance of geothermal energy.

Explanation:

Edmentum sample answer.

A 2.5 kg block slides along a frictionless surface at 1.5 m/s.A second block, sliding at a faster 4.1 m/s , collides with the first from behind and sticks to it. The final velocity of the combined blocks is 2.5 m/s. What was the mass of the second block?

Answers

Answer:

1.5kg

Explanation:

Given data

mass m1= 2.5kg

mass m2=??

velocity of mass one v1= 1.5m/s

velocity of mass two v2= 4.1m/s

common velocity after impact v= 2.5m/s

Let us apply the formula for the conservation of linear momentum for inelastic collision

The expression is given as

m1v1+ m2v2= v(m1+m2)

substitute

2.5*1.5+ m2*4.1= 2.5(2.5+m2)

3.75+4.1m2= 6.25+2.5m2

collect like terms

3.75-6.25= 2.5m2-4.1m2

-2.5= -1.6m2

divide both sides by -1.6

m2= -2.5/-1.6

m2= 1.5 kg

Hence the second mass is 1.5kg

Two infinitely long parallel wires carry current in opposite directions. Wire 1 has current 15.0 A and wire 2 has current 19.9 A. If they are separated by a distance 4.3 m, at what location between the wires is the net magnetic field be twice the strength of the magnetic field from wire 1

Answers

Answer:

x= 2*I1*d/(I1+I2) meter

Electrons are emitted from a surface when light of wavelength 500 nm is shone on the surface but electrons are not emitted for longer wavelengths of light. The work function of the surface is

Answers

Explanation:

Given: [tex]\lambda = 500\:\text{nm} = 5×10^{-7}\:\text{m}[/tex]

[tex]\nu = \dfrac{c}{\lambda} = \dfrac{3×10^8\:\text{m/s}}{5×10^{-7}\:\text{m}}[/tex]

[tex]\:\:\:\:\:= 6×10^{14}\:\text{Hz}[/tex]

The work function [tex]\phi[/tex] is then

[tex]\phi = h\nu = (6.626×10^{-34}\:\text{J-s})(6×10^{14}\:\text{Hz})[/tex]

[tex]\:\:\:\:\:\:\:= 3.98×10^{-19}\:\text{J}[/tex]

The work function of the surface is equal to 3.98 × 10⁻¹⁹J.

What are frequency and wavelength?

The frequency can be explained as the number of oscillations of a wave in one second. The frequency has S.I. units of hertz.

The wavelength can be explained as the distance between the two adjacent points such as two crests or troughs on a wave.

The expression between wavelength (λ), frequency, and speed of light (c) is:

c = νλ

Given, the wavelength of the light, ν = 500 nm

The frequency of the light can determine from the above-mentioned relationship:

ν = c/λ= 3 × 10⁸/500 × 10⁻⁹ = 6 × 10¹⁴ Hz

The work function = h ν =  6 × 10¹⁴ × 6.626 × 10⁻³⁴

φ = 3.98 × 10⁻¹⁹J

Therefore, the work function of the surface is 3.98 × 10⁻¹⁹J.

Learn more about wavelength and frequency, here:

brainly.com/question/18651058

#SPJ2

A spherically mirrored ball is slowly lowered at New Years Eve as midnight approaches. The ball has a diameter of 8.0 ft. Assume you are standing directly beneath it and looking up at the ball. When your reflection is half your size then the mirror is _______ ft above you.

Answers

Answer:

The distance between mirror and you is 2 ft.

Explanation:

diameter, d = 8 ft

radius of curvature, R = 4 ft

magnification, m = 0.5

focal length, f = R/2 = 4/2 = 2 ft

let the distance of object is u and the distance of image is v.

[tex]\frac{1}{f}=\frac{1}{v}+\frac{1}{u}\\\\\frac{1}{2}=\frac{1}{v}+\frac{1}{u}\\\\v = \frac {2 u}{u - 2}[/tex]

Use the formula of magnification

[tex]m = \frac{v}{u}\\\\0.5 =\frac { u}{u - 2}\\ \\u - 2 = 2 u \\\\u = -2 ft[/tex]

A ball is launched from the ground with a horizontal speed of 30 m/s and a vertical speed of 30 m/s. How far horizontally will it travel in 2 seconds?
A. 30 m
B. 90 m
C. 45 m
D. 60 m

Answers

Answer:

It will travel Vx * t = 30 m/s * 2 s = 60 m

Distance = velocity x time
= 30m/s x 2 sec
= 60 m/s

A simple model of the human eye ignores its lens entirely. Most of what the eye does to light happens at the outer surface of the transparent cornea. Assume that this surface has a radius of curvature of 6.50 mm and that the eyeball contains just one fluid, with a refractive index of 1.41. Determine the distance from the cornea where a very distant object will be imaged.

Answers

Answer:

the distance from the cornea where a very distant object will be imaged is 23.35 mm

Explanation:

Given the data in the question;

For a spherical refracting surface;

[tex]n_i[/tex]/[tex]d_0[/tex] + [tex]n_t[/tex]/[tex]d_i[/tex] = ( [tex]n_t[/tex] - [tex]n_i[/tex] )/R

where [tex]n_i[/tex] is the index of refraction of the light of ray in the incident medium

[tex]d_0[/tex] is the object distance

[tex]n_t[/tex] is the index of refraction of light ray in the refracted medium

[tex]d_i[/tex] is the image distance

R is the radius of curvature

Now, let [tex]d_0[/tex] = ∞, such that;

[tex]n_i[/tex]/∞ + [tex]n_t[/tex]/[tex]d_i[/tex] = ( [tex]n_t[/tex] - [tex]n_i[/tex] )/R

0 + [tex]n_t[/tex]/[tex]d_i[/tex] = ( [tex]n_t[/tex] - [tex]n_i[/tex] )/R

we make [tex]d_i[/tex] subject of the formula

[tex]n_t[/tex]R = [tex]d_i[/tex]( [tex]n_t[/tex] - [tex]n_i[/tex] )

[tex]d_i[/tex] = ( [tex]n_t[/tex] × R ) / ( [tex]n_t[/tex] - [tex]n_i[/tex] )

given that; R = 6.50 mm, [tex]n_t[/tex] = 1.41, we know that [tex]n_i[/tex] = 1.00

so we substitute

[tex]d_i[/tex] = (1.41 × 6.50 mm ) / ( 1.41 - 1.00 )

[tex]d_i[/tex] = 9.165 / 0.41

[tex]d_i[/tex] = 23.35 mm

Therefore, the distance from the cornea where a very distant object will be imaged is 23.35 mm

A mass weighing 4 lb stretches a spring 4in. Suppose the mass is given an additional in displacement downwards and then released. Assuming no friction and no external force, the natural frequency W (measured in radians per unit time) for the system is? (Recall that the acceleration due to gravity is 32ft/sec2).
a) None of the other alternatives is correct.
b) W = v2 3
c)w=212
d) w = 4/6
e) w=213

Answers

Answer:

4√6 rad/s

Explanation:

Since the spring is initially stretched a length of x = 4 in when the 4 lb mass is placed on it, since it is in equilibrium, the spring force, F = kx equals the weight of the mass W = mg.

So, W = F

mg = kx where m = mass = 4lb, g = acceleration due to gravity = 32 ft/s², k = spring constant and x = equilibrium displacement of spring = 4 in = 4 in × 1ft /12 in = 1/3 ft

making k the spring constant subject of the formula, we have

k = mg/x

substituting the values of the variables into the equation, we have

k = mg/x  

k = 4 lb × 32 ft/s² ÷ 1/3 ft

k = 32 × 4 × 3

k = 384 lbft²/s²

Now, assuming there is no friction and no external force, we have an undamped system.

So, the natural frequency for an undamped system, ω = √(k/m) where k = spring constant = 384 lbft²/s² and m = mass = 4 lb

So, substituting the values of the variables into the equation, we have

ω = √(k/m)

ω = √(384 lbft²/s² ÷ 4 lb)

ω = √96

ω = √(16 × 6)

ω = √16 × √6

ω = 4√6 rad/s

Cho dòng điện xoay chiều trong sản xuất và sinh hoạt ở nước ta có tần số f = 50Hz. Tính chu kỳ T và tần số góc ω?

Answers

Answer:

T = 1/f = 1/50(s)

ω = 2πf = 100π (rad/s)

(vote 5 sao nhó :3 )

At room temperature, sound travels at a speed of about 344 m/s in air. You see a distant flash of lightning and hear the thunder arrive 7.5 seconds later. How many miles away was the lighting strike? (Assume the light takes essentially no time to reach you).

Answers

Answer:

1.6031 miles

Explanation:

Given the following data;

Speed = 344 m/s

Time = 7.5 seconds

To find how many miles away was the lighting strike;

Mathematically, the distance travelled by an object is calculated by using the formula;

Distance = speed * time

Distance = 344 * 7.5

Distance = 2580 meters

Next, we would have to convert the value of the distance travelled in meters to miles;

Conversion:

1609.344 metres = 1 mile

2580 meters = X mile

Cross-multiplying, we have;

X * 1609.344 = 2580

X = 2580/1609.344

X = 1.6031 miles

(a+b)[tex]x^{2}[/tex]

Answers

u distribute it
(a+b) • x2
ax2 + bx2
THE ANSWER IS ax2 + bx2 (the two means squared)

1. Una pelota rueda hacia la derecha siguiendo una trayectoria en línea recta de modo que recorre una distancia de 10m en 5 s , después cambia su trayectoria cuando es lanzada hacia arriba 25m durante 7 s. Calcular la velocidad y la rapidez al punto final (altura maxima) al que llegó la pelota.

2. Una mariposa vuela en línea recta hacia el sur recorriendo una distancia de 15 m durante 28 s, después cambia de dirección hacia el Oeste recorriendo una distancia de 50 m en un tempo de 80 s ¿cuál es la velocidad y rapidez de la mariposa?

3.- Una persona camina durante 21 minutos hacia el este de su casa una distancia de 1500 m y después cambia su dirección hacia el Norte recorriendo una distancia de 3350 m en un tiempo 32 minutos llegando al supermercado. ¿Calcula la velocidad y rapidez de la persona?

4.- Un automóvil se mueve al Oeste recorriendo una distancia de 80 km en 1.2 horas, posteriormente cambia su trayectoria hacia el Sur, recorriendo una distancia de 120 km en un tiempo 1.6 hora. ¿Calcula la velocidad y rapidez del automóvil?

Answers

Answer:

https://youtu.be/ymHHdoCGJOU

What does E=mc2 stand for?

Answers

It stands for energy=mass times the speed of light squared.

That mean mass-energy equivalence

Steel railway tracks are laid at 8oC. What size of expansion gap are needed 10m long rail sections if the ambient temperature varies from -10oC to 50oC? [Linear expansivity of steel = 12 x]​

Answers

Answer:

Gap left = Change in length on heating

Gap=Initial length×Coefficient of linear expansion×change in temperature

Gap=10×0.000012×15m

⟹Gap=0.0018 m

this is an example u have to put your equation in it

Question 5 of 10
What must be the same for two resistors that are connected in parallel?

Answers

Answer:

in parallel combination : potential difference between two terminal of resistors are always constant. ... hence, potential difference ( voltage ) must be same across each resistor .

Explanation:

The position of a particle is given by ~r(t) = (3.0 t2 ˆi + 5.0 ˆj j 6.0 t kˆ) m

Answers

Answer:

[tex]v=(6ti+6k)\ m/s[/tex]

Explanation:

Given that,

The position of a particle is given by :

[tex]r(t) = (3.0 t^2 i + 5.0j+ 6.0 tk) m[/tex]

Let us assume we need to find its velocity.

We know that,

[tex]v=\dfrac{dr}{dt}\\\\=\dfrac{d}{dt}(3.0 t^2 i + 5.0j+ 6.0 tk) \\\\=(6ti+6k)\ m/s[/tex]

So, the velocity of the particle is [tex](6ti+6k)\ m/s[/tex].

Other Questions
describe the structural and functional aspects of grassland ecosystem Can someone please help me with this; im a lil bit confused.... Q.solve for the values of x in the equation 2x - 5x - 12 = 0 using the quadratic equation formula. 2.13 LAB: Branches: Leap YearA year in the modern Gregorian Calendar consists of 365 days. In reality the earth takes longer to rotate around the sun. To account for thedifference in time every 4 years a leap year takes place. A leap year is when a year has 366 days: An extra day, February 29th. Therequirements for a given year to be a leap year are:1) The year must be divisible by 42) If the year is a century year (1700 1800. etc.), the year must be evenly divisible by 400Some example leap years are 600712 and 2016Wirte a program that takes n a year and determines whether that year is a leap year.Exif the inputs1712 Determinar el flujo de calor a travs del piso de losa cuyas medidas 3 X 5 cm y temperaturas superficiales son -20 C y 40 C, la conductividad trmica del material es de 1,6 X 10 -3 cal/cm s C y su espesor es de 10 cm durante 1 hora.Una aluminio de 12 cm de grosor, pero estn perfectamente aislados en las dems paredes. Cada cuarto es un cubo de 4,0 m de arista. Si el aire de uno de los cuartos est a 10 C y el otro a 30 C. Cuntos calor se conduce durante dos minutos? 1,7X 10 -4 cal/ cm s CUna pared de asbesto de 0,15 cm de espesor 1400C y 1150 C en las superficies interna y externa, respectivamente. Cul es la perdida de calor a travs de una pared que tiene 0,5 m por 3 m de lado, en un tiempo de minuto y medio?!!!!!!NESECITO AYUDA Which of the following statements would Jacob Riis most likely agree with. I cant seem to get the answer right, please help me!!! The government had never intervened in the ways FDR proposed in his first 100 days. Why do you thinkthis happened? Explain. what are the different levels of profession Use the ordered pairs to give a function rule. Give the rule in slope intercept form {(-12,1.5)(-1,-1.25),(5,-2.75),(8,-3.5)} What type of cells are simple animal and plant cells?White blood cellsSpecialized cellsUnspecialized cellsRed cells What was the Calhoun doctrine? I need help :( ( no links aloud ) Can someone help me thank youuu!!! Write a Lewis structure for the phosphorus trifluoride molecule, PF3. Draw the Lewis dot structure for PF3. Draw the molecule by placing atoms on the grid and connecting them with bonds. Include all lone pairs of electrons. Fuente, Inc., has identified an investment project with the following cash flows.Year Cash Flow1 $ 1,040 2 1,270 3 1,490 4 2,230 a. If the discount rate is 9 percent, what is the future value of these cash flows in Year 4? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.)b. If the discount rate is 12 percent, what is the future value of these cash flows in Year 4? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.)c. If the discount rate is 23 percent, what is the future value of these cash flows in Year 4? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.) the area for this shape. Adjust the window so you can find all of the points of intersection for the system of equations.What are the roots of the original polynomial equation? Check all that apply. American culture began to accept that deafness did not prevent learning in part because of theO Braidwoods' work in signingO creation of a school for the DeafO French basis for ASLO requirement for public education in ASL what are the Different types of professions? What is a hardware device that allows you to connect to several computers and other devices to a single internet connection Givenl || m | n, find the value of x.m44nSubmit AnswerPLS HELP