Write a Lewis structure for the phosphorus trifluoride molecule, PF3. Draw the Lewis dot structure for PF3. Draw the molecule by placing atoms on the grid and connecting them with bonds. Include all lone pairs of electrons.

Answer:

All of the above

Explanation:

Molecules make up matter so they are considered matter as well.

Hope it helps c:

Answer:

[tex]n_{O_2}^{leftover}=7.7mol[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out firstly necessary for us to set up the corresponding chemical equation:

[tex]4Al+3O_2\rightarrow 2Al_2O_3[/tex]

In such a way, we calculate the moles of aluminum consumed by 13.0 moles of oxygen in the reaction, by applying the 4:3 mole ratio between them:

[tex]n_{Al}=13.0molO_2*\frac{4molAl}{3molO_2} =17.3molAl[/tex]

This means that Al is actually the limiting reactant and oxygen is in excess, for that reason we calculate the moles of oxygen consumed by 7.0 moles of aluminum:

[tex]n_{O_2}=7.0molAl*\frac{3molO_2}{4molAl} =5.3molO_2[/tex]

Thus, the leftover of oxygen is:

[tex]n_{O_2}^{leftover}=13.0mol-5.3mol\\\\n_{O_2}^{leftover}=7.7mol[/tex]

Whereas all the aluminum is assumed to be consumed.

Regards!

Answer:

[tex]{ \tt{1 \: mole = 6.02 \times {10}^{23} \: molecules }} \\ { \tt{6.0 \: moles = (6 \times 6.02 \times {10}^{23}) \: molecules }} \\ = { \bf{3.612 \times {10}^{24} \: molecules}}[/tex]

Answer:

a) C₆H₁₂O + 8.5 O₂ ⇒ 6 CO₂ + 6 H₂O

b) Fe₂(SO₄)₃ + 3 Ba(OH)₂ ⇒ 3 BaSO₄ + 2 Fe(OH)₃

Explanation:

a) A combustion is a reaction of a compound with oxygen to produce carbon dioxide and water. The corresponding equation is:

C₆H₁₂O + O₂ ⇒ CO₂ + H₂O

We will start balancing C atoms by multiplying CO₂ by 6 and H atoms by multiplying H₂O by 6.

C₆H₁₂O + O₂ ⇒ 6 CO₂ + 6 H₂O

Then, we get the balanced equation by multiplying O₂ by 8.5.

C₆H₁₂O + 8.5 O₂ ⇒ 6 CO₂ + 6 H₂O

b) This is a double displacement reaction of the general structure:

Salt 1 + Base 1 = Salt 2 + Base 2

The corresponding equation is:

Fe₂(SO₄)₃ + Ba(OH)₂ ⇒ BaSO₄ + Fe(OH)₃

First, we will balance Fe atoms by multiplying Fe(OH)₃ by 2 and S atoms by multiplying BaSO₄ by 3.

Fe₂(SO₄)₃ + Ba(OH)₂ ⇒ 3 BaSO₄ + 2 Fe(OH)₃

Then, we will get the balanced equation by multiplying Ba(OH)₂ by 3.

Fe₂(SO₄)₃ + 3 Ba(OH)₂ ⇒ 3 BaSO₄ + 2 Fe(OH)₃

Answer:

a.[tex]\bold{C_{6}H_{12}O_{6}\rightarrow 6CO_{2}+6H_{2}O}[/tex]

△H=−72 kcal

The energy required for production of 1.6 g of glucose is [molecular mass of glucose is 180 gm]

b.

[tex]\bold{Fe_{2}(SO_{4})_{3}+3Ba(OH)_{2}\rightarrow 3BaSO_{4}+2Fe(OH)_{3}}[/tex]

The iron(III) ions and chloride ions remain aqueous and are spectator ions in a reaction that produces solid barium sulfate.

Answer:

See explanation

Explanation:

Number of moles = reacting mass/molar mass

Number of moles of CaCl2•2H2O = 1.50 g/147.02 = 0.0102 moles

From the equation;

Na2CO3 + CaCl2•2H2O -> CaCO3 + 2NaCl + 2H2O

We can see is 1:1

1 mole of Na2CO3 reacts with 1 mole of CaCl2•2H2O

x moles of Na2CO3 reacts with 0.0102 moles of CaCl2•2H2O

x = 1 × 0.0102 moles/1

x = 0.0102 moles of Na2CO3

Mass of Na2CO3 = 0.0102 moles of Na2CO3 × 106g/mol = 1.08 g of Na2CO3

Answer:

3-

Explanation:

Sodium aurothiosulfate is a salt with the formula Na₃Au(S₂O₃)₂. The cation of the salt is sodium ion, and the anion is aurothiosulfate ion. We can determine the charge of the aurothiosulfate ion, considering that the sum of the positive and negative charges must be equal to the charge of the compound, which is zero.

3 × Na⁺ + 1 × Au(S₂O₃)₂ⁿ⁻ = 0

3 × +1 + 1 × Au(S₂O₃)₂ⁿ⁻ = 0

Au(S₂O₃)₂ⁿ⁻ = 3-

Answer:

2.23M

Explanation:

Molarity of a solution is calculated thus

Molarity = number of moles (n) ÷ volume (V)

According to this question, 4.11g of Zn metal was used in order to reach a volume of EDTA solution of 28.26 mL.

28.26mL = 28.26/1000

= 0.02826L

Using mole = mass/molar mass to calculate no. of moles of Zn

Mole = 4.11/65.4

mole = 0.0628mol

Molarity = 0.0628 ÷ 0.02826

Molarity = 2.23M

The concentration of the EDTA solution used is 2.23M

Answer:

1.00 M

Explanation:

Sn^2+ reacts with KMNO4 as follows;

5Sn^2+(aq) + 2MnO4^-(aq) + 16H^+(aq) ----> 5Sn^4+(aq) + 2Mn^+(aq) + 8H2O(l)

The number of moles of MnO4^- reacted = 42.1/1000 L × 0.145 mol/L

= 0.0061 moles

If 5 moles of Sn^2+ reacts with 2 moles of MnO4^-

x moles of Sn^2+ reacts with 0.0061 moles of MnO4^-

x= 5 × 0.0061/2

x= 0.015 moles

Since the volume of the Sn^2+ solution is 15.00mL or 0.015 L

number of moles = concentration × volume

Concentration = number of moles/volume

Concentration= 0.015 moles/0.015 L

Concentration = 1 M

Answer:

D. 3.04 × 10^-19 J

Explanation:

c = lambda * nunu = c/lambda

E = h* nu

E = h * c/lambda = 6.626x10^-34 J-sec * 3x10^8 m/sec / 6.54x10^-7 m

E = 3.04x10^-19 J

Answer:

Covalent bonding occurs when pairs of electrons are shared by atoms.

Explanation:

Atoms will covalently bond with other atoms in order to gain more stability, which is gained by forming a full electron shell. By sharing their outer most (valence) electrons, atoms can fill up their outer electron shell and gain stability.

Answer:

Explanation:

1 mol of ideal gas at STP occupies 22.4 (or 22.7 depending on the convention being used for STP) liters in volume. I will use 22.4 so 17.88*22.4 = 400.5 L

Answer:

CH3OH < FCH2OH < F2CHOH < F3COH

Explanation:

Let us recall that, for a carboxylic acid, the dissociation of the acid yields;

RCOOH ⇄RCOO^- + H^+

The ease of dissociation and release of the hydrogen ion depends on the nature of the group designated R.

When R is is a highly electronegative element, the -I inductive effect causes the hydrogen to become less tightly held by the C-Cl bond.

As the number of electron withdrawing substituents increaseses, the acid ionizes much more and becomes stronger.CH3OH < FCH2OH < F2CHOH < F3COH

Hence, the order of decreasing acid strength is;

Answer:

are in the same orbital

Explanation:

Answer:

are in the same orbit

Explanation:

Answer:

See explanation

Explanation:

Extraction has to do with the separation of the components of a mixture by dissolving the mixture in a set up involving two phases. One phase is the aqueous phase (beneath) while the other is the organic phase (on top). The solvents used for the two phases must not be miscible. Water commonly is used for the aqueous phase.

Ethanol is an important solvent in chemistry but the solvent is miscible with water in all proportions. As a result of this, ethanol is a poor solvent for carrying out extraction.

Answer:

Please find the structure attached as an image

Explanation:

Based on the characteristics ending name (-ene) of the organic compound above, it belongs to the ALKENE GROUP. Alkenes are characterized by the possession of a carbon to carbon double bond (C=C) in their structure.

- But-3-ene tells us that the organic compound has four straight carbon atoms with the C=C (double bond) located on the THIRD carbon depending on if we count from right to left or vice versa.

- 2 methyl indicates that the methyl group (-CH3) is located as an attachment on the second carbon (carbon 2).

N.B: In the structure attached below, the counting is from the left to right (→).

Answer:

Explanation:

Molecular FormulaC4H7O2

Average mass87.098 Da

Monoisotopic mass87.045151 Da

Answer:

Kc = [Zn²⁺] / [Cd²⁺]

Explanation:

Let's consider the spontaneous redox reaction between Cd²⁺ and Zn.

Cd²⁺(aq) + Zn(s) ⇄ Cd(s) + Zn²⁺(aq)

The equilibrium constant, Kc, is the ratio of the equilibrium concentrations of products over the equilibrium concentrations of reactants each raised to the power of their stoichiometric coefficients. It only includes gases and aqueous species.

Kc = [Zn²⁺] / [Cd²⁺]

Solution :

The smallest integer value represents the smaller number of protons.

In this case, in the given values, the smallest numbers are 8 mm and 9 mm, so both contains 1H each. Then next highest  value is 17 mm, which contains 1H more. Thus 17 mm contains 2H each. Then the next highest is 25 mm and 26 mm which contains 3M each and so on.

Thus the tables is :

Integral     Protons

52 mm           [tex]6[/tex]

17 mm            [tex]2[/tex]

17 mm            2

26 mm           3

17 mm            2

25 mm           3

26 mm           3

9 mm              1

9 mm              1

35 mm            4    

8 mm              1

Answer:

c

letra c certeza confia

First Reaction is a Decomposition reaction as a single reactant hets decompoesed to form two products.Second reaction is a Synthesis reaction as two Reactant reacts together to form one product.

Decomposition reactions are processes in which chemical species break up into simpler parts.

Usually, decomposition reactions require energy input.

Hence, First Reaction is a Decomposition reaction as a single reactant hets decompoesed to form two products.Second reaction is a Synthesis reaction as two Reactant reacts together to form one product.

Learn more about Reaction here ;

https://brainly.com/question/27948961

#SPJ2

Answer: CH3NH2

Explanation:

Answer:

925.66 J/K

Explanation:

Applying,

Q = CΔt............. Equation 1

Where Q = amount of heat, C = heat capacity of the calorimeter, Δt = rise in temperature.

make C the subject of the equation

C = Q/Δt.............. Equation 2

From the question,

Given: Q = 3.86 kJ = 3860 J, Δt = 4.17K

Substitute into equation 2

C = 3860/4.17

C = 925.66 J/K

Answer:

[tex]particles=1.42x10^{23}[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us solve this problem by using the ideal gas law:

[tex]PV=nRT[/tex]

Which can be modified to include the particles in terms of the Avogadro's number:

[tex]PV=\frac{particles}{N_A} RT[/tex]

Thus, if we solve for the particles, we will obtain the expression and the numerical result:

[tex]particles=\frac{PV*N_A}{RT}[/tex]

[tex]particles=\frac{1.0atm*6.0L*6.022x10^{23}}{0.08206\frac{atm*L}{mol*K}*310K} \\\\particles=1.42x10^{23}[/tex]

Regards!

The answer below is correct but to give you the process, here it is:

Molar mass of iron, Fe = 55.85 g/mol

3.30g/(55.85 g/mol) = 0.0591 mol

Answer:

40.5 g of P₄O₁₀ are produced

Explanation:

We state the reaction:

P₄ + 5O₂ → P₄O₁₀

We do not have data from P₄ so we assume, it's the excess reactant.

We need to determine mass of oxygen and we only have volumne so we need to apply density.

Density = mass / volume, so Mass = density . volume

Denstiy of oxygen at STP is: 1.429 g/L

1.429 g/L . 16.2L = 23.15 g

We determine the moles: 23.15 g . 1mol / 33.472g = 0.692 moles

5 moles of O₂ can produce 1 mol of P₄O₁₀

Our 0.692 moles may produce (0.692 . 1)/ 5 = 0.138 moles

We determine the mass of product:

0.138 mol . 292.88 g/mol = 40.5 g

Answer:

An unsaturated solution.

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to firstly realize we need to calculate the grams of vanillin in 0.070 moles by using its molar mass of 152.15 g/mol:

[tex]m=0.070mol*\frac{152.15 g}{1mol} =10.65g[/tex]

Thus, since the solubility is 10.65 g per 1 L of solution, we can notice 5.00 g will complete dissolve and produce an unsaturated solution.

Best regards!

Answer:

WAS THE VOOK NAME =THE BOY WHO HARNESSED THE WIND?

1.How did environmental factors affect food production? They could not grow any crops

2. What does William’s windmill allow him to have that he didn’t before? How does life change for him and his family? His windmill allowed him and his family to be able to regrow crops and have unlimited water. Life changes because don’t have to worry about drought issues.

3.Why are trees important to farmers in William’s village? The trees are important because they stop floods. Now whenever it rains the trees can soak up the water.4.Could you imagine living without electricity? What would your life be like? Describe William's life and compare it to American teenagers and even your own. I could not imagine living without electricity. If I lived without electricity, I think my life would be kind of hard at first but after a while I would have to get used to it. William had to depend on the sun for all his light a normal teenager can cut the lights on and off in

Answer:

A) greater than the Ksp

Explanation:

Given a solid ionic compound AB, it dissociates in water into its ions, as follows:

AB(s) → A⁺(aq) + B⁻(aq)

At equilibrium, the product of the concentrations of the ions is constant, and it is called Ksp:

AB(s) ⇄ A⁺(aq) + B⁻(aq)

Ksp = [A⁺][B⁻] ⇒ (concentrations at equilibrium)

Upon mixing the reagents for the formation of AB, the compound will precipitate if the initial ion product (Q) is greater than the Ksp. If Q is equal to Ksp, the ions are at equilibrium with the solid compound AB, and if is it less than the Ksp, the ions are soluble and no solid AB is formed yet.

Q = [A⁺][B⁻] ⇒ (initial concentrations)

Q = Ksp ⇒ saturated solution (at equilibrium)

Q< Ksp ⇒ unsaturated solution (ions are soluble)

Q> Ksp ⇒ precipitation of solid compound.

Therefore, the correct option is A) greater than the Ksp