Successive resonances/harmonics are observed to occur at 129, 215 and 301 Hz (Note: 129 Hz is not necessarily the fundamental frequency). the speed of sound is 76 added to 129 is 215
what is sound ?The pitch of the sound is a major property where the frequency of sound occur by human ear within the range of human hearing.
It is higher than the frequency of the sound where the higher is its pitch and a lower frequency means a lower pitch.
The loudness of sound is another property which can be determined by amplitude of the sound is a measure of the magnitude of the maximum disturbance of sound.
The speed is another property can be detrained as the sound waves which can travel through the medium is called the speed of sound and it is different for different mediums, travels fastest in solids.
For more details sound, visit
brainly.com/question/1502894
#SPJ5
Extra Practice In Exercises 1-4, use the diagram. 1. Give two other names for CD.
Answer: I think it’s point cd and line cd
Explanation:
Compare the movement of four cars. Car A covered a distance of 60 km in 1hr.
Car B covered a distance of 30 km in 30 minutes. Car C covered a distance of 20
km in 15 minutes, Car D covered a distance of 10 km in 7 minutes, which car had
the highest velocity?"
Answer:
car D
Explanation:
1) before to compare all the values of the velocities, they must be in the same units of measurement. It means:
for car A: V=60km / 1h=60km/h;
for car B: V=30km / 0.5h=60km/h;
for car C: V=20km / 0.25h=80km/h;
for car D: V=10km / (7/60)h≈85.7km/h.
2) according to the values calculated in item 1 the car D had the highest velocity.
Answer:
Below
Explanation:
We can use this formula to find the velocity of an object
velocity = displacement / change in time
*note I converted all distances to meters and all times to seconds, its not necessary though**
CarAvelocity = 60,000 m / 3600 sec
= 16.66667 m/s
CarBvelocity = 30,000 m / 1800 sec
= 16.66667 m/s
CarCvelocity = 20,000 m / 900 sec
= 22.2222 m/s
CarDvelocity = 10,000 m / 420 sec
= 23.80952 m/s
Therefor, car D has the highest velocity
Hope this helps!
A probability of breaking a tree is more than a short one during storm.why?
Answer:
Due to interia of motion
Why is evolution called a scientific theory?
Answer:
Explanation:
Evolution is both a fact and a theory. Evolution is widely observable in laboratory and natural populations as they change over time. The fact that we need annual flu vaccines is one example of observable evolution. At the same time, evolutionary theory explains more than observations, as the succession on the fossil record. Hence, evolution is also the scientific theory that embodies biology, including all organisms and their characteristics. In this paper, we emphasize why evolution is the most important theory in biology. Evolution explains every biological detail, similar to how history explains many aspects of a current political situation. Only evolution explains the patterns observed in the fossil record. Examples include the succession in the fossil record; we cannot find the easily fossilized mammals before 300 million years ago; after the extinction of the dinosaurs, the fossil record indicates that mammals and birds radiated throughout the planet. Additionally, the fact that we are able to construct fairly consistent phylogenetic trees using distinct genetic markers in the genome is only explained by evolutionary theory. Finally, we show that the processes that drive evolution, both on short and long time scales, are observable facts.
The evolutionary theory is a scientific theory because its assumptions are well sustained by scientific data.
Scientific data refers to the body of knowledge obtained by using the scientific method.A scientific theory is a well-sustained explanation of one or more questions of the natural world, which was repeatedly tested and verified by using the scientific method.The theory of evolution by natural selection is a theory because it has been repeatedly corroborated through the scientific method.In conclusion, the evolutionary theory is a scientific theory because its assumptions are well sustained by scientific data.
Learn more in:
https://brainly.com/question/11555274
How far will a bus travel if it averages a speed of 65 km/h for 7 hours?
What are you solving for?
What’s the equation?
Show work!
distance= speed*time
distance=65*7=455km
John took 0.75 hours to bicycle to his grandmother's house, a distance of 4 km. What is his velocity?
What are you solving for?
What’s the equation?
Show work!
Help pleaseee!
Answer:
5.3Km/hr
Explanation:
Velocity=Displacement/Time
D=4km;T=0.75hr
V=4/0.75=5.33..
John traveled at a speed of 5.3 km/h to get to his grandmother's house.
How is the rate of position change in relation to time measured?While velocity is the rate of change of an object's position with respect to time in a specific direction, speed is the rate of change of an object's position with respect to time overall. The speed of an item moving in a certain direction is referred to as its velocity. When there is a change in speed, direction, or both, the velocity also changes.
Given:
Time taken to travel, t = 0.75 h
Total distance travelled = 4 km
Let's imagine that John traveled to his grandmother's house in a single direction at a constant pace.
Velocity = Distance travelled in a given direction/Time
So, Velocity = 4 km/0.75 h = 5.3 ≈ 5km/h
John's speed in getting to his grandmother's residence was thus 5 km/h.
Learn more about the Velocity with the help of the given link:
https://brainly.com/question/19979064
#SPJ2
multiples and submultiples of kg
Answer:
Submultiples of kilogram are decagram ,centigram etc. And multiples of kilogram is megagram(1 tonne) , gigagram etc.
hope this helps you:)
The circled one please
Mark brainliest!!
Answer:
50µs
Explanation:
The conversion is that 1 second equals 1,000,000 micro seconds. Since we have 0.00005 seconds, we will multiply that to a million.
0.00005 * 1,000,000 = 50µs
Keep in mind that 50 only has 1 significant figure because any trailing zeroes before the decimal point do NOT count.
Best of Luck!
0.00005 seconds = 50 μs
Thank you
1. An MR-2 starts from rest and accelerates westward to a speed of 27 m/s in
11.8 seconds.
a) What is its acceleration?
b) What is the displacement it covered?
Answer:
a) 2.28 m/s²
b) 159.86 m
Explanation:
Part A:
u = 0 m/s
v = 27 m/s
t = 11.8 seconds
a = ?
Formula:
v = u + at
=> 27 = 0 + a(11.8)
=> 27 = a(11.8)
=> a(11.8) = 27
=> a = 27/11.8
=> a = 2.28 m/s²
Part B:
s = ?
Formula:
s = (v² - u²)/2a
s = (27² - 0²) /2(2.28)
= 729/4.56
= 159.86 m
I need some help, this is going to be late.
Answer:
gravitational force
Explanation:
since they seem like they are falling, gravity usually pulls them down
i think its gravitational force
An astronaut floating in space is trying to use her jetpack to get back to her space station, but she is being pulled away by a nearby planet, as shown in the image below. Her jetpack provides a constant thrust of 165 N. If she angles her jetpack in such a way that it cancels out the vertical force due to the planet's gravity, what is her net horizontal force?
A. 132.6 N toward the space station
B. 53.3 N away from the space station
C. 98.5 N toward the space station
D. 112.8 N away from the space station
Answer:
C. 98.5N toward the space station
Explanation:
Fx= Fjet×cos(20) - Fplanet × cos(45) = 98.5
Because the result is positive so she is going toward the space station
4. The modern particle theory of matter was generally accepted
in what century? Whose concept of matter was overturned by
this revolution in science?
Answer:
the modern particle theory of matter was accepted in the mid-ninteenth century. Aistotle's continoues theory of matter was overturned. They gave matter order and determine many of its properties. your welcome :)
if your average speed is 3 m/s, how far have you traveled in 1 second, 2 second, 3 seconds?
Answer:
in 1 second 3m, in 2 seconds 6m, in 3 seconds 9m.
Explanation:
distance=speed × time
A mass of 20kg which moved vertically produced a momentum of 300kg.m/s, how much power was needed to move the mass?
Answer:
Power is 3000 W
Explanation:
Momentum = mass × velocity
[tex]300 = 20 \times v \\ velocity = 15 \: {ms}^{ - 1} [/tex]
For power:
[tex]P = \frac{force \times distance}{time} \\ \\ P = force \times ( \frac{distance}{time} )[/tex]
but distance/time is velocity, so:
[tex]P = force \times velocity[/tex]
but force = mass × acceleration:
[tex]P = (mass \times acceleration) \times velocity \\ P = (20 \times 10) \times 15 \\ P = 3000 \: \: watts[/tex]
[ taken acceleration to be 10 m/s² ]
Prove that s=ut+½at²
Explanation:
Distance travelled = Area under the line
= ut + ½ (v-u)t
Acceleration (a) = (v-u)/t and so (v-u) = at
Therefore,
Distance travelled (s) = ut + ½ (v-u)t = ut + ½ (at)t = ut + ½ at²
Thus,proved.
Two long straight parallel wires seperated by 20cm apart carry current of 20A and 1OA in opposite directions. What is the magnitude of the force on 1m length of the 20A wire
Answer:
Force is 2 × 10^-4 N
Explanation:
[tex]{ \bf{F = \frac{ \gamma_{o} I _{1} I _{2} l}{2\pi r} }}[/tex]
F is force
I is current
r is separation distance
gamma is a constant
l is wire length
[tex]F = \frac{(4\pi \times {10}^{ - 7}) \times (20) \times (10) \times 1 }{2\pi \times 0.2} \\ \\ F = 2 \times {10}^{ - 4} \: \: newtons[/tex]
The magnitude of the force on 1m length of the 20A wire is 2×10⁻⁴N.
To determine the answer, we need to know about magnetic field due to a current carrying wire and magnetic force.
What is the magnetic field produced due to a straight current carrying wire of current I₁?The magnetic field due to a straight wire having current I₁ at a perpendicular distance (say) 'd' is μ₀I₁ / 2[tex]\pi[/tex]d.
What is the magnetic force experienced by a straight wire of current I₂?Magnetic force on a current carrying wire of length 'L' and having current I₂ is I₂(L×B). Where B is the magnetic field at that wire.
What is the magnetic field on 20A wire due to 10A wire?d= 0.2m and I₁= 10AB= μ₀I₁ / 2[tex]\pi[/tex]d = 4[tex]\pi[/tex] ×10⁻⁷× 10/ 2[tex]\pi \\[/tex]×0.2 = 10⁻⁵ TWhat is the force on 20A wire?Current (I₂) = 20A, B = 10⁻⁵T and L= 1mMagnitude of force on the 20 A wire of length 1m = I₂×L×B( Here L and B are perpenicular to each other so L×B= L·B)
= 20×1×10⁻⁵
=2×10⁻⁴N
Thus, we can conclude that the magnitude of the force on 1m length of the 20A wire is 2×10⁻⁴N.
Learn more about magnetic force here:
https://brainly.com/question/25932320
#SPJ2
Two electric bulbs marked 25W – 220V and 100W – 220V are connected in series to a 440Vsupply. Which bulbs will fuse?
Answer:
25 W bulb will fuse.
The voltages will divide their ratios between the bulbs if we were to connect them.
What is the mass of a body? How is it measured?
The mass of a body is a measure of its inertial property or how much matter it contains.
Body mass index (BMI) is a measure of body fat based on height and weight that applies to both adult men and adult women. To determine BMI, weight in kilograms is divided by height in meters, squared
Mass is both a property of a physical body and a measure of its resistance to acceleration (rate of change of velocity with respect to time) when a net force is applied. An object's mass also determines the strength of its gravitational attraction to other bodies.
How is it measured?Mass is measured in kilogram.
What is used to measure it?To measure mass, we usually use a balance. In the lab, mass may be measured with a triple beam balance or an electronic balance. But an old fashioned beam balance gives the most accurate value.
Hope it helps you... pls mark brainliest if it helps youConvert 4 centimeters to meters using dimensional analysis and scientific notation. Please go step by step as I am having difficulty with this subject.
Answer:
[tex]thank \: you[/tex]
Carnot Engine: A Carnot cycle consists of 179) A) four adiabats. B) two adiabats and two isobars. C) four isotherms. D) two adiabats and two isotherms. E) two isobars and two isotherms
Answer:
which question is this
Explanation:
I don't understand sorry
What is motion please explain with diagram
Answer:
An object in a motion when it is continuously changing its position based on a reference point and observed by a person or a device.
Select the best answer for the question.
17. How many mL of HEPARIN 10,000 units/mL are needed for a 7,000 unit dose?
O A.0.7
O B. 0.07
O C.7
O D. 0.007
0.7 mL of HEPARIN 10,000 units/mL is needed for a 7,000 unit dose.
To calculate the volume of HEPARIN 10,000 units/mL needed for a 7,000 unit dose, we can use the formula:
Volume (mL) = Dose (units) / Concentration (units/mL)
Given that the dose is 7,000 units and the concentration of HEPARIN is 10,000 units/mL, we can plug these values into the formula:
Volume (mL) = 7,000 units / 10,000 units/mL
Volume (mL) = 0.7 mL
So, 0.7 mL of HEPARIN 10,000 units/mL is needed for a 7,000 unit dose. However, none of the provided answer choices match exactly with 0.7 mL. The closest option is B. 0.07 mL, which is one-tenth of 0.7 mL. Therefore, the correct answer is B. 0.07 mL.
To learn more about HEPARIN, here
https://brainly.com/question/31118361
#SPJ2
1. A leftward force is used to pull a large wagon. In the wagon there is an unknown mass
that makes it very difficult to move, but a force applied is able to set the wagon into
constant motion. Let the force applied to the wagon and its unknown mass be 77.3 N. The
coefficient of friction between the wagon's wheels and the floor is 0.011. Determine the
mass of the wagon if it was empty.
i. Let's say that the unknown mass in the wagon is 95.5% * mass of the
wagon. What is the weight of the wagon when its empty and what is the
weight of the unknown mass?
Answer:
Wagon weight 366.41314(9.81) = 3,594.5129 = 3590 N
Load weight 349.9245(9.81) = 3,432.75982 = 3430 N
Explanation:
Let's assume the surface and the applied force are horizontal.
At constant motion, the friction force must balance the applied force
(from F = ma)
Ff = 77.3
μΝ = 77.3
μmg = 77.3
m = 77.3 / (0.011(9.81))
m = 716.3376... kg
Let M be the mass of the wagon
M + 0.955M = 716.3376
M(1.955) = 716.3376
M = 366.41314...kg
0.955 M = 349.9245... kg
round to the three significant digits of the question numerals.
An acetate rods rubs against a cloth. What type of charge will the rod end up with?
A. Positive
B. Negative
C. Not enough info
D. Neutral
Answer:
I believe it's A
Explanation:
........
Read the following paragraphs, then answer the question on the right.
After handling contaminated dog food, fourteen people in nine states became ill from salmonella. According to the Centers for Disease Control and Prevention (CDC), the people who got sick had given that same contaminated dog food to their pets. At least five people were taken to a hospital, but the incident did not affect any of their dogs.
When people handle contaminated pet food and do not wash their hands well before eating or handling food, they can become ill with salmonella.
The plant that made the dog food was closed while the issue was investigated. The same plant had made food that was recalled by the pet food company four different times in the previous five months. Upon reopening the plant, the company issued a statement that it had taken action to fix the problems.
The cause of the illness was?
A.Not washing hands
B.Salmonella on dog food
C.Unknown
Answer:
i think the answer was
B.Salmonella on dog food
The cause of the illness was Salmonella on dog food, therefore the correct answer is option B.
What is science?Science is the methodical, empirically-based pursuit and application of knowledge and understanding of the natural and social worlds.
As stated in the article, the dog food manufacturing facility was shut down while the situation was looked into.
Four times in the preceding five months, the pet food manufacturer had to recall food that was produced at the same factory.
The business said in a statement after reopening the facility that it has taken steps to address the issues caused by Salmonella in dog food.
Thus, the cause of the illness was Salmonella on dog food, therefore the correct answer is option B.
Learn more about the science here,
https://brainly.com/question/18186842
#SPJ2
Which of the following phrases best describes the term scientific model?
A. The application of scientific knowledge to make predictions about
an object, system, or process
B. An experiment in which variables are controlled
C. A physical copy of a scientific object, system, or process
D. A simplified representation used to explain or make predictions
about something
SUBMIT
What is the field outside the capacitor plates in a parallel capacitor?
Answer is zero
Plz mark me brainlist
Explanation:
Outside two infinite parallel plates with opposite charge the electric field is zero, and that can be proved with Gauss's law using any possible Gaussian surface imaginable
Give reason
It is more difficult to climb a vertical slope than a slanted slope because
Answer:
because in vertical slope force of gravity is more than compared to slanted slope
Answer:
because gravity is always pulling objects down so when you climb upward gravity weighs you down, you have to use effort to move yourself in the opposite direction that gravity is pulling you that is why it is harder to climb up a slope.
the precision of interferometer of wavelength of light 800 nm would be: (a) 200 nm (b) 100 nm (c) 400 nm (d) 800 nm
Answer:
Explanation:
Did this come with a Picture?
5 The diagram shows a quantity of gas enclosed in a cylinder by a piston.
moves to the left
gas
+moves to the right
cylinder
piston
The piston is moved to the left or to the right. The temperature of the gas is kept constant
Which row describes the effect of moving the piston slowly in the direction shown in the table?
movement
of piston
speed of gas
molecules
pressure
of gas
A
to the left
increases
decreases
B
to the left
no change
increases
с
to the right
to the right
dreases
debebas
increases
D
no change
6 What causes the random, zig-zag movement (Brownian motion of smoke particles susne ded in
Answer:
A to the left increases and decreases
