Use the following data to determine whether the conversion of diamond into graphite is exothermic or endothermic:
C diamond (s) + O2 (g) ? CO2(g) ?H° = -395.4 kJ
2 CO2 (g) ? 2 CO(g)+O2 (g) ?H° = 566.0 kJ
2 CO2(g) ? Cgraphite(s) + CO2 (g) ?H° =-172.5 kJ
Cdiamond (s) ? Cgraphie (s) ?H°= ?

Answers

Answer 1

It's a negative value for ∆H°, indicating that the conversion of diamond to graphite releases energy. As a result, it is an exothermic reaction.

The conversion of diamond into graphite is exothermic. The enthalpy change of the reaction is -267.1 kJ.There are three reactions that take place in this process. Cdiamond (s) + O2 (g) → CO2(g) ∆H° = -395.4 kJ2 CO2 (g) → 2 CO(g)+O2 (g) ∆H° = 566.0 kJ2 CO2(g) → Cgraphite(s) + CO2 (g) ∆H° =-172.5 kJCdiamond (s) → Cgraphite (s) ∆H°= ?

The conversion of diamond to graphite is an endothermic process. It has a positive value of ∆H°. Therefore, the heat is absorbed by the surroundings. According to the first two reactions, the formation of CO and CO2 from the combustion of diamonds produces energy.

The net reaction for the conversion of diamond to graphite takes place as follows:

Diamond (s) + 2 O2(g) → Cgraphite (s) + 2 CO2 (g)

The energy change for this reaction can be determined by combining the above three reactions. The enthalpy change is obtained by subtracting the sum of the enthalpies of the reactants from the sum of the enthalpies of the products. The enthalpy change of the reaction is calculated as follows:

∆H°=ΣH°(products)−ΣH°(reactants)

∆H°=(−172.5)+(2×−393.5)+(566.0)−[(0)+(0)+(-395.4)+(2×0)]

∆H°=−267.1 kJ

To learn more about Exothermic reaction :

https://brainly.com/question/2924714

#SPJ11


Related Questions

please answer the question for BRAINLIEST asap

Using the formula M1V1 = M2V2 , if I add water to 100.0 mL of a 0.15 M NaOH solution until the final volume is 150 mL, what will the molarity of the diluted solution be?
Question 3 options:

0.23M


1.0M


0.10M


1.0E5M

Answers

Answer:

M2= 0,1 M

Explanation:

M1=0,15 M

V1= 100 mL =0,1 L

M2= ?

V2= 150 mL = 0,15 L

M1V1= M2V2

(0,15 mol/L) (0,1 L) = M2 (0,15 L)

0,015 mol / 0,15 L = M2

M2= 0,1 M

Using C2H4 + 3 O2 -> 2 CO2 + 2 H2O. If 20 moles of fuel are combusted in the above equation, how many moles of O2 are consumed?

Answers

Answer:

Using C2H4 + 3 O2 -> 2 CO2 + 2 H2O. If 20 moles of fuel are combusted in the above equation, how many moles of O2 are consumed?

Explanation:

According to the balanced chemical equation:

1 mole of C2H4 reacts with 3 moles of O2

Therefore, for 20 moles of C2H4 combusted, we would need:

20 moles C2H4 × (3 moles O2 / 1 mole C2H4) = 60 moles O2

So, 60 moles of O2 are consumed in the combustion of 20 moles of C2H4.

2ca + o2 - 2cao identify the oxidizing and reducing agents

Answers

Answer:

Ca is a reducing agent and O is the oxidizing agent.

Explanation:

calcium is the reducing agent as it reduces oxygen while it oxidize itself and oxygen is an oxidising agent because it oxidized others and reduces itself. in this equation oxygen is reducing and Calcium is oxidising. and as it is stated in the definition that oxidizing agent is the agent which oxidises others and reduces itself and it is also stated that reducing agent reduces others and oxidize itself. so based on this statement calcium is reducing agent and O is a oxidizing agent.

Which of the following describes a primary difference between distributive bargaining and interest-based bargaining?(1 point)

1. Interest-based bargaining is a type of negotiation.
2. Distributive bargaining seeks a solution that is beneficial to all parties.
3. Distributive bargaining is a type of negotiation.
4. Interest-based bargaining seeks a solution that is beneficial to all parties.

ECONOMICS! PLEASE HELP!

Answers

The primary distinction between these two negotiation strategies is that distributive negotiation does not take into consideration the demands of the other party when negotiating a settlement.

Which of the following statements most accurately describes an instance of distributive bargaining?

In a competitive negotiation style known as distributive bargaining, one party only gains when the other party loses.

What sets position-based bargaining apart from interest-based negotiation?

Positional negotiating involves both sides criticising one other's proposals in an effort to convince the other that theirs is the best. By engaging in interest-based negotiation, both (or all) sides approach the problem and search for a solution that best advances their individual interests.

To know more about solution visit:-

https://brainly.com/question/29015830

#SPJ1

For the partially completed Lewis structures, pick the correct Lewis structure.





How many Valence Electrons total overall?

Answers

The correct Lewis structures of the compounds that we have in the question have been shown in the images attached.

What is the Lewis structure?

A Lewis structure is a diagram that shows the bonding between atoms in a molecule and the arrangement of electrons around the atoms. It is also known as a Lewis dot structure, Lewis dot diagram, or electron dot structure.

Lewis structures are useful in predicting the geometry of molecules and determining the polarity of molecules. They are also helpful in understanding the reactivity of molecules and how they interact with other molecules.

Learn more about Lewis structure:https://brainly.com/question/20300458

#SPJ1

use the trendline equation in fig6.2 to determine the kelvin temperature at which the pressure equals .72 atm

Answers

When the pressure is 0.72 atm, the temperature in Kelvin is 156 K.

To determine the Kelvin temperature when the pressure is 0.72 atm, you will need to use the trendline equation given in Fig 6.2. First, find the equation of the trendline by using the graph's two points, (300 K, 1 atm) and (500 K, 2 atm).

The equation for the trendline is:

y = mx + b

Where y is pressure, x is the temperature in Kelvin, m is the slope, and b is the y-intercept. We can find the slope of the trendline by using the two points provided in the graph:

Slope (m) = (y2 - y1) / (x2 - x1)

Slope = (2 atm - 1 atm) / (500 K - 300 K)

Slope = 0.005 atm/K

The equation for the trendline can now be written: y = 0.005x + b. To find the y-intercept, b, we can use one of the two points: Solving for b:

1 atm = 0.005(300 K) + bb = 1.5 atm

Now we can use the equation for the trendline to find the temperature (x) at which the pressure (y) equals 0.72 atm:

0.72 atm = 0.005x + 1.5 atm

0.72 atm - 1.5 atm = 0.005x

-0.78 atm = 0.005xx

= -0.78 atm / 0.005x

= 156K

To learn more about Pressure :

https://brainly.com/question/24719118

#SPJ11

How many silicon atoms are in a piece of glass weighing 6.240

Answers

Assuming that the glass is made entirely of silicon dioxide (SiO2), which is a common component of glass, we can calculate the number of silicon atoms based on the molecular weight of SiO2 and the weight of the glass.

How many silicon atoms are in a piece of glass weighing 6.240?

The molecular weight of SiO2 is approximately 60 g/mol. Therefore, 6.240 g of SiO2 corresponds to:

6.240 g SiO2 × (1 mol SiO2/60 g SiO2) = 0.104 mol SiO2

Since each molecule of SiO2 contains one silicon atom, the number of silicon atoms in the piece of glass can be calculated by multiplying the number of moles of SiO2 by Avogadro's number (6.022 × 10^23 atoms/mol):

0.104 mol SiO2 × (6.022 × 10^23 atoms/mol) = 6.26 × 10^22 silicon atoms

Therefore, there are approximately 6.26 × 10^22 silicon atoms in a piece of glass weighing 6.240 g, assuming the glass is made entirely of SiO2.

Learn more about density from

https://brainly.com/question/15891311

#SPJ1

Which of the following are volume ratios from this equation? Select all that apply.
2H2 + O2 --> 2H2O

Answers

The volume ratios from the equation 2H2 + O2 → 2H2O are:

2 L H2 : 1 L O2 (or 2 mol H2 : 1 mol O2)1 L O2 : 2 L H2O (or 1 mol O2 : 2 mol H2O)

The coefficients in a balanced chemical equation give the ratio of moles of reactants and products. From the equation 2H2 + O2 → 2H2O, we can see that:

2 moles of H2 react with 1 mole of O2 to produce 2 moles of H2O.

Therefore, the following volume ratios are valid:

2 L H2 : 1 L O21 L O2 : 2 L H2O

What are the reactants?

The reactants are the substances that participate in a chemical reaction and are consumed to form new products. In the equation 2H2 + O2 → 2H2O, the reactants are hydrogen gas (H2) and oxygen gas (O2). These reactants undergo a chemical reaction to form water (H2O) as the product.

To know more about reactants, visit:

https://brainly.com/question/17096236

#SPJ1

value: 4
Which of the following energy types are used in medical imaging process?
Light,heat,chemical, radiation

Answers

Answer:

radiation is the answer

add curved arrows to show the mechanism of the propagation steps to form each monochlorination product shown.

Answers

To form each of the monochlorination products shown, you will need to draw curved arrows that demonstrate the propagation steps. The first step is when a chlorine radical combines with the double bond to form a chlorine radical cation, which then donates an electron to the double bond.

This results in the formation of two radical chlorides, one on each carbon atom. These radicals then combine with two hydrogen atoms to form the monochlorination product, completing the reaction.The curved arrows for this process should be drawn as follows:

An arrow pointing from the chlorine radical to the double bond, representing the attack of the radical all arrows have been drawn, the monochlorination product has been formed. The mechanism of propagation steps to form each monochlorination product is shown in the following reaction:To represent this reaction, you can draw a curved arrow to show the movement of electrons from the bond to the chlorine. The arrow should start from the carbon-carbon double bond and point towards the chlorine.

Then, another curved arrow can be drawn to represent the formation of the C-Cl bond. The arrow should start from the chlorine and point towards the carbon with the unpaired electron.This process can be repeated to form the second monochlorination product. The following diagram shows the mechanism of the propagation steps:Here, you can see that the curved arrows are used to represent the movement of electrons during the reaction. The arrows point towards the atom that is gaining the electrons.

For more such questions on  radical

https://brainly.com/question/289555

#SPJ11

which of the following is the correct electron configuration for tc? select the correct answer below: [kr]5s24d5 [kr]4d7 [kr]5s24d2 [kr]5s25d5

Answers

The correct electron configuration for Tc (technetium) is [Kr] 5s² 4d⁵. Therefore, the correct answer is: [kr]5s²4d⁵.

What is technetium?

Technetium (Tc) is a radioactive chemical substance with the atomic number 43 and symbol Tc. It is a silvery-gray metal that belongs to the transition metals group on the periodic table. Technetium is the first element to be artificially produced, and all of its isotopes are radioactive, with no stable isotopes. It is a highly toxic and dangerous element, and therefore has no significant commercial applications. Technetium has many nuclear and medical applications due to its radioactivity, and is used in medical imaging, cancer treatment, and scientific research.

To know more about technetium, visit:

https://brainly.com/question/29845296

#SPJ1

Answer:

C

Explanation:

edg 2023

Need BIO help with both questions

Answers

Answer:

6. The light being reflected off changes the color shown

7. The bottom, the sugar looses its positive charge

Explanation:

Consider the reaction between aqueous solutions of potassium hydroxide and chromium (III) chloride. Based on your balanced equation for this reaction, answer the following questions: 1) What are the spectator ions in this reaction? and 2) What is the formula for the precipitate formed in this reaction? 3) What is the sum of all the coefficients in the net ionic equation for this reaction? Net lonic Equati....pdf Hydrocarbon C....pdf

Answers

The net ionic equation for the given reaction is: 1 Cr3+(aq) + 3OH-(aq) → Cr(OH)3(s)

2. The formula for the precipitate formed in this reaction is Cr(OH)3.

3. The sum of all coefficients in the net ionic equation is 4.

Consider the reaction between aqueous solutions of potassium hydroxide and chromium (III) chloride. The balanced chemical equation for the given reaction is:KOH(aq) + CrCl3(aq) → KCl(aq) + Cr(OH)3(s)1) Spectator ionsThe ions that do not take part in the reaction are known as spectator ions.

These ions are present on both sides of the equation without undergoing any chemical changes.The ionic equation for the given reaction is:3K+(aq) + 3OH-(aq) + Cr3+(aq) + 3Cl-(aq) → 3K+(aq) + 3Cl-(aq) + Cr(OH)3(s)The spectator ions are K+ and Cl-.2)

PrecipitateThe precipitate is formed when the two reactants are combined together, and it can be identified from the ionic equation. In this reaction, the precipitate is formed when KOH is added to the aqueous solution of chromium(III) chloride.The formula for the precipitate formed in this reaction is Cr(OH)3.3) Sum of all coefficientsThe net ionic equation represents the actual chemical change occurring in the reaction.

The spectator ions are removed, and only the ions that participate in the reaction are shown. The net ionic equation for the given reaction is:Cr3+(aq) + 3OH-(aq) → Cr(OH)3(s)The sum of all coefficients in the net ionic equation is 4.

For more such questions on ionic equation

https://brainly.com/question/25604204

#SPJ11

given the atomic mass of hydrogen is 1 amu, the atomic mass of oxygen is 16 amu, and one molecule of sulfuric acid has a mass of 98 amu, what is the atomic mass of sulfur trioxide?

Answers

The atomic mass of sulfur trioxide (SO3) is 82 amu.

How to find the atomic mass of sulfur trioxide ?

Sulfur trioxide (SO3) has one sulfur atom and three oxygen atoms.

The atomic mass of sulfur can be calculated by subtracting the total mass of the oxygen atoms in sulfuric acid (3 x 16 amu) from the mass of sulfuric acid (98 amu) and then subtracting the mass of the remaining oxygen atom:

Mass of sulfur = (98 amu - 3 x 16 amu) - 1 x 16 amuMass of sulfur = (98 amu - 48 amu) - 16 amuMass of sulfur = 34 amu

The atomic mass of sulfur is 34 amu.

To find the atomic mass of sulfur trioxide, we add the atomic masses of one sulfur atom and three oxygen atoms:

Atomic mass of SO3 = 1 x 34 amu + 3 x 16 amuAtomic mass of SO3 = 34 amu + 48 amuAtomic mass of SO3 = 82 amu

Therefore, the atomic mass of sulfur trioxide (SO3) is 82 amu.

Learn more about sulfur trioxide here : brainly.com/question/1458186

#SPJ1

Calculate the hydronium ion concentration, [H3O+], for a solution with a pH of 6.82.

[H₂0¹] =
M

Answers

The hydronium ion concentration, [H+] of a solution with a pH of 6.82 is 1.51 × 10-⁷ M.

How to calculate hydrogen ion concentration?

The hydrogen or hydronium ion concentration of a solution can be calculated from the pH using the following formula;

pH = - log {H+}

[H+] = 10−pH

by exponentiating both sides with base 10, we can "undo" the common logarithm.

{H+} = 10-⁶.⁸²

{H+} = 0.000000151356

[H+] = 1.51 × 10-⁷ M

Therefore, the hydronium ion concentration with a pH of 6.82 is 1.51 × 10-⁷ M.

Learn more about pH at: https://brainly.com/question/8065527

#SPJ1

How many grams of copper(II) sulfate pentahydrate (CuSO 4 ​ ⋅5H 2 ​ O) are needed to prepare 100.00 milliliters of a 0.12M copper(II) sulfate solution?

Answers

Answer:2.5 g CuSO4⋅5H2O.

Explanation:

You're dealing with copper(II) sulfate pentahydrate,

CuSO

4

5

H

2

O

, an ionic compound that contains water of crystallization in its structure.

More specifically, you have five moles of water of crystallization for every one mole of anhydrous copper(II) sulfate. This means that you're going to have to account for the mass of this water of crystallization in your calculations.

Now, you need your target solution to have a molarity of

0.10 M

and a volume of

100. mL

. Since molarity is defined as moles of solute per liter of solution, you can say that the target solution must contain

1. Choose the atom with the larger first ionization energy.

Select one:

a. Titanium
b. Manganese


2. Choose the atom with the larger first ionization energy.

Select one:

a. Silicon
b. Tin

Answers

The atom with the larger first ionization energy is Titanium. Option a.

The atom with the larger first ionization energy is Tin. Option b.

Ionization and ionization energy

Ionization is the process of removing one or more electrons from an atom or molecule, resulting in the formation of an ion. This can be achieved through a variety of methods, such as exposure to high-energy radiation or contact with other charged particles.

Ionization energy is the amount of energy required to remove an electron from a neutral atom or molecule, resulting in the formation of a positively charged ion. This energy is typically measured in electron volts (eV) or kilojoules per mole (kJ/mol), and varies depending on the identity of the atom or molecule and the electronic configuration of its valence shell. Ionization energy is an important property of atoms and molecules, as it can provide insight into their reactivity and chemical behavior.

Learn more on ionization energy here https://brainly.com/question/20658080

#SPJ1

what is the independent variable and the dependent variable in which cleans teeth better baking soda or toothpaste project.

Answers

Answer:

The dependent variable would be the whitening of the teeth of the participants.

Explanation:

What is the molarity of sodium hydroxide if 20.0 mL of the solution is neutralized by each of the following 1.00M solutions?A. 28.0 mL of HClB. 17.4 mL of H3PO4

Answers

Molarity of NaOH for 28.0 mL of HCl = 0.560 M and Molarity of NaOH for 17.4 mL of H3PO4 = 0.910 M.

The molarity of sodium hydroxide if 20.0 mL of the solution is neutralized by 28.0 mL of HCl and 17.4 mL of H3PO4 are 0.560 M and 0.910 M, respectively.

A neutralization reaction is a chemical reaction between an acid and a base that results in the formation of salt and water. An acid and a base combine to form a salt and water in a neutralization reaction. Neutralization reactions are essential in life, as they aid in digestion, medical treatments, and other chemical reactions in the body. The balanced chemical equation for the neutralization reaction of sodium hydroxide with hydrochloric acid is:

NaOH + HCl → NaCl + H2O

The balanced chemical equation for the neutralization reaction of sodium hydroxide with phosphoric acid is:

3 NaOH + H3PO4 → Na3PO4 + 3 H2O

Molarity (M) = moles of solute / liters of solution

1. Calculate the number of moles of the acid. Using the given volume of the acid and its molarity, calculate the number of moles of acid.

Moles of acid = Molarity × Volume of acid (in liters)

2. Determine the number of moles of NaOH used in the reaction. Using the balanced equation, determine the number of moles of NaOH that reacted with the number of moles of acid.

Number of moles of NaOH = Number of moles of acid (from step 1)

3. Calculate the molarity of the NaOH solution.

Molarity of NaOH = Number of moles of NaOH / Volume of NaOH (in liters)Molarity of NaOH for 28.0 mL of HCl

= 0.560 M

Molarity of NaOH for 17.4 mL of H3PO4 = 0.910 M

For more such questions on Molarity , Visit:

https://brainly.com/question/14469428

#SPJ11

Q10. Hydrocarbon molecules can react with halogens like Cl2 or Br2 (represented generically by X2) where C-H bonds are replaced by C-X bonds, forming HX molecules in the process. Balance the following chemical reaction and compute the estimated heat of reaction using the values above.
C3H8(g) + X2(g) → C3H2X6(g) + HX (g)
You are given the following average bond energies:
H-H 436 kJ/mol
H-X 431 kJ/mol
H-C 414 kJ/mol
C-X 339 kJ/mol
X-X 243 kJ/mol

Answers

Answer: To balance the given chemical equation, we can start by counting the number of atoms on both sides of the equation. We have 3 carbon atoms and 8 hydrogen atoms on the left side, and 3 carbon atoms, 6 X atoms, and 1 hydrogen atom on the right side.

C3H8(g) + X2(g) → C3H2X6(g) + HX(g)

To balance the equation, we can add a coefficient of 3 in front of HX on the product side:

C3H8(g) + X2(g) → C3H2X6(g) + 3HX(g)

Now, we have the same number of H atoms on both sides (8 H atoms on each side), and the equation is balanced.

To estimate the heat of reaction, we can use the bond energy values to calculate the energy required to break the bonds in the reactants and the energy released by forming the bonds in the products. We can then subtract the energy required to break the bonds from the energy released by forming the bonds to obtain an estimate of the heat of reaction.

Breaking bonds in the reactants:

3 C-H bonds × 414 kJ/mol = 1242 kJ/mol

1 X-X bond × 243 kJ/mol = 243 kJ/mol

Forming bonds in the products:

6 C-X bonds × 339 kJ/mol = 2034 kJ/mol

1 C-H bond × 414 kJ/mol = 414 kJ/mol

3 H-X bonds × 431 kJ/mol = 1293 kJ/mol

Estimated heat of reaction:

Energy released - energy required

(2034 kJ/mol + 414 kJ/mol + 1293 kJ/mol) - (1242 kJ/mol + 243 kJ/mol) = 2756 kJ/mol

Therefore, the estimated heat of reaction for the given chemical equation is 2756 kJ/mol. Note that this is only an estimate and actual experimental values may differ due to factors such as reaction conditions and the presence of catalysts.

What is the meaning of friction

Answers

Explanation: the resistance that one surface or object encounters when moving over another.

or

the action of one surface or object rubbing against another.

Answer: a force that resists the motion of one object against another

why can't the enthalpy of formation of calcium carbonate be determined directly?​

Answers

The enthalpy change can not be measured directly because you have to take into account how much energy was put into the reaction in the first place.

Hope this helps!!! :)

The standard enthalpy of formation of all elements in their standard states are assumed to be zero. It is not possible to determine the enthalpy of formation of calcium carbonate as it is formed from other compounds.

What is enthalpy of formation?

The standard enthalpy of formation of a compound can be defined as the enthalpy change accompanying the formation of one mole of the compound from its constituent elements, all the substances being in their standard states.

The standard enthalpy of formation is usually denoted as ΔfH⁰. For example the enthalpy of formation of CO₂ and CH₄ are -393.5 kJ mol⁻¹ and -74.8 kJ mol⁻¹ respectively.

Here CaCO₃ is formed by the reaction:

CaO + CO₂ → CaCO₃

The enthalpy change for the given reaction is not an enthalpy of formation of CaCO₃. Since CaCO₃ is not formed from its constituent elements.

To know more about enthalpy of formation, visit;

https://brainly.com/question/17508960

#SPJ2

When a mineral breaks along a weekly bonded plane it is called

Answers

Answer: Cleavage


Explanation:

When a mineral breaks along a weekly bonded plane it is called cleavage

Please help me Look at the picture below

Answers

The first two statements are false, whereas the last statement, which says that pressure and volume of a gas are inversely related, is true.

How are pressure and volume related to one another?

Statement 1: This claim was incorrect because, according to the ideal gas law, PV=nRT, pressure (P) and volume (V) are inversely proportional to each other at a constant temperature (T) and amount of gas (n). This means that as pressure increases, volume decreases. This relationship is known as Boyle's law. Therefore, the statement that pressure has no effect on volume of a gas is false.

Statement 2: This claim was incorrect because, pressure and volume of a gas are inversely related according to Boyle's law, which states that at a constant temperature, the pressure of a gas is inversely proportional to its volume. This means that if the pressure of a gas increases, its volume will decrease, and if the pressure decreases, the volume will increase, as long as the temperature remains constant.

Statement 3: This claim was correct because, According to Boyle's law, the pressure and volume of a gas are inversely proportional to each other, which means that when the pressure of a gas increases, its volume will decrease and vice versa, as long as the temperature and the number of particles in the gas are kept constant. This relationship is expressed mathematically as P₁V₁ = P₂V₂, where P₁ and V₁ are the initial pressure and volume, and P₂ and V₂ are the final pressure and volume.

To find out more about gas laws, visit:

https://brainly.com/question/27009857

#SPJ1

What kind of scientist would study the effects of acid rain on marble statues? A. A physicist B. A biologist C. A chemist D. An economist​

Answers

Scientists would research the impacts of marble monuments and acid rain. A chemist. Hoping this is useful.

The correct answer is :C.

What are the substances that change the earth's surface?

Surface sediments are transported and large stones are broken up through wind, water, and ice. Years are often needed for weathering, erosion, and deposition to cause noticeable changes. Nonetheless, certain things change the Planet's surface far more quickly than others. Extreme events, earthquakes, and volcanic eruptions are a few of them.

What adjustments to the Planet's surface may rain makes?

Weathering and erosion caused by water movement change the properties of the terrain. Regional wind patterns and climate are defined by several interactions, including the role of the ocean. The unique physical and chemical properties of water have a profound effect on the planet's dynamics.

To know more about chemist visit :

https://brainly.com/question/30007736

#SPJ1

Which of the following molecules is drawn in a conformation that has a proton and a leaving group anti-periplanar? H₂C, Br Ph. H CH3 Br H H₂C Br H₂C Ph H₂C CH3 H Ph H₂C, Br H Ph Save for Later CH3 CH3 CH3 CH3 CH3 Sul

Answers

The molecule that is drawn in a conformation that has a proton and a leaving group anti-periplanar is H₂C, Br.

The A, B, C, and D bond angles of a molecule are referred to as anti-periplanar, or antiperiplanar, in organic chemistry. The dihedral angles of the A–B and C–D bonds in this conformer are larger than +150° or less than 150°. In textbooks, the term "anti-periplanar" is frequently used to refer to a strictly anti-coplanar structure with a 180° AB CD dihedral angle. The anti-periplanar functional groups will be 180° apart from one another and in a staggered configuration in a Newman projection of the molecule.  

Conformation is an essential factor in predicting reactivity in organic molecules. The anti-periplanar conformation of a molecule is one that occurs when two atoms in a molecule are in the same plane and are separated by 180 degrees. In this case, the proton and leaving group are placed in a perpendicular plane to the atoms directly in between them. This is the most stable conformer of the molecule. A significant factor in predicting reactivity in organic molecules is conformation. In this case, the molecule H₂C, Br is drawn in a conformation that has a proton and a leaving group anti-periplanar.

Therefore, the correct option is H₂C, Br.

For more such questions on anti-periplanar , Visit:

https://brainly.com/question/25522247

#SPJ11

Seventy five percent of a compound is carbon. If you have 250 grams of this particular compound, how much carbon is contained?

Answers

Answer:

The compound has 187.5 g. of Carbon

Explanation:

If the 100% of the compound is 250 gr, then you can calculate the 75% of it by multiplying:

Amount of Carbon = (75%) 250 g.

75%= 0.75

250  (0.75)

= 187.5 g.

the electron configuration of nitrogen is 1s^2 2s^2 2p^3. how many electrons are present in an atom of nitrogen? what is the atomic number for nitrogen?

Answers

Since the electronic configuration of nitrogen is 1s² 2s² 2p³, the number of electrons present in the nitrogen atom is 7, and the atomic number of nitrogen is also seven (7).

The atomic number of an atom is the number of protons in the nucleus of an atom. The number of protons defines the properties of an element. For example, if an element with 5 protons is boron atom.

The electronic configuration of an atom represents the number of electrons in each sub-energy level of the atom in the ground state.

The electronic configuration of nitrogen is 1s²2s²2p³. As you know, the electrons around the nucleus are located in energies or levels. Therefore, from the definition of electron configuration, we can say that the nitrogen atom has 2 electrons in the first energy level K of the s-subshell, and in the s-subshell and the p subshell of the second energy level L, respectively There are 2 or 3 electrons.

Therefore, the total number of electrons in the nitrogen atom is 7 (2 + 2 + 3). We know that the number of protons = the number of electrons, so the number of protons in the nitrogen nucleus is 7. Therefore, the nitrogen atom has an atomic number of 7.

For more information about electronic configuration, visit :

https://brainly.com/question/21977349

#SPJ4

3. Draw a Lewis dot structure for the fictitious molecular ion [ZO2]-1. Assume that the central Z atom is bonded to each of the outer O atoms by a single bond. What is the formal charge on the Z atom?

Answers

The formal charge on the Z atom in the [ZO2]-1 ion is +1.

The Lewis dot structure for the [ZO2]-1 molecular ion is:

          O

          |

    Z === O

          |

          O-

1.   Determine the total number of valence electrons in the ion by adding the valence electrons of each atom and the charge of the ion.

Z has 4 valence electrons, while each O atom has 6 valence electrons.The ion has an overall negative charge of 1, so there is one extra electron.Total number of valence electrons = 4 + 6 + 6 + 1 = 17

2.  Connect the Z atom to each O atom with a single bond, which uses up 2 electrons.

We now have 15 electrons left to distribute.

3.  Add the remaining electrons in pairs as lone pairs to each atom until all valence electrons are used up.

Each O atom needs 2 lone pairs (4 electrons).Z needs 2 lone pairs (4 electrons).

4.  Draw the Lewis dot structure.

The Lewis dot structure for [ZO2]-1 is:

O

|

Z === O

|

O-

5.  Calculate the formal charge on the Z atom using the formula:

Z has 4 valence electrons.Z has 2 lone pairs (4 electrons) and 2 bonding electrons (1 bond to each O).

Formal charge = valence electrons - (number of lone pair electrons + 1/2 x number of bonding electrons)

Formal charge = 4 - (2 + 1/2 x 2) = 4 - 3 = +1

Therefore, the formal charge on the Z atom in the [ZO2]-1 ion is +1.

What is valence electron?

A valence electron is an electron in the outer shell associated with an atom, and that can participate in the formation of a chemical bond if the outer shell is not closed.

To know more about valence electron, visit:

https://brainly.com/question/28977387

#SPJ1

what is the formula for co3+ and se2-?

Answers

The formula for Co3+ is Co3+ because it represents the ion of cobalt that has lost three electrons, leaving it with a 3+ charge.

What is chemical formula and how they are formed ?

A chemical formula is a symbolic representation of a chemical compound that shows the types of elements present in the compound and the relative number of atoms of each element. For example, the chemical formula for water is H2O, which indicates that it is made up of two hydrogen atoms and one oxygen atom.

Chemical formulas are formed by identifying the elements that make up a compound and determining the relative number of each element in the compound. The number of each element is represented by a subscript following the chemical symbol of the element. For example, the chemical formula for methane is CH4, which indicates that there is one carbon atom and four hydrogen atoms in each molecule of methane.

The formula for Se2- is Se2- because it represents the ion of selenium that has gained two electrons, giving it a 2- charge.

To know more about reaction visit :-

https://brainly.com/question/11231920

#SPJ1

Other Questions
n MacPherson v. Buick Motor the court held for MacPherson for injuries caused by defective wheels on his Buick. This case allowed for negligence for product liability:(A) with privity(B) with exception(C) with implied warranty(D) without privity(E) without exception what are the three primary ways to manage a product through its life cycle? cindy and tom, working together, can rake the yard in 8 hours. working alone, tom takes twice as long as cindy. how many hours does it take cindy to rake the yard alone? A customer places the following instructions with his registered representative: "Buy 100 shares of ABC if the market rises to $45, but don't buy the stock for more than $50." What is the appropriate order to be placed? i need help please help me 1) What antibiotics are usually effective against Staphylococcus aureus infections? A. lincomycin, clindamycinB. erythromycin, clarithyromycin.C. metronidazole, trimetoprim.D. cefaclor, cefuroximaxetil.E.oral flucloxacillin,erythromycin. 2) If facial boil is not fluctuant the surgeon should be prescribing:A. antibiotics and local application which relieves discomfort, helps localize theinfection, and promotes drainage.B. resolvents and physiotherapy.C. incision and drain of heart with antibacterial therapy.D. needle aspiration and antihistamines.E. coldaplication.3) To which of the following spaces can infection directly spread from a lower wisdomtooth:A. submasseteric, pterydomaxillary, submandibular.B. submasseteric, pterydomaxillary, sublingual.C. pterygomaxillary, parotid, sublingual.D. submandibular, sublingual, pterygopalatine pit.E. submasseteric, pterygopalatine pit.4) Furunculosis (multiple crops of boils) is associated with:A. atopic dermatitis, excoriations, abrasions.B. malnutrition, heart failure, drug addiction, severe generalized skin disease, and prolonged steroid therapy.C. folliculitis and acne vulgaris.D. diabetes mellitus, obesity, immune compromise as with HIV, blood dyscrasias,and treatment with immunosuppressive drugs.E. scabies.5) The boil of upper lip is more dentigerous (reffers to possible complications) for patient because:A. soft tissues in this region have low level antimicrobial resistance.B. skin of upper lip very often is damaged.C. fatty tissues of upper lip and surrounding tissues have intensive blood supply and innervation.D. facial vein has anastomoses with vessels and sinuses of brain.E. in the skin of the upper lip a lot of hair follicles. who is the architect of the vietnam veterans memorial in washington, d.c., which she designed when she was only 21 years old? if the true stress - true plastic strain curve can be described by the hollomon equation , obtain the true strain at the onset of necking in terms of hollomon equation parameters when people refer to the bottom line, they are referring to the company's which is shown on the bottom line in a company's income statement. 4. What is the meaning of the word "bear" as it isused in line 34?A. to carryB. to curveC. to presentD. to sink FILL IN THE BLANK Isabel, a newborn, turns her head toward a stimulus that strokes her cheek. Isabel is showing the ______ reflex What factors influence the remedies available to a seller when the buyer breaches a contract?...Choose 3 answers.the seller may resell the goods and sue to recover damages.the seller may sue to obtain specific performance.the seller may cancel the contract.the seller may withholding delivery of the goods. Which of the following are effective ways for managers to try to boost a company's stock price? Increase the company's dividend payments to shareholders each year by at least $0.05 per share, repurchase shares of common stock, and make every effort to achieve annual increases in earnings per share. Make every effort to achieve a branded market share in each geographic region that is at least equal to the industry average, keep the company's dividend payout ratio in the range of 50%, and repurchase shares of common stock. Increase the company's dividend payments to shareholders each year, keep the company's credit rating at A (or above), strive to increase the company's retained earnings each year by a minimum of 5%, and not issue more than 5,000 shares of common stock in any one year. Spend amounts on corporate citizenship and social responsibility that are above the industry average, boost the company's dividend payout ratio to more than 100%, and issue additional shares of common stock to raise the funds to pay off all long-term debt within 2 years. Cut the dividend to zero and issue additional shares of stock so as to increase the funds available for quickly paying off all long-term debt (ideally in no more than 2 years); then the company should avoid further use of long-term debt, striving to achieve and maintain a credit rating of A or A+. Write the given third order linear equation as an equivalent system of first order equations with initial values. (t - 2t^2)y' - 4y'" = -2t with y(3) = -2, y'(3) = 2, y"(3) = -3 Use x_1 = y, x_2 = y', and x_3 = y". with initial values If you don't get this in 2 tries, you can get a hint. What term refers to the development and management of supplier relationships to acquire goods and services in a way that helps achieve the needs of a business?(a) Lean procurement(b) Strategic sourcing(c) JIT sourcing(d) Vendor networks(e) Third-party logistics. Answer this imagine please 2.1 [2] As more resistors are added in series, the equivalent resistance of the circuit approaches infinity. In contrast, as more resistors are added in parallel, the equivalent resistance a. approaches infinity b. approaches zero c. becomes zero d. approaches 1 2.2 [2] Kirchhoff's loop rule is equivalent to which of the following principles? a. conservation of charge b. conservation of energy c. conservation of mass d. conservation of force Given that mA=(16x), mC=(8x+20), and mD=128, what is mB how can you convert a given number of fluid ounces to find equivalent number of cups explian fill in the blank question. special rocks found in antarctica are dated with isotopes to give an average age of earth of 4.55 billion years. we can use these dark-colored Introduce and cite the following quote Passage 1 An Overview of the Great Depression by Jessica McBirney.Without steady income, many families were forced out of their homes. From Page 1.