Answer:
False.
Explanation:
the push up is dynamic or static
Answer:
Dynamic exercises
Explanation:
10. What is Newton's 3rd Law?
O A. For every action there is an equal and opposite reaction.
B. Acceleration depends on two variables, the mass of the object and the amount of
force.
C. An object at rest will stay at rest, an object in motion will stay in motion, unless an
unbalanced force acts upon it.
D. The amount of matter in an object.
7. What is Newton's 2nd Law? *
Answer:
A. For every action there is an equal and opposite reaction.
PLZ HELPPPP!!
this question is about popping microwave popcorn:
If you turn the microwave on for two minutes, is the rate of popping always the same, or does it change? Explain.
No,the poping of microvave is not same there time is different
cuantos metros hay en 100cm?
Answer: 100cm = 1 meter.
Centi is 100, therefor meaning that 100cm is exactly 1 meter.
I hope this helps!
 A wooden box with a mass of 10.0 kg rest on a ramp that is incline at an angle of 25° to the horizontal. A rope attached to the box runs parallel to the ramp and then passes over a frictionless bully. A bucket with a mass of M hangs at the end of the rope. The coefficient of static friction between the ramp in the box is 0.50. The coefficient of Connecticut friction between the ramp in the box is 0.35.
Suppose the box remains at rest relative to the ramp. What is the maximum magnitude of the friction force exerted on the box by the ramp?
The maximum magnitude of the friction force exerted on the box by the ramp is 44.41 N.
The given parameters;
Mass of the box, m = 10 kgInclination of the ramp, θ = 25⁰Coefficient of static friction, μ = 0.5 Coefficient of kinetic friction, μk = 0.35The normal force on the wooden box is calculated as follows;
[tex]F_n = mg \times cos(\theta)\\\\F_n = 10 \times 9.8 \times cos(25)\\\\F_n = 88.8 2 \ N[/tex]
The maximum magnitude of the friction force exerted on the box by the ramp is calculated as follows;
[tex]F_f = \mu \times F_n\\\\F_f = 0.5 \times 88.82 \\\\F_f = 44.41 \ N[/tex]
Learn more about static frictional forces here: https://brainly.com/question/4515354
What is Motion ?????
Answer:
the action or process of moving or being moved.
Explanation:
which an object changes its position over time
What is 1 radian approximately in degrees?
Answer:
180 LUV:)
Explanation:
Alicia is naturally rather shy and is graduating from college. She will need to find a job, so she is starting to go on job websites and work on her
resume. She knows she should network, but it sounds a little intimidating. What is the BEST advice for Alicia?
ОА. If she is not comfortable networking, she will never find a job.
ОВ. The majority of jobs are found through networking, so she should really try it.
OC. Networking is overrated, so she can skip that part of the job search process.
OD If she is naturally shy, she probably has really poor social skills and should work on that.
Answer:
OB and i have no reasoning
¿Por qué el origen de ciertos metales se relaciona con la dinámica terrestre?
There are 270 students and teachers going on a field trip to a science center. If each school bus holds 54 people, how many buses are needed?
Which light is most sensitive to the eyes?
Answer:
Our eyes are most sensitive to the wavelengths corresponding to the yellow and green colors of the spectrum. Flashy signs and some fire engines are painted in a yellowish-green color to attract our attention.
i’m confused on this worksheet can someone help
Answer:
well for C the horse is at rest at 10 to 15
D is 0 to 10
E is 15 to 25
Explanation:
If you search up examples it will help with this worksheet.
If I am work then I appologize
The speed of light inside a medium is (2.0 x 10^8m/s) What is the index of refraction (n) of the medium?
Answer:
Refractive index of a medium = Speed of light in vacuum/Speed of light in a medium
1.5 = 3 x 108 / Speed of light in medium
Speed of light in the medium = 3 x 108 /1.5
= 2 x 108 m/s.
Explanation:
TRUE OR FALSE! PLZ HELP
Magnitude is a measure of how strong a force is.
A. True
B. False
Answer:
True
Explanation:
Magnitude is the "value" the greater the value the greater the force is and vice versa
Answer:
TRUE
Explanation: I did the test
Hope this helps
A tuning fork of frequency 254 Hz and an open orang pipe of slightly lower frequency are at 15oC. When
sounded together, they produce 4 beats per second. On altering the temperature of the air in the pipes,
it is observed that the number of beats per second first diminishes to zero and then increases again to 4.
By how much has the temperature of the air in the pipe been altered?
The temperature of the air in the open orang pipe has been altered by 18.73° C
The frequency of an open orang pipe is estimated by using the formula:
[tex]\mathbf{f = \dfrac{v}{2L}}[/tex]
Then, the combination of the frequency of the tuning fork and the open orang pipe is:
[tex]\mathbf{254 - \dfrac{v}{2L} }[/tex]
These combinations of frequency produce 4 beats per sound.
i.e.
[tex]\mathbf{254 - \dfrac{v}{2L} =4}[/tex]
[tex]\mathbf{ \dfrac{v}{2L} = 254-4 }[/tex]
[tex]\mathbf{ \dfrac{v}{2L} = 250 ----(1)}[/tex]
When it is altered, the beats first diminish and increase again by 4.
i.e.
[tex]\mathbf{ \dfrac{v'}{2L} = 254+4 }[/tex]
[tex]\mathbf{ \dfrac{v'}{2L} = 258 --- (2) }[/tex]
If we equate both equations (1) and (2) together, we have:
[tex]\mathbf{\dfrac{v'}{v}= \dfrac{258}{250}}[/tex]
However, from our previous knowledge, we understand that the velocity of an object varies directly proportional to the square root of its temperature.
Hence;
when the temperature of the pipe = unknown ???the temperature of the open orang pipe = 15∴
[tex]\implies \mathbf{\sqrt{\Big(\dfrac{273 + T}{273 + 15}\Big)}= \dfrac{258}{250}}[/tex]
By squaring both sides, we have:
[tex]\implies \mathbf{\Big(\dfrac{273 + T}{273 + 15}\Big)}= \Big (\dfrac{258}{250}\Big )^2}[/tex]
[tex]\implies \mathbf{\Big(\dfrac{273 + T}{273 + 15}\Big)= \Big (\dfrac{66564}{62500}\Big )}[/tex]
[tex]\implies \mathbf{\Big(\dfrac{273 + T}{288}\Big)= \Big (1.065024\Big )}[/tex]
[tex]\implies \mathbf{273 +T =306.726912 }[/tex]
T = 306.726912 - 273
T ≅ 33.73 ° C
∴
The change in temperature ΔT = 33.73° C - 15° C
The change in temperature ΔT = 18.73° C
Learn more about wave frequency here:
https://brainly.com/question/14316711?referrer=searchResults
Heat is transferred from molecules with more kinetic energy to molecules with _________kinetic energy.
Answer:
less
Explanation:
heat travels from hotter to colder object. hotter object has more kinetic energy.
what is the specific latent heat of fusion of water?
Answer:
334
Explanation:
A 67 kg soccer player uses 5100 kJ of energy during a 2.0 h match. What is the
average power produced by the soccer player?
The average power produced by the soccer player is 710 Watts.
Given the data in the question;
Mass of the soccer player; [tex]m = 67kg[/tex]Energy used by the soccer player; [tex]E = 5100KJ = 5100000J[/tex]Time; [tex]t = 2.0h = 7200s[/tex]Power; [tex]P =\ ?[/tex]
Power is simply the amount of energy converted or transferred per unit time. It is expressed as:
[tex]Power = \frac{Energy\ converted }{time}[/tex]
We substitute our given values into the equation
[tex]Power = \frac{5100000J}{7200s}\\\\Power = 708.33J/s \\\\Power = 710J/s \ \ \ \ \ [ 2\ Significant\ Figures]\\\\Power = 710W[/tex]
Therefore, the average power produced by the soccer player is 710 Watts.
Learn more: https://brainly.com/question/20953664
What is the volume of 150g of a substance that has a density of 150g of a substance that has a density of 11.3g/cm3
Answer:
25.0 cm3
Explanation:
The volume is 25.0 cm3 .
Using the expression for the total energy of this system, it is possible to show that after the switch is closed, d2qdt2=−kq, where k is a constant. Find the value of the constant k.
The value of the constant K is [tex]\mathbf{K = \dfrac{1}{LC}}[/tex]
According to Kirchhoff's loop rule, the total algebraic sum of potential differences in any loop, combining voltage provided by voltage sources as well as resistive components, must equal zero.
Thus, the relation for Kirchhoff's loop rule can be expressed as:
[tex]\mathbf{\dfrac{q}{c}- L\dfrac{dI}{dt} = 0}[/tex]
We all know that the current in the nonconstant charge flow can be written as:
[tex]\mathbf{I = \dfrac{dq}{dt}}[/tex]
∴
Replacing the current (I) into Kirchhoff's loop rule, we have:
[tex]\mathbf{ L\dfrac{d}{dt} ( \dfrac{dq}{dt})= -\dfrac{q}{c}}[/tex]
[tex]\mathbf{ \dfrac{d^2q}{dt^2}= -\dfrac{q}{Lc} \ \ ---(1)}[/tex]
From the given question, when the switch is closed
[tex]\mathbf{ \dfrac{d^2q}{dt^2}= -kq\ \ ---(2)}[/tex]
Then, the charges on the capacitor start to b, resulting in the rise of the current in the circuit.
∴
By equating both equations (1) and (2);
[tex]\mathbf{K = \dfrac{1}{LC}}[/tex]
Learn more about Kirchhoff's loop rule here:
https://brainly.com/question/14681219?referrer=searchResults
We have seen in earlier readings how to determine the speed of a wave on a string. What will happen to the wavelength of a sinusoidal wave on a string if the tension in the string is increased (assuming we keep the frequency of the wave the same)
This question involves the concepts of tension in a string and the wavelength of the wave in a string.
The wavelength of a sinusoidal wave will "increase by square power" on a string if the tension in the string is increased when the frequency is kept constant.
The speed of a wave on a string is given by the following formula:
[tex]v=\sqrt{\frac{T}{\mu}}[/tex]
where,
v = speed of wave = fλ
f = frequency of the wave
λ = wavelength of the wave
T = tension force
μ = linear mass density of the string
Therefore,
[tex]f\lambda=\sqrt{\frac{T}{\mu}}\\\\T = f^2\lambda^2\mu[/tex]
It is given that the frequency is kept constant. The linear mass density is also constant for a string. Therefore,
[tex]T=(constant)\lambda^2\\T\ \alpha\ \lambda^2[/tex]
Learn more about string tension here:
https://brainly.com/question/4087119?referrer=searchResults
The passage of a wave through a medium is...?
Answer:
Transmission
Explanation:
It’s the passage of electromagnetic waves through a medium.
The passage of a wave through a medium is known as transmission.
What is the transmission of a wave?The transmission of waves may be characterized as a wave traveling through a medium or into a new medium. Not all waves transmit through the same materials. It significantly depends on the type of wave, the type of material, and even the frequency of the wave.
Transmission is generally the passage of electromagnetic radiation through a medium. While Reflection is the process by which electromagnetic radiation is returned either at the boundary between two media (surface reflection) or at the interior of a medium (volume reflection).
Waves can go through things. Waves go through water, light can pass through the glass, and sound can pass through walls. The material the wave passes through is called a medium. A single disturbance passing through a medium is called a pulse.
Therefore, the passage of a wave through a medium is known as transmission.
To learn more about the Transmission of the wave, refer to the link:
https://brainly.com/question/27844842
#SPJ6
which statement is true about heat and light energy
Answer:
statements?
Explanation:
I will mark brainlist
If a wave’s amplitude is 2cm, then its height is equal to:
5 cm.
0 cm
4 cm.
2 cm
Answer:
4 cm
Explanation:
Amplitude is the measure from the MIDLINE to the peak of the wave....so the wave HEIGHT is twice the ampltude
2 x 2 cm = 4 cm
Ignoring any effects of dc resistance, what is the total reactance of a 250 mH coil in series with a 4.7 microfarad capacitor at a signal frequency of 60 Hz
The total reactance of the inductor and the capacitor is 470.1 ohms.
The given parameters;
inductance of the coil, L = 250 mHcapacitance, C = 4.7 μfrequency of the circuit, f = 60 HzThe inductive reactance of the coil is calculated as follows;
[tex]X_l = \omega L\\\\X_l = 2\pi f L\\\\X_l = 2\pi \times 60 \times 250 \times 10^{-3}\\\\X_l = 94.26 \ ohms[/tex]
The capacitive reactance of the capacitor is calculated as follows;
[tex]X_c = \frac{1}{\omega C} \\\\X_c = \frac{1}{2\pi f C} \\\\X_c = \frac{1}{2\pi \times 60 \times 4.7 \times 10^{-6}} \\\\X_c = 564.31 \ ohms[/tex]
The impedance of the circuit is calculated as follows;
[tex]Z = \sqrt{(X_c - X_l)^2} \\\\Z = X_c - X_l\\\\Z = 564.31 - 94.26\\\\Z = 470.1 \ ohms[/tex]
Thus, the total reactance of the inductor and the capacitor is 470.1 ohms.
Learn more here:https://brainly.com/question/10886711
This drawing of the field lines between these two charged plates is correct.
True or false
Answer:
True
Explanation:
Since positive and negative forces are both opposites of each other they attract. But if the forces are the same where both are positive or negative thye repel do to being the same charges in that case the picture would show lines moving in opposite directions.
Light bulbs produce useful energy in the form of light and waste energy in the form of heat. What kind of light bulb would you use
to incubate eggs?
A. low-efficiency light bulbs, because they produce more light
B. low-efficiency light bulbs, because they produce more heat
C. high-efficiency light bulbs, because they produce more heat
D. high-efficiency light bulbs, because they produce more light
Answer:
C) high efficiency light bulbs, because they produce more heat
Light bulbs produce useful energy in the form of light and waste energy in the form of heat, the kind of light bulb would you use to incubate eggs are low-efficiency light bulbs, because they produce more heat, therefore the correct answer is option B.
What is thermal energy?It can be defined as the form of the energy in which heat is transferred from one body to another body due to their molecular movements, thermal energy is also known as heat energy.
The type of light bulb you would use to incubate eggs is a low-efficiency light bulb since they produce more heat; consequently, option B is the right response. Light bulbs produce useful energy in the form of light and waste energy in the form of heat.
To learn more about thermal energy here, refer to the link given below ;
brainly.com/question/3022807
#SPJ2
In an oscillating LC circuit, when 81.0% of the total energy is stored in the inductor's magnetic field, (a) what multiple of the maximum charge is on the capacitor and (b) what multiple of the maximum current is in the inductor
Answer:
21
Explanation:
9+10=21
An electron is held up against the force of gravity by the attraction of a fixed proton some distance above it. How far above the electron is the proton
5.08 m
Explanation:
The weight of the electron is being counteracted by the attractive electrostatic force exerted by the proton above it. We can write the force equation as follows:
[tex]m_eg = k_e\dfrac{Q_pQ_e}{r^2}[/tex]
where the Q's are the charges of the proton and electron, r is the distance between the particles, g is the acceleration due to gravity, [tex]m_e[/tex] is the mass of the electrons and [tex]k_e[/tex] is the Coulomb constant. So solving for r, we get
[tex]r^2 = k_e\dfrac{Q_pQ_e}{m_eg}[/tex]
Taking the square root of r^2, we then get the distance as
[tex]r = \sqrt{k_e\dfrac{Q_pQ_e}{m_eg}}[/tex]
The values are given as follows:
[tex]m_e = 9.11×10^{-31}\:\text{kg}[/tex]
[tex]g = 9.8\:\text{m/s}^2[/tex]
[tex]Q_p = Q_e = 1.60×10^{-19}\:\text{C}[/tex]
[tex]k_e = 8.99×10^9\:\text{N-m}^2\text{/C}^2[/tex]
Putting in all of these values in our equation for r,
[tex]r = \sqrt{\dfrac{(8.99×10^9\:\text{N-m}^2\text{/C}^2)(1.60×10^{-19}\:\text{C})^2}{(9.11×10^{-31}\:\text{kg})(9.8\:\text{m/s}^2)}}[/tex]
[tex]\:\:\:\:\:= 5.08\:\text{m}[/tex]
20 cm long 10 cm wide and 5 cm thick as a mass of 500 g determine the greatest pressure that can be exerted by block on the flat surface?
100000 Pascal
Explanation:
pressure= force/area
Max pressure= force/min area
so f=5
min area= 5×10^-5
5÷5*10^-5 = 100000pascal
