The characteristic of science that is missing from this experiment is that "the results are not reliable because the airplanes were only tested one time".
Some of the characteristics of science include objectivity, verifiability , reliability, accuracy, observable, precision etc.
Based on the question asked, the results of the experiment are not reliable due to the fact that the the airplanes were only tested one time. The airplanes should have been tested multiple times to show that they are reliable.
In conclusion, the correct option is D.
Read related link on:
https://brainly.com/question/5500131
Answer:
D
Explanation:
Would you categorize temperature as an Intensive or extensive property explain plz !!!
Extensive properties depend on the amount of matter in a sample, While Intensive properties do not depend on the amount of matter in a substance.
~
literally anyone pls
Answer:
0.5851 g/cm3
Explanation:
(45.62) ÷ (4.272)³ = 0.5851
What does a virus inject into a cell?
Answer:
The virus's genome is uncoated from the protein and injected into the host cell.
Explanation:
Convert to standard notation.
9.3 x 10^-5
Answer:
9.3 x 10^ -5 in standard notation is 0.000093
Explanation:
Since 10 is raised to a -5, this means that there should be 5 zeros before the non-zero digits
Balancing oxidation-reduction reactions
Mg+ N2—>Mg3N2
Answer:
[tex]{ \sf{3Mg_{(s)} + N_{2(g)} →Mg _{3}N_{2(s)}}}[/tex]
What is the density of water (in g/mL) to fouf significant figures at 6°C?
Answer :
0.9999432 g/cm^3
The density of water in g/ml up to 4 significant figures at 6°C is 0.9999432 g/cm³.
What are significant figures?Significant figures are used for establishment of a number which is presented in the form of digits. These digits give a meaningful representation to the numbers.
The significant figures are the significant digits which convey the meaning according to the accuracy. These provide precision to the numbers and hence are called as significant numbers.There are rules for counting significant figures which are as follows:
1)All non-zero digits are significant .
2)All zeroes which occur between non-zero digits are significant.
3)All zeroes to the left and right of a non-zero digit are not significant.
4) All zeroes on right of decimal are significant if a non-zero number follows them.
5)All zeroes on right side of non-zero digit are significant
Learn more about significant figures,here:
https://brainly.com/question/29153641
#SPJ2
Which statement describes a numerical result with good precision?
Answer:
poop
Explanation:
MAY SOMEONE HELP ME PLZZ
A tire company wants to determine what kind of rubber will last the longest for their tires. What are some variables that the researchers will want to make controlled variables?
Answer: Rubber source, temperature, thinkness, thread design, driving pattenrs, weather, etc.
Explanation: There are many variables. Here are a few I would include in a tire lifetime study:
1. Type of rubber, including source
2. Thickness of tire
3. Design of tire thread
4. Life as a function of average speed and road surface
5. Expected outside temperature and wet conditions
6. Driving conditions of speed and both acceleration and deceleration parameters (e.g., tire life when slamming on the brakes or accelerating quickly)
Cuales son los elementos (de la tabla periodica) que contienen los seres inertes (minerales)
Osea por ejemplo las piedras, el agua, la tierra, cuales son los elementos del universo que conforman cosas no-vivas?
The phenomenon where an electric current is produced by shining a light on a metal plate is called the ________ effect. The minimum frequency required to cause to flow is called the ________ frequency. This frequency depends on the identity of the metal used.
Answer:
Photoelectric, Threshold
Explanation:
Your welcome
what will happen to the atoms or sbstance when it is condenses
Answer:
Hey mate.....
Explanation:
This is ur answer.....
Condensation happens when molecules in a gas cool down. As the molecules lose heat, they lose energy and slow down. They move closer to other gas molecules. Finally these molecules collect together to form a liquid.
Hope it helps!
Brainliest pls!
Follow me! :)
GIVING 20 POINTS!! Apply Concepts Two chemists each plan an investigation in which they will combine hydrogen gas with chlorine gas to observe the chemical reactivity. The plans differ in that one will use 25 milligrams each of hydrogen and chlorine, and the other will use 1000 times this amount, i.e., 25 grams each of hydrogen and chlorine. Can the investigations reach similar conclusions about the reactivity of hydrogen with chlorine? Explain.
Answer:
Yes, the investigations will reach similar conclusions about the reactivity of H2 and Cl2
Explanation:
1. The law of multiple proportions says that when elements form compounds, the proportions of the elements in those chemical compounds can be expressed in small whole number ratios. This means that regardless of whether 1000 times more of the products are used, the reactivity of the products is established by the chemical reaction
2. The law of multiple proportions is an extension of the law of definite composition, which states that compounds will consist of defined ratios of elements.
3. A reaction with more reactants will need more care because more products are produced, which can be toxic
4. H2 and Cl2 reactivity does not depend on the quantities but the chemical properties of each compound
5. Which state(s) of matter |s/ar epsilon easily compressible? Select all that apply.
-liquid
-solid
-gas
-none
Answer:
Gas
Explanation:
The atoms, ions, or molecules that make up the gas are further apart and move freely at high speeds and is can easily be compressible.
Answer:
Gas
Explanation:
A gas is a substance or matter in a state in which it will expand freely to fill the whole of a container' having no shape like a solid and no fixed volume like a liquid.
Help me with this easy chemical change question!!!!
Answer:
1, just I) color.
Physical properties are the properties that can be observed without changing the composition of a substance, such as color, temperature, density, and boiling point.
A physical change is a change in the substance that only modifies its aggregation state, such as solidification, and boiling.
Chemical properties are the properties that need a reaction to being observed, such as combustibility, which needs a combustion reaction to being quantified.
When a chemical reaction occurs, and the composition of the substance change, it's a chemical change.
So, heating copper with carbon is a chemical reaction, and purification by electrolysis is too. Color is the only physical property.
Which is larger?
1). 1 liter or 1500 milliliters
2) 12 cm or 12 milliliters
Answer:
1). 1 litre
2).12 cm
Explanation:
In 1 litre = 1000 ml whereas 1500 milliliters equals 0.15 litres and it is same for 12 cm and 12 milliliters
600mL of a gas at 27◦C and 1atm pressure is heated to 177◦C. What pressure Must be applied to the gas in order to maintain the same volume?
Answer:
gkfbhs DC hdshgagfzh
PLEASE HELP ON EASY CHEMICAL PROPERTIES
Answer:
1, just I) color.
Explanation:
Physical properties are the properties that can be observed without changing the composition of a substance, such as color, temperature, density, and boiling point.
A physical change is a change in the substance that only modifies its aggregation state, such as solidification, and boiling.
Chemical properties are the properties that need a reaction to being observed, such as combustibility, which needs a combustion reaction to being quantified.
When a chemical reaction occurs, and the composition of the substance change, it's a chemical change.
So, heating copper with carbon is a chemical reaction, and purification by electrolysis is too. Color is the only physical property.
How is the atomic mass of an element determined?
A. by adding the masses of the protons and electrons
B. by adding the masses of the neutrons and electrons
C. by determining the number of protons
D. by adding the masses of the protons, neutrons, and electrons
Answer:
D
Explanation:
Atomic mass is the total mass of protons, neutrons and electrons of an atom at rest
Write a word equation for the chemical reaction.
I’ll brainlist.
Answer:
potassium hydroxide + sulfuric acid → potassium sulfate + water.
Explanation:
Hope it helps.. if yes, plz mark me as brainliest
what is true about chemicals?
A. Chemicals are rarely found on earth
B. Chemicals are never dangerous
C. Chemicals are in many substances in a home
D. Things containing chemicals always cost a lot of money
hi <3
i believe the correct option would be C
hope this helps :)
difference between Ammonia and ammonium..
plz do not scam
if you have observed something about the world and want to investigate it further, what are you seeking to do?
I'm seeking to ASK A QUESTION in accordance to the scientific method.
WHAT IS SCIENTIFIC METHOD:
Scientific method is the step by step procedure employed by scientists in order to investigate an occurrence or phenomenon in the world.The steps involved in the scientific method, which begins with making an observation, are as follows:
Make an observationAsk a question based on the observationFormulate a hypothesisTest the hypothesis via experimentationAnalyze result dataDraw conclusionAccording to this question, after observing something about the world and I want to investigate it further by asking a question as the next step.
Learn more: https://brainly.com/question/7508826
H2O, OH
H2O, HCN
CN, OH
CN–, H2O
Answer:
The choose 2. H2O , HCN
I hope I helped you^_^
Describe hydrogen's atomic structure and its molecular structure.
Explanation:
A hydrogen atom is an atom of the chemical element hydrogen. The electrically neutral atom contains a single positively charged proton and a single negatively charged electron bound to the nucleus by the Coulomb force. Atomic hydrogen constitutes about 75% of the baryonic mass of the universe.
Names: hydrogen atom, H-1, protium, ¹H
Protons: 1
Neutrons: 0
Symbol: 1H
Answer:
The hydrogen atom has a nucleus consisting of a proton bearing one unit of positive electrical charge; an electron, bearing one unit of negative electrical charge, is also associated with this nucleus.
Explanation:
1. Based on the Law of Conservation of Mass, if
100g of sodium metal reacts with 25g of
chlorine gas, what will be the total mass of the
product, sodium chloride, created in the
chemical reaction?
2 Na Cl2
2NaCl
100gm + 25gm
+
?
[tex]\boxed{\sf {Na\atop Sodium}+{Cl\atop Chlorine}\longrightarrow {NaCl\atop Sodium Chloride}}[/tex]
Na=100gCl=25g.Mass of reactants :-[tex]\\ \sf\longmapsto Na+Cl[/tex]
[tex]\\ \sf\longmapsto 100+25[/tex]
[tex]\\ \sf\longmapsto 125g[/tex]
Mass of NaCl=125g
Drag the appropriate answer to the correct location on the concept map below.
what is combination reaction give two examples
What should a prepositional phrase include after the preposition?
A.a noun and its modifiers
B.an adjective and an adverb
C.a subject and a predicate
D.an object and its modifiers
Answer:
B
Explanation:
A prepositional phrase should include after the preposition an object and its modifiers. The correct option is D.
What are prepositional phrases?A prepositional phrase is a group of words that contain a preposition with its object and the words that modify it. These are the words that change verbs and nouns.
For example, Mansi is going out with handsome Brian. Brian is the object and the beautiful is the prepositional phrase. The three types of prepositional phrases are:
Adverb prepositional phrases.Adjective prepositional phrases.Prepositional phrases, behave as nouns.If there are two prepositional phrases used in one sentence. The other prepositional phrase will be used as an adverb.
Thus, the correct option is D. an object and its modifiers.
To learn more about prepositional phrases, refer to the link:
https://brainly.com/question/17542837
#SPJ6
What is the density of a piece of metal with a
mass of 23.5 g and a volume of 11.1 mL? You
will report in units of g/mL. Please answer only
with a number. Include only two decimals in
your answer.
The density of the piece of metal is 2.12g/mL
HOW TO CALCULATE DENSITY:
Density, which refers to the mass of an object in relation to its volume, can be calculated by dividing mass by volume. That is;Density (g/mL) = mass (g) ÷ volume (mL)
According to this question, a piece of metal has a mass of 23.5 g and a volume of 11.1 mL, hence, the density can be calculated as follows:Density = 23.5/11.1
Density = 2.12g/mL
Learn more: https://brainly.com/question/2040396
What is the function of phloem tissue in the plant transport system?
A.it prepares food
B.it transports food
C.it transports water
D.it provides support
Answer:
option B is the right answer it helps in transfer of food.
