Two resistors with resistance values of 4.5 Ω and 2.3 Ω are connected in series or parallel

across a 30 V potential difference to a light bulb.

a. Calculate the current delivered through the light bulb in the two cases.

b. Draw the circuit connection that will achieve the brightest light bulb.​

Answers

Answer 1

Explanation:

Given that,

Two resistors 4.5 Ω and 2.3 Ω .

Potential difference = 30 V

When they are in series, the current through each resistor remains the same. First find the equivalent resistance.

R' = 4.5 + 2.3

= 6.8 Ω

Current,

[tex]I=\dfrac{V}{R'}\\\\I=\dfrac{30}{6.8}\\\\=4.41\ A[/tex]

So, the current through both lightbulb is the same i.e. 4.41 A.

When they are in parallel, the current divides.

Current flowing in 4.5 resistor,

[tex]I_1=\dfrac{V}{R_1}\\\\=\dfrac{30}{4.5}\\\\I_1=6.7\ A[/tex]

Current flowing in 2.3 ohm resistor,

[tex]I_2=\dfrac{V}{R_2}\\\\=\dfrac{30}{2.3}\\\\I_2=13.04[/tex]

In parallel combination, are brighter than bulbs in series.

Two Resistors With Resistance Values Of 4.5 And 2.3 Are Connected In Series Or Parallel Across A 30 V

Related Questions

The same constant force is used to accelerate two carts of the same mass, initially at rest, on horizontal frictionless tracks. The force is applied to cart A for twice as long a time as it is applied to cart B. The work the force does on A is WA; that on B is WB. Which statement is correct?

a. WA = WB
b. WA = 2WB.
c. WA=4WB
d. WB= 2WA

Answers

Answer:

Option (c).

Explanation:

Let the mass of each cart is m and the force is F.

Time for cart A is 2t and for cart B is t.

Work done is given by the

W= force x displacement

As the distance is given by

S= u t +0.5 at^2

So, when the time is doubled the distance is four times.

So, WA = F x 4 S

WB = F x S

WA= 4 WB

A T-shirt cannon launches a shirt at 5.30 m/s from a platform height of 4.00 m from ground level. How fast (in m/s) will the shirt be traveling if it is caught by someone whose hands are at 5.20 m from ground level (b) 4.00 m from ground level?

Answers

Answer:

(a) the velocity of the shirt is 2.14 m/s

(b) the velocity of the shirt is 5.3 m/s

Explanation:

Given;

initial velocity of the shirt, u = 5.3 m/s

height of the platform above the ground, h = 4.00 m

(a) When the shirt is caught by someone whose hand is 5.20 m from the ground level, the height traveled by the shirt = 5.2 m - 4.0 m = 1.2 m

The velocity at this position is calculated as;

[tex]v^2 = u^2 + 2(-g)h\\\\v^2 = u^2 - 2gh\\\\v^2 = 5.3^2 - (2\times 9.8 \times 1.2)\\\\v^2 = 4.57\\\\v= \sqrt{4.57} \\\\v = 2.14 \ m/s[/tex]

(b) When the shirt is caught by someone whose hand is 4.00 m from the ground level, the height traveled by the shirt = 4.00 m - 4.00 m = 0 m

The velocity at this position is calculated as;

[tex]v^2 = u^2 + 2(-g)h\\\\v^2 = u^2 - 2gh\\\\v^2 = 5.3^2 - (2\times 9.8 \times 0)\\\\v^2 = 28.09\\\\v= \sqrt{28.09} \\\\v = 5.3 \ m/s[/tex]

Object A has a mass m and a speed v, object B has a mass m/2 and a speed 4v, and object C has a mass 3m and a speed v/3. Rank the objects according to the magnitude of their momentum.

Required:
Rank from smallest to largest.

Answers

Answer:

Momentum of object A = Momentum of object C < momentum of B.

Explanation:

The momentum of an object is equal to the product of mass and velocity.

Object A has a mass m and a speed v. Its momentum is :

p = mv

Object B has a mass m/2 and a speed 4v. Its momentum is :

p = (m/2)×4v = 2mv

Object C has a mass 3m and a speed v/3. Its momentum is :

p = (3m)×(v/3) = mv

So,

Momentum of object A = Momentum of object C < momentum of B.

In a physics lab, light with a wavelength of 560 nm travels in air from a laser to a photocell in a time of 17.2 ns . When a slab of glass with a thickness of 0.810 m is placed in the light beam, with the beam incident along the normal to the parallel faces of the slab, it takes the light a time of 20.8 ns to travel from the laser to the photocell.

Required:
What is the wavelength of the light in the glass?

Answers

Answer:

Distance traveled = 3 * 10E8 * 17.2 * 10E-9 = 5.16 m

.81 / 3 * 10E8 = 2.7 * 10E-9    normal time thru glass

(20.8 - 17.2) * E10-9 = 3.6 * 10E-9   additional time due to glass

c tg = c n ta      where tg and ta are the times spent in glass and air

(Note you can also write Va = n Vg  or  D / ta = n D / tg)

n = tg / ta = 3.6 / 2.7 = 1.33 the index of refraction of the glass

Wavelength (air) = Wavelength (glass) * n

Wavelenght = 560 nm / 1.33 = 421 nm

A baseball pitcher brings his arm forward during a pitch, rotating the forearm about the elbow. If the velocity of the ball in the pitcher's hand is 34.0 m/s and the ball is 0.310 m from the elbow joint, what is the angular velocity (in rad/s) of the forearm

Answers

Answer:

[tex]\omega=109.67\ rad/s[/tex]

Explanation:

Given that,

The speed of the ball, u = 34 m/s

The ball is 0.310 m from the elbow joint.

We need to find the angular velocity (in rad/s) of the forearm.

We know that,

[tex]v=r\omega\\\\\omega=\dfrac{v}{r}\\\\\omega=\dfrac{34}{0.31}\\\\\omega=109.67\ rad/s[/tex]

So, the required angular velocity of the forearm is 109.67 rad/s.

What is the approximate radius of an equipotential spherical surface of 30 V about a point charge of +15 nC if the potential at an infinite distance from the surface is zero?

Answers

Answer:

V = k Q / R       potential at distance R for a charge Q

R = k Q / V

R = 9 * 10E9 * 15 * 10E-9 / 30 = 9 * 15 / 30 = 4.5 m

Note: Our equation says that if R if infinite then V must be zero.

A 12.0 g sample of gas occupies 19.2 L at STP. what is the of moles and molecular weight of this gas?​

Answers

At STP, 1 mole of an ideal gas occupies a volume of about 22.4 L. So if n is the number of moles of this gas, then

n / (19.2 L) = (1 mole) / (22.4 L)   ==>   n = (19.2 L•mole) / (22.4 L) ≈ 0.857 mol

If the sample has a mass of 12.0 g, then its molecular weight is

(12.0 g) / n14.0 g/mol

During a particular thunderstorm, the electric potential difference between a cloud and the ground is Vcloud - Vground = 4.20 108 V, with the cloud being at the higher potential. What is the change in an electron's electric potential energy when the electron moves from the ground to the cloud?

Answers

Answer:

The electric potential energy is 6.72 x 10^-11 J.

Explanation:

Potential difference, V = 4.2 x 10^8 V

charge of electron, q = - 1.6 x 10^-19 C

Let the potential energy is U.

U = q V

U = 1.6 x 10^-19 x 4.2 x 10^8

U = 6.72 x 10^-11 J

In a large chemical factory, a feed pipe carries a liquid at a speed of 5.5 m/s. A pump pushes the liquid along at a gauge pressure of 140,000 Pa. The liquid travels upward 6.0 m and enters a tank at a gauge pressure of 2,000 Pa. The diameter of the pipe remains constant. At what speed does the liquid enter the tank

Answers

Answer:

v₂ = 15.24 m / s

Explanation:

This is an exercise in fluid mechanics

Let's write Bernoulli's equation, where the subscript 1 is for the factory pipe and the subscript 2 is for the tank.

          P₁ + ½ ρ v₁² + ρ g y₁ = P₂ + ½ ρ v₂² + ρ g y₂

They indicate the pressure in the factory P₁ = 140000 Pa, the velocity

v₁ = 5.5 m / s and the initial height is zero y₁ = 0

the tank is at a pressure of P2 = 2000 Pa and a height of y₂ = 6.0 m

          P₁ -P₂ + ρ g (y₁ -y₂) + ½ ρ v₁² = ½ ρ v₂²

           

let's calculate

         140,000 - 2000 + ρ 9.8 (0- 6) + ½ ρ 5.5² = ½ ρ v₂²

         138000 - ρ 58.8 + ρ 15.125 = ½ ρ v2²

         v₂² = 2 (138000 /ρ - 58.8 + 15.125)

         v₂ = [tex]\sqrt{\frac{276000}{\rho } - 43.675 }[/tex]

In the exercise they do not indicate what type of liquid is being used, suppose it is water with

           ρ = 1000 kg / m³

           v₂ = [tex]\sqrt{\frac{276000}{1000} - 43.675}[/tex]

           v₂ = 15.24 m / s

The elastic extensibility of a piece of string is .08. If the string is 100 cm long, how long will the string be when it is stretched to the point where it becomes plastic?

Answers

Answer:

The elastic extensibility of a piece of string is .08. If the string is 100 cm long, how long will the string be when it is stretched to the point where it becomes plastic? is your ansewer dont take tension

The string will be 108 cm long when it is stretched to the point where it becomes plastic.

What is elasticity?

Elasticity in physics and materials science refers to a body's capacity to withstand a force that causes distortion and to recover its original dimensions once the force has been withdrawn.

When sufficient loads are applied, solid objects will deform; if the material is elastic, the object will return to its original size and shape after the weights have been removed. Unlike plasticity, which prevents this from happening and causes the item to stay deformed,

Given parameters:

The elastic extensibility of a piece of string is 0.08.

The string is 100 cm long.

Hence,  it becomes plastic, after  it is stretched up to = 100 × 0.08 cm = 8 cm.  The string will be 108 cm long.

Learn more about elasticity here:

https://brainly.com/question/28790459

#SPJ5

A positive statement is:________. a. reflects oneâs opinions. b. can be shown to be correct or incorrect. c. a value judgment. d. based upon an optimistic judgment.

Answers

Answer:

b

Explanation:

3. If you change the resistance of the resistor:
a. How does the current through the circuit change? (answer, explain, evidence)
b. How does the voltage of the battery change? (answer, explain, evidence)

Answers

Answer:

Explanation:

Changing the resistance of a resistor means the resistance is either increased or decreased.

a. When the resistance of the resistor is increased, the value of current flowing through the circuit decreases.

Example: given voltage of 6V, and a resistance of 30 Ohm's. The value of current flowing in the circuit is;

V = IR

6 = I x 30

I = 0.2 A

If the resistance is changed to 50 Ohm's, then:

I = 0.12 A

(ii) When the resistance of the resistor is decreased, the value of the current flowing through the circuit increases.

In the previous example, if the resistance is changed to 5 Ohm's, then:

V = IR

6 = I x 5

I = 1.2 A

(b) The voltage of the battery does not change since it is directly proportional to the current flowing through the circuit. Consider the examples stated above.

The thermal efficiency (in %) of a system that undergoes a power cycle while receiving 1000 kJ of energy by heat transfer from a hot reservoir at 1000 K and discharging 500 kJ of energy by heat transfer to a cold reservoir at 400 K is:

Answers

Answer:

η = 0.5 = 50%

Explanation:

The efficiency of the power cycle is given by the following formula:

[tex]\eta = \frac{W}{Q_1}\\\\\eta = \frac{Q_1-Q_2}{Q_1}[/tex]

where,

where,

η = efficiency = ?

Q₁ = heat received from hot reservoir = 1000 KJ

Q₂ = heat discharged to cold reservoir = 500 KJ

Therefore,

[tex]\eta = \frac{1000\ KJ-500\ KJ}{1000\ KJ}[/tex]

η = 0.5 = 50%

The patellar tendon attaches to the tibia at a 20 deg angle 3 cm from the axis of rotation at the knee. If the force generated in the patellar tendon is 400 N, what is the resulting angular acceleration, in rad/s2), if the lower leg and foot have a combined mass of 4.2kg and a given radius of gyration of 25 cm

Answers

Answer:

the resulting angular acceleration is 15.65 rad/s²

Explanation:

Given the data in the question;

force generated in the patellar tendon F = 400 N

patellar tendon attaches to the tibia at a 20° angle 3 cm( 0.03 m ) from the axis of rotation at the knee.

so Torque produced by the knee will be;

T = F × d⊥

T = 400 N × 0.03 m × sin( 20° )

T = 400 N × 0.03 m × 0.342

T = 4.104 N.m

Now, we determine the moment of inertia of the knee

I = mk²

given that; the lower leg and foot have a combined mass of 4.2kg and a given radius of gyration of 25 cm ( 0.25 m )

we substitute

I = 4.2 kg × ( 0.25 m )²

I = 4.2 kg × 0.0626 m²

I = 0.2625 kg.m²

So from the relation of Moment of inertia, Torque and angular acceleration;

T = I∝

we make angular acceleration ∝, subject of the formula

∝ = T / I

we substitute

∝ = 4.104 / 0.2625

∝ = 15.65 rad/s²

Therefore, the resulting angular acceleration is 15.65 rad/s²

The acceleration vector of a particle in uniform circular motion:___________
a) points outward from the center of the circle.
b) points toward the center of the circle.
c) is zero.
d) points along the circular path of the particle and opposite the direction of motion.
e) points along the circular path of the particle and in the direction of motion.

Answers

(B)

Explanation:

Centripetal means "towards the center" so the acceleration vector of an object undergoing UCM is always pointed towards the center.

The acceleration vector of a particle in a uniform circular motion points toward the center of the circle, The correct option is option (b).

Centripetal force is the force acting on an object in curvilinear motion directed towards the axis of rotation or center of curvature. The unit of centripetal force is Newton.

Centripetal means "towards the center" so the acceleration vector of an object undergoing circular motion is always pointed towards the center.

Therefore, The acceleration vector of a particle in a uniform circular motion points toward the center of the circle, The correct option is option (b).

To know more about the Centripetal force:

https://brainly.com/question/31417673

#SPJ6

Place each description under the correct theory
Gravity is an attractive force.
Universal Law of Gravitation
General Theory of Relativity
Mass and distance affect force.
Time and space are absolute,
Time and space are relative.
Gravity is due to space-time curving.
Mass affects space-time curving.

Answers

Answer:

1) Law of Universal Gravitation     Gravity is an attractive force

5) General relativity               Gravity is due to the curvature of spacetime

Explanation:

In this exercise you are asked to relate the correct theory and its explanation

Theory Explanation

1) Law of Universal Gravitation              Gravity is an attractive force

2) Law of universal gravitation              Mass and distance affect force

3) Classical mechanics                           time and space are absolute

4) Special relativity                                 Time and space are relative

5) General relativity                                Gravity is due to the curvature of

                                                               spacetime

6) General relativity                                 Mass affects the curvature of space - time

Answer:

Explanation:

edge2022

Use the following information to answer the next question.
Environmental Concerns
1. release of greenhouse gases
2. release of gases that cause acid rain
3. release of excess heat
4. depletion of solar energy
5. depletion of geothermal energy
6. flooding of land
Which of the above environmental concerns are associated with the production of electricity?
Select one:
O A. 2, 3, and 4
O B. 1, 2, 3, and 6
O C. 1, 2, 3, 5 and 6
O D. 1, 3, and 5

Answers

Answer:

1.Emitted primarily through the burning of fossil fuels (oil, natural gas, and coal), solid waste, and trees and wood products. Changes in land use also play a role. Deforestation and soil degradation add carbon dioxide to the atmosphere, while forest regrowth takes it out of the atmosphere.

2.Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances can rise very high into the atmosphere, where they mix and react with water, oxygen, and other chemicals to form more acidic pollutants, known as acid rain.

3.Untreated, heat exhaustion can lead to heatstroke, a life-threatening condition that occurs when your core body temperature reaches 104 F (40 C) or higher. Heatstroke requires immediate medical attention to prevent permanent damage to your brain and other vital organs that can result in death.

4.The loss of solar energy in passing through the atmospheric layers is called the atmospheric deflection. ... The longer the path traversed, the greater the amount of radiant energy depleted. Various processes whereby heat energy is lost through the atmosphere are known as scattering, diffusion, absorption, and reflection.

5.Geothermal energy is renewable because the Earth has retained a huge amount of the heat energy that was generated during formation of the planet. In addition, heat is continuously produced by decay of radioactive elements within the Earth. The amount of heat within the Earth, and the amount that is lost though natural processes (e.g. volcanic activity, conduction/radiation to the atmosphere), are much, much more than the amount of heat lost through geothermal energy production. At any one geothermal field, however, the temperature of the geothermal reservoir or the fluid levels/fluid pressure in the reservoir may decrease over time as fluids are produced and energy is extracted. Produced fluids can be re-injected to maintain pressures, although this may further cool down the reservoir if care is not taken. Over time, it is commonly necessary to drill additional wells in order to maintain energy production as temperatures and/or reservoir fluid pressures decline.

6.Floods, Floodplains, and Flood-Prone Areas. ... Flooding is a result of heavy or continuous rainfall exceeding the absorptive capacity of soil and the flow capacity of rivers, streams, and coastal areas. This causes a watercourse to overflow its banks onto adjacent lands.

The environmental concerns associated with the production of electricity are the release of greenhouse gases, the release of gases that cause acid rain, the release of excess heat, the flooding of land, and the depletion of geothermal energy so, option C is correct.

What is electricity?

The presence or movement of charged particles is electricity. The movement of electrons through a circuit is known as an electric current. The accumulation of electrons on an insulator causes static electricity.

Mostly released when solid trash, trees, and wood products are burned, along with fossil fuels (coal, gas, and oil).

Land use changes also have an impact. Carbon dioxide is released into the atmosphere by deforestation and soil erosion, while it is removed from it by forest regeneration.

To know more about electricity:

https://brainly.com/question/29812640

#SPJ2

The mass is released from the top of the incline and slides down the incline. The maximum velocity (taken the instant before the mass reaches the bottom of the incline) is 1.06 m/s. What is the kinetic energy at that time

Answers

Answer:

0.28 J

Explanation:

Let the mass of the object is 0.5 kg

The maximum velocity of the object is 1.06 m/s.

We need to find the kinetic energy at that time. It is given by :

[tex]K=\dfrac{1}{2}mv^2\\\\=\dfrac{1}{2}\times 0.5\times (1.06)^2\\\\K=0.28\ J[/tex]

So, the required kinetic energy is equal to 0.28 J.

A cylindrical water tank has a height of 20cm and a radius of 14cm. If it is filled to 2/5 of its capacity, calculate.

I. Quantity of water in the tank

II. Quantity of water left to fill the tank to its capacity.

Answers

Answer:

4.926 L Y 7.389 L

Explanation:

first you calculate the tank volume

V = π[tex](14 cm)^{2}[/tex](10 cm = [tex]12315 cm^{3}[/tex]

then you convert to liters

[tex]12315 cm^{3}[/tex] = 12.315 l

then you calculate the liters of water

2/5(12.35 l) = 4.926 l

finally we calculate the amount without water

12.315 l - 4.926 l = 7.389 l

HERE IS MORE INFORMATION ON THE SUBJECT. THEY REMOVED THE

ENGLISH SITE BUT YOU CAN USE TRANSLATOR

LINK: https://gscourses.thinkific.com/courses/fisicai

A ten loop coil of area 0.23 m2 is in a 0.047 T uniform magnetic field oriented so that the maximum flux goes through the coil. The average emf induced in the coil is

Answers

Answer:

Explanation:

From the question we are told that:

Number of turns [tex]N=10[/tex]

Area [tex]a=0.23m^2[/tex]

Magnetic field [tex]B=0.947T[/tex]

Generally the equation for maximum flux is mathematically given by

 [tex]\phi=NBa[/tex]

 [tex]\phi=10*0.047*0.23[/tex]

 [tex]\phi=0.1081wbi[/tex]

Therefore induced emf

 [tex]e= \frac{d\phi}{dt}[/tex]

Since

 [tex]t=0[/tex]

Therefore

 [tex]e=0[/tex]

A car starting at rest accelerates at 3m/seconds square How far has the car travelled after 4s?​

Answers

Answer:

24 meters

Explanation:

Find the final velocity. 12m/s

d=[final-initial]/2×time

D=(6m/s)×4=24 m/s

The human eye can readily detect wavelengths from about 400 nm to 700 nm. Part A If white light illuminates a diffraction grating having 910 lines/mm , over what range of angles does the visible m

Answers

Answer:

The correct answer is "[tex]21.344^{\circ}[/tex]" and "[tex]39.56^{\circ}[/tex]".

Explanation:

According to the question,

Slit width,

[tex]d=\frac{1}{910 \ lines/mm}[/tex]

  [tex]=\frac{1}{910\times 10^3}[/tex]

  [tex]=1.099\times 10^{-6} \ m[/tex]

The condition far first order maxima will be:

⇒ [tex]d Sin \theta = 1 \lambda[/tex]

Now,

⇒ [tex]\Theta_{min} = Sin^{-1} (\frac{\lambda}{d} )[/tex]

             [tex]=Sin^{-1} (\frac{400\times 10^{-9}}{1.099\times 10^{-6}} )[/tex]

             [tex]=21.344^{\circ}[/tex]

⇒ [tex]\Theta_{max} = Sin^{-1} (\frac{\lambda}{d} )[/tex]

             [tex]=Sin^{-1} (\frac{700\times 10^{-9}}{1.099\times 10^{-6}} )[/tex]

             [tex]=39.56^{\circ}[/tex]

A spinning wheel having a mass of 20 kg and a diameter of 0.5 m is positioned to rotate about its vertical axis with a constant angular acceleration, a of 6 rad/s If the initial angular velocity is 1.5 rad/s, determine The maximum angular velocity and linear velocity of the wheel after 1 complete revolution.

Answers

Answer:

ωf = 8.8 rad/s

v = 2.2 m/s

Explanation:

We will use the third equation of motion to find the maximum angular velocity of the wheel:

[tex]2\alpha \theta = \omega_f^2 -\omega_I^2[/tex]

where,

α = angular acceleration = 6 rad/s²

θ = angular displacemnt = 1 rev = 2π rad

ωf = max. final angular velocity = ?

ωi = initial angular velocity = 1.5 rad/s

Therefore,

[tex]2(6\ rad/s^2)(2\pi\ rad)=\omega_f^2-(1.5\ rad/s)^2\\\omega_f^2=75.4\ rad/s^2+2.25\ rad/s^2\\\omega_f = \sqrt{77.65\ rad/s^2}[/tex]

ωf = 8.8 rad/s

Now, for linear velocity:

v = rω = (0.25 m)(8.8 rad/s)

v = 2.2 m/s

friction between two flat surfaces can be divided into two categories. what are the two most common kinds of friction?

Answers

Answer:

kinetic and static

Explanation:

hope it helps! ^w^

An object moves in a direction parallel to its length with a velocity that approaches the velocity of light. The length of this object, as measured by a stationary observer:________

a. approaches infinity.
b. approaches zero.
c. increases slightly.
d. does not change.

Answers

Answer:

b. approaches zero.

Explanation:

The phenomenon is known as length contraction.

Length contraction is a result of Einstein's special theory of relativity. This theory states that an observer in an inertial frame of reference will observe a decrease in the length of any moving object placed at another inertial frame of reference.

let the length of the train = L

Let the length observed when the train is in motion = L₀

Apply Einstein's special theory of relativity;

[tex]L_0 = L \times \sqrt{1 - \frac{v^2}{c^2} } \\\\where;\\\\v \ is \ the \ velocity \ of \ the \ train\\\\c \ is \ the \ speed \ of \ light\\\\[/tex]

from the equation above, when v = 0, the length observed is equal to the initial length of the train. (L₀ = L)

As the velocity of the train (v) approaches the speed of light (c), the length of the train observed (L₀) becomes smaller than the initial length of the train (L).  (L₀ < L)

Eventually, when v equals c, we will have a square root of zero (0), and the length observed will become zero.  (L₀ = 0)

Thus, the length of this object, as measured by a stationary observer approaches zero

the product 17.10 ✕

Answers

Explanation:

pls write the full question

A barge is hauled along a straight-line section of canal by two horses harnessed to tow ropes and walking along the tow paths on
either side of the canal. Each horse pulls with a force of 839 N at an angle of 15° with the centerline of the canal. Find the sum of these
two forces on the barge.
answer in ___kN

Answers

Answer:

1.621 kN

Explanation:

Since each horse pulls with a force of 839 N at an angle of 15° with the centerline of the canal, the horizontal component of the force due to the first horse along the canal is F= 839cos15° N and its vertical component is F' = 839sin15° N(it is positive since it is perpendicular to the centerline of the canal and points upwards).

The horizontal component of the force due to the second horse along the canal is f = 839cos15° N and its vertical component is f' = -839sin15° N (it is negative since it is perpendicular to the centerline of the canal and points downwards).

So, the resultant horizontal component of force R = F + f = 839cos15° N + 839cos15° N = 2(839cos15°) N = 2(839 × 0.9659) = 2 × 810.412 = 1620.82 N

So, the resultant vertical component of force R' = F' + f' = 839sin15° N + (-839sin15° N) = 839sin15° N - 839sin15° N = 0 N

The magnitude of the resultant force which is the sum of the two forces is R" = √(R² + R'²)

= √(R² + 0²)  (since R' = 0)

= √R²

= R  

= 1620.82 N

= 1.62082 kN

≅ 1.621 kN

So, the sum of these  two forces on the barge is 1.621 kN

Question 1 of 10
Which nucleus completes the following equation?
239UHe+?
A. 228 Th
B. 2220
c. 23. Pu
D. 78Th
SUBMIT

Answers

Answer:

Option D. ²²²₉₀Th

Explanation:

Let the unknown be ⁿₘZ. Thus, the equation becomes:

²²⁶₉₂U —> ⁴₂He + ⁿₘZ

Next, we shall determine n, m and Z. This can be obtained as follow:

For n:

226 = 4 + n

Collect like terms

226 – 4 = n

222 = n

n = 222

For m:

92 = 2 + m

Collect like terms

92 – 2 = m

90 = m

m = 90

For Z:

ⁿₘZ => ²²²₉₀Z => ²²²₉₀Th

Therefore, the complete equation becomes:

²²⁶₉₂U —> ⁴₂He + ⁿₘZ

²²⁶₉₂U —> ⁴₂He + ²²²₉₀Th

Thus, the unknown is ²²²₉₀Th

Do all substances conduct heat ?Why/ Why not ?​

Answers

Answer:

no, all substances doesnot conduct heat

Answer:

No, all substances do not conduct heat easily because it depends on the nature of the substance. Some are good conductors of heat and some are bad. Therefore, it depends on their characteristics and their ability to conduct heat.

The bad conductors of heat are water, air, plastic, wood, etc.

Gold, Silver, Copper, Aluminium, Iron, etc. are good heat conductors as well as electrical conductors.

A 3.00-kg ball swings rapidly in a complete vertical circle of radius 2.00 m by a light string that is fixed at one end. The ball moves so fast that the string is always taut and perpendicular to the velocity of the ball. As the ball swings from its lowest point to its highest point Group of answer choices the work done on it by gravity is -118 J and the work done on it by the tension in the string is zero. the work done on it by gravity is -118 J and the work done on it by the tension in the string is 118 J. the work done on it by gravity and the work done on it by the tension in the string are both equal to -118 J. the work done on it by gravity is 118 J and the work done on it by the tension in the string is -118 J. the work done on it by gravity and the work done on it by the tension in the string are both equal to zero.

Answers

Answer:

The ball moves from lowest to highest point:

W = M g h = 3 * 9.8 * 4 = 118 J

This is work done "against" gravity so work done by gravity is -118 J

The tension of the string does no work because the tension does not

move thru any distance   W = T * x = 0 because the length of the string is fixed.

Other Questions
If I am riding a motorcycle in a state that has a helmet law, however, I am riding on a road that is owned and maintained by the Federal Government, such as a road in a Federal park that is governed by the Department of Interior. Am I required to wear a helmet? On an electricity bill of $40.80, Mrs.Miller pays only $38.76 because she paysbefore a certain date. What percentdiscount is Mrs. Miller allowed? P Company owns 90% of the outstanding common stock of S Company. On January 1, 2015, S Company sold land to P Company for $578,000. S Company originally purchased the land for $427,400. On January 1, 2016, P Company sold the land purchased from S Company to a company outside the affiliated group for $676,100. Calculate the amount of gain on the sale of the land that is recognized on the books of P Company in 2016. Why was Carnegie Steel considered a vertical monopoly?The company controlled every step of steel production, from raw materials to distribution.The company controlled all the steel plants in the country.The company became the only source of steel after competitors went out of business.The company was able to produce more steel than any other steel company in the world. Plz help me find x and show work what are the angles a and b in the actual molecule of which this is a lewis structure note for advanced students give the ideal angles and don t worry about small differences from the ideal that might be caused by the fact that different electron groups may have slightly different sizes The null hypothesis and the alternate hypothesis are: H0: The frequencies are equal. H1: The frequencies are not equal. Category f0 A 10 B 30 C 30 D 10 State the decision rule, using the 0.05 significance level. (Round your answer to 3 decimal places.) Compute the value of chi-square. (Round your answer to 2 decimal place.) What is your decision regarding H0 Which numbers are integers? Check all that apply.04-15-102.50-40.13ILL GIVE BRAINLIEST "smart as a whip" is an example of what type of figurative language? I need help solving this problem Match each lab incident to the item of PPE that will protect you from it. Each item of PPE will only be used once. While picking up a buret, an unknown solution left by a previous solution drips onto your hand._______________While pulling an empty beaker off the shelf at the beginning of lab, it slips out of your hand onto the floor _______ While checking on a stirring solution, the solution splashes up towards your face. _______While transferring a solution from a flask to a beaker, the solution accidentally spills down the front of the lab bench, __________ A. Gloves B. Lab coat C. Goggles D. Closed-toe shoes Azure, a C corporation, reports the following: Pretax book income is $543,000. Depreciation on the tax return is $20,000 greater than depreciation on the financial statements. Rent income reportable on the tax return is $36,000 greater than rent income per the financial statements. Fines for pollution appear as a $10,000 expense in the financial statements. Interest earned on municipal bonds is $25,000. What is Azure's taxable income When dragons on planet Pern lay eggs, the eggs are either green or yellow. The biologists have observed over the years that 21% of the eggs are yellow, and the rest green. Next spring the lead scientist has permission to randomly select 58 of the dragon eggs to incubate. Consider all the possible samples of 58 dragon eggs.What is the usual number of yellow eggs in samples of 58 eggs? (Give answers as SENSIBLE whole numbers.)minimum usual number of yellow eggs =maximum usual number of yellow eggs purchased heavy equipment by giving the seller a $30,000 cash down payment and a 5-year interest-bearing note for the $170,000 balance of the price. Compute Pettit's book basis and tax basis in the equipment A is 2 times older than B. Identify the appropriate expression. Which details directly characterize Dr. Lanyon? Check all that apply. The solemn butler knew and welcomed him . . . . . . he was subjected to no stage of delay, but ushered direct from the door to the dining-room . . . This was a hearty, healthy, dapper, red-faced gentleman . . . . . . he sprang up from his chair and welcomed him with both hands. The geniality, as was the way of the man, was somewhat theatrical to the eye . . . Suppose an annuity pays 6% annual interest, compounded semi-annually. You invest in this annuity by contributing $4,500 semiannually for 6 years. What will the annuity be worth after 6 years? Por que los derechos son una construccion 2. Nitric oxide contains 46.66% nitrogen and 53.34% oxygen. Water contains 11.21% hydrogen and 88.79% oxygen. Ammonia contains 17.78% hydroger and 82.22% nitrogen. Use these data to verify the law of reciprocal proportions. Michael invest $P at a rate of 3.8% per year compounded interest. After 30 years the value of this investment is $1,469. Calculate the value of P.