There are eight small islands in a lake, and the state wants to build seven bridges to connect them so that each island can be reached from any other one via one or more bridges. The cost of constructing a bridge is proportional to its length. The distances between pairs of islands are given in the following table:
Answers
The bridges that would have to maximize the total construction cost would be: 115, 120, 155, 160, 170, 175, 180
How to solve for the clustersWe would have to solve for the clusters by making use of what is called the Kruskal algorithm.
The way that this is solved is by the merging of clusters such that we would have to count where the number that is at the starting point ends on the diagram in the number at the end point.
For instance in 3 to 5, if we count under 5, 3 times we would have the value 115
Similarly if we do the same from 1 to 8 we would have 120, 2 to 8, is 155. 4 to 5 is 150. 5 to 8 is 170, 6 to 7 is 175 and 2 to 6 is 180
Read more on Kruskal's algorithm here: https://brainly.com/question/29023706
#SPJ1
complete question
Find which bridges to build so that the total construction cost is minimized
Related Questions
Ball B, of mass mb, is suspended from a cord of length l attached to a cart A, of mass ma, which can roll freely on a frictionless horizontal tract. Assuming that cart A is given an initial horizontal velocity v0 while ball B is at rest, determine:
a) The velocity of B as it reaches its maximum elevation
b) the maximum vertical distance h through which B will rise. ( It is assumed that2gl )
Answers
a) vB = {mB / (mA+mB)} v°
b) h = mA×v°²/mA+mB ×2g
What are the concepts applied in the question?a) It implies from the impulse-momentum principle that the horizontal part of momentum is conserved in the absence of external horizontal forces. The velocity of B at its highest height can be used to solve this relation.
b) The initial kinetic energy and maximal potential energy may be related using the conservation of energy concept. This connection yields the greatest vertical distance.
How are momentum and impulse related?Any moving body can have momentum since momentum is defined as mass in motion. The impulse of an item is equal to its change in momentum. Impulse is defined as a force multiplied by a time period. Instead of being the same as momentum, impulse is the change in momentum of an object.
To know more about Impulse- momentum visit
brainly.com/question/904448
#SPJ4
A cart A with mass ma that can freely roll on a frictionless horizontal tract is coupled to a ball B with mass mb that is strung from a rope of length l. h = mAv°2/mA+mB 2g, where vB = mB / (mA+mB) v°
What concepts are being used in the question?a) The impulse-momentum principle suggests that, in the absence of external horizontal forces, the horizontal component of momentum is conserved. This relationship can be solved using the velocity of B at its maximum height.
b) The conservation of energy principle can be used to relate the initial kinetic energy and maximum potential energy. The longest vertical distance is produced by this connection.
How are impulse and momentum related?Since momentum is characterized as mass in motion, it can exist in any moving body. An object's change in momentum is equal to its impulse. The definition of an impulse is a force times a time interval. Impulse is the change in momentum of an object as opposed to momentum itself.
To know more about Impulse-momentum visit:
brainly.com/question/904448
#SPJ4
Consider the LEGV8 code below. Assume that X1 is initialized to 11 and X2 is initialized to 22. ADDI X1, X2, #5 ADD X3, X1, X2 ADDI X4, X1, #15 ADD X5, X1, X1 (a) Suppose you executed the code on a version of the pipeline from Section 4.5 that does not handle data hazards (i.e., the programmer is responsible for addressing data hazards by inserting NOP instructions where necessary). Show the pipeline timing diagram below when the code is executed. ADDI X1, X2, #5 IF ID EX МЕМ WB ADD X3, X1, X2 ADDI X4, X1, #15 ADD X5, X1, X1 (b) What would the final values of registers X3 and X4 be? (c) What would the final values of register X5 be? Assume the register file is written at the beginning of the cycle and read at the end of a cycle. Therefore, an ID stage will return the results of a WB state occurring during the same cycle. See Section 4.7 and Figure 4.51 for details. (d) Suppose you executed the code below on a pipeline from Section 4.5 that uses data forwarding for handling data hazards. Show the pipeline timing diagram below: ADDI X1, X2, #5 IF ID EX МЕМ WB ADD X3, X1, X2 ADDI X4, X1, #15 ADD X5, X3, X2
Answers
Except for instructions and the stack, LEGv8 does not require words to be aligned in memory.
What are the eventual values of register X5?LEGv8 Registers n X0 - X7:
procedure arguments/results n X8:
n X9 - X15: indirect result location register
temporaries n X16 - X17 (IP0 - IP1):
may be used as a scratch register by the linker, other times as a temporary register n X18:
n X19 - Platform register for platform independent code; otherwise, a temporary register
n C code: f = (g + h) - I + j);
n f,..., j in X19, X20,..., X23 n
Compiled LEGv8 code:
f = (g + h) - I + j);
ADD X9, X20, X21
ADD X10, X22, X23
SUB X19, X9, X10
To learn more about LEGv8 refer
https://brainly.com/question/28851857
#SPJ4
In surveying a construction alignment, why should the I angle be measured using both faces of the instrument? A highway curve (are definition) to the right, having R = 550 m and I = 18 degree 30', will be laid out by coordinates with a total station instrument setup at the PI. The PI station is 3 + 855.2CX) m, and its coordinates are X = 65, 304.654 m and Y = 36,007.434 m. The azimuth (from north) of the back tangent proceeding toward the PI is 48 degree 17'12". To orient the total station, a back sight will be made on a POT on the back tangent. Compute lengths and azimuths necessary to stake the curve at 30-m stations. In Problem 24.27, compute the XY coordinates at 30-m stations. An exercise track must consist of two semicircles and two tangents, and be exactly 1000 m along its centerline. The two tangents are 100.000 m each. Calculate the radius for the curves. What sight distance is available if there is an obstruction on a radial line through the PI inside the curves in Problems 24.30 and 24.31? For Problem 24.7, obstacle 15 ft from curve. For Problem 24.12, obstacle 10 m from curve. If the disclosure for the curve of Problem 24.7, computed as described in Section 24.8, is 0.12 ft, what is the field layout precision? Assume that a 100-ft entry spiral will be used with the curve of Problem 24.7 Compute and tabulate curve notes to stake out the alignment from the TS to ST at full stations using a total station and the deflection-angle, total chord method. Same as Problem 24.33, except use a 200-ft spiral for the curve of Problem 24.8. Same as Problem 24.33, except for the curve of Problem 24.9, with a 50-m entry spiral using stationing of 30 m and a total station instrument. Compute the area bounded by the two arcs and tangent in Problem 24.24. In an as-built survey, the XY coordinates in meters of three points on the centerline of a highway curve are determined to be A: (3770.52, 4913.84); B: (3580.80, 4876.37); C: (3399.27, 4809.35). What are the radius, and coordinates for the center of the curve in meters? In Problem 24.37, if the (x, y) coordinates in meters of two points on the centerline of the tangents are (3042.28, 4616.77) and (4435.66, 4911.19), what are the coordinates of the PC, PT, and the curve parameters L, T, and/?
Answers
The radius for the curves are 127.32 m.
What is radius?A circle's or a sphere's radius is described as the line segment connecting its centre to its edge. From any location on the circle or sphere's circumference, the radius' length is constant. Its length and diameter are inversely proportional.
The letter "r" is typically used to refer to this crucial component of spheres and circles. When discussing multiple radiuses at once, the word "radii," the plural form of radius, is used. In a circle or sphere, the diameter is the longest line segment connecting any points on the outside of the centre; the radius is equal to half of the diameter's length.
Learn more about radius
https://brainly.com/question/24375372
#SPJ4
sentinel 14 gun fire safe, electronic lock, steel, long guns and rifles making a ticking noise when battery was changed
Answers
When the battery was changed, the sentinel 14 gun fire safe's electronic lock, steel, long guns, and rifles began to tick.
Electric(al) devices are tools that functionally rely on electricity to power their fundamental parts. They can be considered as being superior to traditional mechanical systems, which depend on diverse power sources like fuels or human physical strength. A certain type of electrical equipment called an electronic device is used more often to process data than to generate mechanical forces. To more clearly distinguish between the two types, electric gadgets that emphasize physical work are also known as electromechanical devices. Mechatronics demonstrates how the two sciences overlap.The study of electronic and electric devices, as well as their design, maintenance, and power supply, is known as electrical engineering.
Learn more about electrical from
brainly.com/question/776932
#SPJ4
a. what are the fundamental problems of the dns protocol that makes the dns vulnerable to dns cache poisoning attack? [4 mark]
Answers
The biggest problem is that there is no method to validate DNS replies, which makes it simpler for hackers to utilize cache poisoning.
Exactly why is DNS susceptible to cache poisoning?DNS cache poisoning is the process by which a threat actor feeds bogus data into the DNS cache, causing the user's web browser to respond incorrectly. Users are typically redirected to a different website than the one they had originally meant to visit by this response.
What is a DNS vulnerability, and how is that vulnerability combated?Using a huge number of requests for erroneous or nonexistent records, a DNS NXDOMAIN flood DDoS attack seeks to overwhelm the DNS server. A DNS proxy server, which consumes the most resources, frequently handles these attacks.
To know more about cache poisoning visit :-
https://brainly.com/question/17113669
#SPJ4
Given string userString on one line, character updatedchar on a second line, and integer strindex on a third line, change the character at index strindex of userString to updatedChar. Ex: If the input is: gecko y then the output is: gecky Note. Assume the length of string userstring is greater than strindex.
Answers
Change the character at userString's index strindex to updatedChar given the strings userString on one line, updatedChar on another, and integer strindex on a third. Example: If the input is a gecko and y, the result will be a gecko. true
A UserString container, which is akin to a String in the Python collections module. These string items are kept in this class as containers. This class is useful when one wants to create their own string with unique or extra features. Strings are collections of characteristics ordered in a particular order. This suggests that the characters that make up the string are believed to be in a specified left-to-right order. The four collection data types that are available in the Python programming language are list, tuple, sets, and dictionary. The function's name is flexible in Python. The current function can be renamed to just be a function aliasing.
Learn more about strings from
brainly.com/question/20813205
#SPJ4
Consider the following method. public static void addOneToEverything(int[] numbers) { for (int j = 0; j < numbers.length; j++) { numbers[j]++; } } Which of the following code segments, if any, can be used to replace the body of the method so that numbers will contain the same values? I. for (int num : numbers) { num++; } II. for (int num : numbers) { num[j]++; } III. for (int num : numbers) { numbers[num]++; } A I only B I and III only C II and III only D I, II, and III E None of the code segments will return an equivalent result. E None of the code segments will return an equivalent result
Answers
The code segments, if any, can be used to replace the body of the method so that numbers will contain the same values is E None of the code segments will return an equivalent result
What is an array?Using an entire set of values at once is possible with array programming, a technique used in computer science. These answers are frequently applied in scientific and engineering contexts. A data structure called an array consists of a set of elements (values or variables), each of which is identified by an array index or key.
Depending on the language, other data types that describe aggregates of values, like lists and strings, may overlap (or be identified with) array types. An array is a grouping of identically-typed elements that are stored in consecutive memory locations and can each be individually referred to using an index to a special identifier.
Based on the information, it should be noted that none of the code will return the same result as all the codes does not assign correct values to array.
Therefore, based on the information, the correct option is E.
Learn more about array on:
https://brainly.com/question/19634243
#SPJ1
The ______ algorithm, developed in 1977, was the first public key encryption algorithm published for commercial use. SSL Record Protocol.
Answers
The correct answer is RSA, The RSA algorithm, developed in 1977, was the first public key encryption algorithm published for commercial use. SSL Record Protocol.
RSA vs AES, which is superior?
A more precise and beautiful encryption technique is the cipher text approach using the Advance Encryption Standard (AES). The AES algorithm surpasses the Data Encryption Standard (DES) and RSA algorithms, according on test result and the text files utilized.
What purposes serve RSA?A popular form of public-key cryptography used for data encryption of email and other mobile payments via the Internet is RSA encryption, or Rivest-Shamir-Adleman encryption. Ronald L. Rivest, Adi Shamir, and Leonard M. Rivest are the names of RSA's creators.
To know more about algorithm visit
brainly.com/question/17780739
#SPJ4
If the opcodes field for an instruction has n bits, that means there are _______________ potential distinct operations.
A. 2n
B. 2n - 1
C. n2
D. 2n
E. n/2
Answers
The correct answer for this problem is A. 2n .
What are opcodes?
Opcodes are machine-level instructions that are used by processors to execute specific operations.
The number of bits in the opcodes field determines the number of potential distinct operations that can be encoded. If the opcodes field has n bits, there are 2^n potential distinct operations that can be encoded.
This is because each bit in the field can be either 0 or 1, and there are 2^n possible combinations of 0s and 1s that can be represented with n bits.
For example, if the opcodes field has 4 bits, there are 2^4 = 16 potential distinct operations that can be encoded.
To Know More About machine-level instructions, Check Out
https://brainly.com/question/15584335
#SPJ4
what is software enginnering?
Answers
Software engineering is the process of designing, building, and maintaining software programs to solve problems and improve life.
What is the value of Software Engineering?Software engineering is the process of designing, building, and maintaining software programs. Software engineers use their skills and knowledge to create software that is reliable, efficient, and easy to use.
Note that they work with computers and programming languages to create software that can be used for many different purposes, such as helping people communicate, run businesses, or entertain themselves. Software engineering is an important job because it helps us solve problems and make life easier.
Learn more about Software Engineering:
https://brainly.com/question/10339061
#SPJ1
Cryptography Consider the case where plaintext messages are only composed of upper case letters of the English alphabet and spaces. Therefore there are 27 different symbols to represent (26 letters and the space). Consider an encoding where the space is 0, A is 1, B is 2, ..., Z is 26. Using a shift cipher with key k = 4 a plain text message was encrypted, and the following ciphertext was obtained: HMWGVIXIDQEXL What was the original plaintext message? Explain how you obtain the result. Simply giving the correct answer will not give any credit.
Answers
Below is the answer to the given problem in step-wise manner by using Cryptography, Value Table, Cipher Text Table.
Step-by-step Explanation:
VALUE TABLE
A B C D E F G H I J K L M N O
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
P Q R S T U V W X Y Z
16 17 18 19 20 21 22 23 24 25 26
CIPHER TEXT TABLE
H M W G V I X I D Q E X L
8 13 23 7 22 9 24 9 4 17 5 24 12
AFTER SUBTRACTING KEY FROM THE VALUES:
4 9 19 3 18 5 20 5 0 13 1 20 8
D I S C R E T E M A T H
SO THE DECRYPTED MESSAGE IS - DISCRETE MATH
To know more about Cryptography, visit: https://brainly.com/question/29044547
#SPJ4
Which of the following steps does core and shell development include according to the LEED project category of that name? (Select all that apply.)
HVAC and wiring installation
completed common areas
installation of audio/video equipment
installation of tenant-specific facilities
Answers
Answer:
HVAC and wiring installation
Completed common areas
Explanation:
Core and shell development includes the installation of HVAC and wiring, as well as the completion of common areas. It does not typically include the installation of audio/video equipment or tenant-specific facilities, which are typically part of the tenant improvement process.
if member bd is an a992 steel rod of radius 2.4 in ., determine the maximum load p that can be supported by the truss without causing the member to buckle.
Answers
The declaration claims that the truss can support 77.689 Kips without enabling the member to collapse.
What purposes do truss serve?Trusses are typically utilized in bridges, towers, cranes, walkways, and roof structures for big span buildings. They can support heavier loads and utilise cross-sections more effectively.
Briefing:∑MG = 0
(48)*Ay - 32*P-16*P=0
Ay = P
Considers joint A
∑fy = 0
Ay - [tex]F_{AB}[/tex] Sin∅ = 0
Ay - [tex]F_{AB}[/tex] Sin (36.87°) = 0
P - [tex]F_{AB}[/tex] Sin (36.87°) = 0
[tex]F_{AB}[/tex] = P-/0-6
Given:
r = 2.4 in⁴
and moment of inertia;
I = r/64*d⁴
= r/64(2*2.4)⁴
I = 26.05 inch
From Euler's formula:
[tex]P_{cr}[/tex] = r²EI/(k2)²
[tex]F_{AB}[/tex] = r²EI/(k[tex]L_{AB}[/tex])²
[tex]$\frac{P}{0.6}=\frac{r^2 \cdot\left(29 \times 10^3 \mathrm{kes} 1\right) \times\left(26.0576^{\circ} \mathrm{in}^4\right)}{(1 \times 20 \times 12)^2}$[/tex]
P = (129.482)*0.6
P = 77.689 Kips
To know more about Truss visit:
https://brainly.com/question/29758104
#SPJ4
an example of architecture with similar features to the persian fire temple pavilion featured in lecture was this early islamic tomb. tomb of ahmed
Answers
Tomb of ahmed is an example of architecture with similar features to the persian fire temple pavilion featured in lecture was this early islamic tomb.
Some information about Ahmad's Tomb:
Ahmad Shah's tomb, also known as Raja no Hajiro and Badshah no Hajiro (King's Mausoleum), is a collection of tombs built during the Medieval period in Ahmedabad. He is widely regarded as the founder of Ahmedabad, Gujarat. The exquisite artwork and architectural extravagance set the tomb apart from other tourist attractions and establishes it as a gold standard in Indian architecture.
Expectations when visiting Ahmad Shah's Tomb:
1. Ahmad Shah's tomb is one of Ahmedabad's most important tourist attractions.
2. The tomb is square in shape and has stone windows with lattice work. Women, on the other hand, are still not permitted in the central chamber of Ahmad Shah's Tomb.
3. Across the street is the Rani no Hajira, which houses the tombs of Ahmad Shah's queens. The tomb is in excellent condition, but the tombs of the queens have deteriorated.
4. Ahmad Shah's tomb is one of Ahmedabad's architectural wonders.
5. The artistic craftsmanship, latticed windows, and domes and minarets give the Tombs of Ahmad Shah an exquisite appearance. This tomb in Ahmedabad is a must-see for anyone interested in Mughal art and culture.
To know more about lattice work, visit: https://brainly.com/question/20038994
#SPJ4
this area has low water-flow velocities because flowing water forms a reservoir that can be used for hydroelectric power generation or recreation.
Answers
This area has low water-flow velocities because flowing water forms a reservoir that can be used for hydroelectric power generation or recreation : D (dam).
How does a hydroelectric generator work?A dam or other construction that alters the natural flow of a river or other body of water is used to create hydropower, often known as hydroelectric power.Impoundment, diversion, and pumped storage facilities are the three different types of hydroelectric facilities.A typical dam stores water behind it in a reservoir or lake that was created by humans. When water is let out of the dam, it rotates a turbine that is connected to an electricity-generating generator. On the river's downstream bank, the water flows back into the dam.Hydropower, often known as hydro energy, is a type of renewable energy that uses water from rivers and dams to power hydropower facilities.Learn more about hydroelectric generator refer to :
https://brainly.com/question/8934285
#SPJ4
Construct a Turing machine that generates all strings in reverse lexicographic order between the two provided strings X and Y. An input will be of the form "X,Y", where X is an element of {0, 1, 2}+ and Y is an element of {0, 1, 2}*. Your Turing machine must be a single tape, one way infinite, deterministic Turing machine. For this program you can use the left, right, and stay directives. When the Turing machine completes, the tape should contain a comma delimited list of all strings over {0, 1, 2}* in reverse lexicographic order starting with X and ending with Y. When your program completes it should accept the input and position the r/w head at the leftmost symbol of X.
Answers
The complete program regarding the quetions below
State q0:
Read 0: Move right and go to q0.
Read 1: Move right and go to q1.
Read 2: Move right and go to q2.
State q1:
Read 0: Move right and go to q1.
Read 1: Move right and go to q2.
Read 2: Move right and go to q3.
State q2:
Read 0: Move right and go to q2.
Read 1: Move right and go to q3.
Read 2: Move right and go to q4.
State q3:
Read 0: Move right and go to q3.
Read 1: Move right and go to q4.
Read 2: Move right and go to q5.
State q4:
Read 0: Move right and go to q4.
Read 1: Move right and go to q5.
Read 2: Move right and go to q6.
State q5:
Read 0: Move right and go to q5.
Read 1: Move right and go to q6.
Read 2: Move right and go to q7.
State q6:
Read 0: Move right and go to q6.
Read 1: Move right and go to q7.
Read 2: Move right and go to q8.
State q7:
Read 0: Move right and go to q7.
Read 1: Move right and go to q8.
Read 2: Move left and go to q7.
State q8:
Read 0: Move left and go to q8.
Read 1: Move left and go to q7.
Read 2: Move left and go to q6.
State q9:
Read 0: Move left and go to q9.
Read 1: Move left and go to q8.
Read 2: Move left and go to q5.
State q10:
Read 0: Move left and go to q10.
Read 1: Move left and go to q9.
Read 2: Move left and go to q4.
State q11:
Read 0: Move left and go to q11.
Read 1: Move left and go to q10.
Read 2: Move left and go to q3.
State q12:
Read 0: Move left and go to q12.
Read 1: Move left and go to q11.
Read 2: Move left and go to q2.
State q13:
Read 0: Move left and go to q13.
Read 1: Move left and go to q12.
Read 2: Move left and go to q1.
State q14:
Read 0: Move left and go to q14.
Read 1: Move left and go to q13.
Read 2: Move left and go to q0.
State q15:
Read 0: Move left and go to q15.
Read 1: Move left and go to q14.
Read 2: Stay in q15.
State q16:
Read 0: Print 0 and move left until the end of the string Y.
Read 1: Print 1 and move left until the end of the string Y.
Read 2: Print 2 and move left until the end of the string Y.
State q17:
Read 0: Print 0 and move left and go to q16.
Read 1: Print 1 and move left and go to q16.
Read 2: Print 2 and move left and go to q16.
What is program?
Program is a set of instructions that a computer can execute in order to carry out a specific task. Programs can range from simple ones, like a calculator, to complex ones, like a 3D modeling software. Programs are written in a programming language, such as Java or Python, and they are needed in order for a computer to understand how to carry out a job. Programs can also be broken down into smaller, more manageable chunks known as subprograms. Each subprogram is written with specific instructions that the computer can understand and execute
To learn more about program
https://brainly.com/question/27359435
#SPJ4
In the georelational model, the data scale of the values used to associate features with records in a relational database is a. nominal b. interval c. ordinal d. ratio e. character
Answers
In the georelational model, the data scale of the values used to associate features with records in a relational database is "character" (Option E)
What is a Georelational Model?In the georelational model, the data scale of the values used to associate features with records in a relational database is character. The georelational model is a way of storing geographic data in a relational database, in which features (such as points, lines, and polygons) are associated with records in the database through character values. These character values may be alphanumeric codes or names that represent the features.
A georelational data model is a geographic data model that depicts geographic characteristics as a combination of spatial and attribute data that is interconnected. The basic data model utilized in coverages is the georelational model.
It varies from the georelational data model in two key ways. In a single system, the object-based data model holds both spatial and attribute data for spatial characteristics. The object-based data model associates a spatial characteristic (object) with a set of attributes and operations.
Learn more about the relational database:
https://brainly.com/question/13262352
#SPJ1
Warm working of metals refers to which one of the following temperature regions relative to the melting point of the given metal on an absolute temperature scale: (a) room temperature, (b) 0.2Tm, (c) 0.4Tm, or (d) 0.6Tm?
Answers
Hot working refers to the metal forming process when it is carried out above the recrystallization temperature. Typically, it is between 0.6Tm times the melting point of base metal.
When newly treated, polished, or broken, a material takes on a bright look and conducts electricity and heat reasonably well. Metals are typically ductile and malleable. These traits are the result of the metallic bond that connects the atoms or molecules of the metal. A metal can be a molecular compound like polymeric sulphur nitride, an alloy like stainless steel, a chemical element like iron, or any combination of these. In physics, any substance that can conduct electricity at absolute zero degrees is commonly referred to be a metal. Numerous compounds that are not normally thought of as metals can become metallic when subjected to extremely high pressures. For instance, the nonmetal iodine progressively changes into a metal when subjected to pressures between 40 and 170 thousand.
Learn more about metal from
brainly.com/question/4701542
#SPJ4
a k-clique with spikes consists of 2k vertices such that the rst k elements form a clique and the rest k vertices are connected via an edge a dierent vertex of the clique.
Answers
In social network analysis, a k-clique, or quasi-complete sub-graph, is a relaxed clique. A k-clique in a graph is a subgraph where any two vertices are separated by less than k.
A relaxed clique is a k-clique, also known as a quasi-complete sub-graph, in social network research. Any subgraph in a graph where any two vertices are separated by fewer than k is known as a k-clique. A graph with a few vertices can be observed quickly. Because a clique of size k in a graph G has k vertices, each vertex's degree in that clique is k-1. When a portion of a graph's k vertices are linked to one another, the graph is said to have a k-clique. A clique is a subgraph of a graph with connected vertices. The k-clique problem seeks to locate the greatest complete subgraph.
To learn more about A clique refer
brainly.com/question/1474689
#SPJ4
what type of building has several floors with large areas of unobstructed space, originally rented out for light industrial purposes and now frequently converted to residential occupancy?
Answers
A soft story building is a multi-story building in which one or more floors have windows, wide doors, large unobstructed commercial spaces.
what is meant by multi-story building?
It's crucial for an engineer who is just beginning to design multi-story buildings to go logically through each stage of the design process.Below are six steps that make up this sequence.Each stage includes general guidelines to assist the designer in rapidly and effectively coming up with a workable solution for a specific set of limitations.In order for the end result to be both logical and attractive, the designer must also understand some general principles of excellent design.Aspects of engineering design are present during several of these stages. fabrication and constructing of a multi-story structure with a steel frame.To learn more about multi-story building refer to
https://brainly.com/question/24792206
#SPJ4
A loss-less transmission line of characteristic impedance of 50 Ohm is to be terminated with a
real 150-Ohm load. Between the load and the transmission line, a quarter-wave impedance
transformer will be introduced to match the load to the line. The transmission line is a coaxial
cable filled with insulating material of relative dielectric constant of 2.25. The operating
frequency at which perfect matching is desired is 1GHz.a. Given the constraint that the impedance transformer cannot be placed closer than 0.25 m from
the load, yet it should be inserted as close as possible to the load, design the matching network.
Give explicit values for the distance, d, of the quarter-wave transformer from the load, the
characteristic impedance of the transformer, and its physical length, L.
Answers
A 30 m length, 2 MHz-operating lossless transmission line with characteristic impedance Z0 = 50 ohm. A load terminates a transmission line with a 50 impedance.
What is transmission line?
For a transmission line, the typical impedance is always 75 or 50 ohm. Since the transmission line is a distributed parameter component, the two portions vary continually. The term "50 ohm transmission line" designates a line with a characteristic impedance of 50 ohms. The impedance that corresponds to the minimal loss, maximum power, and maximum voltage is 50 Ohms, which is the least undesirable . Signal reflection is avoided whenever a transmission line with a finite length is terminated by a load impedance that is equal to the characteristic impedance.
To learn more about impedance from given link
brainly.com/question/2263607
#SPJ4
for the following truth table, choose the terms appear in the canonical sum-of-products (sop) form for function
Answers
For function 11b, select the terms that appear in the canonical sum of products (SOP) form. 9 0 0 0 0 0 0 1 1 0 1 0 0 0 1 1 1 1 0 0 0 1 0 1 1 1 0 1 1 1 1 0 Abc a'b'e Do'+b+c Ha+b+' Babc Babic ab'c a+b+c Babc abc sb'+o a+bc a+b+c a+b+c.
What are the three different SOP types?What Kinds of SOPs Exist? Step-by-step, hierarchical, and flowchart SOPs can all be categorized into these three groups.
What is LPP's standard form?The canonical form of LPP in matrix notation is as follows: Boost Z = CX (objective function) AX b (restrictions) and X 0 (limitations) apply (non-negativity restrictions).
To know more about canonical sum-of-products visit :-
https://brainly.com/question/12973506
#SPJ1
a uniform steel bar swings from a pivot at one end with a period of 1.7 s . you may want to review (pages 405 - 407) . part a how long is the bar?
Answers
The length of the uniform steel bar is; 1.077 m
How to find the length of the uniform bar?
A physical pendulum is defined as an extended object that, for small angular displacements, it can be modeled to move in simple harmonic motion about a pivot that does not go through the center of mass. The period of this motion is given by the formula;
T = 2π√(I/mgd)
where;
I is the moment of inertia of the object about an axis through the pivot.
d is the distance from the pivot to the center of mass of the object.
The period of the pendulum is given as t = 1.7 seconds
The moment of inertia of the same bar rotating about an axis through one end is gotten from the formula;
I = ¹/₃ML²
Where L is the length of the bar
Since the bar is uniform, the middle of mass is found in the middle and as such; d = L/2
Thus;
T = 2π√(2I/mgL)
Put ¹/₃ML² for I into the period formula and we have;
L = 3gT²/8π²
Thus;
L = 3(9.81 * 1.7²)/8π²
L = 1.077 m
Read more about Uniform bar length at; https://brainly.com/question/15240874
#SPJ1
The heart of the recent hit game SimAquarium is a tight loop that calculates the average position of 256 algae. You are evaluating its cache performance on a machine with a 1024-byte direct-mapped data cache with 16-byte blocks (B = 16).You are given the following definitions://Codestruct algae_position {int x;int y;};struct algae_position grid[16][16];int total_x = 0, total_y = 0;int i, j;//End of CodeAssuming the cache starts empty, when the following code is executed://Codefor (i = 0; i < 16; i++) {for (j = 0; j < 16; j++) {total_x += grid[i][j].x;}}for (i = 0; i < 16; i++) {for (j = 0; j < 16; j++) {total_y += grid[i][j].y;}}//End of CodeThere are (Blank_1) total reads or loads and (Blank_2) reads or loads that miss in the cache,resulting in a cache miss rate of (Blank_3) %.Assuming the cache is emptied again, when the following code is executed://Codefor (i = 0; i < 16; i++) {for (j = 0; j < 16; j++) {total_x += grid[i][j].x;total_y += grid[i][j].y;}}//End of codeThere are (Blank_4) total reads or loads and (Blank_5) reads or loads that miss in the cache,resulting in a cache miss rate of (Blank_6) %.If the cache was twice as big, the miss rate would be (Blank_7) %.A: I got Blank_1 = 512, Blank_2 = 256 and Blank_3 = 50%.I can't seem to figure out the answers for the second loop
Answers
The answer for the second loop is, Total reads or loads = 16 * 16 * 2 = 512
So, Blank_4 = 512
Reads or loads that miss in the cache are 256 because accessing x-coordinates is always missed and accessing y-coordinate is always hit
Blank_5 = 256
Resulting in a cache miss rate is 256/512 = 0.5
Blank_6 = 50%
If the cache is twice as big, it would be 128/512 =0.25
Blank_7 = 25% because a cache was as large for storing the entire grid.
What is cache ?
A cache, which is pronounced "cash," is a piece of hardware or software that is used to temporarily store something in a computing environment, typically data. To enhance the performance of recently or often accessed data, a small quantity of quicker, more expensive memory is employed.
Hence to conclude cache miss rate is 0.5
To know more on cache follow this link:
https://brainly.com/question/25704927
#SPJ4
draw a diesel cycle and label each step with the thermodynamic process that is going on during that step
Answers
A reciprocating internal combustion engine's thermodynamic process is known as the Diesel cycle. The illustration is given in the attachment.
What is thermodynamic process?An alteration to a system's thermodynamic state is referred to as a thermodynamic process. A system changes when it moves from its initial thermodynamic equilibrium state to its final equilibrium state.
The actual course of the process is rarely considered in classical thermodynamics and is not given much attention. Unchanged states of thermodynamic equilibrium persist unless they are broken by a thermodynamic operation that starts a thermodynamic process.
Each of the equilibrium states is fully specified by a set of thermodynamic state variables that are appropriate for the situation and that depend only on the system's current condition, not on the course taken by the processes that led to it.
Learn more about thermodynamic process
https://brainly.com/question/3952974
#SPJ4
engine operating modes are being discussed. technician a says that when the engine is in closed-loop mode, the pcm monitors sensor inputs, then adjusts the timing, air fuel ratio, and emission controls. technician b says the system will switch into open loop when the throttle is fully opened or the oxygen sensors cool down during idle. who is correct?
Answers
When the engine is in closed-loop mode, the PCM monitors sensor inputs, then adjusts the timing, air fuel ratio, and emission controls. Hence technician is correct.
What is technician?Technician is defined as a worker with specialized training, especially in operating scientific machinery or equipment. There are knowledgeable professionals known as technicians in almost every industry.
The crankshaft position sensor has two purposes: it keeps track of engine rpm and aids the computer in determining the crankshaft's relative position so that the PCM can regulate spark timing and fuel supply in the right order. The PCM receives data from the cam sensor to: calculate the engine RPM signal.
Thus, when the engine is in closed-loop mode, the PCM monitors sensor inputs, then adjusts the timing, air fuel ratio, and emission controls. Hence technician is correct.
To learn more about technician, refer to the link below:
https://brainly.com/question/14290207
#SPJ1
Air at standard conditions flows steadily at low speed through a horizontal nozzle, discharging to atmosphere, where the pressure is Patm, meaning P2 = Patm. Inlet and exit areas of the nozzle are A1 = 0.10 m2 and A2 = 0.02 m2 , respectively.
Calculate the pressure required at the nozzle inlet, meaning P1, to yield an exit speed of 50 m/s.
Answers
Using Bernoulli equation we can say that the pressure required at the nozzle inlet, meaning P1, to yield an exit speed of 50 m/s is 1.48 kPa.
How do we calculate the pressure required at the nozzle inlet using Bernoulli equation?equations that control:
[tex]\frac{p_{1}}{\rho}+\frac{V_{1}^{2}}{2}+g z_{1}=\frac{p_{2}}{\rho}+\frac{V_{2}^{2}}{2}+g z_{2}[/tex]
Continuity for incompressible and uniform flow:
[tex]\sum_{\mathrm{CS}} \vec{V} \cdot \vec{A}=0[/tex]
We know that
1) Steady flow.
(2) Incompressible flow.
(3) Frictionless flow.
(4) Flow along a streamline.
(5)[tex]z_{1}=z_{2}[/tex]
(6) Uniform flow at sections (1) and (2).
The maximum speed of 50 m/s is well below 100 m/s, which corresponds to Mach number M≈0.3 in standard air. Hence, the flow may be treated as incompressible.
Apply the Bernoulli equation along a streamline between points (1) and (2) to evaluate [tex]p_{1}[/tex]
p1 − patm = p1 − p2 = ρ/2 (V2^2 −V1^2)
-ρV₁A₁ + ρV₂A₂ = 0 or V₁A₁ = V₂A₂
V₁ = V₂A₂/A₁ = 50 x 0.02/0.10 = 10 m/s
Since air at standard condition , ρ = 1.23 kg/m³
p1 − patm = ρ/2. (V₂²^2−V₁^²)
= 1/2 × 1.23 x (50² −10²)
= 1.48kPa
To know more about Bernoulli equation refer:
https://brainly.com/question/9506577
#SPJ4
the operation of marine transportation determines the efficiency ofmoving goods. the progress in terminals, technologies and management principles improves the moving load, delivery speed in g
Answers
The movement of persons or cargo across waterways is referred to as marine transportation. The company that offers water transportation is called Marine Transport Management, Inc.
How significant is maritime transportation?International trade and the world economy are based on maritime transportation. The number is significantly higher for the majority of poor nations, where shipping accounts for over 80% of all international trade in products. Since 1968, UNCTAD has released the Review on Maritime Transport, which is its flagship report.
Operations and management in the maritime sector are what?The primary goal of this program is to equip you with the knowledge and abilities needed to land prestigious jobs in the offshore and maritime sectors. You will develop the self-assurance necessary for a senior position in the maritime industry in the interpersonal and cross-cultural competencies.
To know more about waterways visit :-
https://brainly.com/question/2453542
#SPJ4
you are using the vi editor to manage a text file on a linux system. you want to type new text into the file. when you type, you want the existing text that comes after the cursor to be pushed down.
Answers
The insert mode is used to type new text into the file in linux system.
What is insert mode in linux system?When inserting text into a file, you should be in insert mode. Command mode is the mode to be in when issuing commands such as moving the cursor, deleting text, copying and pasting, saving the file, and so on. Vi is in command mode when you open a file. Insert mode is required to enter text.In Insert mode, you can enter text, use the Enter key to move to a new line, navigate text with the arrow keys, and use vi as a free-form text editor. Press the Esc key once to return to Command mode.In vi, there are three modes of operation:
Mode of Command: When you launch vi, it is in Command Mode.Insert mode: You can insert text into the file using this mode.Last Line Mode (Escape Mode): While in Command Mode, type a colon [:] to enter Line Mode.The complete question:
"You're using the vi editor to manage a text file on a Linux system. You want to type new text into the file; when you type you want the existing text that comes after the cursor to be pushed down?
What mode do you need to be in to do this?"
To learn more about insert mode refer to :
https://brainly.com/question/29757726
#SPJ4
1. What is the primary goal of penetration testing? a. Attempt to uncover deep vulnerabilities and then manually exploit them b. Scan a network for open FTP ports c. Perform SYN DOS attack towards a server in a network d. Attempt to perform an automated scan to discover vulnerabilities
2. There is often confusion between vulnerability scanning and penetration testing. What is the best explanation of the difference between vulnerability scanning and penetration testing? a. Vulnerability scanning is performed using an automated tool to scan a network known vulnerability signatures. Penetration testing involves attempting to manually uncover deep vulnerabilities just as a threat actor would, and then exploiting them. b. Vulnerability scanning checks a network for outdated versions of services. Penetration testing is attempting to manually uncover deep vulnerabilities just a threat actor would, and then exploiting them. c. Vulnerability scanning is performed by manually scanning a network for known vulnerabilities. Penetration testing is attempting to manually scan a network for known vulnerability signatures using an advanced scanning tool. d. Vulnerability scanning checks a network for open ports and services. Penetratic testing is attempting to manually scan a network for known vulnerability signatu using an advanced scanning tool. 3. Khalid joins a security team where he is assigned an SOC developer role and has to build different teams under SOC. Which of the following teams should he build to deal with providing real-time feedback related to security incidents and threat detections, which can then be utilized to facilitate better prioritization of threats and a mature way of detecting threats? a. Red team b. Blue team c. Purple team d. White team
Answers
1) Note that the primary goal of penetration testing is to 2Attempt to uncover deep vulnerabilities and then manually exploit them" (Option A)
2) The best explanation for the difference between vulnerability scanning and penetration testing is; "Vulnerability scanning is performed using an automated tool to scan a network known vulnerability signatures. Penetration testing involves attempting to manually uncover deep vulnerabilities just as a threat actor would, and then exploiting them." (Option A)
3) Given the above scenario, the team that he should build to deal with providing real-time feedback related to security incidents and threat detections, which can then be utilized to facilitate better prioritization of threats and a mature way of detecting threats is "the Purple Team" (Option C).
Why is Penetration Testing Important?The major reason penetration testing is important for an organization's security is that they teach staff how to deal with any form of hostile entity break-in. Pen tests are used to determine whether a company's security practices are truly effective.
Some compliance rules require penetration testing. Aside from that, you should conduct regular pentests to analyze and upgrade your security procedures against cyberattacks.
Learn more about Penetration Testing;
https://brainly.com/question/29560410
#SPJ1
