The U.S. has plans to build a 30-meter telescope, while the Europeans are thinking about a 39-meter telescope. What technological innovation allows astronomers to be thinking about telescopes with that large an aperture

Answers

Answer 1

Answer:

The mirror in these telescopes will be constructed from many smaller mirrors which will work together.

Explanation:

A telescope is defined as an optical instrument that is used to observe or view the distant objects. A telescope is made up of curved lenses or mirrors or by combining both.

In the context, both the US and the Europeans are planning to make a telescope which is 30 m and 39 m respectively. This could be possible as the mirrors that are used to make these telescope will be made from a many smaller mirrors that will work together as a single large mirror having a very large aperture.


Related Questions

can anyone please help me​

Answers

Answer:its most likely c

Explanation:

Why does temperature increase when heat is lost?

Answers

Answer:

Since kinetic energy is one of the forms of internal energy, the release of heat from an object causes a decrease in the average kinetic energy of its particles. This means that the particles move more sluggishly and the temperature of the object decreases.

Explanation:

How long will it take a 6000W motor to lift a 5000kg load through a height of 2.5m?

Answers

Answer:

20.4375 seconds.

Explanation:

Wattage = Work / time

Work = f * d

F = mass * acceleration

mass = 5000 kg

acceleration = force of gravity

acceleration = 9.81

Force = 5000 * 9.81

Force = 49050 N

Work = F * d

d = 2.5

Work = 49050 * 2.5

Work = 122625 Joules

Wattage = Work / time

time = work / wattage

wattage = 6000 watts

time = 122625 / 6000

time = 20.4375 seconds.

If the velocity of a motorcycle increases from 30 mis too 50m/s in 10 seconds what will be the acceleration of motorcycle?​

Answers

Answer:

2 m/s^2

Explanation:

a = ∆v / ∆t

a = (50 - 30) / 10

a = 20 / 10

a = 2 m/s^2

acceleration = u-v/t

50-30/10

=2m/s

Which of the following sentences is incorrect about pressure?
i) Pressure depends upon the amount of force applied.
ii) Pressure depends on the area upon which is the force is applied.
iii) Pressure is a vector quantity.
iv) The force acting per unit area is called pressure ​

Answers

Answer:

iii) pressure is a vector quantity.

A motorcycle is moving at a constant velocity of 15 meters/second. Then it starts to accelerate and reaches a velocity of 24 meters/second in 3 seconds. What’s the acceleration of the motorcycle over this time? Use .
A.
9 m/s2
B.
8 m/s2
C.
6 m/s2
D.
5 m/s2
E.
3 m/s2

Answers

option E

3m/s square

hope it helped u

define 1 second time​

Answers

Answer:

define 1 second time

One second is the time that elapses during 9,192,631,770 (9.192631770 x 10 9 ) cycles of the radiation produced by the transition between two levels of the cesium 133 atom. ... One second is equal to 1/86,400 of a mean solar day.

Answer:

One part of 86400 part of a day is called one second time.

✌✌✌✌

If the final ​velocity is 0. third equation of motion will be

Answers

Answer:

vf²=vi²+2a∆x

Explanation:

The third equation of motion gives the final velocity of an object under uniform acceleration given the distance traveled and an initial velocity: v 2 = v 0 2 + 2 a d . v^2=v_0^2+2ad. v2=v02+2ad. The graph of the motion of the object.

Which of the following would cause the force of kinetic friction to increase?
A. A decrease in the normal force
B. An increase in us
C. A decrease in lk
D. An increase in the normal force

Answers

The correct answer is D

Answer:

Increase in μk

Explanation:

different ans set

Q- Wheel of a running vehicle has which energy?
(a) Vibrational Kinetic energy
(b) Translational Kinetic energy
(c) Rotational Kinetic energy
(d) All of the above​

Answers

Answer:

Rotational kinetic energy

Explanation:

It is caused by circular motion.

20. A semiconductor is a
A) crystalline solid that conducts current under any condition
B) metallic solid that conducts current under any condition
C) metallic solid that conducts current under certain conditions
D) crystalline solid that conducts current under certain conditions

Answers

Answer:

D) crystalline solid that conducts current under certain conditions

Explanation:

A semiconductor is any crystalline solid material whose electrical conductivity is intermediary between that of insulators and conductors. That is, a semiconductor does not conduct like a conductor but does more than an insulator.

Based on this, a semiconductor is said to only conduct electricity under certain conditions as opposed to conductors that do so under any condition. Example of semiconductors are silicon, carbon, antimony, arsenic etc.

Ag,Au and Cu are called coinage metals why plzzzz hurry its urgent plzzz​

Answers

Answer:

This is because these metals are used for minting (making) coins.

Answer:

It is bcz it is used for making coins

3. Calculate the wavelength of wave that has a frequency of 4.75 x 1012Hz.
a. 1.43 x 1021 m
b. 6.31 x 105 m
1.58 x 104 m
d. 6.31 x 105 m
please help
C.

Answers

Frequency=v=4.75×10^12HzWavelength=?

We know

[tex]\boxed{\sf \lambda=\dfrac{C}{V}}[/tex]

[tex]\\ \sf\longmapsto \lambda=\dfrac{3\times 10^8ms^{-1}}{4.75\times 10^{12}s^{-1}}[/tex]

[tex]\\ \sf\longmapsto \lambda=0.631\times 10^{-4}m[/tex]

[tex]\\ \sf\longmapsto \lambda=6.31\times 10^{-5}m[/tex]

Rearrange this equation so it equals d
v=dt

Answers

Answer:

Below

Explanation:

To solve for d rearrange the formula v = (d)(t) to:

  d = v / t

I'm not to sure if you are using different variables but usually in physics the formula for velocity is v = d / t not v = dt

If you wanted to solve for displacement you would do:

  d = (v)(t)

Hope this helps!

What is the symbol SI unit of time?

Answers

Answer:

second is the SI unit of time

its important please answer ​

Answers

Answer: Well we see that v= u- ft/m

lets say that ft= feet and m= mass

so you divide those and subtract u

leaving you with the value of v which is 13

Which statement best describes the arrangement of electrons in an atom of fluorine (F)?

(1 point) giving brainliest for sure

There are two electrons in the first energy level and seven electrons in the second energy level.

There are two electrons in the first energy level and five electrons in the second energy level.


There are five electrons in the first energy level and two electrons in the second energy level.


There are seven electrons in the first energy level and two electrons in the second energy level.

Answers

Flourine is an element which has 9 electrons. The first energy level can only hold upto 2 electrons so therefore two electrons of the fluorine element will be in the first orbital.

In the second orbital there will be seven electrons. The configuration will be as 1s2, 2s2 , 2p5 .

The first orbital has capacity of two electrons and then the remaining two electrons will be in higher second energy level.

The further 5 electrons will be in lower second energy level which is denoted by p.

Learn more at https://brainly.com/question/24373325

Answer:

#1. 5

#2.They have valence electrons in the same energy level.

#3. Helium atoms have 2 valence electrons, while atoms of the other elements in the group all have 8 valence electrons.

#4. cesium (Cs)

#5.  There are two electrons in the first energy level and seven electrons in the second energy level.

Explanation:

Logam P dan Q sejenis. Logam P yang memiliki panjang 1 meter dipanaskan hingga mengalami kenaikan suhu 12ºC, akibatnya logam bertambah panjang 0,2 cm. Logam Q juga dipanaskan hingga mengalami kenaikan suhu 10°C dan panjangnya bertambah 0,1 cm. Tentukanlah panjang mula-mula logam Q!​

Answers

Answer:

I don't know ???

sorry

what is field selection process

Answers

Answer:

It is a process of offering jobs to desired candidates and offering jobs to the desired applicant.

How can a simulation study be used to learn about a planet we have never visited?
In a simulation study you imitate some conditions and characteristics of the real planet. The simulation can be used as a substitute for real data collected on the planet.
Simulation studies can be used for planets we have already visited.
In a simulation study you imitate as many conditions and characteristics as possible of the real thing, in this case the planet you have not visited. By simulating as many conditions as possible you can visualize what the planet might be like and learn things about it without actually visiting it.
Simulation studies cannot be used to learn about a planet we have never visited because we do not know anything about the planet.

Answers

Hi! I think the answer is C. as we have never visited the planet we can’t be 100% sure but we can have an idea of what the planet might me like. With experimenting with the simulation it can help you get an understanding or an idea of what the planet might be like exactly like option C. I hope this helped Goodluck :)

A simulation study that is used to learn about a planet by simulating as many conditions as possible, you can visualize what the planet might be like and learn things about it without actually visiting it. The correct option is c.

What is simulation?

A simulation is a method of simulating a process or change in the actual world to forecast future events or to explain past events and their causes. These days, simulations are frequently carried out using computers. Scientists use simulations to find answers and to test complicated systems.

A fire drill is used in this instance to get everyone ready for an impending event. In fire drills, the fire alarm is sounded even when there isn't actually a fire.

Therefore, the correct option is c.

To learn more about simulation, refer to the link:

https://brainly.com/question/16359096

#SPJ2

A 9V battery produces a 1.5A current in a piece of wire. What is the resistance of the wire?
8 Ω
9 Ω
6 Ω
7 Ω

Answers

Explanation:

Using Ohm's Law and a bit of substitution, we can use voltage divided by current to solve for resistance. Doing that, we'll get 6 Ohm.


What unit is used to measure the period of a wave?
A. Seconds
B. Meters
C. Hertz
D. Meters/second

Answers

Answer:

D. Meters/Seconds

Explanation:

The time period of a wave is measured in seconds.

A typical wave involves both time and distance.  Consider a sound wave, which is basically a periodic modulation of the local air pressure.  We "hear" the sound because our ears respond to the variations of pressure.

The most common metric of a sound wave is frequency.  This is the rate at which the change in pressure occurs, and is measured in cycles per second, formally known as "hertz".  The period is the inverse of frequency andl has the units of seconds per cycle, commonly stated simply as seconds.

Plz Help me thank uuu...
Which of these is a likely impact of the stronger than normal trade winds on the eastern Pacific ocean?

Warm surface water builds up, causing lower than average temperature.
Warm surface water builds up, causing higher than average temperature.
Warm surface water is reduced, causing colder conditions than normal.
Warm surface water is reduced, causing hotter conditions than normal.

Answers

Answer:

Jet stream would be displaced southwards causing heavy rain and flooding.

Explanation:

The other options of the question were A) Jet stream would be displaced northwards causing drought. B) Jet stream would be displaced southwards causing drought. D) Jet stream would be displaced northwards causing heavy rain and flooding,

The statement that is a likely impact of stronger than normal trade winds in the Pacific Northwest to the United States is "Jet stream would be displaced southwards causing heavy rain and flooding."

We are talking about climate or weather terminology. In this case, we are referring to the "El Niño" (the Children) effect. Its presence affects the weather in North America. This phenomenon combines with the "La Niña) effect and it presents itself every two to seven years, ad they last from 8 to 12 months, affecting the weather conditions of the region.

Answer:

jet stream should be displaced southwards which causes heavy rainfall and flood.

The plane of a5cm*8cm rectangular loop of wire is parallel to a 0.19T magnetic field the loop carries a current of 6.2 A. What torque acts on aloop? What is the magnetic moment of the loop?

Answers

Answer:

Torque; τ = 4.712 × 10^(-3) J

Magnetic moment; M = 0.0248 J/T

Explanation:

Torque is gotten from the formula;

τ = BIA

Where;

B is magnetic field

I is current

A is area

We are given;

B = 0.19T

I = 6.2A

Rectangle dimensions = 5cm by 8cm = 0.05m by 0.08m

Thus;

Area; A = 0.05m × 0.08m = 0.004 m²

Thus;

τ = 0.19 × 6.2 × 0.004

τ = 4.712 × 10^(-3) J

Formula for the magnetic moment is given by;

M = IA

M = 6.2 × 0.004

M = 0.0248 J/T

Describe manipulated Variable

Answers

A manipulated variable is the independent variable in an experiment. It’s called “manipulated” because it’s the one you can change. In other words, you can decide ahead of time to increase it or decrease it. In an experiment you should only have one manipulated variable at a time. The manipulated variable is the independent variable in an experiment.

Electricity flows from
positive to positive
negative to positive
negative to negative
positive to negative

Answers

Answer:

is it from positive to negative am I right tell me if I am wrong

Answer:

positive to negative

The flow of electric current is similar to the flow of water which is from higher level to lower level.

The electric current flow from higher potential region(positive* low concentration of electron) to lower potential region(negative*high concentration of electron)

Those of you who have recently finished high school physics-did you struggle? If you did, where did you most struggle in? Was it the tests? Or a specific topic?
Thank you!

Answers

Answer:

I'm over halfway through it so don't have a complete answer but i think you just need to keep ontop of everything and write down all the key equations on flashcards or something and aim to learn them at the beginning of each topic. i found the longer questions hard so recommend practising those

Explanation:

Two difference between thrust and upthrust .

Answers

Upthrust is the upward force exerted by fluids on the surface of an object immersed in fluids. Thrust:- It is the force acting perpendicular to the surface. Upthrust:- It is the upward force exerted by the fluid on the surface of an object immersed in liquid.

I hope it's help you


Joule is equal to:
Awatt x metre
B.watt x second
C. Newton x Metre
D. Both b and c

Answers

Answer:

The answer is ( D) i. e both b and c.

which substance is an acid ?

Answers

Answer:

According to Arrhenius definition, an acid is a substance that releases hydrogen ion or hydronium ion.

there are also other definition like bronsted and lewis.

I HOPE IT WILL HELP

Other Questions
Fifteen hundred randomly selected South Carolina kindergarten students were observed on the first day of school Rick has been distressed over a long period of time, he has had problems coping with life and relating to people. In addition, he avoids meeting people as he thinks his breathing can be dangerous for others. He also believes that washing his face seven times an hour would keep him healthy. Rick meets all the criteria for abnormality which include _____. how many cubic meters of gravel are in the back of a full dump truck that measures 7m wide by 4m tall by 16m long my sister watches three movies with her friend last night. (true or false?) find the missing length indicated can someone please help me with a and b? what do they mean by amplitude? Green economics and green poltics both focus on a more alternative for every part of the economy. In order forthis change to occur, new economic processes must replace the former ones.a. positiveC. costlyb. negatived. cost effective Complete the equation describing how xand y are related. y = [ ? ]x-2-10123-6-30369Enter the answer thatbelongs in [?] Can you think of a historical film/movie that you've seen and enjoyed? Please provide the name of the movie and what/who the movie was about. (be descriptive, at leastsentences) Find the area of triangles having sides 3cm,4cm,5cm respective. A hunter walks 400m Up a hill which slopes at an angle of 20 to the horizontal. Calculate,correct to the nearest metre, the: a. horizontal distance he covered b.vertical height through which he rises. On March 31 a company needed to estimate its ending inventory to prepare its first quarter financial statements. The following information is available: Beginning inventory, January 1: $5000 Net sales: $79,000 Net purchases: $77,000 The company's gross margin ratio is 20%. Using the gross profit method, the estimated ending inventory value would be:_____.A) $18,800. B) $82,000. C) $15,800. D) $63,200. E) $15,400. Solve the inequation : 2(3-4x) + 3 < 49 2. About how much is 123.1 do you weigh in pounds? Estimate if you don't know Find an online converter and find out how many kilograms that is. Draw a rough sketch of a quadrilateral KLMN. State, (a) two pairs of opposite sides, (b) two pairs of opposite angles, (c) two pairs of adjacent sides, (d) two pairs of adjacent angles. please draw the answer find the height of the triangle Deduce the formula of calcium Phosphide. Two cars started from the same place at the same time but travelled in opposite directions. After 9 hours they were 910 kilometers apart. If the speed of one car is 10 kilometers per hour slower than the other what were their speedss per hour We the people of the United States, in Order to form a more perfect Union, establish Justice, insure domestic Tranquility, provide for the common defence, promote the general Welfare, and secure the Blessings of Liberty to ourselves and our Posterity, do ordain and establish this Constitution for the United States of America.The Constitution of the United States of AmericaBased on the passage, what is the purpose of the Constitution?to protect each citizens right to freedom of speechto end the practice of slavery in the United Statesto create a fair and stable system of governmentIT'S C JUST DID IT!!! if 25 liters of milk can make 8 tin of cheese how many liters of milk would b needed to make 11 tin of cheese?