The primary job of a(n) ____
is to increase the power of a modified radio wave.
Answer:
amplifierExplanation:
Hope it helps:)
#CarryOnLearning
Answer: Amplifier
Explanation: Edge 2021
Have a great day :D
Can a solution be separated by filtration?
Answer:
Filtration is a method for separating an insoluble solid from a liquid. When a mixture of sand and water is filtered: the sand stays behind in the filter paper (it becomes the residue ) the water passes through the filter paper (it becomes the filtrate )
Explanation:
Listo!
Most electricity comes from the burning of
A. Fossil fuels B. Trash C. Wood D. None of the above
Answer:
(A) Fossil Fuels
Answer:
Fossil Fuels
Explanation:
That’s what CK12 told me
Give an example of speed making a difference in the amount of kinetic energy. Tell how you know that kinetic energy amount is different in your example.
Please help this is due today
Answer:
1. A car moving 40 mph has four times as much kinetic energy as one moving 20 mph, while at 60 mph a car carries nine times as much kinetic energy as at 20 mph. Thus a modest increase in speed can cause a large increase in kinetic energy.
PLZ MARK BRAINLIEST THANK AND FIVE STAR:)
Answer:
a car moving 40mph has four times as much kinetic energy as one moving 20 mph, while at 60 mph a car carries nine times as much kinetic energy as at 20 mph.
if you need any more info just dm me
Which equation should be used to calculate the speed of a wave?
speed = frequency x wavelength
speed = frequency x hertz
speed = period x wavelength
speed = period x hertz
The equation should be used to calculate the speed of a wave is speed = frequency x wavelength.
What is the formula for wave speed?The speed of a wave is calculated by the equations: V = λ . f or V = λ/T, and the unit of measurement is m/s. This speed depends on the medium: in gaseous media, the speed is lower than in solid media.
See more about wave speed at brainly.com/question/10715783
The equation should be used to calculate the speed of a wave is speed = frequency x wavelength.
What is Speed of wave?Wave speed is the movement of a progressive wave, which is an energy-moving disturbance that takes the shape of an oscillation and moves from one place to another.
The wavelength and frequency of a wave both affect its speed. A wave's speed is a crucial factor because it enables us to estimate how quickly the wave will disperse in the medium, which is the substance or material that will carry it.
This is the water in the case of ocean waves and the air in the case of sound waves. The kind of wave and the physical properties of the medium in which it is flowing also affect a wave's velocity.
Therefore, The equation should be used to calculate the speed of a wave is speed = frequency x wavelength.
To learn more about Wavelength, refer to the link:
https://brainly.com/question/30607075
#SPJ5
PLEASE HELPPPPPPPPPP I WILL GIVE YOU BRAINLIEST Catalina's class wants to determine if boys or girls recycled more paper each day. They set up separate recycling bins in the classroom and labeled them "Boys" and "Girls." The students then placed their paper items in the correct bins. Which of the following should the students do each day before emptying the bins?
Answer:
what are the answer choices
Explanation:
i dont know the choices so i say count the stuff they recycle, and add the score to the days before.
A spring has a constant of 875 N/m. What hanging mass will cause this spring to stretch 4.5 m?
Answer:
8) A hanging 7.5 kg object stretches a spring 1.1 m. What is the spring constant? 1 . 1 66. 82 NIMO 9) A spring has a constant of 875 N/m. What hanging mass will cause this spring to stretch 4.5 m? Iouliply then divide 875 X 4. 2- - (4 04. 7919) 10) A spring with a spring constant of 25 N/m is stretched 65 cm. What was the force used? 11) A 25 N force stretches a spring 280 cm. What was the spring constant? 12) A 75 N force stretches a spring 175 cm. What was the proportionality constant? 8) 66.82 N/m 9) 401.79 kg 10) 16.25 N 11) 8.93 N/m 12) 42.86 N/m
Explanation:
A spring has a constant of 875 N/m. and the mass which will cause this spring to stretch 4.5 meters is 401.78 kg.
What is Spring constant?The spring constant is a characteristic of a spring which is defined as the ratio of the force affecting the spring to the displacement which is caused by that force. The SI unit of spring constant is N.m⁻¹ (Newton per meter).
The spring constant is:
F = -k/ x
where, k is the spring constant
F denotes the force,
and x denotes the change in the length of the spring.
k = 875N/m
x = 4.5m
We know that
Kx = mg
m= kx/ g
m = 875 × 4.5/ 9.8
m = 401.78kg
Therefore, the mass which will cause this spring to stretch 4.5 meters is 401.78 kg.
Learn more about Spring constant here:
https://brainly.com/question/14159361
#SPJ5
Juan rides his horse with a constant
speed of 18 km/h. How far can he travel
in 1/2 hour?
Answer:
He traveled 9km
Explanation:
To do this problem you need to use the equation which is Speed= distance/time and this problem gives you the speed which is 18 km/h and it gives you the time 1/2 hour so you write the equation 18= d/ 1/2 which his distance is 9km
Which part of the electromagnetic spectrum is typically used to make images based on the temperatures of objects?
X-rays
radio waves
infrared light
visible light
Answer:
Which part of the electromagnetic spectrum is typically used to make images based on the temperatures of objects?
X-rays
radio waves
infrared light<<<----- CORRECT
visible light
Explanation:
Edge 2021
Infrared light is typically used to make images based on the temperatures of objects.
What is meant by electromagnetic spectrum?The range of all EM radiation arranged from high to low frequency (short to long wavelength) according to their frequency or wavelength. is known as the electromagnetic spectrum (EM).
Here,
Similar to visible light, X-rays are a type of electromagnetic radiation. X-rays have a higher energy than light, on the other hand, and can penetrate most materials, including the human body.
Images of inside body tissues and structures are produced using medical x-rays.
Electromagnetic energy in the infrared region of the spectrum can be seen by them. There is a relationship between an object's temperature and the electromagnetic radiation it releases since infrared radiation is strongly related to object temperature.
Hence,
Infrared light is typically used to make images based on the temperatures of objects.
To learn more about electromagnetic spectrum, click:
https://brainly.com/question/15576247
#SPJ5
An elephant kicks a 2.5 kg rock that is initially at rest. The
net force on the rock varies with time as shown below.
What is the rock's change in momentum between 0 ms
and 20 ms?
0.20Answer:
Explanation:
Do all metals stick to magnets? Give an example. I NEED HELP FASTT
Answer:
No
Explanation:
Not all metals stick to magnets. Like aluminum. if you were to stick a magnet on to an aluminum it would fall off.
HELP PLS 100 POINTS TAKING TEST RN
Suppose you are in a car that is going around a curve. The speedometer reads a constant 30
miles per hour. Which of the following is NOT true?
You and the car are accelerating.
Your speed is constant.
Your velocity is constant.
Your acceleration is constant.
Answer:
sorry I hate when people press your question and answer with a fake answer for points, however you said it was 100 points and it's not even close lol but it is "your speed Is constant" that is not true
Is gravitational energy a form of kinetic energy or potential energy? Why do you think that?
Please help due today!!
Answer:
When something is lifted, work is done on the object against the pull of gravity. This work is converted to a form of potential energy called gravitational potential energy. When the item falls towards Earth like an apple from a tree, gravitational potential energy is converted into kinetic energy.
Which is a disadvantage of storing data digitally?
A.The parts of devices that store data are unstable compared to analog storage.
B. Other people can access personal data when a virus is copied with the data.
C. Noise makes digital data unreliable when copied.
D. The quality of copies stays the same as more copies are made.
Answer:
I thinks it’s b sorry if it didn’t help
Explanation:
One of the disadvantage of storing data digitally is that, other people can access personal data when a virus is copied with the data. Hence, security of data cannot be ensured.
What is digital storing?Nowadays there are many technological ways to store our credentials and essential documents. These data can be stored in virtual space such as in computers phones like electronic gadgets.
Compared to the conventional storage methods or paper format, digital storage is easy and fast easily accessible from anywhere in any format and can be shared. These data cannot damaged as paper document.
However, the digital storing have some drawbacks. Sometimes these data goes insecure and other people can access personal data when a virus is copied with the data.
Find more on digital storage:
https://brainly.com/question/13150495
#SPJ2
Plants are eaten by grasshoppers, which are eaten by mice, which are eaten by snakes.
Answer:
food chain / web lol? was this a question?
What is the action and reaction if a person takes a step back
Answer:
action is backward and i guess reaction is sad
plzzz helpp mee guysss!!! plzzzz
A car is traveling north on the interstate. They cover 645 miles in 9 hours. What is the car's average velocity?
Answer:
ycuvivxuduviguv8vifudsyfucuv
2. Which animal is a primary consumer in the Ethiopian Highlands?
walia ibex
tiger
black lion
prairie dog
Answer: Wallia Ibex
Explanation: Black lions and tigers are not primary consumers. However, the Wallia Ibex is a primary consumer, hope it helps :D.
how much energy must be absorbed by water with a mass of 0.5kg in order to raise the tempature from 30c to 65c
Answer:
62760J
Explanation:
Given parameters:
Mass = 0.5kg = 500g
Initial temperature = 30°C
Final temperature = 65°C
Unknown:
How much energy is absorbed by the water = ?
Solution:
To solve this problem, we use the expression below:
H = m C Δt
H = m x C x (t₂ - t₁ )
m is the mass
C is the specific heat = 4.184J/g°C
t₂ is the final temperature
t₁ is the initial temperature
So;
H = 500 x 4.184 x (65 - 30) = 62760J
If an ice cube with the mass of 5.0 grams melts in a closed system such as closed glass jar, what is the mass of the liquid water after the ice cubes completely melts?
A) 4.0 grams
B) 5.0 grams
C) 6.0 grams
D) The mass cannot be determined without knowing the volume.
Answer:
4.0 grams
Explanation:
Answer:
B) 5.0 grams
Explanation:
Its right
A 7.20x10^3 N spacecraft travels away from the Earth. What is its weight when it is a) 6.38×10^3 km
and b) 1.28x10^4 km from the surface of the Earth?
Answer:
1,252
Explanation:
please help!!! 50 POINTS
1) The diagram below models the energy involved in a reaction that changes methane gas and oxygen into carbon dioxide and water.
The graph shows a certain level of energy of reactants C H2 + 2 O2, which increases on the breaking of bonds as the atoms are separated. The energy is then consumed when the making of bonds decreases the energy of products, C O2 + 2 H2 O, to a level much lower than the energy of reactants. The energy change of negative delta H depicts the exothermic reaction.
Which observations about the energy released in making the bonds are correct?
a) It is greater than the energy absorbed in breaking the bonds. The excess is converted to chemical energy.
b) It is greater than the energy absorbed in breaking the bonds. The excess is converted to thermal energy.
c) It is less than the energy absorbed in breaking the bonds. The excess is converted to thermal energy.
d) It is less than the energy absorbed in breaking the bonds. The excess is converted to chemical energy.
2) Carbon dioxide is an example of a molecule where the component atoms of carbon and oxygen are held together by chemical bonds. Which statement correctly describes the reason for these chemical bonds?
a) The nuclei and electrons of the atoms are attracted to each other.
b) The strong nuclear energy bonds the atoms together.
c) The combination of chemical energy stored in each atom makes the bonds strong.
d) The structure of atoms increases their atomic energy, which creates the bonds.
3) When burning fuel for cooking, the pan and the food absorb energy and heat up. In this process, which form of energy is chemical energy converted into?(1 point)
a) thermal energy
b) atomic energy
c) mechanical energy
d) radiant energy
4) Which of the following statement/s about the energy involved in a chemical reaction is/are correct?
I. The energy stored in chemical bonds is kinetic energy.
II. The total energy is conserved during a chemical reaction.
III. Chemical energy can be converted to other forms of energy.
IV. Energy is needed to both break bonds and form new bonds.
a) III and IV only
b) II and III only
c) II, III, and IV only
d) I only
5) Burning coal results in several energy transformations to generate electricity. Which statement is correct about the chemical energy stored in chemical bonds between atoms when coal is burned?
a) It allows the bonds to form and then break.
b) It helps transform kinetic energy to potential energy.
c) It increases the number of atoms.
d) It converts to thermal energy.
thank you!!
Answer:
Explanation:
1. It is greater than the energy absorbed in breaking the bonds. The excess is converted to thermal energy.
2. The nuclei and electrons of the atoms are attracted to each other
3. thermal energy
4. II and III only
5. It converts to thermal energy.
What happens when stress builds up at faults?
A. Energy is absorbed
B. Rock can bend and break
C. Plates form on the lithosphere
D. earthquakes develop at earths surface
Answer:
The answer is D because when the faults move that is the tectonic plates moving. So earth quakes will be forming when the fault moves.
Explanation:
II. What examples can you find in your home that are examples of kinetic and potential energy (name two for each type
of energy)?
11. Kinetic:
12. Kinetic:
13. Potential
14. Potential:
Answer:
11. A door accelerating when pushing it.
12. A person sliding along the floor.
13. Water dropping from the faucet.
14. Courtains descending when loosening them.
Explanation:
For kinetic energy, any example that does not move horizontally will do. Something accelerating or decelerating is a good example (Ek=1/2mv^2, where v is velocity).
For potential energy try to think of things moving vertically. Potential energy comes from the height of an object (Ep=mgh, where h is height).
Notice that example 13 and 14 represent potential energy turning into kinetic energy, height becomes lower, so velocity increases.
When we stretch a spring, which two factors affect how much elastic
potential energy is stored in it
Tafu is working with subatomic particles in the physics lab. a positron is traveling in a straight line down the particle accelerator. tafu models its position with the function p(t)= t2 t â 1 where t>1. in the limit calculations below, if you need to use -â or â, enter -infinity or infinity. (a) calculate the limit
Answer:
Infinity
Explanation:
When you have a limit approaching infinity one method you can use is to remember that the highest power dominants all of the other ones so when we have (t^2)/t-1 like in your problem, we see that t^2 has the highest power of 2 so if that's going to infinity and it's not being divided by any powers higher than it will just be inifinity.
We have that for the Question, it can be said that in the limit calculations below, if you need to use -â or â, enter -infinity or infinity. the limit is
[tex]Lim_{t->\infty} p(t)= \infty[/tex]
From the question we are told
Tafu is working with subatomic particles in the physics lab. a positron is traveling in a straight line down the particle accelerator.tafu models its position with the function
p(t)= t2 t â 1 where t>1.
in the limit calculations below, if you need to use -â or â, enter -infinity or infinity.
(a) calculate the limit
Generally the equation for the Question is mathematically given as
[tex]p(t)=\frac{t^2}{t-1}\\\\Therefore\\\\For Lim_{\infty}\\\\We have\\\\ Lim_{t->\infty} p(t)= Lim_{t->\infty}\frac{t^2}{t-1}\\\\[/tex]
Since, the equivalent degree of numerator (t^2) is greater than that of the denominator
[tex]Lim_{t->\infty} p(t)= \infty[/tex]
For more information on this visit
https://brainly.com/question/23379286
I had to show a screenshot of this because brainly thinks it detects a bad word
which statements describe kinetic and potential energy? check all that apply.
Answer:
ACDE
Explanation:
Energy is generally described as the ability to do work by a body. There are two main forms of energy which are the kinetic energy and the potential energy.
Other energy forms stems from these two energy types.
Potential energy expressly deals with the position of a body. It is mathematically given as:Potential energy = mass x acceleration due to gravity x height
It is the energy stored based on the position of particles within a mediumThese description satisfies options A, C
Kinetic energy is the energy due to the motion of body. It is mathematically given as:Kinetic energy = [tex]\frac{1}{2}[/tex] x mass x velocity²
Also, kinetic energy is directly proportional to the velocity of a body.The description satisfies DE
How does the sun maintain its high temperature and energy output?
Answer:
The core of the sun is the region that extends from the center to about 20–25% of the solar radius. It is here, in the core, where energy is produced by hydrogen atoms (H) being converted into nuclei of helium (He). ... The core is the only part of the sun that produces an appreciable amount of heat through fusion.
Explanation:
I got you
By not running out of fuel (Hydrogen).
Rest assured ... When the sun runs low on Hydrogen, it'll go through several complex changes, and it'll end up at much much lower temperature, with much much lower energy output.
Which is a unit of momentum?
A) N-m/s
B) kg-m/s
C) kg-m/s2
D) N-m/s2
please hurry i need help asap, will mark brainliest
Answer:
unit of momentum is kgm/s2
The unit for momentum can be Newton-second (Ns). In the CGS system, if the mass is in grams and the velocity in centimeters per second, then the unit of momentum will be gram-centimeters per second (g⋅cm/s).
What is momentum ?"Momentum, product of the mass of a particle and its velocity. Momentum is a vector quantity; i.e., it has both magnitude and direction. Isaac Newton's second law of motion states that the time rate of change of momentum is equal to the force acting on the particle. See Newton's laws of motion."
Know more about momentum here
https://brainly.com/question/4956182
#SPJ2
f. It is easier to pull a lawn roller than to push it, why?
Answer:
because you use more force to push than to pull (well it depends how heavy it is)
Explanation:
Martha, a first-grade teacher, is worried that if doesn't stay In at work to grade papers her principal will think she is lazy She is also worried that if she stays late at work her partner will be angry. This of conflict is known as
Answer:
Character vs self
Explanation:
The reason is because Martha is thinking to much about the negative things and it is making her feel like she is fighting her own body for control.
