The picture below shows a person swinging a yo-yo in a circle. Which vector shows the velocity of the yo-yo at this moment?
A. B
B. A
C. C
D. D

Answer: The answer is B

Explanation:

There are 4 fundamental forces that hold matter together.

- Gravitational Force

- Electromagnetic Force

- Strong Nuclear Force

- Weak Nuclear Force

We have barely just scratched the info about nuclear forces but the reason why B is the answer to the question is that Strong nuclear force actually holds the protons and neutrons together in the nucleus of an atom, much like the picture in B.

Answer: B

Explanation:

Answer:

A ball rolls off the table and free falls to the ground. Which statement accurately describes its acceleration? Its acceleration is downward but remains a constant value as it falls.

Answer: This phenomenon happens due to upthrust exerted by water.

Explanation:

We know that,

Liquid Pressure is directly proportional to the height of the vertical column in the liquid.(P∝h)

When a bucket filled water is sunk into the water container, there occur difference in the pressure in top and bottom of the water container. Due to this, water exerts an upward force on the bucket filled with water. This is called Uprthrust.

Upthrust on the bucket makes the bucket filled with water lose some of it's weight and causes apparent loss in weight.

Hence, the bucket filled with water seems light while it sinks into water.

Answer:

increase

Explanation:

please mark as brainlyest

Answer

A.Increses

Explanation:

Answer:

Standard weight: We calculate the standard weight as follows: G = L * mweight, where L is the length of the beam calculated as the difference between the extreme points of the beam body along the direction of the beam axis, taking into account all features except holes.

Explanation:

I want Brainliest plz!!

: Lili

Answer:

40/3

M/s

11-19

These are the answers

Explanation:

The density of silver is 10.5g/cm3

=2500.0g/10.5g/cm3

=238.09cm3

238.1cm3 to nearest tenth.

I hope my answer helps. Please mark as brainliest.

The dimension of a/b where x is the distance and t is the time is T

Given the expression

x = at + bt²

where

x is the distance

t is the time

Based on the homogeneity principle, the expression on the left-hand side must be equal to that on the right. Hence;

x = at

[tex]a = \frac{x}{t}[/tex]

Since x is the distance and distance is measured in metres, the dimension equivalent will be the length 'L'

Since t is the time and time is measured in seconds, the dimension equivalent will be the seconds 'T'

[tex]a=\frac{L}{T}[/tex]

Similarly;

x  = bt²

[tex]b=\frac{x}{t^2}\\b=\frac{L}{T^2}[/tex]

Next is to get a/b;

[tex]\frac{a}{b} = \frac{L}{T} \div \frac{L}{T^2}\\\frac{a}{b} = \frac{L}{T}*\frac{T^2}{L} \\\frac{a}{b} =\frac{T^2}{T}\\\frac{a}{b} =T[/tex]

Hence the dimension of a/b is T

Answer:

speed

Explanation:

according to your question, your answer is speed

Answer:

6s , 60mls

Explanation:

hope this helps love

Answer:

0m/s

Explanation:

When the object strikes the ground, it then becomes in uniform motion and when an object is in uniform motion, the velocity is 0

Answer:

190v I believe

hope this helped a little and if it did pls mark brainiest :)

Answer:

Ohm's law states that the current through a conductor between two points is directly proportional to the voltage across the two points.

Answer:

88 m ^2

Explanation:

The total cost of the energy consumption for the given time period is $0.0364

The given parameters include;

The total energy consumed in the process of heating the water;

Total electrical Energy  = Energy of the heater (kWh) + Energy of the heated water (kWh)

Energy of the heater (kWh) = power x time

                                = 4 kW x 0.067 h

                                 = 0.268 kWh

Energy of the heated water (J) = mcΔt

where;

Δt is the change in temperature = t₂ - t₁

                                                      = 50 ⁰C  -  20 ⁰C = 30⁰C

Energy of the heated water (J) = 1 x 4200 x 30

                                               = 126,000 J

Electrical power of the heated water (Watts) = [tex]\frac{126,000 \ J}{4 \ \min} \times \frac{1 \min}{60 \ s} = 525 \ W[/tex]

Energy of the heated water (kWh) = [tex]\frac{525}{1000} \times 4\min\times \frac{1 \ hr}{60 \min} = 0.035 \ kWh[/tex]

Total electrical Energy  = 0.268 kWh  +  0.035 kWh

                                       = 0.303 kWh

The total cost of the energy consumed is calculated as;

[tex]Total \ cost = \frac{\$ \ 0.12}{kWh} \times 0.303 \ kWh = \$ \ 0.0364[/tex]

Therefore, the total cost of the energy consumption is $0.0364

To learn more about cost of electrical energy calculation, please visit: https://brainly.com/question/17924004

One of the scientist's jobs is to report the results of his experiments to all the other scientists in the world.

There isn't a single real science shop anywhere in the world that uses the US customary system of units. Not one.

Even in the measly three countries that use it for measuring carpet, pumping gas, and weighing fish ... Myanmar, Liberia, an the USA ... the scientists do their work in the SI/MKS/metric system.

Answer:

dude just use the calculator fr

please mark this answer as brainlist

Answer:

density =   mass/ volume

5=4000/ volume

volume=4000/5

volume=800 cm^-3

Answer:

The centripetal acceleration of the stone is 5 m/s²

Explanation:

The length of the string to which the stone is attached, r = 1 m

The speed with which the string is rotated, v = 5 m/s

The centripetal acceleration, [tex]a_c[/tex], is given as follows;

[tex]a_c = \dfrac{v^2}{r}[/tex]

Therefore, the centripetal acceleration of the stone found as follows;

[tex]a_c = \dfrac{(5 \ m/s)^2}{1 \ m} = 5 \ m/s^2[/tex]

The centripetal acceleration of the stone, [tex]a_c[/tex] = 5 m/s².

Answer:

connect two 9 ohms resistance in series now it becomes 18 ohm

Explanation:

If the mass of the inclined plane is large enough, could N ever be equal to mgcosθ. Reasons?

So far I've come up with: mgcosθ−N=ma meaning if N were to equal mgcosθ, ma=0. Since the surfaces are frictionless and since N is acting on the inclined plane too(it'll have a horizontal component), this isn't possible. Am I right? Where am I going wrong?

Answer:

option b is correct..................

Answer:

The gravitational force between m₁ and m₂, is approximately 1.06789 × 10⁻⁶ N

Explanation:

The details of the given masses having gravitational attractive force between them are;

m₁ = 20 kg, r₁ = 10 cm = 0.1 m, m₂ = 50 kg, and r₂ = 15 cm = 0.15 m

The gravitational force between m₁ and m₂ is given by Newton's Law of gravitation as follows;

[tex]F =G \cdot \dfrac{m_{1} \cdot m_{2}}{r^{2}}[/tex]

Where;

F = The gravitational force between m₁ and m₂

G = The universal gravitational constant = 6.67430 × 10⁻¹¹ N·m²/kg²

r₂ = 0.1 m + 0.15 m = 0.25 m

Therefore, we have;

[tex]F = 6.67430 \times 10^{-11} \ N \cdot m^2/kg \times \dfrac{20 \ kg\times 50 \ kg}{(0.1 \ m+ 0.15 \ m)^{2}} \approx 1.06789 \times 10^{-6} \ N[/tex]

The gravitational force between m₁ and m₂, F ≈ 1.06789 × 10⁻⁶ N

Answer:

c

Explanation:

Answer:

To summarize, an object moving in uniform circular motion is moving around the perimeter of the circle with a constant speed. While the speed of the object is constant, its velocity is changing. Velocity, being a vector, has a constant magnitude but a changing direction.

Explanation:

Speed refers to how fast an object is moving. It can be thought of as the rate at which an object covers distance.

Velocity refers to the rate at which an object changes its position. If you picture a person moving rapidly - one step forward and one step back- always returning to the original starting position, the speed is very rapid, but the velocity is zero. Because the person always returns to the original position, this motion would bébé result in a change in position. Since velocity is defined as the rate at which the position changes, this motion results in zero velocity. To maximize velocity, every effort must be made to maximize the amount an object is displaced from its original position. Every movement should be moving the object further from where it started. Velocity is DIRECTION AWARE. When evaluating the velocity of an object, you have to keep track of direction. This is one of the essential differences between speed and velocity: speed does not keep track of direction, while velocity is directionally aware.

So, when the moon moves around the Earth, the speed remains constant, but since it's moving in an elliptical orbit, it's direction is constantly changing.

Answer:

0 deg C = 4.81E4     pressure at 0 deg

100 deg C = 6.48E4     pressure at steam point

100 deg C - 50 deg C = (6.48 - 4.81) * 10^4 = 1.67E4 Pa

50 deg C = 50 / 100 * 1.67E4 + 4.81E4 = 5.65E4 Pa Just the halfway point between the two given pressures

Answer:

Because rice mill is more advanced than dhiki.

It is the developed form of the dhiki.