The new hybrid car can get 51.5 km/gal. It has a top speed of 40000.00 cm/min and is 4m long. How fast can the car go in m/hr?

Answer:

89%.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

2Li + 2H2O —> 2LiOH + H2

Next, we shall determine the masses of Li and H2O that reacted and the mass of LiOH produced from the balanced equation.

This is illustrated below:

Molar mass of Li = 7 g/mol

Mass of Li from the balanced equation = 2 x 7 = 14 g

Molar mass of H2O = (2x1) + 16 = 18 g/mol

Mass of H2O from the balanced equation = 2 x 18 = 36 g

Molar mass of LiOH = 7 + 16 + 1 = 24 g/mol

Mass of LiOH from the balanced equation = 2 x 24 = 48 g

Summary:

From the balanced equation above,

14 g of Li reacted with 36 g of H2O to produce 48 g of LiOH.

Next, we shall determine the limiting reactant. This can be obtained as follow:

From the balanced equation above,

14 g of Li reacted with 36 g of H2O.

Therefore, 7.4 g of Li will react with = (7.4 x 36)/14 = 19.03 g of H2O.

From the calculation made above, we can see that it will take a higher amount i.e 19.03 g than what was given i.e 10.2 g of H2O to react completely with 7.4 g of Li.

Therefore, H2O is the limiting reactant and Li is the excess reactant.

Next, we shall determine the theoretical yield of LiOH.

In this case we shall use the limiting reactant.

The limiting reactant is H2O and the theoretical yield of LiOH can be obtained as follow:

From the balanced equation above,

36 g of H2O reacted to produce 48 g of LiOH.

Therefore, 10.2 g of H2O will react to produce = (10.2 x 48)/36 = 13.6 g of LiOH.

Therefore, the theoretical yield of LiOH is 13.6 g

Finally, we shall determine the percentage yield of LiOH. This can be obtained as follow:

Actual yield = 12.1 g

Theoretical yield = 13.6 g

Percentage yield =..?

Percentage yield = Actual yield /Theoretical yield x 100

Percentage yield = 12.1/ 13.6 x 100

Percentage yield = 89%

Therefore, the percentage yield LiOH is 89%.

Answer:

[tex]pH=2.28[/tex]

Explanation:

Hello,

In this case, for the acid dissociation of formic acid (HCOOH) we have:

[tex]HCOOH(aq)\rightarrow H^+(aq)+HCOO^-(aq)[/tex]

Whose equilibrium expression is:

[tex]Ka=\frac{[H^+][HCOO^-]}{[HCOOH]}[/tex]

That in terms of the reaction extent is:

[tex]1.8x10^{-4}=\frac{x*x}{0.16-x}[/tex]

Thus, solving for [tex]x[/tex] which is also equal to the concentration of hydrogen ions we obtain:

[tex]x=0.00528M[/tex]

[tex][H^+]=0.00528M[/tex]

Then, as the pH is computed as:

[tex]pH=-log([H^+])[/tex]

The pH turns out:

[tex]pH=-log(0.00528M)\\\\pH=2.28[/tex]

Regards.

Answer:

The two elements with atomic number 9 and 12 are represented by letter Q and R respectively, where Q represents fluorine atom and R represents magnesium atom.

1. Electronic configuration of R that is magnesium (atomic number 12) is:

1s2 2s2 2p6 3s2

2. Q represents fluorine atom, which belongs to group 17 in periodic table that is the most reactive and lightest member of the group.

3. Q and R that is fluorine and magnesium combinely form magnesium fluoride or MgF2.

Answer:

THE MOLAR HEAT CAPACITY OF HEXANE IS 290.027 J/ C

Explanation:

1604 J of heat is added to 48.9 g of hexane

To calculate the molar heat capacity of hexane, it is important to note that the molar heat capacity of a substance is the measure of the amount of heat needed to raise 1 mole of a substance by 1 K.

Since 1604 J of heat = 48.9 g of hexane

Molar mass of hexane = 86 g/mol = 1 mole

then;

1604 J = 48.9 g

x = 86 g

x = 1604 * 86 / 48.9

x = 4205.4 J

Hence, 4205.4 J of heat will be added to 1 mole or 86 g of hexane to raise the temperature by 14.5 C.

In other words,

heat = molar heat capacity * temperature change

molar heat capacity = heat/ temperature change

Molar heat capacity = 4205.4 J / 14.5 C

Molar heat capacity = 290.027 J/C

The molar heat capacity of hexane is 290.027 J/ C

Answer:

The edge length of a face-centered cubic unit cell is 435.6 pm.

Explanation:

In a face-centered cubic unit cell, each of the eight corners is occupied by one atom and each of the six faces is occupied by a single atom.

Hence, the number of atoms in an FCC unit cell is:

[tex] 8*\frac{1}{8} + 6*\frac{1}{2} = 4 atoms [/tex]

In a face-centered cubic unit cell, to find the edge length we need to use Pythagorean Theorem:

[tex] a^{2} + a^{2} = (4R)^{2} [/tex]     (1)

Where:

a: is the edge length

R: is the radius of each atom = 154 pm      

By solving equation (1) for "a" we have:

[tex] a = 2R\sqrt{2} = 2*154 pm*\sqrt{2} = 435.6 pm [/tex]    

Therefore, the edge length of a face-centered cubic unit cell is 435.6 pm.   

I hope it helps you!

Answer:

C. 0.191 M

Explanation:

Our goal for this question, is to calculate the concentration of the HCl solution. For this, in the experiment, a solution of NaOH was used to find the moles of HCl. Therefore, our first step is to know the reaction between HCl and NaOH:

[tex]HCl~+~NaOH~->~NaCl~+~H_2O[/tex]

The "titrant" in this case is the NaOH solution. If we know the concentration of NaOH (0.100M) and the volume of NaOH (38.2 mL=0.0382 L), we can calculate the moles using the molarity equation:

[tex]M=\frac{mol}{L}[/tex]

[tex]0.100~M=\frac{mol}{0.0382~L}[/tex]

[tex]mol=0.100~M*0.0382~L=0.0382~mol~of~NaOH[/tex]

Now, in the reaction, we have a 1:1 molar ratio between HCl and NaOH (1 mol of HCl is consumed for each mole of NaOH added). Therefore we will have the same amount of moles of HCl in the solution:

[tex]0.0382~mol~of~NaOH\frac{1~mol~HCl}{1~mol~NaOH}=0.0382~mol~HCl[/tex]

If we want to calculate the molarity of the HCl solution we have to divide by the litters of HCl used in the experiment (20 mL= 0.02 L):

[tex]\frac{0.0382~mol~HCl}{0.02~L}~=~0.191~M[/tex]

The concentration of the HCl solution is 0.191 M

I hope it helps!

Answer:

Atomic mass is calculated by adding protons and neutrons.

Explanation:

Atomic mass is the sum of protons and neutrons in an atomic nucleus. For example, the element Oxygen has 8 protons (derived from the atomic number) and 8 neutrons (derived from subtracting the amount of protons from the atomic mass).

We can craft an equation to show the relationship between these variables.

M - N = P, where M = Mass, N = Neutrons, and P = Protons

This equation can be rearranged to show the relationship between the neutrons and protons leading to the atomic mass. Simply add N to both sides of the equation.

M = N + P

This shows that atomic mass is equivalent to the sum of protons and neutrons in an atom's nucleus.

Answer:

A

Explanation:

Absorbing moisture to protect goods from damage. Hence, option A is correct.

Silica gel is a desiccant, or drying agent, that manufacturers often place in little packets to keep moisture from damaging certain food and commercial products.

Silica Gel is a good drying agent for preventing corrosion, contamination, spoilage, and mould growth in many commodities and products due to its physical properties.

Learn more about silica gel here:

https://brainly.com/question/18723447

#SPJ2

Answer:

[tex]1.242 \times 10^{25}\text{ atoms H}[/tex]

Explanation:

You must convert the mass of B₄H₁₀ to moles of B₄H₁₀, then to molecules of B₄H₁₀, and finally to atoms of H.

1. Moles of B₄H₁₀

[tex]\text{Moles of B$_{4}$H}_{10} = \text{110.0 g B$_{4}$H}_{10} \times \dfrac{\text{1 mol B$_{4}$H}_{10}}{\text{53.32 g B$_{4}$H}_{10}} = \text{2.063 mol B$_{4}$H}_{10}[/tex]

2. Molecules of B₄H₁₀

[tex]\text{No. of molecules} = \text{2.063 mol B$_{4}$H}_{10} \times \dfrac{6.022 \times 10^{23}\text{ molecules B$_{4}$H}_{10}}{\text{1 mol B$_{4}$H}_{10}}\\\\=1.242 \times 10^{24}\text{ molecules B$_{4}$H}_{10}[/tex]

3. Atoms of H

[tex]\text{Atoms of H} = 1.242 \times 10^{24}\text{ molecules B$_{4}$H}_{10} \times \dfrac{\text{10 atoms H}}{\text{1 molecule B$_{4}$H}_{10}}\\\\= \mathbf{1.242 \times 10^{25}}\textbf{ atoms H}[/tex]

Answer:

[tex]\rho _{oil}<\rho _{plastic}<\rho _{water}[/tex]

Explanation:

Hello,

In this case, since water and oil are immiscible due to the oil's nonpolarity and water's polarity, when mixed, the oil remains on the water since it is less dense than water. In such a way, for a plastic sunk in the oil and floating on the water (in middle of them) we can conclude that the plastic have a mid density, therefore, the required organization is:

[tex]\rho _{oil}<\rho _{plastic}<\rho _{water}[/tex]

Best regards.

Answer:

what does little birdie say in the birth of their differences lak lak lak nu pasand aayi baby sleep are no longer children all strong industry all strong baby to show the meaning of rice is here to get up from sleep meaning of lips is Hasan let the mother is saying the baby to sleep in a new

Taking into account the definition of molarity and the molar mass of the compound, the correct answer is option (d): the mass of FeSO₄.7H₂O required for preparation of 125 mL of 0.90 M  solution is 31 g.

In first place, you have to know tha molarity is a measure of the concentration of that substance that indicates the number of moles of solute present in the solution.

The molarity of a solution is calculated by dividing the moles of the solute by the volume of the solution.

[tex]molarity=\frac{number of moles of solute}{volume of solution}[/tex]

Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].

In this case, you know:

So, by definition of molarity, the number of moles is calculated as:

[tex]0.90 M=\frac{number of moles of solute}{0.125 L}[/tex]

Solving:

number of moles of solute= 0.90 M× 0.125 L

number of moles of solute= 0.1125 moles

On the other side, molar mass is the mass of one mole of a substance, which can be an element or a compound. In this case, the molar mass of FeSO₄.7H₂O is 277.85 [tex]\frac{g}{mole}[/tex].

Then you can apply the following rule of three: if by definition of molar mass, 1 mole of the compound contains 277.85 g, 0.1125 mole contains how much mass?

[tex]mass=\frac{0.1125 moles*277.85 g}{1 mole}[/tex]

Solving:

mass ≅ 31 g

Finally, the correct answer is option (d): the mass of FeSO₄.7H₂O required for preparation of 125 mL of 0.90 M  solution is 31 g.

Learn more about molarity with this example: brainly.com/question/15406534?referrer=searchResults

Answer:

A. mm,cm,m,Km

B. mg, g, Kg

C. mL,L

D. ms, s, min, h

Explanation:

Answer:

β particles

Explanation:

The most common radioactive isotope of carbon is C-13.

The unbalanced nuclear equation is

[tex]\rm _{6}^{13}C \longrightarrow \, ? + \, _{7}^{13N}[/tex]

Let's write the question mark as a nuclear symbol.

[tex]\rm _{6}^{13}C} \longrightarrow \, _{Z}^{A}X+ \, _{7}^{13}N[/tex]

The main point to remember in balancing nuclear equations is that the sums of the superscripts and the subscripts must be the same on each side of the equation.  

Then

13 =  A + 13, so A =  13 - 13 = 0, and

6 = Z + 7, so Z  = 6 - 7 = -1

Then, your nuclear equation becomes

[tex]\rm _{6}^{13}C \longrightarrow \, _{-1}^{0}M + \, _{7}^{13}N[/tex]

The particle with "zero" mass and a charge of -1 is an electron, so the balanced nuclear equation is

[tex]\rm _{6}^{13}C \longrightarrow \, _{-1}^{0}e + \, _{7}^{13}N[/tex]

The radiation consists of β particles (electrons)

Answer:

I think think that the one above me is beta radiation

Explanation:

Answer:

5.94×10¯³

Explanation:

The following data were obtained from the question:

Concentration of N2, [N2] = 0.036 M

Concentration of H2, [H2] = 0.15 M

Equilibrium constant (Kc) = 0.29 M

Concentration of NH3, [NH3] =.…?

The equation for the reaction is given below:

N2(g) + 3H2(g) <=> 2NH3(g)

Thus, we can determine the concentration of NH3 by using the equilibrium expression for the reaction.

This is illustrated below:

The equilibrium constant for a reaction is simply defined as the ratio of the concentration of the product raised to their coefficient to the concentration of the reactant raised to their coefficient.

The equilibrium constant for the above equation is given below:

Kc = [NH3]² / [N2] [H2]³

Inputting the value of Kc, [N2], and [H2] the value of [NH3]can be obtained as follow:

Kc = [NH3]² / [N2] [H2]³

0.29 = [NH3]²/ 0.036 × 0.15³

Cross multiply

[NH3]² = 0.29 × 0.036 × 0.15³

[NH3]² = 3.5235×10¯⁵

Take the square root of both side

[NH3] = √(3.5235×10¯⁵)

[NH3] = 5.94×10¯³

Therefore, the concentration of NH3, [NH3] is 5.94×10¯³ M.

3 2 1 is the set of quantum numbers.

The set of numbers used to describe the position and energy of the electron in an atom is called quantum numbers. There are four quantum numbers, namely, principal, azimuthal, magnetic, and spin quantum numbers.

The rules for quantum numbers are: (n) can be any positive, nonzero integral value. (l) can be zero or any positive integer but not larger than (n-1). l = 0, 1, 2, 3, 4, …. (n-1) (ml) values follow the equation.

Learn more about quantum numbers here: https://brainly.com/question/24095340

#SPJ2

Answer:

848 torr  

Explanation:

The only variables are the pressure and the volume, so we can use Boyle's Law.

p₁V₁ = p₂V₂

Data:

p₁ = 565 torr; V₁ = 24.0 L

p₂ = ?;            V₂ =  16.0 L

Calculations:

[tex]\begin{array}{rcl}p_{1}V_{1} & = & p_{2}V_{2}\\\text{565 torr} \times \text{24.0 L} & = & p_{2} \times \text{16.0 L}\\\text{13 560 torr} & = & 16.0p_{2}\\p_{2} & = & \dfrac{\text{13 560 torr}}{16.0}\\\\& = &\textbf{848 torr}\\\end{array}\\\text{The final pressure of the gas is $\large \boxed{\textbf{848 torr}}$}[/tex]

The element which can not loose electron easily and having electronagtive character is called non-metal it has following property-1. it can not conduct heat and electricity1. it is netiher ductile not malleable3. it is not lsuturous and also not sonorous

Answer:

Non-metals are the elements which form negative ions by accepting or gaining electrons. Non-metals usually have 4, 5, 6 or 7 electrons in their outermost shell. Non-metals are those which lack all the metallic attributes. They are good insulators of heat and electricity. They are mostly gases and sometimes liquid.

Answer:

A. Saturated acids  -  1. myristic acid, 4. palmitic acid

B. Monounsaturated acids  - 2. oleic acid

C. Polyunsaturated acids -  3. linoleic acid

Explanation:

Saturated fatty acids are the fats combined together with a single bond and no double or triple bond while unsaturated fatty acids are the fats having a double or triple bond between them.

Monosaturated acids have only one double or triple bond while polyunsaturated acids have more than one double or triple bond.

So, an appropriate match of given acids are:

A. Saturated acids  - Myristic acid (CH3(CH2)12COOH) and Palmitic acid (CH3(CH2)14COOH) dont have any double or triple bonds.

B. Monounsaturated acids  - Oleic acid (CH3(CH2)7CH=CH(CH 2)7COOH) have only one double bond.

C. Polyunsaturated acids - Linoleic acid (HOC–7CH=CH–CH 2–CH=CH–3H) has two double bonds.

Hence, the correct answer is:

A. Saturated acids  -  1. myristic acid, 4. palmitic acid

B. Monounsaturated acids  - 2. oleic acid

C. Polyunsaturated acids -  3. linoleic acid

Answer:

Pb + 2H2O --> PbO2 + 2H2

Explanation:

Products:

Solid metal; PbO2

Hydrogen; H

Reactants:

Metal; Pb

Steam; H2O

Reactants --> Products

Pb + H2O --> PbO2 + H2

Upon balancing we have;

Pb + 2H2O --> PbO2 + 2H2

Answer:

[tex][N_2]_{eq}=[H_2]_{eq}=0.09899M[/tex]

[tex][NO]_{eq}=0.00202M[/tex]

Explanation:

Hello,

In this case, for the given chemical reaction:

[tex]2NO\rightleftharpoons N_2+O_2[/tex]

We know the equilibrium constant and equilibrium expression:

[tex]Kc=2.4x10^3=\frac{[N_2][O_2]}{[NO]^2}[/tex]

That in terms of the reaction extent [tex]x[/tex] (ICE procedure) we can write:

[tex]2.4x10^3=\frac{x*x}{(0.2M-2*x)^2}[/tex]

In such a way, solving for [tex]x[/tex] by using a quadratic equation or solver, we obtain:

[tex]x_1=0.09899M\\x_2=0.1010M[/tex]

Clearly the solution is 0.09899M since the other value will result in a negative equilibrium concentration of NO. In such a way, the equilibrium concentrations of all the species are:

[tex][N_2]_{eq}=[H_2]_{eq}=x=0.09899M[/tex]

[tex][NO]_{eq}=0.2M-2*0.09899M=0.00202M[/tex]

Regards.

The given question is incomplete, the complete question is:

An atom of 122In has a mass of 121.910280 amu. Calculate the binding energy in MeV per atom. Use the masses: mass of 1H atom = 1.007825 amu mass of a neutron = 1.008665 amu 1 amu = 931.5 MeV

Answer:

The correct answer is 1029.95 MeV.

Explanation:

Based on the given information,  

The mass of proton is 1.007825, the mass of neutron is 1.008665.  

The atomic number of Indium is 49, therefore, the number of neutrons will be, 122-49 = 73.  

Now the calculated mass will be,  

= 49 * 1.007825 + 73 * 1.008665

= 49.383425 + 73.632545

= 123.01597

The mass defect is calculated by subtracting the actual mas from calculated mass,  

Mass defect = Actual mass - Calculated mass

= 121.910280 - 123.01597

= -1.10569 amu

Now the binding energy will be,  

Binding energy = 1.10569 * 931.5 MeV

= 1029.95 MeV

Answer:

[tex]x_{et}=0.6068[/tex]

Explanation:

Hello,

In this case, since the mole fraction of a compound, in this case ethanol, in a binary mixture, in this constituted by both water and ethanol, is mathematically defined as follows:

[tex]x_{et}=\frac{n_{et}}{n_{et}+n_{w}}[/tex]

Whereas [tex]n[/tex] accounts for the moles in the solution for each species, we must first compute the moles of both ethanol (density: 0.789 g/mL and molar mass: 46.07 g/mol) and water (density: 1g/mL and molar mass: 18.02 g/mol)

[tex]n_{et}=10.00mL\ et*\frac{0.789g\ et}{mL\ et} *\frac{1mol\ et}{46.07g\ et}=0.1713mol\ et\\ \\n_w=2.00mL\ w*\frac{1g\ w}{mL\ w} *\frac{1mol\ w}{18.02g\ w}=0.1110mol\ w[/tex]

Therefore, the mole fraction turns out:

[tex]x_{et}=\frac{0.1713mol}{0.1713mol+0.1110mol}\\\\x_{et}=0.6068[/tex]

Best regards.

Explanation:

The spontaneity of a system is deduced by the sign of the gibbs free energy value. If it is negative, it means the process / reaction is spontaneous however a positive value indicates the such process is not spontaneous.

Gibbs free energy, enthalpy and entropy are related by the following equation;

ΔG = ΔH - TΔS

A positive value of enthalpy, H and entropy, S means that G would always be a negative value at all temperatures.

Answer:

shape

volume

Hope this helps! （づ￣3￣）づ╭❤～

Explanation:

Answer:

4.84g of FeO is the theoretical yield

Explanation:

The Iron, Fe(s), reacts with oxygen, O₂(g), producing Iron (II) oxide, as follows:

2Fe(s) + O₂(g) → 2FeO

Theoretical yield is the yield of a reaction in which you assume the 100% of reactants is converted in products.

To find theoretical yield we need to find moles of Iron, and, knowing 2 moles of Fe produce 2 moles of FeO (Ratio 1:1), we can find theoretical yield of FeO as follows:

Moles Fe (Molar mass: 55.845g/mol)

Using the molar mass of the compound we can convert grams to moles, thus:

3.76g Fe × (1mol / 55.845g) = 0.0673 moles of Fe

Moles and mass of FeO

As there are in reaction 0.0673 moles Fe, assuming a theoretical yield (And as ratio of the reaction is 1:1), you will obtain 0.0673 moles of FeO.

Theoretical yield is given in grams, As molar mass of FeO is 71.844g/mol, theoretical yield of the reaction is:

0.0673 moles FeO × (71.844g / mol) =

Answer:

H₂O

Explanation:

The empirical formular of the compound is obtained using the following steps;

Step 1: Divide the percentage composition by the atomic mass

Hydrogen = 11.21 / 1 = 11.21

Oxygen = 88.79  / 16 = 5.55

Step 2: Divide by the lowest number

Hydrogen  = 11.21 / 5.55 = 2.02 ≈ 2

Oxygen = 5.55 / 5.55 = 1

This means the ratio of the elements is 2 : 1

The empirical formular (simplest formular of a compound) of the compound is;

H₂O

Answer:Empirical formula ======== H₂O    

Explanation:The empirical formula of a compound shows the whole number ratio for  each atom in a compound.

To find empirical formula. we follow the below steps

The total mass of the compound here  is 100 grams, that is (11.21% of hydrogen + 88.79% of oxygen) we can then  assume 11.21 grams  of hydrogen and 88.79grams of oxygen

                                          Hydrogen                   Oxygen

1.composition by mass    11.21                              88.79

molecular weight              1.007g/mol               15.990g/mol

2.Divide composition by mass  11.21/1.007            88.79/15.99    

by each molecular weight to get 11.13                            5.553

no of moles

3 Divide by the least number of moles

to get atomic ratio                       11.13/5.553          5.553/5.553

                                                         2.004                           1.00

4.Convert  to whole numbers             2                                 1

Empirical formula ======== H₂O    

Answer:

0.423 m.

Explanation:

The following data were obtained from the question:

Mass of glycine (NH2CH2COOH) = 141.5 g

Mass of water = 4.456 kg

Molality =.?

Next, we shall determine the number of mole in 141.5 g of glycine (NH2CH2COOH.

This is illustrated below:

Mass of glycine (NH2CH2COOH) = 141.5 g

Molar mass of glycine (NH2CH2COOH) = 14 + (2x1) + 12 + (2x1) + 12 + 16 + 16 + 1 = 75 g/mol

Mole of glycine (NH2CH2COOH) =.?

Mole = mass /Molar mass

Mole of glycine (NH2CH2COOH) = 141.5/75

Mole of glycine (NH2CH2COOH) = 1.887 moles

Finally, we shall determine the molality of the solution as follow:

Molality is simply defined as the mole of solute per kilogram of water. Mathematically it is expressed as:

Molality = mole / mass (kg) of water

With the above formula, we can obtain the molality of the solution as follow:

Mole of glycine (NH2CH2COOH) = 1.887 moles

Mass of water = 4.456 kg

Molality =.?

Molality = mole /mass (kg) of water

Molality =1.887/4.456

Molality = 0.423 m

Therefore, the molality of the solution is 0.423 m

Answer:

C) formaldehyde, H2C=O.

Explanation:

Hello,

In this case, given that the hydrogen bondings are known as partial intermolecular interactions between a lone pair on an electron rich donor atom, particularly oxygen, and the antibonding molecular orbital of a bond between hydrogen and a more electronegative atom or group. Thus, among the options, C) formaldehyde, H2C=O, will exhibit hydrogen bonding since the lone pair of electrons of the oxygen at the carbonyl group, are able to interact with hydrogen (in the form of water).

Best regards.

Answer:

Explanation:

Fe2+ Has 4 unpaired electrons.

By method of elimination;

Option A: Ni2+ has two unpaired electrons. so this option is wrong.

Option B: There are 5 unpaired electrons in the Fe3+ ion. so this option is wrong.

Option C: There are 4 unpaired electrons in the Cr2+ ion. so this option is correct.

Option D: There are 5 unpaired electrons in the Mn2+ ion. so this option is wrong.

Option E: There are 3 unpaired electrons in the Co2+ ion. so this option is wrong.