The mole is a counting number that allows scientists to describe how individual molecules and atoms react. If one mole of atoms or molecules is equal to 6.022 x 10^32 atoms or molecules, how many molecules are in 23.45 g sample of copper (II) hydroxide, Cu(OH)2? Express your answer to the correct number of significant figures. (MM of Cu(OH)2 is 97.562g/mol. Be sure to show all steps completed to arrive at the answer.

Answer:

²³⁴₉₀Th --> ²³⁴₉₁Pa + ⁰₋₁e

Explanation:

thorium-234 = ²³⁴₉₀Th

beta decay = ⁰₋₁e

protactinium-234 = ²³⁴₉₁Pa

The balanced nuclear equation is given as;

²³⁴₉₀Th --> ²³⁴₉₁Pa + ⁰₋₁e

Answer:

72.8 % (But verify explanation).

Explanation:

Hello,

In this case, with the following obtained results, the percent error is computed as follows:

Volume of vinegar= 7.0 mL

Volume of NaOH= (7+6.6+6.4)/3= 6.7 mL

Used concentration of NaOH= 1.5M

Concentration of acetic acid= (concentration of NaOH*volume of NaOH)/volume of vinegar= (6.7mL*1.5M)/7.0M= 1.44M

Assuming we have 100 mL (0.100L) of vinegar, moles of acetic acid in vinegar = 1.44M x 0.100 L= 0.144 mol

Mass of acetic acid in 100g of vinegar = 0.144 mol x 60.0g/mol= 8.64 g

% of acetic acid in vinegar=8.64 %

% error in percentage of acetic acid = [(8.64% - 5.0%)/5.0] x 100=72.8 %

Clearly, this result depend on your own measurements, anyway, you can change any value wherever you need it.

Regards.

Answer:

Explan ionization energy, atomic radius, and electron affinityation:

This question most likely has answer choices. The possible answer choices are as followed:

The answers are Ionic radii tend to increase down a group, Cationic radii tend to decrease across a period, and Ionic radii increase when switching from cations to anions in a period (1st, 4th, and 5th options).

Answer:

D. Reduction takes place at the cathode, which is negatively charged.

Explanation:

In an electrolytic cell there are two electrodes; the cathode and the anode. The anode is the positive electrode while the cathode is the negative electrode. Oxidation occurs at the anode while reduction occurs at the cathode.

At the anode, species give up electrons and become positively charged ions while at the cathode species accept electrons and become reduced.

Answer:

1 L

Explanation:

ppm means parts per million. Generally the relationship between mass and litre is given as;

1 ppm = 1 mg/L

This means that 1 ppm is equivalent to 1 mg of a substance dissolved in 1 L of water.

Answer:

Number of mole in Oxygen = 2.24 mol

Explanation:

Given:

Amount of carbon dioxide (CO₂) = 49.2 gram

Find:

Number of moles in Oxygen

Computation:

Molecular weight of CO₂ = 44 gram (Approx)

Number of mole in CO₂ = 49.2 / 44

Number of mole in CO₂ = 1.11818182 mol

CO₂ has 2 mole of Oxygen,

So,

Number of mole in Oxygen = 2 × 1.11818182

Number of mole in Oxygen = 2.23636364

Number of mole in Oxygen = 2.24 mol

Answer:

[tex]H_2O[/tex]

Explanation: Research has proven that ;

Water is a Polar Covalent Molecule

It consists of 2 Hydrogen molecules bonded to one Oxygen molecule and  the two hydrogen atoms are not evenly distributed around the oxygen atom.

Answer:

CH3CH=NH2+>CH3CH2NH3 +

Explanation:

There are certain structural features that determine the stability of cationic species. These features that lead to the stability and higher acid strength of cations are those features that stabilize the cation.

CH3CH=NH2+ is more acidic than CH3CH2NH3 + owing to the fact that CH3CH=NH2+ contains a double bond in close proximity with the hydrogen that can be lost as a proton. Electron withdrawal by the double bond (greater s character) makes it easier for this hydrogen to be lost as a proton compared to CH3CH2NH3 +.

Answer:

[tex]Ksp=2.59x10^{-3}[/tex]

Explanation:

Hello,

In this case, given the 0.0990 moles of the salt are soluble in 1.00 L of water only, we can infer that the molar solubility is 0.099 M. Next, since the dissociation of the salt is:

[tex]AB_3\rightleftharpoons A^{3+}+3B^-[/tex]

The concentrations of the A and B ions in the solution are:

[tex][A]=0.099 \frac{molAB_3}{L}*\frac{1molA}{1molAB_3} =0.0099M[/tex]

[tex][B]=0.099 \frac{molAB_3}{L}*\frac{3molB}{1molAB_3} =0.000.297M[/tex]

Then, as the solubility product is defined as:

[tex]Ksp=[A][B]^3[/tex]

Due to the given dissociation, it turns out:

[tex]Ksp=[0.099M][0.297M]^3\\\\Ksp=2.59x10^{-3}[/tex]

Regards.

Answer:

d. Oxidation and reduction

Explanation:

For this question we have to remember the definition of each type of reaction:

-) Hydrogenation

In this reaction, we have the addition of hydrogen to a molecule. Usually, an alkene or alkyne. In the example, molecular hydrogen is added to a double bond to produce an alkane.

-) Alkylation

In this reaction, we have the addition of a chain of carbon to another molecule. In the example, an ethyl group is added to a benzene ring.

-) Hydrolysis

In this reaction, we have the breaking of a bond by the action of water. In the example, a water molecule can break the C-O bond in the ester molecule.

-) Halogenation

In this reaction, we have the addition of a halogen (atoms on the VIIIA group). In the example, "Cl" is added to the butene.

-) Ammoniation

In this reaction, we have the addition of the ammonium ion ([tex]NH_4^+[/tex]). In the example, the ammonium ion is added to an acid.

-) Oxidation and reduction

In this reaction, we have opposite reactions. The oxidation is the loss of electrons and the reduction is the gain of electrons. For example:

[tex]Ag^+~+~e^-~->~Ag[/tex] Reduction

[tex]Al~->~Al^+^3~+~3e^-[/tex] Oxidation

Answer:

- Weight 333.3 grams of iodine.

- Measure 500 mL of water.

- Vigorously mix the resulting solution.

Explanation:

Hello,

In this case, since 500 mL of a 40% (w/v) aqueous solution iodine is required, we can compute the required mass of iodine by defining the given mass-volume percent:

[tex]\% w/v=\frac{m_{iodine}}{m_{solution}} *100%=\frac{m_{iodine}}{m_{water}+m_{iodine}} *100%[/tex]

In such a way, we need to find mass of iodine, which is computed as:

[tex]m_{iodine}=\frac{\%w/v*m_{water}}{100w/v-\%} \\\\m_{iodine}=\frac{40*500}{100-40}\\ \\m_{iodine}=333.3g\\[/tex]

Thereby, the procedure will be:

- Weight 333.3 grams of iodine.

- Measure 500 mL of water.

- Vigorously mix the resulting solution.

Best regards.

Answer:

0.101 M

Explanation:

Step 1: Given data

Step 2: Calculate [A]

For a second-order reaction, we can calculate [A] using the following expression.

1/[A] = 1/[A]₀ + k × t

1/[A] = 1/0.250 M + 0.117 M⁻¹.min⁻¹ × 50.7 min

[A] = 0.101 M

Answer:

The answer is

Explanation:

The Ka of an acid when given the pH and concentration can be found by

where

c is the concentration of the acid

From the question

pH = 5.82

c = 0.010 M

Substitute the values into the above formula and solve for Ka

We have

Multiply through by - 2

Find antilog of both sides

We have the final answer as

Hope this helps you

Answer:

A double bond is formed when two pairs of electrons are shared between the two participating atoms. It is represented by two dashes (=). It is represented by two dashes (=). Double covalent bonds are much stronger than a single bond, but they are less stable

Explanation:

Answer:

ΔT = 2.28°C

Explanation:

Heat, H = 75.4J

Number of moles = 0.25 mol

Specific heat capacity, c = 0.861 J/g·°C

Change in temperature, ΔT = ?

These quantities are related by the following equation;

H = mc ΔT

Mass, m = Number of moles * Molar mass

m = 0.25mol * 153.82 g/mol

m = 38.455g

S back to the equation;

H = mc ΔT

Substituting the values;

75.4 = 38.455 * 0.861 * ΔT

ΔT = 75.4 /  33.11

ΔT = 2.28°C

The change in temperature is 2.28 °C

First, we will determine the mass of CCl₄ absorbed

From the given information,

Number of moles of CCl₄ absorbed = 0.25 mol

Using the formula

Mass = Number of moles × Molar mass

Molar mass of CCl₄ = 153.82 g/mol

∴ Mass of CCl₄ absorbed = 0.25 × 153.82

Mass of CCl₄ absorbed = 38.455 g

Now, using the formula

Q = mcΔT

Where Q is the quantity of heat

m is the mass

c is the specific heat of substance

and ΔT is the change in temperature

From the given information

Q = 75.4 J

c = 0.861 J/g.°C

Putting the parameters into the formula, we get  

75.4 = 38.455 × 0.861 ×ΔT

75.4 = 33.109755 × ΔT

∴ ΔT = 75.4 ÷ 33.109755

ΔT = 2.28 °C

Hence, the change in temperature is 2.28 °C

Learn more here: https://brainly.com/question/13439286

Answer:

Siδ⁺ -- Pδ⁻⁻

Clδ⁻⁻ -- Pδ⁺

Siδ⁺ -- Clδ⁻⁻

Of the mentioned bonds the most polar bond is Si -- Cl

The polarity of the bond primarily relies upon the electronegativity difference between the two atoms that forms the bond. Therefore, if the electronegativity difference between the two atoms that forms the bond is more the bond will be more polar, and if it is less then the bond will be less polar. The electronegativity of the atoms mentioned is Si = 1.8 , P = 2.1 and Cl = 3.00.  

Therefore, the Si - Cl atoms exhibit more electronegativity difference, thus, the Si - Cl bond will be the most polar bond.  

Answer:

Molar solubility is 1.12x10⁻⁴M

Explanation:

The dissolution of magnesium hydroxide is:

Mg(OH)₂(s) ⇄ Mg²⁺ + 2OH⁻

The molar solubility represents the moles of the solid that the solution can dissolve, that could be written as:

Mg(OH)₂(s) ⇄ X + 2X

Where X is solubility.

If you obtained a [OH⁻] = 2.24x10⁻⁴M and you know [OH⁻] = 2X:

2X = 2.24x10⁻⁴M

X = 2.24x10⁻⁴M/2

X =1.12x10⁻⁴M

Answer:

THE ENTHALPY CHANGE IN KJ/MOLE IS +114 KJ/MOLE.

Explanation:

Heat = mass * specific heat capacity * temperature rise

Total volume = 100 + 50 = 150 mL

Total mass = density * volume

Total mass = 1 * 150 mL = 150 g

So therefore, the heat evolved during the reaction is:

Heat = 150 * 4.18 * ( 31.4 - 22.3)

Heat = 150 * 4.18 * 9.1

Heat = 5705.7 J

Equation for the reaction:

2 NaOH(aq) + H2SO4(aq) → Na2SO4(aq) + 2 H2O(l)  

From the equation, 2 moles of NaOH reacts with 1 mole of H2SO4 to produce 1 mole of Na2SO4 and 2 moles of water

50 mL of 1 M of H2SO4 contains

50 * 1 / 1000 mole of acid

= 0.05 mole of acid

The production of 1 mole of water evolved 5705.7 J of heat and hence the enthalpy changein kJ per mole will be:

0.05 mole of H2SO4 produces 5705.7 J of heat

1 mole of H2SO4 will produce 5705.7 / 0.05 J

= 114,114 J / mole

In kj/mole = 114 kJ/mole.

Hence, the enthalpy change of the reaction in kJ /mole is +114 kJ/mole.

Answer:

0.9718M

Explanation:

Rate constant, k =  0.255 M-1s-1

time, t = 8.00 s

Initial concentration, [A]o = 1.33 M

Final concentration, [A] = ?

These quantities are represented by the equation;

1 / [A] = 1 / [A]o + kt

1 / [A] = 1 /1.33 + (0.255 * 8)

1 / [A] = 0.7519 + 2.04

[A] = 1 / 2.7919 = 0.3582 M

How much of NO2 decomposed is obtained from the change in concentration;

Change in concentration = Initial - Final

Change = 1.33 - 0.3582 = 0.9718M

Answer: The calculated molar enthalpy change of reaction for his second trial was -108 kJ.

Explanation:-

Molarity of a solution is defined as the number of moles of solute dissolved per Liter of the solution.

[tex]\text{no of moles}={\text{Molarity}\times {\text{Volume in L}}[/tex]

Thus [tex]\text{no of moles}of HCl={1.0M}\times {0.05L}=0.05moles[/tex]

Thus [tex]\text{no of moles}of NaOH={1.0M}\times {0.05L}=0.05moles[/tex]

[tex]HCl(aq)+NaOH(aq)\rightarrow NaCl(aq)+H_2O(l)[/tex]

Given for second trial:

[tex]\text{no of moles}of HCl={1.0M}\times {0.1L}=0.1moles[/tex]

[tex]\text{no of moles}of NaOH={1.0M}\times {0.1L}=0.1moles[/tex]

0.05 moles of [tex]HCl[/tex] reacts with 0.05 moles of [tex]NaOH[/tex] to release  heat = 54 kJ

0.1 moles of [tex]HCl[/tex] reacts with 0.05 moles of [tex]NaOH[/tex] to release  heat  =[tex]\frac{54}{0.05}\times 0.1=108kJ[/tex]

Thus calculated molar enthalpy change of reaction for his second trial was -108 kJ.

Answer:

1. the siren has a lower pitch to Jane

2. the siren has a higher pitch to John

3. sound different due to moving away from Jane making the sound wave lengths longer and moving toward John making the wave lengths shorter

Explanation:

The Doppler effect expresses that sound is comparative with the spectator or observer. This is demonstrated valid by the model given with Jane and John. To one individual it could sound low and to someone else it could sound high, in light of where they are tuning in from. To John, the police alarm playing is a higher pitch. Be that as it may, to Jane this equivalent alarm is a totally extraordinary pitch and is heard lower than in comparison to the john.

This is a prime case of the Doppler Effect. They sound distinctive on the grounds that the sound is moving far from Jane making the sound frequencies longer and it is advancing toward John making the frequencies shorter. This impacts how the sound is heard by the human ear.

Answer:

37.8 L OF CARBON MONOXIDE IS REQUIRED TO PRODUCE 18.9 L OF NITROGEN.

Explanation:

Equation for the reaction:

2 CO + 2 NO ------> N2 + 2 CO2

2 moles of carbon monoxide reacts with 2 moles of NO to form 1 mole of nitrogen

At standard temperature and pressure, 1 mole of a gas contains 22.4 dm3 volume.

So therefore, we can say:

2 * 22.4 L of CO produces  22.4 L of N2

44.8 L of CO produces 22.4 L of N2

Since, 18.9 L of Nitrogen is produced, the volume of CO needed is:

44.8 L of CO = 22.4 L of N

x L = 18.9 L

x L = 18.9 * 44.8 / 22.4

x L = 18.9 * 2

x = 37.8 L

The volume of Carbon monoxide required to produce 18.9 L of N2 is 37.8 L

Answer:

37.8

Explanation:

Answer:

the acid strength is the order of [tex]\mathsf{HF _{(aq)} }[/tex] > [tex]\mathsf{C_6H_5COOH _{(aq)} }[/tex] > [tex]\mathsf{C_6H_5OH _{(aq)} }[/tex]

Explanation:

Given that :

a . [tex]\mathsf{C_6H_5COO^- _{(aq)} + C_6H_5OH _{(aq)} \to C_6H_5COOH _{(aq)} + C_6H_5O^- _{(aq)}}[/tex]

b.  [tex]\mathsf{ F^- _{(aq)} + C_6H_5OH _{(aq)} \to C_6H_5O^- _{(aq)} + HF _{(aq)} }[/tex]

c.  [tex]\mathsf{C_6H_5COOH _{(aq)} + F^- _{(aq)} \to HF _{(aq)} + C_6H_5COO^- _{(aq)} }[/tex]

Acid strength is the ability of an acid  to dissociate into a proton and an anion. Take for instance.

HA  ↔ H⁺ + A⁻

The  acid strength of the following compounds above are:

[tex]\mathsf{C_6H_5OH _{(aq)} }[/tex] = 1.00 × 10⁻¹⁰

[tex]\mathsf{HF _{(aq)} }[/tex] = 6.6 × 10⁻⁴

[tex]\mathsf{C_6H_5COOH _{(aq)} }[/tex] = 6.3 × 10⁻⁵

As the acid dissociation constant increases the relative acid strength also increases.

From above, the acid strength is the order of [tex]\mathsf{HF _{(aq)} }[/tex] > [tex]\mathsf{C_6H_5COOH _{(aq)} }[/tex] > [tex]\mathsf{C_6H_5OH _{(aq)} }[/tex]

[tex]\mathsf{C_6H_5COO^- }[/tex], [tex]\mathsf{C_6H_5O^- _{(aq)}}[/tex] and F⁻ are Bronsted- Lowry acid

Bronsted- Lowry acid are molecule or ion that have the ability to donate a proton.

Answer:

The answer is a.

Explanation:

Most of the costs associated with using renewable resources are due to overuse of the resources.

Most of the costs associated with using renewable resources are due to overuse of resources.

Renewable resources are those resources which will be generated naturally and continously from the nature and these are also inexhaustible means non ended.

As from the definition it is clear that we can reuse or will use again and again these types of resources, that's why cost associated with these renewable resources are high.

Hence, overuse of resouces is one of the reason.

To know more about renewable resorces, visit the below link:
https://brainly.com/question/79953

Answer and Explanation:

a. The equation of K of this reaction is shown below:-

3 A + 5 B + 4 C↔5 D + 7 E + F

[tex]K = \frac{(D)^5 (E)^7 (F)}{(A)^3 (B)^5 (C)^4}[/tex]

b. The moles of compound F is shown below:-

3 A + 5 B + 4 C↔5 D + 7 E + F

               2 moles

Now, the mole of produced is

[tex]= \frac{1}{4} \times \ moles\ of\ c[/tex]

Now, we will the value of c by using the above equation

[tex]= \frac{1}{4} \times 2[/tex]

After solving the above equation we will get

0.5 moles

Answer:

Companies know that people will be willing to spend more to get an in-demand product.

Explanation:

When a product is really in demand, many customers are willing to part with more money order to purchase the product, as a result of that, many companies may take advantage of the increasing demand for the product to hike it's price.

Hence, the increase in price may not really have a negative impact on the quantity demanded because the demand for the product is high and customers are willing to spend more money in order to purchase an in-demand product, hence the answer above.

Prices increase when demand is high because companies know that people will be willing to spend more to get in-demand products.

Prices generally increase with higher demand for goods because the higher demand creates pressure for the supply to meet up.

Manufacturing companies can either increase their production to meet up with demand at the same price or capitalize on the situation to make more money by increasing the price without increasing the supply.

Since there is a buying pressure on the product in the market already, people would still be open to buying even at higher prices.

More on demand and prices can be found here: https://brainly.com/question/16170198?referrer=searchResults

Answer:

A. Rank the following substances in order of decreasing standard molar entropy (S∘).

Rank the gases from largest to smallest standard molar entropy

I2(g)>Br2(g)>Cl2(g)>F2(g)

B. Rank the gases from largest to smallest standard molar entropy. To rank items as equivalent, overlap them.

H2O2(g)>H2S(g) >H2O(g)

C. Rank the gases from largest to smallest standard molar entropy. To rank items as equivalent, overlap them.

C(s, amorphous) >C(s, graphite)>C(s, diamond)

Explanation:

Hello,

In this case, we can apply the following principles to explain the order:

- The greater the molar mass, the larger the standard molar entropy.

- The greater the molar mass and the structural complexity, the larger the standard molar entropy.

- The greater the structural complexity, the larger the standard molar entropy.

A. Rank the following substances in order of decreasing standard molar entropy (S∘).

Rank the gases from largest to smallest standard molar entropy

I2(g)>Br2(g)>Cl2(g)>F2(g)

This is due to the fact that the greater the molar mass, the larger the standard molar entropy.

B. Rank the gases from largest to smallest standard molar entropy. To rank items as equivalent, overlap them.

H2O2(g)>H2S(g) >H2O(g)

This is due to the fact that the greater the molar mass and the structural complexity, the larger the standard molar entropy as the hydrogen peroxide has four bonds and weights 34 g/mol as well as hydrogen sulfide that has two bonds only.

C. Rank the gases from largest to smallest standard molar entropy. To rank items as equivalent, overlap them.

C(s, amorphous) >C(s, graphite)>C(s, diamond)

Since the molecular complexity is greater in the amorphous carbon (messy arrangement), mid in the graphite and lower in the diamond (well organized).

Regards.

from

1moles=iatom

Mole=mass÷avogardos

Where

Avogadro's= 6.02×10²³

So moles = 65.0÷6.02×10²³

Atoms of zinc = 391.6 ×10²³

The number of atoms present in the given mass of Zinc that is 65.0gm is [tex]5.99\times10^{ 23}[/tex].

Atoms are the basic building blocks of matter. They are the smallest units of an element that retain the chemical properties of that element.

Now, to determine the number of atoms in a given number of moles, we can use Avogadro's number, which is approximately  [tex]6.022 \times10^{23}[/tex]atoms per mole.

First, we calculate the number of moles of zinc in 65.0g by dividing the given mass by the molar mass of zinc. The molar mass of zinc (Zn) is 65.38 g/mol.

Number of moles = Mass / Molar mass

Number of moles = 65.0g / 65.38 g/mol ≈ 0.9942 mol

Next, multiply the number of moles by Avogadro's number to find the number of atoms.

Number of atoms =[tex]Number of moles \times Avogadro's number[/tex]

Number of atoms = [tex]0.9942[/tex]mol × [tex]6.022 \times10^{23}[/tex] atoms/mol

Therefore, approximately [tex]5.99\times10^{ 23}[/tex] atoms are present in 65.0g of zinc.

Learn more about atoms here:

https://brainly.com/question/1566330

#SPJ2

Answer:

c

Explanation:

How many moles of gold are equivalent to 1.204 × 1024 atoms?

0.2

0.5

2

5

C) 2 Is the correct answer, I took the test and it was correct.

According to the concept of Avogadro's number, there are 2 moles of gold which are equivalent to 1.204×10²⁴ atoms.

Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.

It has a SI unit of reciprocal mole whose numeric value is expressed in reciprocal mole which is a dimensionless number and is called as Avogadro's constant.It relates the volume of a substance with it's average volume occupied by one of it's particles .

According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.

Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number.Number of moles=number of atoms/Avogadro's number=1.204×10²⁴ /6.023×10²³=1.999≅2

Thus, there are 2 moles of gold which are equivalent to 1.204×10²⁴ atoms.

Learn more about Avogadro's number,here:

https://brainly.com/question/11907018

#SPJ3