Answer:
The rms current in the circuit is 3.513 A
Explanation:
Given;
angular frequency of the inductor, ω = 363 rad/s
maximum voltage of the inductive AC, V₀ = 169 V
Inductance of the inductor, L = 0.0937 H
Inductive reactance is given by;
[tex]X_L = 2\pi f L= \omega L[/tex]
[tex]X_L = 363 *0.0937\\\\X_L = 34.0131 \ ohms[/tex]
The rms voltage is given by;
[tex]V_{rms} = \frac{V_o}{\sqrt{2} } \\\\V_{rms} =\frac{169}{\sqrt{2} } \\\\V_{rms} = 119.5 \ V[/tex]
The rms current in the circuit is given by;
[tex]I_{rms} = \frac{V_{rms}}{X_L} \\\\I_{rms} = \frac{119.5}{34.0131} \\\\I_{rms} = 3.513 \ A[/tex]
Therefore, the rms current in the circuit is 3.513 A
If a sample emits 2000 counts per second when the detector is 1 meter from the sample, how many counts per second would be observed when the detector is 3 meters from the sample?
Using the sample in above question how many counts per second would be observed when the detector is 10 meters away from the sample?
Answer:
At 3 meter distance, the per-second count is 222.22 and at a 10 meter distance, the per-second count is 20.
Explanation:
The number of particles (N) counts are inversely proportional to the distance between the source and the detector.
By using the below formula we can find the number of counts.
[tex]N2 = \frac{(D1)^2}{(D2)^2} \times N1 \\N1 = 2000 \\D 1 = 1 \ meter \\D2 = 3 \\[/tex]
The number of count per second, when the distance is 3 meters.
[tex]= \frac{1}{3^2} \times 2000 \\= 222.22[/tex]
Number of count per second when the distance is 10 meters.
[tex]= \frac{1}{10^2} \times 2000 \\= 20[/tex]
A rod of length L is hinged at one end. The moment of inertia as the rod rotates around that hinge is ML2/3. Suppose a 2.50 m rod with a mass of 3.00 kg is hinged at one end and is held in a horizontal position. The rod is released as the free end is allowed to fall. What is the angular acceleration as it is released?
Answer:
6 rad/s²
Explanation:
Sum the torques about the hinge.
∑τ = Iα
mg(L/2) = mL²/3 α
g/2 = L/3 α
α = 3g/(2L)
α = 3 (10 m/s²) / (2 × 2.50 m)
α = 6 rad/s²
You want to create a spotlight that will shine a bright beam of light with all of the light rays parallel to each other. You have a large concave spherical mirror and a small lightbulb. Where should you place the lightbulb?
a. at the point, because all rays bouncing off the mirror will be parallel.
b. at the focal point of the mirror
c. at the radius of curvature of the mirror
d. none of the above, you cant make parallel rays wilth a concave mirror
Answer:
Explanation:
Concave mirrors is otherwise known as converging mirrors: These are mirrors that are caved inwards (reflecting surface is on the outside curved part). It is called a converging mirror due to the fact that light converges to a point when it strikes and reflects from the surface of the mirror. This type of mirror is used to focus light; parallel rays that are directed towards it will be concentrated to a point.
For a concave mirror to reflect light with properties that are the same as a spotlight (directed light rays parallel to each other), one has to consider its property to gather light to a point after reflecting. Meaning that, we can achieve the spotlight by locatng the point where the rays will be parallel, this point is called the focal point.
Therefore, the light bulb should be placed at the focal point of the mirror.
Mary had 21 plants when she went on vacation. When she got back , she only had 14 left alive. What is the percent of decrease in the number of plants?
Explanation:
Mary had 21 plants when she went on vacation.
When she got back, she only had 14 left alive.
We need to find the percent decrease in the number of plants.
Decrease in plants = 21 - 14 = 7
Percent decrease is given by :
[tex]\%=\dfrac{7}{21}\times 100\\\\\%=33.33\%[/tex]
So, there is 33% pf decrease in the number of plants.
A dentist uses a concave mirror (focal length 2 cm) to examine some teeth. If the distance from the object to the mirror is 1 cm, what is the magnification of the tooth
Answer: 2
Explanation:
1/2=1/1 +1/x
x=-2
magnification= 2/1
magnification=2
Two identical trucks have mass 5500 kg when empty, and the maximum permissible load for each is 8000 kg. The first truck, carrying a 3900 kg, is at rest. The second truck plows into it at 64 km/h, and the pair moves away at 44 km/h. As an expert witnes, you're asked to determine whether the second truck was overloaded. What do you report? Yes the truck is overloaded, or no, the truck is not overloaded?
Answer:
no, the truck is not overloaded
Explanation:
The computation is shown below;
Let us assume the mass of the loan in the second truck be M
So, the equation is as follows
{(Mass + M) × second truck × 1000 ÷ 3,600} = {(Mass + M + mass + first truck) × Pair moves away × 1,000 ÷ 3,600}
{(5500 + M) × 64 × 1,000 ÷ 3,600 = {(5,500 + M + 5,500 + 3,900) × 44 × 1,000 ÷ 3,600}
(5500 + M) × 64 = (14,900 + M) × 44
352,000 + 64 M = 655,600 + 44 M
After solving this
M = 15,180 kg
Therefore the second truck is not overloaded
Describe how you expect the waveform and the sound you hear changes when you hit the tuning fork harder.
Answer:
In a tuning fork, two basic qualities of sound are considered, they are
1) The pitch of the waveform: This pitch depends on the frequency of the wave generated by hitting the tuning fork.
2) The loudness of the waveform: This loudness depends on the intensity of the wave generated by hitting the tuning fork.
Hitting the tuning fork harder will make it vibrate faster, increasing the number of vibrations per second. The number of vibration per second is proportional to the frequency, so hitting the tuning fork harder increase the frequency. From the explanation on the frequency above, we can say that by increasing the frequency the pitch of the tuning fork also increases.
Also, hitting the tuning fork harder also increases the intensity of the wave generated, since the fork now vibrates faster. This increases the loudness of the tuning fork.
A small wave pulse and a large wave pulse approach each other on a string; the large pulse is moving to the right.
Sometime after the pulses have met and passed each other, which of the following statements is correct? (More than one answer may be correct)
- the large pulse continues moving to the right
- the large pulse continues unchanged, moving to the right
- the small pulse is reflected and moves off to the right with a smaller amplitude
- the small pulse is reflected and moves off to the right with its original amplitude
- the two pulses combine into a single pulse moving to the right
Answer:
the large amplitude wave keeps moving to the right
the small amplitude wave continues to move to the left.
When checking the answers, the correct ones are 1, 2
Explanation:
The waves fulfill the principle of superposition, which states that the value of the function at a point is the algebraic sum of the waves at a given instant.
The two waves in this exercise travel in the opposite direction, so when they are close, the resulting wave is the sum of the two waves, having a complicated shape. But when the waves follow their movement, they give in the same way as the initial a,
the large amplitude wave keeps moving to the right
the small amplitude wave continues to move to the left.
When checking the answers, the correct ones are 1, 2
Sunlight strikes a piece of crown glass at an angle of incidence of 37.4o. Calculate the difference in the angle of refraction between a red (660 nm) and a blue (470 nm) ray within the glass. The index of refraction is n
Answer:
The difference in angle of refraction between the red and blue light is 0.2°
Explanation:
Here is the complete question
Sunlight strikes a piece of crown glass at an angle of incidence of 37.4°. Calculate the difference in the angle of refraction between a red (660 nm) and a blue (470 nm) ray within the glass. The index of refraction is n=1.520 for red and n=1.531 for blue light.
Solution
From Snell's law refractive index n = sini/sinr where i = angle of incidence and r = angle of refraction.
Now for the red light n₁ = 1.520, i = 37.4° and r₁ = angle of refraction of red light
So, n₁ = sini/sinr₁
n₁sinr₁ = sini
sinr₁ = sini/n₁
r₁ = sin⁻¹(sini/n₁) = sin⁻¹(sin37.4°/1.52) = sin⁻¹(0.6074/1.52) = sin⁻¹(0.3996) = 23.55°
Now for the blue light n₂ = 1.531, i = 37.4° and r₂ = angle of refraction of blue light
So, n₂ = sini/sinr₂
n₂sinr₂ = sini
sinr₂ = sini/n₂
r₂ = sin⁻¹(sini/n₂) = sin⁻¹(sin37.4°/1.531) = sin⁻¹(0.6074/1.531) = sin⁻¹(0.3967) = 23.37°
So the difference in angle of refraction between the red and blue light is r₁ - r₂ = 23.55° - 23.37° = 0.18° ≅ 0.2°
Scientists today learn about the world by _____. 1. using untested hypotheses to revise theories 2. observing, measuring, testing, and explaining their ideas 3. formulating conclusions without testing them 4. changing scientific laws
Answer:
Option 2 (observing, measuring, testing, and explaining their ideas) is the correct choice.
Explanation:
A traditional perception of such a scientist is those of an individual who performs experiments in some kind of a white coat. The reality of the situation is, a researcher can indeed be described as an individual interested in the comprehensive as well as a recorded review of the occurrences occurring in nature but perhaps not severely constrained to physics, chemistry as well as biology alone.The other three choices have no relation to a particular task. So the option given here is just the right one.
When a battery is connected to a lightbulb properly, current flows through the lightbulb and makes it glow. How much current flows through the battery compared with the lightbulb
Answer:
The same amount of current flows through the battery and light bulb
Explanation:
Because for a single loop, the current is the same at every point in the loop. Thus, the amount of current that flows through the lightbulb is the same as the amount that flows through the battery
Answer:
The same amount of current flows through the battery and light bulb
Explanation:
A circuit contains a single 220 pF capacitor hooked across a battery. It is desired to store three times as much energy in a combination of two capacitors by adding a single capacitor to this one.
How would you hook it up?
The capacitor is connected in series to the original capacitor
or
The capacitor is connected in parallel to the original capacitor
I believe its parallel
but now What would its value be?
Answer
The capacitor should be connected in parallel as parallel connection gives the arithmetic sum of capacitance which will give a corresponding sum of energy while capacitors in series gives the sum of the reciprocal if the individual capacitance
A dipole is oriented along the x axis. The dipole moment is p (= qs). (Assume the center of the dipole is located at the origin with positive charge to the right and negative charge to the left.)
Calculate exactly the potential V (relative to infinity) at a location x, 0, 0 on the x axis and at a location 0, y, 0 on the y axis, by superposition of the individual 1/r contributions to the potential. (Use the following as necessary: q, ε0, x, s and y.)
Answer:
Explanation:
dipole moment = qs = q x s
= charge x charge separation
charge = q
separation between charge = s
half separation l = s / 2
dipole has two charges + q and - q separated by distance s .
Potential at distance x along x axis due to + q
[tex]v_1=\frac{1}{4\pi \epsilon } \times\frac{q}{x-l}[/tex]
Potential at distance x along x axis due to - q
[tex]v_2=\frac{1}{4\pi \epsilon } \times\frac{-q}{x+l}[/tex]
Total potential
v = v₁ + v₂
[tex]v=\frac{1}{4\pi \epsilon } \times( \frac{q}{x-l}-\frac{q}{x+l})[/tex]
[tex]v=\frac{1}{4\pi \epsilon } \times\frac{2ql}{x^2-l^2}[/tex]
[tex]v=\frac{1}{4\pi \epsilon } \times\frac{qs}{x^2-(\frac{s}{2}) ^2}[/tex]
Potential at distance y along y axis due to + q
[tex]v_1=\frac{1}{4\pi \epsilon } \times\frac{qs}{(y^2+\frac{s^2}{4})^\frac{1}{2} }[/tex]
Potential at distance y along y axis due to - q
[tex]v_1=\frac{1}{4\pi \epsilon } \times\frac{-qs}{(y^2+\frac{s^2}{4})^\frac{1}{2} }[/tex]
Total potential
v = v₁ + v₂
[tex]v= 0[/tex]
Assume that the speed of light in a vacuum has the hypothetical value of 18.0 m/s. A car is moving at a constant speed of 14.0 m/s along a straight road. A home owner sitting on his porch sees the car pass between two telephone poles in 6.76 s. How much time does the driver of the car measure for his trip between the poles
Answer:
4.245s
Explanation:
Given that,
Hypothetical value of speed of light in a vacuum is 18 m/s
Speed of the car, 14 m/s
Time given is 6.76 s, and we're asked to find the observed time, T
The relationship between the two times can be given as
T = t / √[1 - (v²/c²)]
The missing variable were looking for is t, and we can find it if we rearrange the formula and make t the subject
t = T / √[1 - (v²/c²)]
And now, we substitute the values and insert into the equation
t = 6.76 * √[1 - (14²/18²)]
t = 6.76 * √[1 - (196/324)]
t = 6.76 * √(1 - 0.605)
t = 6.76 * √0.395
t = 6.76 * 0.628
t = 4.245 s
Therefore, the time the driver measures for the trip is 4.245s
You need to make a spring scale to measure the mass of objects hung from it. You want each 1.0 cm length along the scale to correspond to a mass difference of 0.10 kg. What should be the value of the spring constant?
Answer:
The spring constant should be:
[tex]k= 98\, \frac{N}{m}[/tex]
Explanation:
Use Hooke's law for this problem, knowing that the magnitude of the force (F) on the spring equals the stretching it experiences [tex]\Delta x[/tex] times the spring constant "k":
[tex]F=k\,\Delta x[/tex]
in our case, since the mass hanging is given in kg, we need to multiply it by "g" to get the force exerted:
Then if we add to the spring in its relaxed state, a mass of 0.10 kg, and we want for that a displacement of 1 cm (0.01 m), then the value of the spring constant should be:
[tex]k=\frac{F}{\Delta x} \\k=\frac{9.8\,(0.1)}{0.01} \, \frac{N}{m} \\k= 98\, \frac{N}{m}[/tex]
6)the speed of light is approximately 186,000 mi/sec. It takes light from a particular star approximately 9 yrs to reach Earth. How many miles away is the star from Earth? Express the answer in scientific notation. Use 365 days in 1 year. The star is nothing miles away from Earth.
Answer:
5.2791264*10¹³
Explanation:
Convert the 9 years to seconds and then multiple it by 186000
The star is 4.62 x 10¹⁶ miles away from Earth.
The speed of light is 186,000 miles per second. It takes light from a particular star approximately 9 years to reach Earth. There are 365 days in 1 year, so it takes 9 x 365 = 3285 days for light from the star to reach Earth.
The distance between the star and Earth is 3285 x 186,000 = 608,810,000 miles. In scientific notation, this is 4.62 x 10¹⁶ miles.
Here is the calculation:
distance = speed * time
distance = 186,000 miles/second * 3285 days * 24 hours/day * 60 minutes/hour * 60 seconds/minute
distance = 608,810,000 miles
distance = 4.62 x 10¹⁶ miles
To know more about the Light, here
https://brainly.com/question/20296439
#SPJ2
A toroidal solenoid with 400 turns of wire and a mean radius of 6.0 cm carries a current of 0.25 A. The relative permeability of the core is 80.
(a) What is the magnetic field in the core?
(b) What part of the magnetic field is due to atomic currents?
Answer:
A) 0.0267 T
B) 0.0263 T
Explanation:
Given that
The number of turns, N = 400
Radius of the wire, r = 6 cm = 0.06 m
Current in the wire, I = 0.25 A
Relative permeability, K(m) = 80
See the attached picture for the calculation
Kasek rides his bicycle down a 6.0° hill (incline is
6° with the horizontal) at a steady speed of 4.0
m/s. Assuming a total mass of 75 kg (bicycle and
Kasek), what must be Kasek's power output to
climb the same hill at the same speed?
Answer:
P = 2923.89 W
Explanation:
Power is
P = F v
for which we must calculate the force, let's use Newton's second law, let's set a coordinate system with a flat parallel axis and the other axis (y) perpendicular to the plane
X Axis
F - Wₓ = 0
F = Wₓ
Y Axis
N - [tex]W_{y}[/tex] = 0
let's use trigonometry for the components of the weight
sin 6 = Wₓ / W
cos 6 = W_{y} / W
Wₓ = W sin 6
W_{y} = W cos 6
F = mg cos 6
F = 75 9.8 cos 6
F = 730.97 N
let's calculate the power
P = F v
P = 730.97 4.0
P = 2923.89 W
If you wish to observe features that are around the size of atoms, say 5.5 × 10^-10 m, with electromagnetic radiation, the radiation must have a wavelength of about the size of the atom itself.
Required:
a. What is its frequency?
b. What type of electromagnetic radiation might this be?
Answer:
a) 5.5×10^17 Hz
b) visible light
Explanation:
Since the wavelength of the electromagnetic radiation must be about the size of the about itself, this implies that;
λ= 5.5 × 10^-10 m
Since;
c= λ f and c= 3×10^8 ms-1
f= c/λ
f= 3×10^8/5.5 × 10^-10
f= 5.5×10^17 Hz
The electromagnetic wave is visible light
A system of four particles moves along a dimension. The center of mass is at rest, and the particles do not interact with any objects outside of the system. Find the velocity of v4 at t=2.83 seconds given the details for the motion of particles 1,2,3
Answer:
v = - 14.08 m / s
Explanation:
The definition of center of mass is
[tex]x_{cm}[/tex] = 1 /M ∑sun [tex]x_{i} m_{i}[/tex]
where M is the total mass of the system and [tex]x_{i}[/tex] and [tex]m_{i}[/tex] are the position and mass of each component.
The velocity of the center of mass can be found by deriving this expression with respect to time
[tex]v_{cm}[/tex] = 1 / M ∑ m_{i} [tex]v_{i}[/tex] vi
let's find the total mass
M = m₁ + m₂ + m₃ + m₄
M = 1.45 + 2.81 +3.89 + 5.03
m = 13.18 kg
let us substitute in the velocity of the center of mass [tex]v_{cm}[/tex] = 0
0 = 13.18 (m₁ v₁ + m₂ v₂ + m₃v₃ + m₄v₄)
v₄ = - (m₁ v₁ + m₂ v₂ + m₃v₃) / m₄
let's substitute the given values
v₄ = -[1.45 (6.09 +0.299 t) +2.81 (7.83 + 0.357t) +3.89 (8.09 + 0.405 t)] / 5.03
They ask us for the calculations for a time t = 2.83 s
v₄ = - [8.8305 + 1.227 + 22.00 + 2.839 + 31.47 +4.4585] / 5.03
v = - 14.08 m / s
The velocity of the particle 4 at time, t = 2.83 s, is -14.1 m/s.
The given parameters;
[tex]m_1 = 1.45 \ kg, \ \ v_1(t) = (6.09 \ m/s) + (0.299 \ m/s^2)\times t\\\\m_2 = 2.81 \ kg, \ \ v_2(t) = (7.83 \ m/s) + (0.357 \ m/s^2)\times t \\\\m_3 = 3.89 \ kg, \ \ v_3(t) = (8.09 \ m/s) + (0.405 \ m/s^2)\times t\\\\m_4 = 5.03 \ kg[/tex]
The velocity of the center mass of the particles is calculated as;
[tex]M_{cm}V_{cm} = m_1v_1 + m_2 v_2 + m_3v_3 + m_4v_4\\\\V_{cm} = \frac{m_1v_1 + m_2 v_2 + m_3v_3 + m_4v_4}{M_{cm}} \\\\0 = \frac{m_1v_1 + m_2 v_2 + m_3v_3 + m_4v_4}{M_{cm}}\\\\m_1v_1 + m_2 v_2 + m_3v_3 + m_4v_4 = 0\\\\m_4v_4 = -(m_1v_1 + m_2 v_2 + m_3v_3)\\\\v_4 = \frac{-(m_1v_1 + m_2 v_2 + m_3v_3)}{m_4}[/tex]
The velocity of particle 1 at time, t = 2.83 s;
[tex]v_1 = 6.09 \ + \ 0.299\times 2.83\\\\v_1 = 6.94 \ m/s[/tex]
The velocity of particle 2 at time, t = 2.83 s;
[tex]v_2 = 7.83\ + \ 0.357\times 2.83\\\\v_2 = 8.84 \ m/s[/tex]
The velocity of particle 3 at time, t = 2.83 s;
[tex]v_3 = 8.09\ + \ 0.405 \times 2.83\\\\v_3 = 9.24 \ m/s[/tex]
The velocity of the particle 4 at time, t = 2.83 s;
[tex]v_4 = \frac{-(m_1v_1 + m_2v_2 + m_3v_3)}{m_4} \\\\v_4 = \frac{-(1.45\times 6.94\ + \ 2.81\times 8.84\ + \ 3.89 \times 9.24)}{5.03} \\\\v_4 = -14 .1 \ m/s[/tex]
Thus, the velocity of the particle 4 at time, t = 2.83 s, is -14.1 m/s.
Learn more here:https://brainly.com/question/22698801
Light with an intensity of 1 kW/m2 falls normally on a surface with an area of 1 cm2 and is completely absorbed. The force of the radiation on the surface is
Answer:
The force of the radiation on the surface is 3.33 x 10⁻¹⁰ N
Explanation:
Given;
intensity of light, I = 1kw/m² = 1000 W/m²
area of the surface, A = 1 cm² = 1 x 10⁻⁴ m²
Since the light is completely absorbed, the force of the radiation is given by;
F = P/c
where;
c is the speed of light = 3 x 10⁸ m/s
But P = IA
F = IA /c
F = (1000 X 1 X 10⁻⁴) / 3 x 10⁸
F = 3.33 x 10⁻¹⁰ N
Therefore, the force of the radiation on the surface is 3.33 x 10⁻¹⁰ N
The force of radiation will be "3.33 × 10⁻¹⁰ N"
Intensity and ForceAccording to the question,
Intensity of force, I = 1 kW/m² or,
= 1000 W/m²
Area of surface, A = 1 cm² or,
= 1 × 10⁻⁴ m²
Speed of light, c = 3 × 10³ m/s
As we know the relation,
→ F = [tex]\frac{P}{c}[/tex]
or,
P = IA
or,
F = [tex]\frac{IA}{c}[/tex]
By substituting the values, we get
= [tex]\frac{1000\times 1\times 10^{-4}}{3\times 10^3}[/tex]
= 3.33 × 10⁻¹⁰ N
Thus the response above is correct.
Find out more information about intensity here:
https://brainly.com/question/1444040
If two firecrackers produce a sound level of 81 dBdB when fired simultaneously at a certain place, what will be the sound level if only one is exploded?
Answer:
77.96dB
Explanation:
Recall that decibels are a unit of measuring intensity of sound, and depend on the logarithm of the intensity
the intensity, measured in decibels is given by:
I(db)=10log(I/I0)
I is the intensity in MKS units; I0 is the threshold intensity for human hearing (10^-12 W/m^2)
Thus, if the two sounds together have a dB of 81, we know:
81=10log(I/I0)
using the data above, we can find the intensity of the two sounds to be
0.000125 W/m^2
therefore, one firecracker has an intensity half of that, or 0.0000625W/m^2
now use this value to find the dB of one firecracker:
I(dB0=10log(0.0000625/10^-12)=77.96dB
PLEASE ANSWER ASAP
What happens to the ocean water before the precipitation part of the water cycle? ANSWERS; A.The ocean water condenses into the clouds. B.The ocean water collects back in the ocean. C.The ocean water falls back to Earth's surface. D. The ocean water runs off Earth's surface.
Answer:
B.
Explanation:
The water collects in the ocean; it is then evaporated by the sun. After evaporation the water turns into water vapor, it then condenses to form clouds.
The ocean water prior to the part of the water cycle should be option B.
Ocean water:The ocean water should be collected back in the ocean prior to the part of the water cycle.
Because this should be done when it is evaporated by the sun. When the evaporation is done so the water should be transformed into water vapor.
Find out more information about the Water here:brainly.com/question/4381433?referrer=searchResults
Air flows through a converging-diverging nozzle/diffuser. A normal shock stands in the diverging section of the nozzle. Assuming isentropic flow, air as an ideal gas, and constant specific heats determine the state at several locations in the system. Solve using equations rather than with the tables.
Answer:
HELLO your question has some missing parts below are the missing parts
note: The specific heat ratio and gas constant for air are given as k=1.4 and R=0.287 kJ/kg-K respectively.
--Given Values--
Inlet Temperature: T1 (K) = 325
Inlet pressure: P1 (kPa) = 560
Inlet Velocity: V1 (m/s) = 97
Throat Area: A (cm^2) = 5.3
Pressure upstream of (before) shock: Px (kPa) = 207.2
Mach number at exit: M = 0.1
Answer: A) match number at inlet = 0.2683
B) stagnation temperature at inlet = 329.68 k
C) stagnation pressure = 588.73 kPa
D) ) Throat temperature = 274.73 k
Explanation:
Determining states at several locations in the system
A) match number at inlet
= V1 / C1 = 97/ 261.427 = 0.2683
C1 = sound velocity at inlet = [tex]\sqrt{K*R*T}[/tex] = [tex]\sqrt{1.4 *0.287*10^3}[/tex] = 361.427 m/s
v1 = inlet velocity = 97
B) stagnation temperature at inlet
= T1 + [tex]\frac{V1 ^2}{2Cp}[/tex] = 325 + [tex]\frac{97^2}{2 * 1.005*10^{-3} }[/tex]
stagnation temperature = 329.68 k
C) stagnation pressure
= [tex]p1 ( 1 + 0.2Ma^2 )^{3.5}[/tex]
Ma = match number at inlet = 0.2683
p1 = inlet pressure = 560
hence stagnation pressure = 588.73 kPa
D) Throat temperature
= [tex]\frac{Th}{T} = \frac{2}{k+1}[/tex]
Th = throat temperature
T = stagnation temp at inlet = 329.68 k
k = 1.4
make Th subject of the relation
Th = 329.68 * (2 / 2.4 ) = 274.73 k
Suppose a 1300 kg car is traveling around a circular curve in a road at a constant
9.0 m/sec. If the curve in the road has a radius of 25 m, then what is the
magnitude of the unbalanced force that steers the car out of its natural straight-
line path?
Answer:
F = 4212 N
Explanation:
Given that,
Mass of a car, m = 1300 kg
Speed of car on the road is 9 m/s
Radius of curve, r = 25 m
We need to find the magnitude of the unbalanced force that steers the car out of its natural straight- line path. The force is called centripetal force. It can be given by :
[tex]F=\dfrac{mv^2}{r}\\\\F=\dfrac{1300\times 9^2}{25}\\\\F=4212\ N[/tex]
So, the force has a magnitude of 4212 N
A 50kg block slides down a slope that forms an angle of 54 degrees if it is known that when descending it has a force of 40N and a coefficient of friction of 0.33. What is the acceleration in the block?
Answer:
The acceleration in the block is 2.1 m/s²
Explanation:
Given that,
Mass = 50 kg
Angle = 54°
Force = 40 N
Coefficient of friction = 0.33
We need to calculate the acceleration in the block
Using balance equation
[tex]F_{net}=F_{f}-F\cos\theta[/tex]
[tex]ma=\mu mg\sin\theta-F\cos\theta[/tex]
[tex]a=\dfrac{\mu mg\sin\theta-F\cos\theta}{m}[/tex]
Put the value into the formula
[tex]a=\dfrac{0.33\times50\times9.8\sin54-40\cos54}{50}[/tex]
[tex]a=2.1\ m/s^2[/tex]
Hence, The acceleration in the block is 2.1 m/s²
(a) If electrons were used (electron microscope), what minimum kinetic energy would be required for the electrons
Answer:
K = 1.6 10⁻¹⁵ J
Explanation:
In an electron microscope, electrons are used to form images, these electrons are accelerated in electric fields so that they have a kinetic energy that allows obtaining a good amplification with the microscope.
electrical potential energy is converted to kinetic energy
U = K
e V = ½ m v²
v = √2eV /m
the wavelength of these electrons we obtain from the de Broglie equation
λ = h / p
p = mv
λ = h / mv
λ = h / mra 2eV / m
λ = h / ra 2eVm
where we can see that as the potential energy increases, it electrifies the shorter the wavelength of the electrons and consequently the greater the magnification of the microscope
in general these microscopes use from 10000X onwards therefore for this saponification
K = e V
K = 1.6 10⁻¹⁹ 10000
K = 1.6 10⁻¹⁵ J
A heat engine operates between 200 K and 100 K. In each cycle it takes 100 J from the hot reservoir, loses 25 J to the cold reservoir, and does 75 J of work. This heat engine violates the second law but not the first law of thermodynamics. Why is this true?
Answer:
It does not violate the first law because the total energy taken is what is used 100J = 25J + 75J
But violates 2nd lawbecause the engine has a higher energy after doing work than the initial for e.g A cold object in contact with a hot one never gets colder, transferring heat to the hot object and making it hotter confirming the second law
In an inertia balance, a body supported against gravity executes simple harmonic oscillations in a horizontal plane under the action of a set of springs. If a 1.00-kg body vibrates at 1.00 Hz, a 2.00-kg body will vibrate at Group of answer choices
Answer;
a 2.00-kg body will vibrate at 0.707Hz
Answer:-7.9
Explanation:
What type of tectonic plate boundary exists along the edge of the North American plate near the coast of Northern California, Oregon, and Washington?
A reverse fault, like the Cascadia subduction zone off the coast of Oregon and Northern California (north of Mendocino California), has relatively deep earthquakes—like the 1964 Alaska earthquake and the 2004 Sumatra earthquake that caused the Boxing Day Tsunami.
True
False
Megathrust earthquakes can be strongest in magnitude—stronger than a San Andreas earthquake like 1906
Answer:
-transform plate boundary
- false
