The materials or compounds converted into new compounds in a chemical reaction are known as

The new volume of the helium gas sample will be  124 ml. This is due to the fact that when the temperature decreases while the pressure remains constant, the volume of a gas will increase.

According to Charles’s law, the volume of a given gas at a constant pressure is directly proportional to its absolute temperature. Therefore, a decrease in temperature, while holding constant the pressure of the helium gas, would result in a decrease in volume.

A constant pressure is the one under which the pressure of a substance remains unchanged as the temperature and/or volume of the substance change. Charles's law may be used to explain the properties of gases, particularly with constant pressure since it states that the volume of a given mass of a gas is directly proportional to its absolute temperature, provided that its pressure remains constant. It's written as:V1/T1 = V2/T2; whereV1 = 620 ml; T1 = 500K; T2 = 100KLet's put the values in the formula given above. The [tex][tex]620/T1 = V2/100V2 = 62,000/500V2 = 124 ml[/tex].[/tex]Therefore, the new volume of helium gas at a temperature of 100K would be 124 ml.

Read more about the volume :

https://brainly.com/question/463363

#SPJ11

The mass (in grams) of water, H₂O produced from 6.00 moles of hydrogen gas, H₂, is 108 g (last option)

We'll begin by obtaining the mole of water produced from the reaction. Details below:

2H₂(g) + O₂ -> 2H₂O

From the balanced equation above,

2 moles of H₂ reacted to produce 2 moles of H₂O

Therefore,

6 moles of H₂ will also react to produce 6 moles of H₂O

Finally, we shall determine the mass of water, H₂O produced. Details below:

Mole = mass / molar mass

6 = Mass of water, H₂O / 16

Cross multiply

Mass of water, H₂O = 6 × 18

Mass of water, H₂O = 108 g (last option)

Learn more about mass produced:

https://brainly.com/question/9526265

#SPJ1

In the Insoluble and Soluble Saltlab, the dropper bottles containing the anions to be studied were all soluble salt solutions. The dropper bottles containing the cations to be studied were all insoluble salt solutions.

Solubility refers to the ability of a substance to dissolve in a particular solvent. A compound is referred to as soluble if it dissolves in water, and insoluble if it does not. Solubility is a crucial physical property in the characterization of the chemical nature of a substance.

A salt that can be dissolved in a solvent, such as water, is known as a soluble salt. Soluble salts can dissolve in water or other solvents to create a clear or transparent solution.

A salt that cannot be dissolved in a solvent, such as water, is referred to as an insoluble salt. When insoluble salts are mixed with water, they form a cloudy or opaque mixture that gradually settles out or falls to the bottom.In the Insoluble and Soluble Saltlab, the dropper bottles containing the anions to be studied were all soluble salt solutions. The dropper bottles containing the cations to be studied were all insoluble salt solutions.

See more about Solubility in:

https://brainly.com/question/9098308

#SPJ11

The concentrations of A and B in the reaction after a time of about 75 seconds are 0.0465 M.

The initial concentration of AB is 0.290M. The reaction mixture initially contains no products. The reaction time is 75 seconds, and you need to determine the concentration of A and B. The balanced chemical equation of the reaction is as follows: AB → A + B

According to the law of chemical equilibrium, the concentration of products and reactants changes until a state of equilibrium is reached. As a result, the initial concentration of AB decreases, while that of A and B increases by the same amount. At equilibrium, the rate of the forward reaction is the same as the rate of the backward reaction. As a result, the concentration of the reactants and products remains constant for a long period of time, and the reaction has reached equilibrium. As a result, it is important to identify whether or not the reaction has reached equilibrium. The concentration of A and B is calculated using the following formula:

[A] = C₀ - x

[B] = C₀ - x

[AB] = C₀ - x

Here, x is the amount of the substance that has reacted. Since, we know the initial concentration of AB, we can solve for the value of x. We will then use the value of x to compute the concentrations of A and B. For a reaction, the initial concentration of AB is 0.290M. The reaction mixture initially contains no products. The reaction time is 75 seconds, and you need to determine the concentration of A and B.

The given reaction can be balanced as follows: AB → A + B. Let's assume that at equilibrium, the amount of A and B produced is "x."

[AB] = C-x

Let's calculate the equilibrium concentration of AB:

[AB] = C₀ - x = 0.290 M - x

At equilibrium, the concentrations of A and B are equal since they are produced in equal amounts. Using the law of chemical equilibrium, we can construct the equilibrium constant expression for the reaction:

Kc =x²{0.290 - x}

The equilibrium concentration of AB is 0.290 M - x. The equilibrium concentration of A and B is: x². The equilibrium constant expression can be used to find the value of x. Put the value of [AB], [A], and [B] in the formula of equilibrium constant expression: Kc = x²{0.290 - x}

5.26 = x²{0.290 - x}

{x=0.093}

After solving for x, we get the value of 0.093 M. Therefore, the concentration of A and B at equilibrium is:

[A] = [B] = x{2} = {0.093}{2} = 0.0465

Hence, the concentrations of A and B after 75 seconds are 0.0465 M.

Learn more about Equilibrium concentration here:

https://brainly.com/question/16645766

#SPJ11

Answer:

The Clausius-Clapeyron equation is given by:

ln(P2/P1) = -(ΔHvap/R) * (1/T2 - 1/T1)

where P1 and T1 are the vapor pressure and temperature of the substance at one point, P2 and T2 are the vapor pressure and temperature at another point, ΔHvap is the enthalpy of vaporization, and R is the gas constant.

We can use this equation to find the vapor pressure of methanol at 73.5°C, given the vapor pressure of water at 100.0°C.

First, we convert the temperatures to Kelvin:

T1 = 100.0°C = 373.2 K

T2 = 73.5°C = 346.7 K

Next, we substitute the values into the equation, along with the enthalpy of vaporization for methanol and the gas constant:

ln(P2/101.3 kPa) = -(35.2 kJ/mol / 8.314 J/(mol*K)) * (1/346.7 K - 1/373.2 K)

Simplifying, we get:

ln(P2/101.3 kPa) = -5.631

Taking the exponential of both sides, we get:

P2/101.3 kPa = e^(-5.631)

P2 = 101.3 kPa * e^(-5.631)

P2 = 2.784 kPa

Therefore, the vapor pressure of methanol at 73.5°C is approximately 2.784 kPa, to the first decimal point.

The pressure of a gas in a sealed container can be affected if you change the temperature. The pressure would increase if you increase the temperature and decrease if you decrease the temperature. Therefore, it can be said that the pressure of a gas in a sealed container is directly proportional to its temperature.

The variables that must be kept constant while determining the functional relationship between pressure and temperature of a gas are as follows:

Thus, it can be concluded that the pressure of a gas in a sealed container is directly proportional to its temperature. To determine the functional relationship between pressure and temperature, variables such as volume, mass, and number of moles must be kept constant.

Learn more about variables: https://brainly.com/question/25223322

#SPJ11

Precipitate production, gas evolution, heat release or absorption, a change in colour or odour, and the creation of a new material are all examples of chemical reaction evidence.

Atoms can rearrange themselves or new chemical connections can be created during a chemical reaction. One or more of the observable indicators listed below are typically present along with these changes:

Precipitate formation: A precipitate is a solid that develops from a chemical reaction in a solution. It is an obvious sign that a chemical reaction has occurred. Gas evolution: A chemical reaction can be detected by the emergence of gas bubbles, effervescence, or foaming. Heat production or absorption might indicate a chemical reaction by changing the temperature. Although an endothermic process takes in heat, an exothermic reaction releases heat. A change in colour or smell is frequently an indication of a chemical reaction. development of a brand-new substance A new substance or substances are created as a result of a chemical reaction that are chemically different from the original substance (s). Any of these symptoms will exist if a chemical reaction has taken place. However, because some reactions may be sluggish or fail to create any noticeable changes, the absence of these indicators does not always imply that a reaction has not taken place.

learn more about chemical reaction here:

https://brainly.com/question/29039149

#SPJ4

Answer: The balanced chemical equation for the formation of 3-methyl-2-butanol is: 2C + 5H₂ + O₂ → C₅H₁₂O

Explanation: The balanced chemical equation for the formation of 3-methyl-2-butanol from the elements carbon (C), hydrogen (H₂), and oxygen (O₂) is given as follows:

2C + 5H₂ + O₂ → 3-methyl-2-butanol (C₅H₁₂O)

The above equation is balanced since the number of atoms of the elements present in the reactants is equal to the number of atoms of the elements present in the products.

Thus, the balanced chemical equation for the formation of 3-methyl-2-butanol from the elements carbon (C), hydrogen (H2), and oxygen (O2) is 2C + 5H₂ + O₂ → C₅H₁₂O

Learn more about balancing chemical equations here:

https://brainly.com/question/11904811

#SPJ11

Answer:

Explanation:

I_3^−

The triiodide ion, I3−, is a polyatomic anion composed of three iodine atoms. It has a central iodine atom, which is surrounded by two other iodine atoms in a trigonal planar geometry. The hybridization of the central atom is sp2. This is because the central atom has 3 electron pairs in its valence shell, which means it needs to form three bonds with the other atoms. This requires the central atom to use one s-orbital and two p-orbitals to form three sp2 hybrid orbitals. These three sp2 orbitals are then used to form the three bonds with the other two iodine atoms, resulting in a trigonal planar geometry.

Answer:

Hope it's correct

Explanation:

2 mol of C2H6 = 7 mol of O2

So 20 mol of C2H6 = ? (20/2)*7 = 70 mol

Answer:

Explanation: Use the formula density = mass divided by volume

so to get the answer multiply the density by the volume

Answer: 1.63 x (0.25x1000)

we multiply 0.25 by 1000 because we need to use volume in ml instead of L.

The key response is that P waves on an ECG would be diminished or absent in atrial fibrillation. An electrocardiogram (ECG), a test that gauges the electrical activity of the heart.

Atrial fibrillation causes uncontrolled electrical activity in the atria, which causes irregular and frequently rapid heartbeats. An electrocardiogram (ECG), a test that gauges the electrical activity of the heart, can identify this aberrant activity. Atrial fibrillation is characterised by the rapid and irregular fibrillation waves, which can be challenging to identify from the ventricle's T waves. Normally, atrial fibrillation is characterised by P waves, which represent the electrical activity of the atria. P waves are consequently frequently diminished or missing on an ECG in atrial fibrillation. Atrial fibrillation can be distinguished from other arrhythmias by the irregular QRS complexes and absence of P waves, which are characteristics of the condition.

learn more about atrial fibrillation here:

https://brainly.com/question/30414659

#SPJ4

The coefficients that would balance the reaction equation is;

C3H8 + 5O2 → 3CO2 + 4H2O

Here are the steps to balance a chemical equation:

Write the unbalanced chemical equation using the correct chemical formulas for the reactants and products.

Count the number of atoms of each element on both the reactant and product sides of the equation.

Start by balancing the atoms of the most complex or least common element in the equation, such as oxygen or hydrogen.

Balance the element by adding coefficients (whole numbers) in front of the formulas for the reactants or products.

Repeat this process for each element in the equation until the number of atoms of each element is equal on both sides.

Double-check your work by counting the number of atoms of each element and making sure they are balanced.

Learn more about reaction equation:https://brainly.com/question/3588292

#SPJ1

The effective half life of sodium iodide whose physical life is 8 days is 6 days.

What is half life?

The entire rate of a radioactive material's decay in a certain system, taking into account both its physical and biological half-lives, is measured by its effective half-life. It is determined by multiplying the reciprocals of the physical and biological half-lives together.

Given that the biological half-life of sodium iodine is 24 days and its physical half-life is 8 days, we can compute its effective half-life as follows:

Effective half-life = 1 / (1/physical half-life + 1/biological half-life)

= 1 / (1/8 + 1/24)

= 1 / (0.125 + 0.0417)

= 1 / 0.1667

= 6 days (approximately)

Therefore, the effective half-life of sodium iodine is approximately 6 days.

Learn more about half life on:

https://brainly.com/question/1160651

#SPJ11

TRUE. The codons in mRNA, which are collections of three nucleotides, stand for certain amino acids that are combined to produce proteins during translation.

In order to create a protein, the information contained in mRNA must be deciphered during the process of translation. The genetic code that regulates the order in which amino acids are put together to make proteins is found in the sequence of nucleotides in mRNA known as codons. A codon is made up of three nucleotides, each of which stands for an amino acid or a stop signal that denotes the completion of protein synthesis. The ribosome scans the mRNA's codon sequence during translation and matches each codon with the appropriate amino acid. A functional protein is produced when a chain of amino acids that have been joined together by peptide bonds folds into a three-dimensional structure. Hence, the codons in mRNA play a critical role in determining the amino acid sequence of a protein.

learn more about codons here:

https://brainly.com/question/9382652

#SPJ4

Answer:

Answer: The final volume of the gas will be 8.07 L.

Approximate number of tubes Amelia can fill = 8.07 L/500 mL = 16.14 tubes.

A student makes three plots of their data and finds that a plot of [A] vs t is linear, a plot of ln[A] vs t is non-linear, and a plot of 1/[A] vs t is non-linear. The rate law of the reaction is b. Rate = k[A]

The given question is related to the rate law of the reaction. The student makes three plots of their data and finds that a plot of [A] vs t is linear, a plot of ln[A] vs t is non-linear, and a plot of 1/[A] vs t is non-linear. The rate law of a reaction is a mathematical equation that relates the rate of the reaction to the concentrations of reactants and the reaction's constant of proportionality. The rate law is also called the rate equation or rate expression.

As per the given information, the plot of [A] vs t is linear, which means that the reaction is a first-order reaction. The plot of ln[A] vs t is non-linear, which means that the reaction is not zero-order or first-order. It could be a second-order or third-order reaction. The plot of 1/[A] vs t is non-linear, which means that the reaction is not a first-order reaction. It could be a second-order or third-order reaction. Therefore, the rate law of the reaction can be given as Rate = k[A]. This represents a first-order reaction. Hence, the correct option is Rate = k[A].

Learn more about rate law at:

https://brainly.com/question/14779101

#SPJ11

1. - c. Absolute dating

2. - k. Zircon

3. - m. Meteorites

4.- h. Compression melting

5. - e. Relative dating

6. - a. An igneous intrusion

7. - g. Unconformity

8. - d. Index fossils

9. - f. The Grand Canyon

10.- b. Iguazu Falls in Argentina

11. -h. Yosemite Valley

12.- i. Carbon 14 dating

13.-c. Radiometric dating

Carbon 14 dating, also known as radiocarbon dating, is a technique used to determine the age of organic materials based on their content of the radioactive isotope carbon-14. Carbon-14 is a naturally occurring isotope of carbon that is formed in the upper atmosphere by the interaction of cosmic rays with nitrogen atoms. This carbon-14 is incorporated into carbon dioxide molecules, which are then taken up by plants during photosynthesis and subsequently passed on to animals that eat those plants.

When an organism dies, it stops taking in carbon-14, and the carbon-14 in its tissues begins to decay into nitrogen-14 at a known rate. By measuring the amount of carbon-14 that remains in the sample, scientists can determine how long it has been since the organism died.

To know more about cosmic rays, visit:

https://brainly.com/question/13960192

#SPJ1

The final concentration of DCMU in the locomotion chambers will be 0.1 mM. If 10mL of the Chlamydomonas, 100 microliters of sterile water, and 100 microliters of 10mM DCMU is added.

To Calculate the final concentration of Sodium Azide and DCMU in the locomotion chambers. The final concentration of Sodium Azide in the locomotion chambers will be 10mM (millimolar) if 10mL (milliliters) of the Chlamydomonas, 100 μL (microliters) of sterile water, and 100 μL of 1M (molar) Sodium Azide is added.

The final concentration of DCMU (3-(3,4-dichlorophenyl)-1,1-dimethylurea) in the locomotion chambers will be 0.1 mM (millimolar) if 10 mL (milliliters) of the Chlamydomonas, 100 μL (microliters) of sterile water, and 100 μL of 10 mM (millimolar) DCMU are added.

Calculating the final concentration of DCMU:

Formula: C1V1 = C2V2C1 = initial concentration of DCMU = 10 mMV1 = volume of DCMU added = 100 μL (microliters)C2 = final concentration of DCMU = ?V2 = final volume = 10 mL + 100 μL + 100 μL = 10.2 mL

(convert 100 μL to mL by dividing it by 1000)

Substituting the values in the formula:

C1V1 = C2V210 mM x 100 μL = C2 x 10.2 mL1000 (since 1 mL = 1000 μL)C2 = 0.098 mM (millimolar) = 0.1 mM (approx.)

Thus, the final concentration of DCMU in the locomotion chambers will be 0.1 mM if 10mL of the Chlamydomonas, 100 microliters of sterile water, and 100 microliters of 10mM DCMU is added.

For more such questions on concentration , Visit:

https://brainly.com/question/28564792

#SPJ11

Balanced redox equation involves the transfer of electrons between species, with the species that loses electrons (the reducing agent) being oxidized and the species that gains electrons (the oxidizing agent) being reduced.

Oxidation is a chemical reaction in which a substance loses electrons, resulting in an increase in its oxidation state. In other words, oxidation involves the transfer of electrons from one species to another, with the species that loses electrons being oxidized. This process often involves the addition of oxygen, but it can also occur without the presence of oxygen.

For example, when iron reacts with oxygen to form rust, iron is oxidized because it loses electrons and oxygen is reduced because it gains electrons:

4 Fe + 3 O2 → 2 Fe2O3

In this reaction, iron goes from an oxidation state of zero to an oxidation state of +3, indicating that it has lost three electrons. Oxygen goes from an oxidation state of zero to an oxidation state of -2, indicating that it has gained two electrons.

To know more about oxidized visit :

https://brainly.com/question/19761029

#SPJ1

Answer:

A)law of multiple proportions

Explanation:

Photosystem II receives replacement electrons from molecules of water (H2O) during the light-dependent reactions of photosynthesis.

Photosystem II (PSII) is a protein complex found in the thylakoid membrane of chloroplasts in photosynthetic organisms. It plays a critical role in the light-dependent reactions of photosynthesis by harnessing energy from sunlight to split water molecules into oxygen, protons, and electrons. The replacement electrons for PSII are derived from the oxidation of water molecules. This process, known as photolysis, involves the transfer of electrons from water molecules to PSII, replenishing the electrons lost during light-dependent reactions. As a result, water is converted into oxygen gas, which is released into the atmosphere as a byproduct of photosynthesis.

In summary, molecules of water provide the replacement electrons required by PSII to maintain the flow of electrons during the light-dependent reactions of photosynthesis.

learn more about molecules of water here:

https://brainly.com/question/26529979

#SPJ4

3. a) One possible mechanism for this reaction is: 3 Fe + 4 H₂O ⇌ Fe₃O₄ + 4 H₂

b) A catalyst is a substance that increases the rate of a chemical reaction without undergoing any permanent chemical change itself.

c) second-order reaction.

4. a) The expression of the equilibrium constant for the given reaction is:

Kc = ([Fe₃O₄][H₂]⁴) / ([Fe]³[H₂O]⁴)

b) Increasing the pressure will favor the indirect reaction and slow down the direct reaction.

c) Since the indirect reaction is favored by the increased pressure, the chemical equilibrium will shift to the right, towards the product side.

The method of initial rates involves measuring the initial rate of the reaction under different initial concentrations of the reactants. By comparing the initial rates, we can determine the order of the reaction with respect to each reactant.

Assuming that the rate law of the reaction is:

rate = k[Fe]^x[H₂O]^y

where k is the rate constant, and x and y are the orders of the reaction with respect to Fe and H2O, respectively.

Experimentally, measure the initial rate of the reaction under different initial concentrations of Fe and H₂O while keeping the concentration of the other reactant constant.

For example, suppose we measure the initial rates of the reaction at the following initial concentrations:

Experiment #1: [Fe] = 0.1 M, [H₂O] = 0.2 M, initial rate = 0.005 M/s

Experiment #2: [Fe] = 0.2 M, [H₂O] = 0.2 M, initial rate = 0.02 M/s

Experiment #3: [Fe] = 0.4 M, [H₂O] = 0.2 M, initial rate = 0.08 M/s

Use the rate data to determine the orders of the reaction with respect to Fe and H₂O. To do this, we compare the initial rates of the reaction under different initial concentrations of Fe and H₂O while keeping the concentration of the other reactant constant.

Suppose we double the concentration of Fe while keeping the concentration of H₂O constant. According to experiment 2 and experiment 1, the rate of the reaction doubles. This means that the order of the reaction with respect to Fe is 1.

Similarly, if we double the concentration of H₂O while keeping the concentration of Fe constant, we can see that the rate of the reaction doubles from experiment 1 to experiment 3. This means that the order of the reaction with respect to H₂O is also 1.

Therefore, the overall order of the reaction is the sum of the orders of the reactants, which is:

overall order = 1 + 1 = 2

Hence, the given reaction is a second-order reaction.

Learn more here on mechanisms here: https://brainly.com/question/27921705

#SPJ1

The complete question is:

3. For the reaction at equilibrium: 3Fe+410 Fe,0+4H a) Identify a possible mechanism. b) Define catalyst c) Determine the general order of the reaction. 4. For the reaction at equilibrium: 3Fe+410 Fe,0+4H a) Write the expression of the equilibrium constant. b) Show how the speed of the direct and indirect reaction changes, if the pressure increases 3 times. e) Argue whether the chemical equilibrium shifts when the pressure increases 3 times. (4 points)​

When 4 moles of sodium fully react, 2 moles of hydrogen are produced as a whole. The right answer is B.

The balanced equation for the reaction between sodium and water is 2Na + 2H2O → 2NaOH + H2. This equation shows that 2 moles of sodium react with 2 moles of water to produce 1 mole of hydrogen gas.

If 4 moles of sodium react completely, we can calculate the amount of hydrogen produced by using stoichiometry. Since 2 moles of sodium produce 1 mole of hydrogen, 4 moles of sodium will produce 2 moles of hydrogen (4 moles Na x 1 mole H2 / 2 moles Na = 2 moles H2).

Therefore, the total number of moles of hydrogen produced when 4 moles of sodium react completely is 2 moles. The correct answer is B.

To learn more about  sodium  refer to:

brainly.com/question/29327783

#SPJ4

Answer:

What volume of 0.125 M HNO3, in milliliters, is required to react completely with 1.70 g of Ba(OH)2? 2 HNO3(aq) + Ba(OH)2(s) Ba(NO3)2(aq) + 2 H2O(l)

Explanation:

The complete and balanced chemical equation for the reaction of nitric acid

H

N

O

3

with barium hydroxide

B

a

(

O

H

)

3

is given by

2

H

N

O

3

(

a

q

)

+

B

a

(

O

H

)

2

→

B

a

(

N

O

3

)

2

(

a

q

)

+

2

H

2

O

(

a

q

)

The volume of a certain concentration of nitric acid

H

N

O

3

required to react with a particular amount of

B

a

(

O

H

)

2

is obtained by first calculating the number of moles of

H

N

O

3

using stoichiometry. Using the molar mass of

B

a

(

O

H

)

2

,

M

M

B

a

(

O

H

)

2

=

171.3

g

/

m

o

l

,

and the mole ratio

2

m

o

l

H

N

O

3

1

m

o

l

B

a

(

O

H

)

2

,

then

{eq}\begin{align} \rm moles\ of\ HNO_3...

hope it hels you

A good starting point for citation chaining would be a relevant and well-cited article or book that directly relates to your research the topic.

This article or book should have a comprehensive bibliography or  the reference list that you can use to find additional sources. By examining the references cited in the original article, you can identify the other articles and books that are likely to be relevant to your research. Then, you can examine the references in those articles to find even more sources, continuing the process until you have a comprehensive set of relevant sources for your research.

To know more about citation chaining, here

brainly.com/question/29413043

#SPJ4

At the resting membrane potential, the membrane is most permeable to potassium ions (K+), which move out of the cell due to its concentration gradient and the negative charge inside the cell.  Correct answer is option: E.

This movement of K+ ions out of the cell contributes to the negative resting membrane potential of approximately -70 mV in most cells.  The resting membrane potential is maintained by the selective permeability of the cell membrane, which allows for the movement of certain ions across the membrane. In general, the membrane is less permeable to sodium (Na+) and chloride (Cl-) ions at rest, and the movement of these ions across the membrane is limited. Thus, option E "potassium" is the correct answer.

To know more about resting membrane, here

brainly.com/question/8438145

#SPJ4

c. 276 mL of 1.58 M HCl.

To answer this question, we need to use the mole ratio between the two reactants: 1 mole of HCl for every 1 mole of NaHCO3.

In this case, we need 23.2 g of NaHCO3, which is equal to 0.273 moles (23.2 g / 84.02 g/mol).

Since we need 1 mole of HCl for every 1 mole of NaHCO3, we can calculate the number of moles of HCl needed with the following equation: 0.273 moles of NaHCO3 x 1 mole HCl/1 mole NaHCO3 = 0.273 moles of HCl.

Now we can use the molarity of HCl (1.58 M) to calculate the volume of HCl needed. 1.58 M HCl x 0.273 moles HCl/1 L HCl = 0.433 L HCl, or 433 mL of HCl. Therefore, the correct answer is c. 276 mL of 1.58 M HCl.

To know more about mole ratio, refer here:

https://brainly.com/question/28997213#

#SPJ11

According to the Mohs scale of hardness, the unidentified mineral sample's hardness can be calculated to be between 4 and 5 if it can scratch fluorite but not apatite.

The Mohs hardness scale, a qualitative scale with 1 being the softest (talc) and 10 being the hardest, rates minerals according to their relative hardness (diamond). The scale is determined by a material's capacity to scrape another mineral. Any mineral with a lower number on the scale can be scratched, while a mineral with a greater number cannot be scratched. The unknown mineral must have a hardness between 4 and 5, as it can scratch fluorite (hardness of 4) but not apatite (hardness of 5). based upon With this knowledge, it is possible to estimate that the unidentified mineral has a Mohs hardness of about 4.5.

learn more about mineral  here:

https://brainly.com/question/18078524

#SPJ4

The zeolite that you will make and use has repeating and alternating tetrahedral units of SiO4 and AlO4 bonding through the oxygen atoms. Therefore, the given statement is true.

Zeolites have repeating and alternating tetrahedral units of SiO4 and AlO4 bonding through the oxygen atoms.Zeolites are aluminosilicate minerals that are mostly found in volcanic rocks and soils.

They have a distinctive and extensive network of pores and channels. Zeolites are also used in ion exchange, adsorption, and catalysis processes as a result of their porous and chemically active structure. Zeolites are extensively employed in the separation, adsorption, and catalytic conversion of petroleum-based products, as well as in waste-water treatment processes. Zeolite is a naturally occurring mineral. However, it may also be synthesized in a laboratory. Zeolites are widely used in several applications due to their porous and chemically active structure.

These applications include gas separation, petroleum refining, catalysis, and water purification. They are used to adsorb impurities, filter out toxic gases, and remove radioactive particles from water.

for such more question on oxygen atoms

https://brainly.com/question/15457775

#SPJ11