Answer:
≈ 0.70 g/cm³ (answer rounded up to 2 decimal places)
Explanation:
The mass of empty cylinder is 20g
The mass of water filling the cylinder = 30g - 20g = 10g
The mass of unknown liquid filling the cylinder = 27g - 20g = 7g
Density of water = 997 kg/m³
Converting this density to g/cm³ we get;
1kg = 1000g , 1m³ = 1000000cm³
So density = [tex]\frac{997000}{1000000}[/tex] g/cm³ = 0.997 g/cm³
So the volume of water occupied by 10g is;
10 × 0.997 = 9.97 cm³
This volume is also occupied by 7g of the unknown liquid.
Density = mass/volume
Density of the unknown liquid = 7g ÷ 9.97cm³ = 0.702106319 g/cm³ ≈ 0.70 g/cm³ (answer rounded up to 2 decimal places)
percentage of carbon in urea
The percentage of carbon in urea is [CO(NH 2) 2] is 20%
A sample of copper is heated to 100°C and placed into a calorimeter containing 50 g of water at 25°C after a few minutes the final temperature of the system reaches 40°C how much heat in joules was released by the copper Sample
Answer:
Heat = 3138J
Explanation:
In the system, the sample of Copper is releasing heat that produce the increasing in the temperature of water.
Using the equation of calorimeter, we can find the heat released for the sample of copper (The same that is absorbed for the water):
Q = C×m×ΔT
Where Q is heat, C is specific heat (For water: 4.184J/molK), m is the mass of water (50g) and ΔT is change in temperature of water (40°C-25°C = 15°C)
Replacing:
Q = 4.184J/molK×50g×15°C
Q = 3138J is the heat released for the sample of Copper (The same absorbed for the water).
Answer:
heat=3138j
Explanation:
In the system, the sample of Copper is releasing heat that produce the increasing in the temperature of water.
Using the equation of calorimeter, we can find the heat released for the sample of copper (The same that is absorbed for the water):
Q = C×m×ΔT
Where Q is heat, C is specific heat (For water: 4.184J/molK), m is the mass of water (50g) and ΔT is change in temperature of water (40°C-25°C = 15°C)
Replacing:
Q = 4.184J/molK×50g×15°C
Q = 3138J is the heat released for the sample of Copper (The same absorbed for the water).
What are the properties of alkynes
PLEASE HELP WILL GIVE BRAINLIEST!!!!
If the concentration of substance A of a reversible reaction in dynamic equilibrium increases, how will the equilibrium change?
A. It will shift to create more of substance A.
B. It will shift towards the reactants.
C. It will shift towards the products.
D. It will shift to create less of substance A.
Answer:
[tex]\boxed{It\ will\ shift\ to\ create\ less\ of\ substance\ A}[/tex]
Explanation:
If the concentration of any substance A in a dynamic equilibrium increases, The equilibrium will be shifted to its opposite side so that Substance A can be created less and the substance opposite to A can be created more so that a "dynamic equilibrium" can again be established.
Over the period of a few days, a hospital receives an overwhelming increase in the number of patients with food poisoning. How would a scientist respond to this increase in sick patients?
Answer:
Hey there!
A scientist would try to determine the cause of the food poisoning, and see if the people who got poisoned had anything in common, for example: they ate at the same restaurant, they are all people of a certain age, etc.
Let me know if this helps :)
Suppose we want to charge a flask with 2.4 g of sugar. We put the empty flask on a balance and it is determined to weigh 150 g. What is the weight we would expect to see on the balance when we're done adding the sugar?
Answer:
152.4 g
Explanation:
given that
Weight of sugar = 2.4 g
Weight if empty flask = 150 g
All we have to do is add the weight of the empty flask with the weight of the sugar.
The sugar would be put inside an empty flask. This means that it's weight with that of the empty flask would be their new weight. Thus, the new weight is
New weight = weight of empty flask + weight of sugar
New weight = 150 g + 2.4 g
New weight = 152.4 g
therefore, the new weight is 152.4 g.
I hope this helps you
152.4 g
Given:-
Weight of sugar = 2.4 g
Weight if empty flask = 150 g
Add the weight of the empty flask with the weight of the sugar.
The sugar would be put inside an empty flask. This means that it's weight with that of the empty flask would be their new weight. Thus, the new weight is as follows:-
[tex]New weight = weight of empty flask + weight of sugar\\New weight = 150 g + 2.4 g\\New weight = 152.4 g[/tex]
Therefore, the expected weight is 152.4 g.
To know more about:-
brainly.com/question/20630618
In a reversible reaction, the endothermic reaction absorbs ____________ the exothermic reaction releases.
A. None of these, endothermic reactions release energy
B. more energy than
C. the same amount of energy as
D. less energy than
Answer:
C. the same amount of energy as
Explanation:
Firstly, a chemical reaction can either absorb energy from its surroundings to occur or release energy into its surroundings as a product. The former and latter descriptions are called ENDOTHERMIC and EXOTHERMIC reactions respectively. An exothermic reaction is that which transfers energy, in form of heat, to its surroundings while an Endothermic reaction is that which absorbs energy (heat) from its surroundings.
However, a reversible reaction is that reaction in which the formation of products from reactants and reformation of the reactants from products occur simultaneously. Hence, the products of a reversible reaction can become the reactants and move in the opposite direction. For example:
Reversible reaction: A + B ⇆ C + D means;
A + B → C + D and;
C + D → A + B
In a case whereby the opposite reactions consist of an endothermic and exothermic reactions, the endothermic reaction absorbs the same amount of energy as the exothermic reaction releases.
According to the law of conservation of energy, no energy is lost during a reversible reaction. Hence, in order to achieve an equilibrium, the amount of energy absorbed by the endothermic reaction is the same as the amount of energy released in the opposite exothermic reaction.
In 1838 botanist Matthias Schleiden determined that all plants are composed of cells. In 1839, anatomist Theodor Schwann proposed that all animals are composed of cells. In 1855, biologist Rudolph Virchow added to Schleiden's and Schwann's observations and proposed that all living things are composed of cells. Which statement is also part of Virchow's cell theory?
Answer:
cells arose from preexisting cells
Explanation:
Rudolph Virchow is a German biologist that built on the work of other scientists such as Theodor Schwan to contribute his own quota to the development of the cell theory as it is currently known.
After several studies, Virchow rejected the idea of spontaneous generation and accepted the initially rejected idea of cell division. He earlier believed that cell division only takes place is some special type of cells and not in all cells.
Even though Virchow was not the first to bring the idea of cells arising from preexisting cells, he was the one that popularized the idea and added it to the earlier belief that all living organisms are made up of cells.
Answer:
B
Explanation:
describe melting of a solid
Calcula el %m/v de alcohol en una mezcla utilizada para la desinfección de manos formada por: 15 ml de agua (densidad=1g/ml), 105 g de etanol (densidad: 0,798 g/ml) y 4,5 gramos de jabón líquido (densidad= 1,5 g/ml)
Answer:
%m/v =70%
Explanation:
El %m/v es una unidad de concentración que se define como cien veces la división entre la masa de una sustancia (En gramos) y el volumen total en el que esta sustancia se encuentra (en mL).
En el problema, debemos hallar la masa de etanol (Alcohol) y el volumen total de la solución.
Masa alcohol:
Ya te la dan en el problema: 105g
Volumen solución:
Volumen agua: 15mL
Volumen etanol: 105g × (1mL / 0.798g) = 131mL
Volumen Jabón líquido: 4.5g × (1mL / 1.5g) = 3mL
Volumen: 15mL + 131mL + 3mL
149mL
Así, el %m/v de alcohol en la solución es:
%m/v = (105g / 149mL) × 100
%m/v =70%
A baseball has a mass of 135 grams and a softball has a mass of 270 grams. In which of the following situations would they have the same momentum? The baseball and softball are thrown at the same speed in the same direction.
Answer:
The baseball is thrown twice as fast as the softball in the same direction.
Explanation:
Which statement about Schrödinger’s theory of the atomic model is true?
Answer:
it explain odds of finding the position of an electron.
In human cells, a dynamic equilibrium exists between carbonic acid (H2CO3) and carbon dioxide (CO).
H2CO3(aq) = CO2() + H200
When a person exercises, the body's cells metabolize glucose to gain energy. This metabolism also causes an increase in the
concentration of carbon dioxide.
Le Chatelier's principle states that stresses applied to a system in dynamic equilibrium will cause the system to change in order to
alleviate those stresses. According to this principle, how would an increase in carbon dioxide concentration affect the system?
A. There would be a decrease in the concentration of carbonic acid.
В. There would be an increase in the concentration of glucose.
C. There would be an increase in the concentration of water.
There would be an increase in the concentration of carbonic acid.
D There would be an increase in the concentration of carbonic acid.
There would be an increase in the concentration of carbonic acid - this is how an increase in carbon dioxide concentration influences the system.
What is dynamic equilibrium?In chemistry, a dynamic equilibrium lives once a reversible reaction occurs. Substances transition between the reactants and products at equal rates, indicating there is no net change. Reactants and products exist formed at such a rate that the concentration of neither changes. It is a precise example of a system in a steady state. After a time, a reversible reaction in a closed system can get what we call a dynamic equilibrium.
The correct answer is option D.
To learn more about dynamic equilibrium refer to:
https://brainly.com/question/12920261
#SPJ2
Consider the following: Li(s) + ½ I₂(g) --> LiI(s) ΔH = –292 kJ. LiI(s) has a lattice energy of –753 kJ/mol. The ionization energy of Li(g) is 520 kJ/mol, the bond energy of I₂(g) is 151 kJ/mol, and the electron affinity of I(g) is –295 kJ/mol. Use these data to determine the heat of sublimation of Li(s).
Answer:
Heat of sublimation of Li(s) = 160.5 kJ/mol
Explanation:
Given that:
[tex]\mathtt{2Li(s) + \dfrac{1}{2} I_2(g) \to 2LiI(s)}[/tex]
ΔH = –292 kJ
The heat of formation for the above reaction = –292 kJ × 2 = -584 kJ/mol
[tex]\mathtt{Li^+_{(g)} + I^-_{(g)} \to LiI_{(s)}}[/tex]
The lattice energy of LiI(s) = -753 kJ/mol
[tex]\mathtt{Li(g)\to Li^+(g) + e^- }[/tex]
The ionization energy of LiI(s) = +520 kJ/mol
[tex]\mathtt{I_2_{(g)} \to 2I_{(g)} }[/tex]
The Bond Energy of I₂(g) = 151 kJ/mol
[tex]\mathtt{I_{(g)} + e^- \to I^-_{(g)}}[/tex]
The electron affinity of I(g) = -295 kJ/mol
Heat of sublimation: Sublimation is the process of changing of a solid matter into gas without passing through the liquid stage, Now, the molar heat of sublimation is the amount of energy that must be added to a mole of solid to turn it directly into a gas without any interference through the liquid phase provided the pressure is constant.
From the above reactions: The heat of sublimation of Li(s) can be calculated by the sum total of the following.
[tex]\mathtt{Li_{(s)} + \dfrac{1}{2} I_2_{(g)} \to LiI_{(s)} \ \ -292 kJ/mol} \\ \\\mathtt{I_{(g)} \to \dfrac{1}{2} I2(g) \ \ -75.5 kJ/mol} \\ \\ \mathtt{I^-(g) \to I(g) + e^- \ \ +295 kJ/mol} \\ \\ \mathtt{LiI(s) \to Li^+_{(g)} + I^-_{(g)} \ \ +753 kJ/mol} \\ \\ \mathtt{Li^+_{(g)} + e^- \to Li(s) \ \ -520 kJ/mol} \\ \\[/tex]
[tex]\mathtt{Li(s) \to Li(g)}[/tex] = (-292 +(-75.5)+295+753+(-520)) kJ/mol
[tex]\mathtt{Li(s) \to Li(g)}[/tex] = 160.5 kJ/mol
Heat of sublimation of Li(s) = 160.5 kJ/mol
Which of the following elements has a complete outer shell of electrons? A. Iron (Fe) B. Hydrogen (H) C. Neon (Ne) D. Nitrogen (N)
Answer:
The answer is Neon
Answer:
neon
Explanation:
neon has a complete outer 2n shell
which of the following molecules would you expect to be optically active
1. CCl2F2
2. 2-methyl butane
3. butan-2-ol
Answer:
waaaaaaaaaaqwwwwwwwwwwww
How many moles are present in 136 grams of MgCl2? 1.46 mol 1.43 mol 2.27 mol
Answer:
1.43 mol
Explanation:
compare the activity of sodium and iron with water and dilute acid
Answer:
Reactions of sodium with water and dilute acid
Sodium reacts explosively with dilute HCl(aq) to produce NaCl(aq) and H₂(g)
2Na (s) + 2HCl(aq) → 2NaCl(aq) + H₂(g)
Sodium reacts violently with cold water to produce NaOH(aq) and H₂(g)
2Na (s) + H₂O(l) → 2Na(OH)(aq) + H₂(g)
The produced hydrogen may become ignited and explode
Reactions of iron with water and dilute acid
Iron reacts very slowly with dilute acid to produce iron (II) chloride and hydrogen gas
Fe (s) + 2 HCl (aq) → FeCl₂ (aq) + H₂ (g)
Iron does not react with cold water. Iron reacts only with steam
Explanation:
What is ionic bond and explain it
Answer:
An ionic bond is a chemical bonding involving the attraction between oppositely charged ions
Explanation:
On the periodic table, elements from group 1 and 7 are attracted to each other and when they bond, it's called ionic bonding. This is because of their valence electrons and ions.
Answer:
Ionic bonding is a type of chemical bonding that involves the electrostatic attraction between oppositely charged ions, and is the primary interaction occurring in ionic compounds. It is one of the main types of bonding along with covalent bonding.
Tips for memorizing the first 20 elements of the periodic table?
Answer:
hydrant flying with balloon, balloon has lithp letting air out, bee: really yum balloon
= = = =
hydrogen helium lithium beryllium
be bore on the balloon, balloon pops, hydrant drops and makes a car bomb
= =
boron carbon
night row general gets hurt by car bomb nearby, that general gets off boat
=
nitrogen
wearing oxygen mask, mask is full of fluride gel, then he got neon teeth
= = =
oxygen fluorine neon
(try making a story out of the elements, use your imagenation)
I will give u tips to learn whole periodic table
1. Break down the table into sections
2. Spread out the memorisation process
3. Learn the elements in a song
4. Make none sense words made from element symbols
5. Use colour to learn element groups
6. Use mnemonic device to help remember the order of elements
I am sure this will be helpful for uuu
Explanation:
In the lab, Amanda has two solutions that contain alcohol and is mixing them with each other. She uses twice as much Solution A as Solution B. Solution A is 11% alcohol and Solution B is 18% alcohol. How many milliliters of Solution B does she use, if the resulting mixture has 320 milliliters of pure alcohol?
Answer:
1,103.47 milliliters
Explanation:
The total percentage of alcohol from solution A and solution B is 29. In a solution that is a mixture of solution A and B, the percentage of alcohol that would be contributed by solution A would be:--
11/29 x 100% = 37.93%
--while the percentage of alcohol that would be contributed by solution B would be:
18/29 x 100 = 62.07%
Hence, if a mixture of A and B has 320 milliliters of alcohol, the amount of alcohol contributed by B would be:
320 x 62.07/100 = 198.624 milliliters
Now, remember that solution B is 18% alcohol. This means that the 18% alcohol content of solution B is 198.624 milliliters. Thus, the total volume of solution B would be:
198.624 x 100/18 = 1,103.47 milliliters.
Therefore, the total milliliters of solution B Amanda used would be 1,103.47.
A student is worried about determining if a chemical is radioactive. Which
section of the SDS would the student refer to?
Product Information
Fire Fighting Methods
Physical and Chemical Properties
Hazards Identification
Answer:
Hazards Identification
Explanation:
A safety data sheet, SDS, is an informational document provided by the manufacturer or importer of a hazardous chemical detailing the chemical, physical, health, and environmental health hazards associated with the chemical as well as safety precautions in handling the chemical.
Some of the sections in the SDS include:
Product Information: It identifies the chemical as well as its recommended uses. The contact information of the manufacturer is also provided.
Fire fighting methods: It gives measures and guidelines necessary for fighting a fire caused by the chemical.
Physical and chemical properties: states the physical and chemical properties of the chemical substance such as: appearance, odor, pH, melting/freezing point, boiling point and boiling range, flammability, etc.
Hazards identification: states the hazards of the chemical and the necessary warnings regarding the hazards. Some of the information provided include: hazard classification of the chemical (for example flammable liquid, oxidizing gases,explosives, etc), signal word, hazard statement (for example radioactive), pictograms, precautionary statements, etc.
From the above information provided, the student should refer to the hazards identification section.
What happens when two objects when they are brought closer together The mass of both objects decrease The mass of both objects increase The gravitational force between them decreases The gravitational force between them increases
Answer:
The correct option is
The gravitational force between them increases
Explanation:
According to Newton's law of universal gravitation states that the force of attraction between two bodies is directly proportional to the product of the masses of the bodies and inversely proportional to the square of the distance of their centers from each other.
The formula for universal gravitation is given as follows;
[tex]F_{1} = F_{2} =G \times \dfrac{m_{1} \times m_{2}}{r^{2}}[/tex]
Where;
F₁, and F₂ = The gravitational forces of attraction on each mass
G = The gravitational constant
m₁ = The mass of one body
m₂ = The mass of the body
r = The distance between the centers of the two bodies
Therefore, the gravitational force of attraction on each object is inversely proportional to the as the distance between the centers of the two bodies
When the distance between the centers of the two bodies decreases, the two objects are brought closer together, the gravitational force of attraction between them increases.
Answer:
Gravitational force between two objects of masses m1/m2
Explanation:
is defined by Gm1xm2/r^2, where G is a universal constant, and r is the distance between the masses. This shows you why B is wrong; it would increase. Also, A is not a good choice, as shown. In the case of B, it would increase by say, 2/1 to 4/1 by doubling ones mass. In C's case the bottom would decrease on the fraction alot (square) if they were moved closer, thus the force would be greater.
Explanation:
in other words the answer is The gravitational force between them increases
3. What amount of
space is taken up by a rock that weighs 150 milligrams, and
has a density of 30 mg/ml? (Express your answer in Liters)
Hey there!:
Density = 30 mg/mL
Mass = 150 mg
Volume = ??
Therefore:
D = m / V
30 = 150 / V
V = 150 / 30
V = 5.0 mL
converts volume into liters :
5.0 mL / 1000 => 0.005 L or 5.0 x 10⁻³ L
Hope this helps!
What is the term for the belief that one's own culture is superior to other
cultures?
O A. Cultural behavior
O B. Cultural competence
C. Cultural relativism
D. Cultural absolutism
Cultural absolutism is the term for the belief that one's own culture is superior to other cultures.
What is cultural absolutism?Cultural absolutism is one of the perspectives which is common in anthropology, but it can also be applied to non-scientific thoughts also. It assumes that there is a set of universal values which are objectively valid in every situation.
Today, pure cultural absolutism is seen as a harmful effect of ethnocentrism focusing on the belief that one's own culture is superior and the practice of holding other's cultures to the standard of our own. However, purely relativist anthropologists have also been critiqued for going too far, by denying any common humanity and being too lenient towards morally questionable practices. Contemporary approaches try to find a balance between the universal values, such as human dignity, and a more inclusive and relativistic side of culture.
Learn more about cultural absolutism,here:
https://brainly.com/question/12391889
#SPJ2
Which of the following is an example of matter? Question 5 options: A) The air around you B) Your thoughts C) Radio waves D) Heat from a fire
Answer:
the air around you
Explanation:matter is physical like the particles in the air or the oxygen in the air. so rocks, earth the sun, anything you can touch is matter. even gasses.
0.024 is how many significant figures?
Answer:
24×10^-3Explanation:
[tex]Move \: the\:decimal \:point\:,\\3 \:times\:to\:the \:right = 24\\\\When \:the\:decimal\:point \: moves\\\:to\:the \:right\:it\:becomes\:a \:negative\:power\\\\0.024= 24 \times 10^-^3[/tex]
1. Which material had the highest rate of absorption? What can you conclude about the rate
of absorption in the natural world? How might this influence climate regions?
it might be porous materials
Answer:
Air had the highest rate of absorption. Air absorbs most of the suns heat and sun rays and air can move to different areas which are warm and colder.
Explanation:
Select the correct answer from each drop-down menu. At chemical equilibrium, the amount of because .
Answer:
The answer that completes the question are in BOLD:
At chemical equilibrium, the amount of PRODUCT AND REACTANT REMAIN CONSTANT because the RATES OF THE FORWARD AND REVERSE REACTIONS ARE EQUAL.
Explanation:
In a reversible chemical reaction, an equilibrium is said to be achieved when the rates of the forward reaction is equal to that of the reverse reaction. A reversible reaction is one in which products are formed from reactants simultaneously with the formation of reactants from products.
The combination of two or more substances called REACTANTS gives rise to another substance called PRODUCT, which can in turn give rise to Reactants again. With time, the rate at which the reactants give rise the products, which is called the FORWARD REACTION will be equal to the rate at which the products give rise to the reactants, which is called REVERSE REACTION. At this point, the chemical reaction is said to be in a STATE OF EQUILIBRIUM.
When the rate at which both reaction occurs becomes equal i.e. at an equilibrium state, the concentration of both the reactants and the products becomes constant i.e. no longer changes. Hence, the amount of the reactants forming the products is the same as the amount of products forming the reactants.
N.B: At chemical equilibrium, the amount of the reactants and products does not necessarily equals zero (0). It simply means that there is no net change in the concentration/amount of both reactants and products.
Which is the correct definition of metallic bonding? Select one: a. an array of positive ions in a sea of electrons b. complete transfer of valence electrons c. atoms share electrons to to be stable
Answer:
I believe it's A) an array of positive ions in a sea of electrons
