The following compound can be identified as

In the original solution you have the mixture of a weak acid (Hypochlorous acid) and its conjugate base (Sodium hypochlorite). That is a buffer.

The barium hydroxide will react with hypochlorous acid. If this reaction cause the complete reaction of hypochlorous acid, the buffer break its capacity and the pH change in several units. In this case:

The addition of barium hydroxide will raise the pH slightly because the buffer still working.

The initial moles of those species are:

Hypochlorous acid:

[tex]1L * \frac{0.370mol}{1L} = 0.370 moles[/tex]

Sodium hypochlorite:

[tex]1L * \frac{0.493mol}{1L} = 0.493 moles[/tex]

Now, a strong acid as barium hydroxide (Ba(OH)₂) reacts with a weak acid as hypochlorous acid (HClO) as follows:

Ba(OH)₂ + 2HClO → Ba(ClO)₂ + 2H₂O

For a complete reaction of 0.092 moles of barium hydroxide are required:

[tex]0.092 moles Ba(OH)_2*\frac{2mol HClO}{1molBa(OH)_2} = 0.184 moles HClO[/tex]

As there are 0.370 moles, the moles of HClO after the reaction are:

0.370 moles - 0.184 moles = 0.186 moles of HClO will remain

As you still have hypochlorite and hypochlorous acid you still have a buffer.

Thus, the pH will raise slightly because the amount of acid is decreasing and slightly because the buffer can keep the pH.

Learn more about buffers in:

https://brainly.com/question/24302294

Answer:

A reaction is the time that is required for a chemical reaction to go essential to completion

Answer:

Both have solutions in the  graduated cylinder.

Explanation:

Recording the amount of alcohol used as the difference between two masses is the wrong method used for measuring tert-butyl alcohol for the experiment.  For measuring tert-butyl alcohol for this experiment, the student has to measure the two masses when both the graduated cylinders has solution of tert-butyl alcohol not when one of it is empty (having no tert-butyl alcohol ).

The wrong aspect is that the liquid didn't need to be weighed. Instead the volume should have been recorded with the aid of the graduated cylinder.

This is a cylinder with marked readings and is used to measure the volume of liquids in the laboratory.

The graduated cylinder will accurately measure the amount of  alcohol used due to it being volatile and the mass fluctuating during the measurement.

Read  more about Graduated cylinder here https://brainly.com/question/24869562

Answer: Hợp chất CTHH 0 °C 10 °C 20 °C 30 °C 40 °C 50 °C 70 °C

Actini(III) hydroxide Ac(OH)3   0,0022    

Amonia NH3 1176 900 702 565 428 333 188

Amoni azua NH4N3 16  25,3  37,1  

View 42 more rows  

                    hehe

Answer:

22.1

Explanation:

Step 1: Calculate the number of formula units of lithium nitrate

A 5.08 L solution contains 2.68 × 10²¹ formula units per liter.

5.08 L × 2.68 × 10²¹ formula units/1 L = 1.36 × 10²² formula units

Step 2: Calculate the number of nitrate ions

Lithium nitrate dissociates completely in water according to the following equation.

LiNO₃(aq) ⇒ Li⁺(aq) + NO₃⁻(aq)

The molar ratio of LiNO₃ to NO₃⁻ is 1:1. The number of nitrate ions is 1/1 × 1.36 × 10²² = 1.36 × 10²².

Then,

log (1.36 × 10²²) = 22.1

The number of nitrate ions are present in the following aqueous solution is 13.6x10²¹, and log(base 10) value of this is 22.2.

Those salts which are completely dissociate into their ions in the solution form will known as strong electrolyte.

Lithium nitrate is a strong electrolyte and it shows complete dissociation as:

LiNO₃ → Li⁺ + NO₃⁻

Given that,

1 liter of solution containing = 2.68 x 10²¹ formula unit

5.08 L of solution containing = 5.08 x 2.68 x 10²¹ = 13.6x10²¹ formula unit

So, number of nitrate ion in given solution = 13.6x10²¹ formula unit

Log(13.6x10²¹) = 22.1

Hence, required values are 13.6x10²¹ and 22.1.

To know more about strong electrolytes, visit the below link:
https://brainly.com/question/5547666

Answer:

deuterium is heavier isotope of hydrogen need

high weight of atom will lead to higher boiling point

Answer:

1. Because the rules will keep you safe it prevents you from getting hurt.

2.i) don't taste chemical

ii) Always wear protective gears

iii) be careful with tool

iv) wear protective gloves

Explanation:

help everyone get out quickly

Answer:

The degree of compactness of a substance

Answer:

(i). C6H2COOH and Na2CO3(aq)

observation: Bubbles of a colourless gas (carbon dioxide gas)

(ii) CH3CH2CH2OH and KMnO4 /H

observation: The orange solution turns green.

[This is because oxidation of propanol to propanoic acid occurs]

(iii) CH3CH2OH and CH3COOH + conc. H2SO4

observation: A sweet fruity smell is formed.

[This is because an ester, diethylether is formed]

(iv) CH3CH = CHCH3 and Br2 /H2O

observation: a brown solution is formed.

The solid that require the greatest energy input to melt by mass is the option;

Covalent network

Reason for the above answer is as follows;

The elementary particles of a solid are held together by bonds that require

an input of energy to unlock, and once broken, the particles are then able

to change location within their containing vessels with less restrictions

Types of bonds

a) Soluble in water b) Low melting point, b) Conduct electricity

a) High melting point temperature b) Non conductive of electricity c) Not soluble in water

a) High melting point temperature b) The liquid state and solution

conducts electricity c) Soluble in water

a) Low melting point b) Normally in the gaseous or liquid state b) Not water soluble

Therefore, the covalent network, and the solids ionic compounds require the most energy to melt, however, the strength of the ionic bond in an ionic compound is a factor the charges present and the sizes of the atom, while

the covalent network solid, are combined to form essentially as a single

molecule and therefore require the greatest heat energy input break the bonds of the molecule down in order to melt

Learn more about the properties of the different types of bonds here;

https://brainly.com/question/13510199

https://brainly.com/question/21628972

https://brainly.com/question/14823280

Answer:

A. tungsten

Explanation:

Tungsten is a material which high melting point ie. does not melt easily incase of high temperature

Answer:

option(A):Tungsten

Explanation:

tungsten has highest melting point.

Answer:

[H₃O⁺] = [H⁺] = 10^-pH = 10⁻¹°⁸⁶ = 0.0138M in [H⁺]  

Explanation:

By definition pH = -log[H⁺] => [H⁺] = 10^-pH = 10⁻¹°⁸⁶ = 0.0138M in [H⁺]

Using your calculator ... I am using a TI-30XA scientific calculator.

Depending on the calculator, the answer may show as 0.0138, or  1.38x10⁻², or 1.38E-2 (=1.38 x 10⁻²). It is the user's job to insert dimensional units into answer of interest =>  0.0138M, or  1.38 x 10⁻²M, or 1.38E-2M.

1.38E-2 which is 1.38 x 10⁻².

Answer:

Methane and chlorine

If a mixture of methane and chlorine is exposed to a flame, it explodes - producing carbon and hydrogen chloride. This is not a very useful reaction! The reaction we are going to explore is a more gentle one between methane and chlorine in the presence of ultraviolet light - typically sunlight. This is a good example of a photochemical reaction - a reaction brought about by light.

CH4+Cl2+energy→CH3Cl+HCl(3.4.2)

The organic product is chloromethane. One of the hydrogen atoms in the methane has been replaced by a chlorine atom, so this is a substitution reaction. However, the reaction doesn't stop there, and all the hydrogens in the methane can in turn be replaced by chlorine atoms.

Substitution reactions happen in which hydrogen atoms in the methane are replaced one at a time by chlorine atoms. You end up with a mixture of chloromethane, dichloromethane, trichloromethane and tetrachloromethane.

I hope this help you!:)

Explanation:

Answer:

See explanation

Explanation:

The IUPAC name of aspirin is 2-Acetoxybenzoic acid. It is composed of an acetoxy moiety and a benzoic acid moiety.

The compound can be hydrolysed under prolonged storage conditions to yield acetic acid which causes the vinegar like odour.

Also, one of the products of this hydrolysis bears a phenol group which reacts with FeCl3 to give a purple color.

Answer:

Each molecule of O2 is made up of 2 oxygen atoms. So 1 mole of O2 molecules is made up of 2 moles of oxygen atoms. Therefore 1 mole of oxygen gas contains 2 moles of oxygen atoms. And 0.4 moles of oxygen gas contains 0.8 moles of oxygen atoms.

There are 0.8 moles of oxygen atoms in 0.4 moles of oxygen gas.

Oxygen gas (O₂) consists of two oxygen atoms bonded together. Therefore, to determine the number of moles of oxygen atoms present in a given amount of oxygen gas, we can simply multiply the number of moles of oxygen gas by the number of oxygen atoms per molecule, which is 2.

Given that we have 0.4 moles of oxygen gas, we can calculate the number of moles of oxygen atoms as follows:

Number of moles of oxygen atoms = Number of moles of oxygen gas × Number of oxygen atoms per molecule

= 0.4 moles × 2

= 0.8 moles

Therefore, there are 0.8 moles of oxygen atoms present in 0.4 moles of oxygen gas.

This calculation is based on the stoichiometry of oxygen gas, which indicates that each molecule of O₂ contains two oxygen atoms. By considering the mole ratio between oxygen gas and oxygen atoms, we can determine the number of moles of oxygen atoms in a given quantity of oxygen gas.

To learn more about moles, here

https://brainly.com/question/34302357

#SPJ2

Answer:

the metal become red hot

Best practices for fume hoods: work 25 cm inside, organize items to one side, use raised ledge; avoid open sash and quick movements.

Laboratory fume hoods must be used safely. Workers should operate at least 25 cm within the hood to preserve ventilation and avoid dangerous chemicals. Place things on one side of the hood to preserve ventilation and prevent clogging.

A raised ledge on the rear of the hood prevents things from falling in and impeding airflow. Avoid fully opening the sash to maintain ventilation and containment. Fast, rapid motions can interrupt airflow, so prevent them. These practises guarantee the fume hood contains harmful compounds, making the lab safer. Therefore, option (B), (D) and (E) are correct.

Learn more about fume hood, here:

https://brainly.com/question/29069541

#SPJ12

Using boyles law

[tex]\boxed{\sf v\propto \dfrac{1}{p}}[/tex]

[tex]\\ \sf\longmapsto P_1V_1=P_2V_2[/tex]

[tex]\\ \sf\longmapsto P_2=\dfrac{P_1V_1}{V_2}[/tex]

[tex]\\ \sf\longmapsto P_2=\dfrac{2.8\times 1.5}{0.92}[/tex]

[tex]\\ \sf\longmapsto P_2=\dfrac{4.2}{0.92}[/tex]

[tex]\\ \sf\longmapsto P_2=4.56atm[/tex]

[tex]\\ \sf\longmapsto P_2\approx 4.6atm[/tex]

Answer:

[tex]\boxed {\boxed {\sf 4.6 \ atm}}[/tex]

Explanation:

We are asked to find the new pressure given a change in volume. We will use Boyle's Law, which states the volume of a gas is inversely proportional to the pressure. The formula for this law is:

[tex]P_1V_1= P_2V_2[/tex]

Initially, the gas occupies 1.5 liters at a pressure of 2.8 atmospheres.

[tex]1.5 \ L * 2.8 \ atm = P_2V_2[/tex]

The volume is changed to 0.92 liters, but the pressure is unknown.

[tex]1.5 \ L * 2.8 \ atm = P_2* 0.92 \ L[/tex]

We are solving for the final pressure, so we must isolate the variable P₂. It is being multiplied by 0.92 liters. The inverse operation of multiplication is division, so we divide both sides by 0.92 L.

[tex]\frac {1.5 \ L * 2.8 \ atm}{0.92 \ L} = \frac{P_2* 0.92 \ L}{0.92 \ L}[/tex]

[tex]\frac {1.5 \ L * 2.8 \ atm}{0.92 \ L}= P_2[/tex]

The units of liters cancel each other out.

[tex]\frac {1.5 * 2.8 \ atm}{0.92 }=P_2[/tex]

[tex]\frac {4.2}{0.92} \ atm= P_2[/tex]

[tex]4.565217391 \ atm = P_2[/tex]

The original measurements of pressure and volume have 2 significant figures, so our answer must have the same. For the number we calculated, that is the tenths place. The 6 in the hundredth place tells us to round the 5 up to a 6.

[tex]4.6 \ atm \approx P_2[/tex]

The pressure is approximately 4.6 atmospheres.

Answer:

Al + MnO4- + 2H2O → Al(OH)4- + MnO2

Explanation:

First of all, we out down the skeleton equation;

Al + MnO4- → MnO2 + Al(OH)4-

Secondly, we write the oxidation and reduction equation in basic medium;

Oxidation half equation:Al + 4H2O + 4OH- → Al(OH)4- + 4H2O + 3e-

Reduction half equation:MnO4- + 4H2O + 3e- → MnO2 + 2H2O + 4OH-

Thirdly, we add the two half reactions together to obtain:

Al + MnO4- + 8H2O + 4OH- + 3e- → Al(OH)4- + MnO2 + 6H2O + 3e- + 4OH-

Lastly, cancel out species that occur on both sides of the reaction equation;

Al + MnO4- + 8H2O→ Al(OH)4- + MnO2 + 6H2O

The simplified equation now becomes;

Al + MnO4- + 2H2O → Al(OH)4- + MnO2

Answer:

75

Explanation:

is the answer for your question

Answer:

0

Explanation:

pure elements will always possess an oxidation number of 0, regardless of their charge.

Answer:

D.) 0

Explanation:

I got it correct on founders edtell

Answer:

True

Explanation:

The value of the mole is equal to the number of atoms in exactly 12 grams of pure carbon-12. 12.00 g C-12 = 1 mol C-12 atoms = 6.022 × 1023 atoms • The number of particles in 1 mole is called Avogadro's Number (6.0221421 x 1023).

Answer:

the relationship between independent and dependent variable

Explanation:

A straight line or linear graph is one of the ways to represent a given data. It shows the relationship between two given set of data; one called the independent variable is plotted on the x-axis (horizontal) while the other called the dependent variable is plotted on the y-axis (vertical).

The straighter the line is, the stronger the relationship between the two variables and vice versa. Hence, the straight line in the graph represents the relationship between independent and dependent variable.

Answer:

D) these all have the same boiling point

Answer:

D. -80m/s^2

Explanation:

V = u + at

5 = 65 + a (0.75)

0.75a = -60

a = -60/0.75

a = -80m/s^2

Therefore, is decelerating at 80m/s^2

Answer:

[tex]\boxed {\boxed {\sf D. \ 80 \ m/s^2 \ down}}[/tex]

Explanation:

We are asked to find the acceleration of a skydiver. Acceleration is the change in velocity over the change in time, so the formula for calculating acceleration is:

[tex]a= \frac{v_f-v_i}{t}[/tex]

The skydiver was initially traveling 65 meters per second, then he slowed down to a final velocity of 5 meters per second. He slowed down in 0.75 seconds.

[tex]\bullet \ v_f = 5 \ m/s \\\bullet \ v_i= 65 \ m/s \\\bullet \ t= 0.75 \ s[/tex]

Substitute the values into the formula.

[tex]a= \frac{ 5 \ m/s - 65 \ m/s}{0.75 \ s}[/tex]

Solve the numerator.

[tex]a= \frac{-60 \ m/s}{0.75 \ s}[/tex]

Divide.

[tex]a= -80 \ m/s^2[/tex]

The acceleration of the skydiver is -80 meters per second squared or 80 meters per second squared down. The skydiver is slowing down or decelerating, so the acceleration is negative or down.

A cell is the structural and fundamental unit of life. The study of cells from its basic structure to the functions of every cell organelle is called Cell Biology. Robert Hooke was the first Biologist who discovered cells

two types of cell

1) Prokaryotes

2) Eukaryotes

Characteristics of Cells

1) Cells provide structure and support to the body of an organism.

2) The cell interior is organised into different individual organelles surrounded by a separate membrane.

3) The nucleus (major organelle) holds genetic information necessary for reproduction and cell growth

[tex]hope \: its \: helpful \: to \: you \: please \: mark \: me \: a \: brainliest[/tex]

A cell is defined as the fundamental, structural and functional unit of all life.

have a great day

God bless you

water is known as the mixture

Answer:

iv. Iron

water is not a mixture

hydrogen is the simplest element

air is pure