Answer:
Positive
Explanation:
How do you think you results would be affected if using K2Cr2O7/H2SO4 as the oxidizing agent instead of KMnO4
Answer:
Due to weak oxidizing agent.
Explanation:
In my opinion the results would be affected if using K2Cr2O7/H2SO4 as the oxidizing agent instead of KMnO4 because K2Cr2O7/H2SO4 is weak oxidizing agent as compared to KMnO4. An oxidizing agent is a substance that has the ability to oxidize other substances means that accept their electrons so that's why the results of strong oxidizing agent is different than weak oxidizing agent.
The results of the reaction will be affected due to the difference in :
Oxidizing agent strength
The use of K₂Cr₂O7 / H₂SO₄ which is weaker oxidizing agent in the reaction will produce a different result from the use of KmnO₄ which is a stronger oxidizing agent.
This is because stronger oxidizing agents in reaction readily accept electrons from reactants while weaker oxidizing agents do not readily accept electrons from substances reacting in the reaction.
Therefore we can conclude that The results of the reaction will be affected due to the difference in oxidizing agent strength
Learn more : https://brainly.com/question/16450420
Although your question is incomplete a general solution is provide within the scope of your question
 Help ASAP only right answers only no spam don’t answer if you don’t know
Answer:
NO. 10.
performed experiments
NO. 11.
Inference
Explanation:
No 10.
in order to prove that Mary Mellon was in fact infected by typhoid proper experiments needs to be carried out.
No. 11
inference means an assumption due to the situation.
Question 1 of 10 What would be a good description of what activating prior knowledge means? O
A. Prior to reading, look at the end of the book or article.
O B. Before you read, recall knowledge you already have about the subject.
O C. Before you read, think about what you hope to learn.
O D. Before reading, find other material that is similar to what you are going to read
Answer:
B
Explanation:
Because activating prior knowledge means getting what you already know on the subject.
I am doing a lab and I am not sure how to calculate the concentration of the chemical formulas used in the lab. Would I need to use the 15ml and add it to the 10 ml of the first solution to find the concentration. Thank you
Answer:
C = m/V
Explanation:
In order to calculate the concentration of a mixture you would need to use the formula for concentration, which is the following...
C = m/V
In this formula C is the concentration, m is the mass of the compound that is being added and mixed into the solution, and V is the total volume of the mixture. The mass of m is in terms of number of moles. Therefore, we would need more information in order to calculate the actual concentration of the mixture that you are trying to find in this scenario. Using the formula above should be enough using the values that you have in your actual workbook.
calculate the final pressure of a gas that is expanded from 725cm³ at 30C and 1.19 atm to 1.12cm³ at 43C
Answer:
Final pressure, P2 = 1088.89 atm
Explanation:
Given the following data;
Initial volume, V1 = 725 cm³
Initial temperature, T1 = 30°C
Initial pressure, P1 = 1.19 atm
Final volume, V2 = 1.12 cm³
Final temperature, T2 = 43°C
To find the final pressure (P2), we would use the combined gas law.
Mathematically, the combined gas law is given by the formula;
[tex] \frac {PV}{T} = k [/tex]
[tex] \frac {P_{1}V_{1}}{T_{1}} = \frac {P_{2}V_{2}}{T_{2}} [/tex]
Substituting into the formula, we have;
[tex] \frac {1.19*715}{30} = \frac {P_{2}*1.12}{43} [/tex]
[tex] \frac {850.85}{30} = \frac {P_{2}*1.12}{43} [/tex]
[tex] 28.3617 = \frac {P_{2}*1.12}{43} [/tex]
Cross-multiplying, we have;
[tex] 28.3617 * 43 = 1.12P_{2} [/tex]
[tex] 1219.5531 = 1.12P_{2} [/tex]
[tex] P_{2} = \frac {1219.5531}{1.12} [/tex]
Final pressure, P2 = 1088.89 atm
What is the net ionic equation for the following? :)
1. Mg (s) + Na2CrO4 (aq) -->
2. K (s) + Cd(NO3)2 (aq) -->
Answer:
1. Mg (s) + 2Na+(aq) → 2Na(s) + Mg²⁺(aq)
2. 2K(s) + Cd²⁺(aq) → 2K⁺(aq) + Cd(s)
Explanation:
The net ionic equation of a reaction express only the chemical species that are involved in the reaction:
1. Mg (s) + Na2CrO4 (aq) → 2Na + MgCrO4(aq)
The ionic equation:
Mg (s) + 2Na+(aq) + CrO4²⁻ (aq) → 2Na + Mg²⁺ + CrO4²⁻(aq)
Subtracting the ions that don't change:
Mg (s) + 2Na+(aq) → 2Na + Mg²⁺
2. 2K(s) + Cd(NO3)2(aq) → 2KNO3(aq) + Cd(s)
The ionic equation:
2K(s) + Cd²⁺(aq) + 2NO3⁻(aq) → 2K⁺(aq) + 2NO3⁻(aq) + Cd(s)
Subtracting the ions that don't change:
2K(s) + Cd²⁺(aq) → 2K⁺(aq) + Cd(s)Which statement is not true about the periodic table?
A. Elements in the same family have the same number of protons.
B. An element of the table is represented by a box with a symbol in it.
C. Elements in the same period of the periodic table have the same
number of electron shells.
D. It is organized by atomic number.
Elements in the same family have the same number of protons. This statement is not true about the periodic table. Therefore, option A is correct.
What is periodic table ?The chemical elements are arranged in rows and columns in the periodic table, sometimes referred to as the periodic table of the elements. It is frequently used in physics, chemistry, and other sciences and is frequently regarded as a symbol of chemistry.
The table can be used by scientists to anticipate chemical reactions, study trends in the periodic properties of certain elements, and speculate on the properties of yet-to-be-discovered elements. The elements are arranged in the contemporary periodic table according to their atomic numbers and periodic characteristics.
The periodic table has changed to represent more than 150 years of chemical and physics research and development.
Thus, option A is correct.
To learn more about the periodic table, follow the link;
https://brainly.com/question/11155928
#SPJ2
classify each of the following solids as ionic,metallic, molecular, network (covalent)or amorphous?
1) Tetra phosphorous deicide(P4O10)
2)Graphite
3) Ammonium phosphate (NH4)3po4
4) Brass
5)SiC
6)Rb
7)l2
8)LiBr
9)P4
10) Plastic
11)Si
Answer;
P4O10 - molecular solid
Graphite - network solid
Ammonium phosphate - ionic
Brass - metallic
SiC - network solid
Rb- metallic
I2 - molecular
LiBr- ionic
P4 - molecular
Plastic - amorphous
Si - network
Explanation:
An ioinc solid is made up of a pair of oppositely charged ion held together by electrostatic interaction between the bonding species.
A covalent solid is a solid in which the atoms involved in the solid are bonded together by covalent bonds. Covalent solids are also molecular.
Metals are held together by interaction of metal ions and a sea of electrons. This is called the metallic bond.
A network solid is composed of covalently bonded atoms that repeat itself in a definite manner. E.g SiC
I am having trouble converting :(
Answer:
For the first question, to determine the total number of molecules of nitrogen dioxide, first make use of the molar mass of the nonpolar compound and then use that to find the total number of moles and then subsequently after make use of the ratio for the Avogadro's number to determine the total number of molecules of this compound.
For the final question, do the inverse, where we make use of the molecules of the compound and then use Avogadro's number to determine the moles of the compound and then use the same molar mass of the compound to determine the grams of the Nitrogen Dioxide.
Calculate the molarity of 198 g of barium iodide (Bal2) in 2.0 l of solution
Answer: The molarity of 198 g of barium iodide [tex](BaI_{2})[/tex] in 2.0 L of solution is 0.253 M.
Explanation:
Given: Mass = 198 g
Volume = 2.0 L
Molarity is the number of moles of solute present in liter of a solution.
Moles is the mass of a substance divided by its molar mass. So, moles of barium iodide (molar mass = 391.136 g/mol) is calculated as follows.
[tex]Moles = \frac{mass}{molar mass}\\= \frac{198 g}{391.136 g/mol}\\= 0.506 mol[/tex]
Now, molarity is calculated as follows.
[tex]Molarity = \frac{moles}{Volume (in L)}\\= \frac{0.506 mol}{2.0 L}\\= 0.253 M[/tex]
Thus, we can conclude that the molarity of 198 g of barium iodide [tex](BaI_{2})[/tex] in 2.0 L of solution is 0.253 M.
A television wave has a_____
wavelength than an infrared wave
Answer:
Longer
Explanation:
:)
A 20.0 mL solution of NaOH is neutralized with 24.1 mL of 0.200 M HBr. What is the concentration of the original NaOH solution
Answer:
0.241 M
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
HBr + NaOH —> NaBr + H₂O
From the balanced equation above,
The mole ratio of acid, HBr (nₐ) = 1
The mole ratio of base, NaOH (n₆) = 1
Finally, we shall determine the concentration of the NaOH solution. This can be obtained as follow:
Volume of base, NaOH (V₆) = 20 mL
Volume of acid, HBr (Vₐ) = 24.1 mL
Concentration of acid, HBr (Cₐ) = 0.2 M
Concentration of base, NaOH (C₆) =?
CₐVₐ / C₆V₆ = nₐ/n₆
0.2 × 24.1 / C₆ × 20 = 1/1
4.82 / C₆ × 20 = 1
Cross multiply
C₆ × 20 = 4.82
Divide both side by 20
C₆ = 4.82 / 20
C₆ = 0.241 M
Therefore, the concentration of the NaOH solution is 0.241 M
Help me please please
where is the directions here?
I cannot answer this if no directions
Select the correct text in the passage.
Explanation:
Oceans can influence weather and climate. For example, cities located near large water bodies like oceans tend not to have extreme climates
hey i have personal question! um is it safe to use a shower head / faucet for a pleasure thing.. like will it lead me to std’s/sti’s….? infections? will it harm anything? help me pls!
Answer: Dont let the water get inside your private area because it can lead to you washing out the healthy bacteria in your private area !
Explanation:
Also dont do it because you dont know if your water is clean enough for that ..
14. Which of the following alkanols on oxidation is most likely to yield the
compound below?
CHICHICOOON
.CO
(A) Butanol (B) Propan-2-ol(2-methylbutan-1-ol (D) 2-methylpropan-1-
ol (E) 2-methylpropan-2-ol.
Answer:
A
Explanation:
I think that is the ans but am not sure
Answer:
2-methylpropan-1-ol.
Explanation:
[tex]{ \tt{CH _{3}CH(CH _{3})CH _{2}OH}}[/tex]
Hands moving on a battery-operated clock is an example of what kind of
energy conversion?
A. Heat energy being converted to gravitational potential energy
B. Gravitational potential energy being converted to heat energy
C. Chemical potential energy being converted to kinetic energy
D. Kinetic energy being converted to chemical potential energy
Answer:
Chemical potential energy being converted to kinetic energy
Explanation:
Calculate the numerical Kc value for the following reaction if the equilibrium mixture contains 0.51 M CO , 0.30 M H2 , 1.8 M CH4 , and 2.0 M H2O.
CO(g) + 3H2 (g) ⇌ CH4 (g) + H2O (g)
Show work
Answer:
uh i think this is the answer
Explanation:
AYUDA DOY CORONA
Numero masico del oro
Answer:
huh what?
Explanation:
Is 196,96657 u
I hope I've helped :)
¿Cuáles son las características del átomo de carbono?
what is the difference between chemistry with other natural science
Answer:
Hi!
chemistry;
unlike others, is more about atomic structure.
HAVE A NİCE DAY
Explanation:
GREETİNGS FROM TURKEY ツ
Answer:
CHEMISTRY means the study of matter and the different chemical reactions that any substance goes through, like, matters composition, structure, shape, state, etc. while geology, biology and physics are the other branches of science and chemistry acts as a bridge between physics and geology with biology.
hope it helps
have a nice day
2002040_MIJ COMP SCI 1_SEM 1 CR_PY
The three main types of scientific investigations are descriptive, comparative, and experimental. Which components
are included in all three types of investigations?
a scientific question
an independent variable
a dependent variable
a procedure
a control group
a conclusion
Answer:
a scientific question
Procedure
Conclusion.
Explanation:
Scientific investigation is usually carried out to explain and give answers to natural phenomenon. Now, this scientific investigation is performed through the three main types as described in the question.
With that being said, the most common parts of all types of investigation are :
1. Scientific question: In this stage, questions are usually asked on the basis of observation made which could be answered.
2. Procedure: In this stage, the dimension of the steps are followed to answer and test the scientific question.
3. Conclusion: This is the primary aim that we check when done with our sample values
Why is the amount of gas collected in one of the test tubes in Activity 1.7 double of the amount collected in the other? Name this gas.
For class 10th
Answer:
Water contains two parts of hydrogen and one part oxygen. Therefore, during the electrolysis of water the amount of hydrogen has collected in one of the test tubes is double than that of the oxygen produced and collected in the other last tube.
Which of the following elements is the largest in size?
A) O
B) He
C) K
ODH
Answer:
C) K
Explanation:
K has an electron configuration of 2.8.8.1
The number of Atoms present in one mole of an element is equal to Avogadro Number. Which One Of the Following contains the greatest number of Atoms? (1)4g He (2)46g Na (3)0.40g Ca (4) 12g He
Answer:
Thus, the element containing the greatest number of atoms is 12 g He. Thus, the correct option is (4) 12 g He. Note: The number of atoms of a compound is Avogadro's number for 1 mole of compound. The number 6.022×1023 is known as Avogadro's number.
Explanation:
(4)✔️ 12 g He
please follow me.
iammallikaAnswer:
120gram I think so this is the answer if the answer is correct plz mark me as brainliest.
A new element R shows chemical properties similar to the element sodium. What is the correct formula of a compound formed with R and sulfur?
R₂S
RS₂
RS
R₂S₂
Answer:
R2S this is because sodium has one 1 valence and sulfur has valence of 2 so when they combine theyinterchange their valence
1. Which of the following species exhibit tetrahedral geometry?
a. CCl4 b. PCI5 c. NH3 d. CO2
2. Which statement correctly describes the Valence Shell Electron Pair Repulsion (VSEPR) Theory? The valence electron pairs are__________.
a. The valence electron pairs are given by the group number in the periodic table.
b. The valence electron pairs are the outermost electrons of the atom that areinvolved in the bonding.
c. The valence electron pairs repel one another and tend to stay as far apart aspossible.
d. The valence electron pairs are the lone pairs of the atom.
3. Which of the following statements about resonance is TRUE?
I. Resonance hybrids occur because a compound changes back and forth between two or more resonancestructures
II. Resonance structures differ in the arrangement of electrons but not in the arrangement of atoms.
III. Resonance hybrids contain delocalized electrons.
IV. Resonance structures for a given compound always contribute equally to the resonance hybrid.
V. Resonance structures occur when there are two or more valid Lewis structures for a given compound.
VI. Resonance hybrids are a composite of resonance structures.
a.I, II, V, VI
b. II, III, IV, VI
c. II, III, V, VI
d. II, IV, V, VI
4. How many resonance forms will nitrate ion (NO3) have?
a. - 1 b. 1 c. 2 d. 3
5. What is the first noble gas?
a. Xenon b. Radon c. Helium d. Krypton
6. What is the principle used for filling of atomic orbitals?
a. Azimithual Principle
b. Hund's Principle
c. Pauling's Exclusion Principle
d. Aufbau Principle
7. How many electrons can "m" shell accommodate?
a. 16 b. 17 c. 18 d. 19
8. What number of shells used for the accommodation of electrons in an atom? a. one b. two c. three d. four
9. What distribution does the electron configuration describe?
a. protons
b. neutrons
c. electrons
d. ions
10. How many total electrons can the "p" orbitals hold?
a. 3 b. 1 c. 7 d. 6
11. Who are the founding fathers of Quantum Mechanics?
a. Werner Karl Heisenberg
b. Isaac Newton
c. Erwin Schrodinger
d. a and c
12. There are _types of quantum numbers.
a. 2 b. 4 c. 5 d. 7
13. Which of the following elements can only form one bond in a Lewis structure? a. H b. O c. Al d. N
14. Which rule states that electron will go into empty orbitals of the same energy before entering into an orbital with an electron present?
a. Hand's rule
b. Hund's rule
c. Pauli Exclusion Principle
d. Aufbau Principle
15. What is the definition of diamagnetic atom?
a. An atom where all of the electrons are paired
b. An atom where some of the electrons are paired.
c. An atom where none of the electrons are paired.
d. An atom attracted to a magnetic field.
Answer:
a
Explanation:
Its because ammonium has thee hydrogen atoms
Which idea behind the shape of molecules includes the concept that electrostatic repulsion between electron pairs surrounding an atom causes these pairs to be separated as far as possible
Answer:
VSEPR theory
Explanation:
The valence shell electron pair repulsion theory was propounded by Gillespie and Nylom (1957).
The entire idea of the VSEPR theory is that the shape of a molecule depends on the electrostatic repulsion between electron pairs surrounding the central atom in a molecule which causes these pairs to be separated as far as possible.
The shapes of many molecules can be accurately predicted based on this model.
1. When a solution of an acid contains larger amount of acid, it is said to be
Answer:
highly concentrated solution of acid
Electrons will fill all empty orbitals within a sublevel before they begin to pair up. This is:
A. Hund’s rule
B. The Aufbau principle
C. None of these
D. Conservation of energy
Answer: Hund’s rule
Explanation:
