Noise is a term for the electrical phenomenon that hinders correct signal transmission.
What three electrical phenomena are there?An electrical circuit's ability to store energy in the form of such an electromagnetic field is known as inductance. Eddy currents that travel through a conductor cause it to heat up (induction heating). Heat produced in such a conductor as charges flow through it, like in wires and resistors.
Static electricity: Is it a real thing?A common electric phenomena called static electricity occurs when charged particles are transmitted from one body to another. For instance, when two insulators are rubbed together in a dry environment, the resulting charges are equal and opposite to one another.
To know more about electricity visit:
https://brainly.com/question/2678677
#SPJ4
what is the formula to find the volume of a sphere
what is the primary driver of creating wind on the surface of the earth? select one: a. earth's magnetic field b. uneven heating of earth's surface by the sun c. ocean currents d. the moons gravitational pull on the earth
B. uneven heating of earth's surface by the sun. The primary driver of creating wind on the surface of the earth is the uneven heating of earth's surface by the sun.
What principal force propels air across the Earth's surface?Wind is the term for the flow of air through any planet's atmosphere. On Earth, winds are mostly brought on by the sun's uneven heating. Because of these variations in temperature, winds blow from places with high atmospheric pressure to areas with low atmospheric pressure.
What is the main force behind the ocean's surface current?Ocean currents, which are fueled by friction between the water and the wind that blows over its surface, are one of the many factors that accelerate the ocean's perpetual motion. Although the wind is the main reason for surface currents, other factors also affect how the ocean's waters travel.
The most notable of these is the Coriolis effect, which is caused by the Earth's rotation diverting currents off their intended course. The rotation of the Earth causes currents to be redirected to the right in the Northern Hemisphere and to the left in the Southern Hemisphere.
The gyres in the two hemispheres consequently flow in opposing directions.
To know more about winds visit
https://brainly.com/question/12005342
#SPJ4
A motorcycle initially travelling at 15.0 m/s comes to rest in 5.0 s. What is its deceleration and how
far does it travel during deceleration?
The deceleration of the motorcycle is -3.0 m/s^2 and it travels 75.0 m during deceleration.
To find the deceleration of the motorcycle, we can use the formula:
deceleration = (final velocity - initial velocity) / time
Plugging in the given values, we get:
deceleration = (0 m/s - 15.0 m/s) / 5.0 s = -3.0 m/s^2
To find the distance the motorcycle travels during deceleration, we can use the formula:
distance = (initial velocity * time) + (1/2 * deceleration * time^2)
Plugging in the given values, we get:
distance = (15.0 m/s * 5.0 s) + (1/2 * -3.0 m/s^2 * 5.0 s^2) = 75.0 m
So the deceleration of the motorcycle is -3.0 m/s^2 and it travels 75.0 m during deceleration.
Which type of eclipse makes the Sun appear in the form of a ring?
A.
total solar eclipse
B.
partial solar eclipse
C.
annular solar eclipse
D.
partial lunar eclipse
E.
total lunar eclipse
Answer: D. Annular Solar Eclipse
Explanation:
An annular solar eclipse happens when the Moon passes between the Sun and Earth, but when it is at or near its farthest point from Earth. Because the Moon is farther away from Earth, it appears smaller than the Sun and does not completely cover the Sun.
building a dam to produce hydro-electric power and create water storage is one way to take advantage of a common renewable resource. this produces much less pollution than a coal burning plant. water being let out of the dam also produces a lot of kinetic (movement) energy. however, building dams are not a perfect solution. what is the most likely problem related to dams?
Using the water that is both held in dams and flowing in rivers, hydropower, also known as hydroenergy, is a renewable energy source.
What kind of electricity does a dam generate when it transforms the force of the water into electrical energy?In order to generate electricity, hydroelectric power uses the force of moving water, making it a renewable energy source. Long before you switch on a light at home or at work, the hydroelectric process has already begun.
How do dams generate electricity, or more specifically, how do they transform the energy of moving water into AC power?Water must flow in order to generate power. Kinetic energy is energy that moves. The energy transforms into mechanical (machine) energy as flowing water turns blades in a turbine.
To know more about hydropower visit :-
https://brainly.com/question/22258411
#SPJ4
an object completly submerged in water as shown in the figure. draw arrows, which represent the force of the water at that depth, at various locations on the top, bottom, and side of the object. how does the force on one side of the object compare to the force on the other? how does the force on the top compare to taht on the bottom
The downward force here on top of the cylinder is greater than this pressure's equivalent upward force here on bottom of the cylinder.
What is an illustration of pressure?By pressing a knife on some fruit, one can get a straightforward illustration of pressure. The surface won't be cut if you press the flat section of the knife against the fruit. The force is dispersed over a wide area (low pressure).
How many pressure units are there?Other pressure measurements include pounds per square inch, bar, millimeters of mercury (used to measure blood pressure), centimeters of water, torr, MSW, and FSW. Atmospheric pressure is measured in atm.
To know more about pressure visit:
https://brainly.com/question/12971272
#SPJ4
example 10.11 discusses the conversion of spring potential energy to kinetic energy. how much energy is initially stored in the spring?
A spring-loaded to gun is used to launch a 10 plastic ball. The spring, which has a spring constant of 10 N/m, is compressed by 10 cm as the ball is pushed into the barrel. When the trigger is pulled, the spring is released and shoot the ball back out horizontally.
Answer:
Below
Explanation:
ESE = 1/2 k d^2
= 1/2 * 10 N/m * .1 m = .5 J
3. A box that weighs 375 N is lifted a distance of 35.0 m straight up by a cable attached to a
motor. The job is done in 5.0 seconds. What power is developed by the motor in watts?
Answer:
68
Explanation:
i tried my best but im not sure
As, work done = perpendicular distance * force
= 35*375
= 13175
therefore, power = work done/time
= 13175/5
= 2625W
what is the change in internal energy of a system that takes in 4.23 106 j of heat, and does 4.50 105 j of work while dissipating 9.07 106 j of heat?
The change in internal energy of a system is - 5290×10⁴J.
What do you mean by internal energy?Innate strength A system's or a body's (with clearly defined boundaries) U is made up of the sum of the kinetic and potential energies resulting from molecular motion as well as the electric and vibrational motion of the atoms within molecules.
Heat transfer into the system Q₁ = 4.23×10⁶J
Heat transfer out of the system Q₂ = 9.07× 10⁶J
Work done W = 4.50×10⁵J
The heat transfer into the system less the heat transfer out of the system is now known as the net heat transfer.
Q = Q₁ - Q₂
Q = 4.23×10⁶ - 9.07× 10⁶
Q = -4.84× 10⁶J
The first law of thermodynamics provides the following formula for the change in internal energy:
ΔU = Q - W
ΔU = -4.84× 10⁶ - 4.50×10⁵
ΔU = - 5290×10⁴J.
A negative sign indicates a decrease in internal energy.
To know more about internal energy visit:
https://brainly.com/question/17000082
#SPJ4
-. The magnitude of vector A is 18.5 Vector lies in the fourth
quadrant and forms an angle of 55° with the x-axis. What are
the components of vector A?
(+ , -)
- sin(55)=y/18.5 -> 18.5sin(55)=y
- cos(55)=x/18.5 -> 18.5cos(55)=x
How can you determine a vector's direction given its magnitude?The magnitude will be given by |v|=a2+b2 if v=a,b is indeed the coordinates.In accordance with the application the direction usually equal to the angle made with the x-axis or the y-axis.The formula tan=(ba)=tan1(ba) can be used to determine the direction of a position vector, as shown in Figure 8.8.
How do you calculate that magnitude of a four-part vector?Any number of dimensions can be included in the generalization of the vector magnitude formula.For instance, the formula for the magnitude of a four-dimensional vector a=(a1,a2,a3,a4) is a=a21+a22+a23+a24.
To know more about magnitude of vector visit:
https://brainly.com/question/14033610
#SPJ1
A car advertisement states that a certain car can accelerate from rest to 30 m/s in 5 seconds. Find the car’s average acceleration. (Prefered if using KWEPA method!)
The car’s average acceleration is 6 meter/second^2.
What is acceleration?Acceleration is rate of change of velocity with time. Due to having both direction and magnitude, it is a vector quantity. Si unit of acceleration is meter/second² (m/s²).
Given that: the car can accelerate from rest to 30 m/s in 5 seconds.
Hence, average acceleration of the car = change in speed/time interval
= ( final speed - initial speed)/time interval
= ( 30 m/s - 0 m/s) / 5 second
= (30/5) meter/second^2
= 6 meter/second^2.
Hence, the average acceleration of the car is 6 meter/second^2.
Learn more about acceleration here:
brainly.com/question/12550364
#SPJ1
collin was thrown from his horse while riding and subsequently received a blow to the back of his head. what might collin have trouble with?
After thrown from his horse, Collin might have trouble with his occipital lobe.
The occipital lobe is one of the four significant lobe of the cerebral cortex in the mind of warm blooded creatures. The name gets from its situation at the rear of the head, from the Latin ob, "behind", and caput, "head".
The occipital lobe is the visual handling focus of the mammalian mind containing a large portion of the physical locale of the visual cortex. The essential visual cortex is Brodmann region 17, ordinarily called V₁(visual one). Human V₁ is situated on the average side of the occipital curve inside the calcarine sulcus; the full degree of V₁ frequently go on onto the occipital shaft.
V₁ is much of the time likewise called striate cortex since it tends to be distinguished by a huge stripe of myelin, the Stria of Gennari. Outwardly determined locales outside V₁ are called extrastriate cortex. There are numerous extrastriate districts, and these are specific for various visual errands, for example, visuospatial handling, variety separation, and movement insight. Two-sided injuries of the occipital curve can prompt cortical visual deficiency.
To know more about occipital lobe, visit here:
https://brainly.com/question/14567052
#SPJ4
Which choice below pairs a scientific term with the correct scientific unit?
power: Watt
force: Joule
power: Joule
work: Newton
Answer:
Power : Watt
Explanation:
Answer:
Explanation:
work: joule
power: watt
force: newton
power: joule
1) When there is friction between surfaces, energy is transferred out of a system as ________
energy.
Answer:
heat energy
Explanation:
heat energy
in order to treat the horizontal and vertical dimensions of a projectile as separate, which assumption must be true? initial y velocity is zero air resistance is negligible the projectile travels over level ground initial velocity is at a 45 degree angle initial x velocity is zero
In order to treat horizontal and vertical dimensions of a projectile as separate, the assumption that is True is (d)initial x velocity is zero .
What is a Projectile ?
Projectile motion is defined as the motion of an object that is thrown (projected) into air. and After initial force that launches object, it only experiences force of gravity.
The object is called as a projectile, and the path is called as trajectory.
the condition to treat horizontal and vertical dimensions of a projectile as separate is that "we need to take the acceleration in x direction as 0 "
that means ; initial x velocity is zero .
Therefore , the correct option is (d).
The given question is incomplete , the complete question is
In order to treat the horizontal and vertical dimensions of a projectile as separate, which assumption must be true?
(a) initial y velocity is zero
(b) air resistance is negligible
(c) the projectile travels over level ground initial velocity is at a 45 degree angle
(d) initial x velocity is zero .
Learn more about Projectile here
https://brainly.com/question/29045179
#SPJ4
the sun has a mass of 2.0 x 1030 kg and radiates energy at the rate of 3.9 x 1026 w. (a) at what rate does the sun transfer its mass to other forms of energy? (b) what fraction of its original mass has the sun lost in this way since it began to burn hydrogen, about 4.5 x 109 y ago?
The rate at which sun transfers its mass to other forms of energy is 4.3* 10⁹ kg/s.
The fraction of its original mass has the sun lost in this way since it began to burn hydrogen, about 4.5 x 109 y ago is 3.1 * 10⁻⁴.
Given that,
Mass of the sun = 2* 10³⁰ kg
Radiation power P = 3.9* 10²⁶ W
The rate of changing mass is P = E/t = (m*c²)/t
Re-arranging the terms, we have,
m/t = P/c² = (3.9* 10²⁶)/(3* 10⁸)² = 4.3* 10⁹ kg/s
Fraction of original mass lost is Δm = m/t * t = (4.3* 10⁹)* (4.5* 10⁹)
⇒ 6.15 * 10²⁶ kg
Fraction of mass lost = Δm/(m + Δm) = (6.15 * 10²⁶)/(2* 10³⁰ + 6.15 * 10²⁶)
⇒ 3.1 * 10⁻⁴
To know more about energy:
https://brainly.com/question/15968490
#SPJ4
A piece of stone is projected vertically upwards with a speed of 25ms^-1. Determine it's speed at it's point reached
Assuming a piece of stone is projected vertically upwards with a speed of 25ms^-1, its speed at its highest point reached is equal to zero (0) m/s.
What is projectile motion?In Science, projectile motion can be defined as a form of motion which is experienced by a physical object (body) that is projected near the surface of planet Earth, while moving along a parabolic path, and under the influence of a gravitational force (gravity) only.
Generally speaking, when this stone is thrown straight up or projected vertically upwards at a certain speed, it begins to slow down as a result of the effect of downward gravitational acceleration.
Consequently, the stone reaches a maximum height (highest point) where it cannot go higher anymore and then starts to fall down (descend) due to gravity.
In this context, we can reasonably infer and logically deduce that the speed of any physical object would be equal to zero (0) meter per seconds when it reaches a maximum height (highest point).
Read more on projectile motion here: brainly.com/question/10055273
#SPJ1
Complete Question:
A piece of stone is projected vertically upwards with a speed of 25 ms^-1. Determine its speed at its highest point reached. (g = 10 ms-2).
On an ECG machine that meets the international standard, the paper moves at ________.
a. 25 mm/second
b. 10 mm/second
c. 25 mm/minute
d. 10 cm/minute
On an ECG machine that meets the international standard, the paper moves at 25 mm/second.
an electron moves horizontally toward a screen. the electron moves along the path that is shown because of a magnetic force caused by a magnetic field. in what direction does that magnetic field point?
The direction of the magnetic field point is out of the page.
A magnetic field is a vector field that represents the effect of magnetism on moving charges, currents, and magnetic bodies. A charge moving in a magnetic field experiences a force perpendicular to its velocity and magnetic field.
A magnetic field is a vector field that describes the effect of magnetism on moving charges, currents, and magnetic bodies. A charge moving in a magnetic field experiences a force perpendicular to its velocity and magnetic field. Around a permanent magnet or wire carrying a constant current in one direction, the magnetic field is static and is called a static magnetic field.
Learn more about The magnetic field here:- https://brainly.com/question/14411049
#SPJ4
We have been advised that there's an electron that is moving within the course of the magnetic subject and that the course of the magnetic field is on this web page. The display is considered the page and the magnetic discipline direction is in it. The route in which this electron will enjoy magnetic pressure is what we need to determine.
The path of the current is more special than the direction of the terrible price because the electron is negatively charged. as the electron actions to the left, we take the path of the modern-day because of the right one. We use Fleming's left-hand room right here.
Electron moves :-Fleming's left-hand rule is used to discover the course of the magnetic pressure. The line with this rule, we placed the arms in a line. The important finger need to point to the proper side of the modern. The pointer finger must factor inside the route of the magnetic discipline that is into the display and the thump here ought to constitute the path of the force. The Tampere factors upward. The path of the magnetic force could be within the upward route. the solution is that.
Learn more about Electron moves:- https://brainly.com/question/29981835
#SPJ4
Maddy tripped and accidentally threw her phone off the hollywood cliff at 5m/s. It landed 20 away from the base of the cliff. how high is the cliff then?
The height of the cliff, given that her phone landed 20 m away when she accidentally threw her phone with a velocity of 5 m/s is 78.4 m
How do I determine the height of the cliff?To determine the height of the cliff, we must first obtain the time taken for her phone to reach the ground. This is obtained as follow:
Horizontal velocity (u) = 5 m/sHorizontal distance (s) = 20 mTime taken (t) =?s = ut
20 = 5 × t
Divide both sides by 5
t = 20 / 5
t = 4 s
Finally, we shall determine the height of the cliff. Details below:
Time taken (t) = 4 sAcceleration due to gravity (g) = 9.8 m/s²Height (h) = ?h = ½gt²
h = ½ × 9.8 × 4²
h = 4.9 × 16
h = 78.4 m
Thus, the height of the cliff is 78.4 m
Learn more about height:
https://brainly.com/question/22740770
#SPJ1
a small ferryboat is 4.70 m wide and 6.50 m long. when a loaded truck pulls onto it, the boat sinks an additional 3.70 cm into the river. what is the weight of the truck?
According to the given statement 11303.5 kg is the weight of the truck.
What does physics' Archimedes principle entail?The buoyant force, which applies to a person at rest in a fluid, is proportional to the weight of the displaced water and pushes higher. The amount of fluid displaced when the body is fully immersed is equal to the body's volume.
Briefing:The Archimedean principle, which asserts that the hydrostatic push is equal to the weight of the desalinated liquid, is used to solve this task.
B = ρ g V
It is in balance with the push when the truck is at full weight, according to Newton's law of equilibrium.
Σ F = 0
B-W = 0
B = W
body weight
W = M g
the volume is
V = l to h
(l to h) = M g
M = l a h
we calculate
M = F = 1000 . 10. (4.70 x 6.50 x 0.037) = 11303.5 N
M = 11303.5 kg
To know more about Archimedean visit:
https://brainly.com/question/1603482
#SPJ4
9. a soap bubble is 100 nm thick and illuminated by white light incident perpendicular to its surface. what wavelength and color of visible light is most constructively reflected, assuming the same index of refraction as water?
When a soap bubble 100 nm thick and illuminated by white light incident perpendicular to its surface, then wavelength, λ is calculated = 5.32 *10^-7 m.
What is index of refraction?The ratio of the speed of light in a vacuum, c, to the speed of light in a medium, c' is called as index of refraction. One of the consequence of this difference in speed is that when light goes from one medium to another at an angle, then the propagation vector in the new medium has a different angle with respect to normal.
Given, t= 100nm= 100 * 10 ^-9 n= 1.33
ΔФ1 = λ/4
ΔФ2 = 2√2 t λ n/2 λ
=2 t n
=2 * 100 * 10 ^-9 * 1.33
= 2.66 *10^-7
2.66 *10^-7= λ/2
λ= 5.32 *10^-7 m.
To know more about index of refraction, refer
https://brainly.com/question/12469161
#SPJ4
Earth has a very strong gravitational force that can pull the objects to fall to the Earth's surface. How do satellites overcome this problem and stay in its orbit?
9) During a game of bowling, which of the following describe the ball's motion?(SELECT ALL ANSWERS THAT APPLY)
A) The ball is accelerated while it is pushed by the student's hand due to an
unbalanced force.
B) The ball slows down as it rolls because friction exerts an unbalanced force.
C) The ball is accelerated while it is held in the student's hand due to balanced
Forces.
D) The ball does not change its motion as it rolls because of the balanced force
provided by friction.
E) The ball does not change its motion while it is held in the student's hand due to
balanced forces.
Answer:
The answer seems to be,
A) The ball is accelerated while it is pushed by the student's hand due to an
A) The ball is accelerated while it is pushed by the student's hand due to anunbalanced force.
(The answer might be wrong. )
TRUE/FALSE
1) A test booklet is sitting at rest on a desk. Compared to the force of the booklet on the
desk, the force of the desk on the booklet is the same. _______________
True
False
2) The acceleration of an object is always in the direction of the net force acting on it.
True
False
Answer:
TRUE - A test booklet is sitting at rest on a desk. Compared to the force of the booklet on the desk, the force of the desk on the booklet is the same.
TRUE - The acceleration of an object is always in the direction of the net force acting on it.
a. leds cannot be made of silicon because silicon has a smaller band gap compared to gaas. b. gaas has a larger band-gap compared to silicon therefore it can absorb a larger portion of the sunlight energy. c. by adding impurities that facilitate and accelerate carrier recombination, solar cell efficiencies can be improved. . removed! m. work function of aluminum is smaller than the distance between conduction band of silicon and vacuum level, therefore, aluminum contacts with n-type silicon result in schottkey junctions.
a. LEDs cannot be made of silicon because silicon has a smaller band gap compared to GaAs. This statement is False.
b. GaAs has a larger band-gap compared to silicon therefore it can absorb a larger portion of the sunlight energy. This statement is also Not True.
c. by adding impurities that facilitate and accelerate carrier recombination, solar cell efficiencies can be improved. This is True.
a) LED's are p-n junction devices constructed of gallium arsenide, silicon not suitable because those junction produce heat and no appreciable IR or visible limit. So it is 'FALSE'.
b) GaAs has band gap of 1.52 ev and si has 1.0 ev but si has more absorption so it is 'FALSE'.
c) By adding impurity, concentration of charge carrier increases, so more efficiency; so it is 'TRUE'.
d) Yes it is TRUE : Aluminum work function is less so aluminum contacts with n-type silicon result in Schottky junction.
To learn more about Energy Gap, Here :
https://brainly.com/question/16960217?referrer=searchResults
#SPJ4
(a) what is the magnitude of the tangential acceleration of a bug on the rim of an 11.0-in.-diameter disk if the disk accelerates uniformly from rest to an angular speed of 79.0 rev/min in 3.50 s?
The magnitude of the tangential acceleration is 0.329m/s².
The degree of tangential acceleration can be calculated in what way?At=r a t = r is the formula for tangential acceleration, where r is the circle's radius and is the angular acceleration. The definition is derived from the fact that the arc length is equal to the circle's radius times the angle in radians.
d = Diameter of rim = 11.0 in = 11 × 0.0254 = 0.2794m
r = Radius = d/2 = 0.2794/2 = 0.1397m
[tex]\omega_{f}[/tex] = Final angular velocity = 79 × 2π/60 = 8.26rad/s
[tex]\omega_{i}[/tex] = Initial angular velocity = 0
∝ = Angular acceleration
t = Time taken = 3.5s
Rotational motion equation,
[tex]\omega_{f}[/tex] = [tex]\omega_{i}[/tex] + ∝t
∝ = [tex]\omega_{f}[/tex] - [tex]\omega_{i}[/tex]/t
∝ = 8.26 - 0/3.5
∝ = 2.36 rad/s²
Magnitude of the tangential acceleration given by
[tex]a_{t}[/tex] = r∝
[tex]a_{t}[/tex] = 2.36 × 0.1397
[tex]a_{t}[/tex] = 0.329m/s².
To know more about tangential acceleration visit:
https://brainly.com/question/14368661
#SPJ4
one cannot peer all the way back and directly observe the big bang because the universe's density was so low. true false
True. The Big Bang Theory is the current scientific explanation for the origin and evolution of the universe. According to this theory, the universe was initially in a state of extremely high density and temperature, and it has been expanding and cooling since its inception.
One reason we cannot directly observe the Big Bang is that the universe's density was so low at that time that there were no solid particles, such as atoms or molecules, that could have formed into stars or galaxies. Instead, the universe was filled with a hot, ionized plasma that was too diffuse to be observed by telescopes. Another reason is that the expansion of the universe has caused the light and other electromagnetic radiation that was emitted during the Big Bang to become redshifted, or stretched out in wavelength, over time. This means that the light from the earliest moments of the universe has shifted into the microwave and radio frequency ranges, which are not visible to the human eye. Therefore, while we can infer some details about the conditions of the early universe based on observations of the cosmic microwave background radiation and the large-scale structure of the universe, we cannot directly observe the Big Bang itself.
To know more about redshift
https://brainly.com/question/13494718
#SPJ4
Which has more momentum: a 30 of mass that is stationary or a 0.30 kg mass moving at 1.0 m/s?
Answer:
.30 kg mass moving at 1.0 m/s
Explanation:
Well if the 30 mass isn't moving, then that isn't momentum. But if the .30 kg of mass if moving, then that would be momentum. So the correct answer is .30 kg of mass
Answer:
a 0.30 kg mass moving at 1.0 m/s
Explanation:
p = mv
Momentum is the product of mass and velocity. Since a stationary object has velocity=0, it has momentum=0*mass=0
An object with positive mass and nonzero velocity will always have positive momentum, so we could stop here.
An object with m=0.3kg and v=1m/s has
p = mv = 0.3kg * 1m/s = 0.3kg*m/s
which is more than 0.
Two aircraft p and q are flying at the ame peed,300 m the direction along which p i flying i at right angle to the direction along which p i flying ,find the direction of velocity
The magnitude of the velocity of the aircraft P relative to aircraft Q is zero
The velocity of the two aircraft given is
P & Q, v = 300 m/s
The angle of the direction between P&Q is
Ф = 90°
The magnitude of the velocity of aircraft P relative to aircraft Q is given by the formula which is as follows:
V = v cos Ф
Substituting the values in the above equation
v = 300 x cos 90°
= 300 x 0
= 0
Since the aircraft are at right angles, the velocity of one aircraft relative to the other would be equal to zero.
The above-mentioned can be better understood by referring to the following:
https://brainly.in/question/39308947
