The correct answer is bleaching of hair with hydrogen peroxide, curdling of milk by rennin and straightening frizzy hair by conditioner.
What is protein denaturation?Protein denaturation is the process by which a protein loses its shape and function due to exposure to certain environmental conditions such as heat, pH, pressure, or chemical agents. The denaturation process can cause the protein's structure to unravel, leading to the loss of its biological activity. This happens because the protein's three-dimensional structure is crucial to its function, and when the structure is altered, the protein may no longer be able to perform its intended function.
Protein denaturation can occur reversibly or irreversibly depending on the extent of the damage to the protein's structure. Reversible denaturation occurs when the protein regains its structure and function once the environmental stressor is removed, while irreversible denaturation occurs when the damage is permanent and the protein cannot regain its function.
To know more about protein denaturation, visit:
https://brainly.com/question/19756195
#SPJ1
The full question is:
The denaturing of proteins occurs when the stabilizing forces are altered. Below is the set of processes in which proteins are denatured. Write the chemicals necessary for the denaturation to occur
1. Bleaching of hair
2. Curdling of milk
3. Straightening frizzy hair
What is the amount of pi?
However, it is commonly approximated as 3.14159.
What is an irrational number ?An irrational number is a number that cannot be expressed as a simple fraction or ratio of two integers. It is a non-repeating, non-terminating decimal. Examples of irrational numbers include pi (π), the square root of 2 (√2), and the golden ratio (∅).
What is a termination ?In mathematics, a terminating decimal is a decimal number that has a finite number of digits after the decimal point, i.e., the decimal representation ends in a finite number of zeroes. For example, 0.75, 2.0, and 0.0625 are terminating decimals.
To know more about irrational visit :
https://brainly.com/question/15837135
#SPJ1
What is the pH of 0.335 M trimethylammonium chloride, (CH3)3NHCI? The Kb of trimethylamine, (CH3)3N, is 6.3 x 10-5. (value = 0.02)
The pH of 0.335 M trimethylammonium chloride, (CH3)3NHCI is approximately 5.676.
What is pH?
To find the pH of the solution, we need to first determine if (CH3)3NHCI acts as an acid or base. Since (CH3)3NHCI is a salt composed of a weak base, trimethylamine, and a strong acid, hydrochloric acid (HCI), it will undergo hydrolysis in water.
The hydrolysis reaction is given by:
(CH3)3NH+ (aq) + H2O (l) ⇌ (CH3)3N (aq) + H3O+ (aq)
The Kb expression for the equilibrium reaction is:
Kb = [ (CH3)3N ] [ H3O+ ] / [ (CH3)3NH+ ]
Since (CH3)3NH+ and HCl dissociate completely in water, the initial concentration of (CH3)3NH+ is equal to the concentration of (CH3)3NHCI, which is 0.335 M.
Using the Kb value given, we can solve for the concentration of H3O+:
Kb = 6.3 x [tex]10^{-5}[/tex] = [ (CH3)3N ] [ H3O+ ] / 0.335
[ H3O+ ] = Kb x (CH3)3NH+ / (CH3)3N
[ H3O+ ] = 6.3 x [tex]10^{-5}[/tex] x 0.335 / 1
[ H3O+ ] = 2.1095 x [tex]10^{-6}[/tex] M
Finally, we can calculate the pH using the expression:
pH = -log [H3O+]
pH = -log (2.1095 x [tex]10^{-6}[/tex])
pH = 5.676
Therefore, the pH of the solution is approximately 5.676.
To know more about pH, visit:
https://brainly.com/question/15289741
#SPJ1
Complete question is: The pH of 0.335 M trimethylammonium chloride, (CH3)3NHCI is approximately 5.676.
Please help me. Thank you
The standard change in Gibbs energy at 25 degree Celsius is 490.6 °C. for given equilibrium partial pressure .
What is Gibbs energy ?The Gibbs energy is the thermodynamic potential that is minimized when a system reaches chemical equilibrium at constant pressure and temperature when not driven by an applied electrolytic voltage. Its derivative with respect to the reaction coordinate of the system then vanishes at the equilibrium point.
Using the formula
ΔG° = - R × T ln K
WHERE R= 8.3144598 J⋅mol⁻¹⋅K⁻¹.
T = 298 K
K = 0.82
SOLVING ,
The standard change in Gibbs energy at 25 degree Celsius is 490.6 °C.
To know more about Gibbs energy , visit ;
brainly.com/question/20358734
#SPJ1
How many atoms of lithium are in 18.7 g?
The atoms of lithium that are in 18.7 g is 16 × 10²³ atoms . This is taken out by mole concept .
What is mole concept ?The mole is a unit of measurement similar to the pair, dozen, gross, and so on. It provides a precise count of the atoms or molecules in a bulk sample of matter. A mole is the amount of substance that contains the same number of discrete entities (atoms, molecules, ions, etc.)
if 7 grams of lithium contain 6 × 10²³ atoms
then 18.7 will contain 16 × 10²³ atoms
to know more about mole concept , visit ;
brainly.com/question/31123980
#SPJ1
Ethanol (C2H5OH) boils at a temperature of 78.3 degrees C. What amount of energy, in joules, is necessary to heat to boiling and then completely vaporize a 13.1 g sample of ethanol initially at a temperature of 11.1 degrees C? The specific heat of ethanol is approximately constant at 2.44 JK−1g−1. The heat of vaporization of ethanol is 38.56 kJ mol−1.
The total amount of energy necessary to heat and vaporize a 13.1 g sample of ethanol initially at a temperature of 11.1 degrees C is 7.15 kJ.
To calculate the amount of energy, in joules, necessary to heat and vaporize a 13.1 g sample of ethanol initially at a temperature of 11.1 degrees C, we must first calculate the heat necessary to heat the sample to the boiling point of ethanol, 78.3 degrees C. The formula to calculate the amount of energy is: Q = mcΔT, where m is the mass of the sample, c is the specific heat of ethanol, and ΔT is the temperature change from 11.1 degrees C to 78.3 degrees C. Thus, the amount of energy necessary to heat the sample is: Q = 13.1 g * 2.44 JK−1g−1 * (78.3-11.1) = 1,623.08 J.
Next, we must calculate the amount of energy necessary to completely vaporize the sample. To do so, we must use the heat of vaporization of ethanol, which is 38.56 kJ mol−1. To convert from moles to grams, we must use the molar mass of ethanol, which is 46 g/mol. Thus, the amount of energy necessary to vaporize the sample is: Q = (13.1 g/46 g/mol) * 38.56 kJ/mol = 7.15 kJ.
Finally, to calculate the total amount of energy necessary to heat and vaporize the sample, we must add the two values together: Q = 1,623.08 J + 7.15 kJ = 7.15 kJ. the total amount of energy necessary to heat and vaporize a 13.1 g sample of ethanol initially at a temperature of 11.1 degrees C is 7.15 kJ.
For more such questions on ethanol
https://brainly.com/question/29523373
#SPJ11
Which of the following is the major organic product of the condensation of ammonia or a primary amine with the carbonyl group of an aldehyde or ketone?
Imine
The major organic product of the condensation of ammonia or a primary amine with the carbonyl group of an aldehyde or ketone is an imine.
A functional group or organic substance with a carbon-nitrogen double bond (C=N) is known as an imine. A hydrogen atom or an organic group may be joined to the nitrogen atom. (R). The carbon atom is connected to two more single bonds. Imines are present in numerous processes and are frequently found in manufactured and naturally occurring chemicals.
The five core atoms for ketimines and aldimines, C2C=NX and C(H)C=NX, respectively, are coplanar. The sp2-hybridization of the mutually double-bonded nitrogen and carbon atoms yields planarity. For nonconjugated imines, the C=N distance is 1.29-1.31, whereas for conjugated imines, it is 1.35. The C-N distances in amines and nitriles, on the other hand, are 1.47 and 1.16, respectively. Slow rotation occurs around the C=N bond. E- and Z-isomers were detected using NMR spectroscopy of aldimines have been detected. Owing to steric effects, the E isomer is favored.
An imine is formed when a primary amine reacts with a carbonyl group (C=O) of an aldehyde or ketone to form a new C-N bond. This reaction is known as a condensation reaction, as it involves the loss of a small molecule (e.g. water) to form the product.
For more such questions on condensation reaction , Visit:
https://brainly.com/question/1361341
#SPJ11
The correct questions is :
What is the major organic product of the condensation of ammonia or a primary amine with the carbonyl group of an aldehyde or ketone?
FILL IN THE BLANK. Use the Gizmo to find the freezing, melting, and boiling points of water at 5,000 meters (16,404 feet). Write these values below. Freezing point: _______ Melting point: _______ Boiling point: _______
If we use the Gizmo to find the freezing, melting, and boiling points of water at 5,000 meters (16,404 feet) then,
Freezing point: 32 ºF (0ºC)
Melting point: 32 ºF (0ºC)
Boiling point: 203°F (95°C)
The freezing point is defined as the temperature at which a liquid becomes a solid. Increased pressure usually raises the freezing point with the melting point of the solid. The boiling point of a pure substance is defined as the temperature at which the substance transitions from a liquid to the gaseous phase. At the boiling point the vapor pressure of the liquid is equal to the applied pressure on the liquid. The melting point of a substance is defined as the temperature at which the substance changes from a solid to a liquid.
Melting occurs at a single temperature for the pure substances. The normal and average melting point and boiling point of water at 1 atmospheric pressure are 0°C and 100°C respectively. Decreasing the pressure under 1 atm. will lower the boiling point since the external pressure will be lower so it will become equal with the vapor pressure at a lower temperature.
To learn more about Freezing point
https://brainly.com/question/40140
#SPJ4
The activation energy Ea for a particular reaction is 50.0 kJ/mol. How much faster is the reaction at 314 K than at 310.0 K? (R = 8.314 J/mol • K)
In comparison to 310.0 K, the reaction happens 1.28 times faster at 314 K.
A higher K value: what does it mean?A high K value (higher than 1) denotes an equilibrium with more products than reactants, whereas a low K value (less than 1) denotes an equilibrium with more reactants than products.
The Arrhenius equation, which connects the rate constant (k) to the activation energy (Ea) and temperature (T), can be used to determine how much faster the reaction happens at 314 K than it does at 310.0 K. k = A * exp(-Ea / (R * T))
where T is the temperature in Kelvin, R is the gas constant, and A is the preexponential factor.
For this reaction, we can assume that the pre-exponential component is fixed and that the sole variable is temperature.
exp[(Ea / R) * (1/T1 - 1/T2)] = k2 / k1
where Ea is the activation energy, R is the gas constant, k1 is the rate constant at 310.0 K, and k2 is the rate constant at 314 K.
k2 / k1 = exp[(50.0 kJ/mol / (8.314 J/mol•K)) * (1/310.0 K - 1/314 K)] is the result of substituting the provided numbers.
If we condense this phrase, we get:
k2 / k1 = 1.28
To know more about reaction visit:-
https://brainly.com/question/28270550
#SPJ1
1. Choose the atom with the smaller atomic size.
Select one:
a. Nitrogen
b. Bismuth
2. Choose the atom with the smaller atomic size.
Select one:
a. Arsenic
b. Bromine
Its atomic radius increases form top to bottom inside a group, then decreases from left and right across a period. As a result, francium is indeed the largest element while helium is the smallest.
Which atomic size has the smaller diameter?Atomic radii inside the periodic table decrease across a row form left to right and increase across a column from top to bottom. Due to these two patterns, the periodic table's lower left and upper right corners, respectively, contain the largest and smallest atoms.
Which atom is the smallest?The atomic radius grows form top to bottom inside a group and decreases form left to right during a period, as seen in the images below. As a result, francium is indeed the largest element while helium is the smallest.
To know more about francium visit:
https://brainly.com/question/28617076
#SPJ1
a. The atom with the smaller atomic size is: Nitrogen
a. The atom with the smaller atomic size is: Arsenic.
How is atomic size of elements calculated?Atomic size, also known as atomic radius, is the distance between the nucleus of an atom and its outermost electrons. It is typically measured in picometers (pm) or angstroms (Å). The atomic size of an element can be calculated by finding the distance between the nucleus and the outermost electron shell of an atom of that element. This distance can be determined using various methods, including X-ray diffraction and spectroscopy. The atomic size of elements generally decreases from left to right across a period and increases from top to bottom down a group in the periodic table.
To know more about spectroscopy, visit:
https://brainly.com/question/28523860
#SPJ1
Write the electronic configuration and draw the orbital diagram for the element: lead (Z=82) State if it is diamagnetic/paramagnetic. Please decide the diamagnetic/paramagnetic property based on the orbital diagram only! (It is okay to use the noble gas in square brackets here)
Answer:
See below.
Explanation:
The atomic number of lead (Pb) is 82, which means it has 82 electrons. The electronic configuration of lead is
1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 5s² 5p⁶ 4f¹⁴ 5d¹⁰ 6s² 6p²
The orbital diagram for the valence electrons of lead (Pb) is
↑↓ ↑↓ ↑↓ ↑↓ ↑↓ ↑↓ ↑↓ ↑↓
s s p p p p d d
2 1 6 2 6 2 10 10
|||||||||
1 2 3 4 5 6 7 8
The notation ↑↓ represents a pair of electrons with opposite spins.
To determine if lead (Pb) is diamagnetic or paramagnetic, we need to look at whether there are any unpaired electrons. Based on the orbital diagram, we can see that all the electrons in the valence shell are paired, meaning that lead (Pb) is diamagnetic.
Which transition metal can form both a high and low spin complex? Zn2+, Cu2+, Mn3+, Ti2+
Answer: Manganese
Explanation:
With titanium, it only has two d electrons, so it can't form different high and low spin complexes. It doesn't matter because it will never fill the higher-energy orbitals. The total spin state turns out to be +1 (two unpaired d electrons, no matter what). Therefore, manganese will form both a high and low spin complex.
Look at the picture below
The claim was correct . All elements have same number of particles in one mole and have different number of particles in a mole based on atomic number .
What is mole ?In the International System of Units, the mole (symbol mol) is the unit of substance amount (SI). The amount of substance is a measurement of how many elementary entities of a given substance are present in an object or sample. An elementary entity can be an atom, a molecule, an ion, an ion pair, or a subatomic particle such as an electron, depending on the substance. For example, despite having different volumes and masses, 10 moles of water (a chemical compound) and 10 moles of mercury (a chemical element) contain equal amounts of substance, and the mercury contains exactly one atom for each molecule of water.
to know more about mole , visit ;
brainly.com/question/26416088
#SPJ1
2. Hydrogen bromide reacts with propene to form either 1-bromopropane or 2-bromopropane. Explain why
2-bromopropane is the major product.
3. Explain how the reaction with bromine can be used to test for an alkene. Include the mechanism for the reaction between hex-1-ene and bromine in your answer.
a) Describe the process of addition polymerisation.
b) Show the repeating unit of the polymer that is formed from the addition polymerisation of chloroethene monomers. Name and give at least one use for this polymer.
Answer:
Explanation:
2-bromopropane is the major product because the reaction mechanism involves the formation of the most stable carbocation intermediate. When hydrogen bromide reacts with propene, the hydrogen atom from HBr adds to the carbon atom of the double bond that has fewer hydrogen atoms attached, resulting in the formation of a carbocation intermediate. The intermediate can either form 1-bromopropane or 2-bromopropane depending on the position of the carbocation. The 2-bromopropane is the major product because the secondary carbocation formed in this case is more stable than the primary carbocation formed in the case of 1-bromopropane.
To test for an alkene, bromine water can be used. When an alkene reacts with bromine water, the bromine molecule adds across the double bond, forming a colorless dibromoalkane product. The mechanism for the reaction between hex-1-ene and bromine involves the formation of a cyclic bromonium ion intermediate, followed by the attack of water on the intermediate, resulting in the formation of the dibromoalkane product.
a) Addition polymerization is a process in which unsaturated monomers are joined together to form a polymer. The process involves breaking the double bond of the monomer and joining the monomers together to form a long-chain polymer. The process requires a catalyst to initiate the reaction.
b) The repeating unit of the polymer formed from the addition polymerization of chloroethene monomers is -CH2-CHCl-. This polymer is called polyvinyl chloride (PVC), and it has a wide range of uses, including pipes, electrical cables, and vinyl flooring.
which of the following statements may be true regarding a biochemical oxidation-reduction (redox) reaction?
A few statements may be true regarding a biochemical oxidation-reduction (redox) reaction. The statements are as follows: A redox reaction occurs when there is a transfer of electrons between molecules or atoms.
The electron donor becomes oxidized, and the electron acceptor is reduced, causing a transfer of energy. A redox reaction produces ATP, which is the primary energy currency of the cell. Oxidation and reduction are complementary reactions that occur simultaneously in the same reaction, resulting in the release of energy. Redox reactions are vital in metabolic pathways, and the electron carriers NAD+ and FAD+ are essential in these reactions. Oxygen is frequently used as a final electron acceptor in redox reactions. Redox reactions can also occur in non-cellular environments, such as photosynthesis, respiration, and combustion. The significance of redox reactions is enormous, and they play an essential role in sustaining life on earth. They help in generating energy, breaking down complex molecules, synthesizing molecules, and many other cellular processes.
To learn more about Oxidation-reduction :
https://brainly.com/question/13892498
#SPJ11
Each of the properties that follow is a characteristics of the carbon atom. in each case, indicate how the property contributes to the role of the carbon atom as the most important atom in biological molecules.
a. the carbon atom has a valence of four.
b. the carbon-carbon bond has a bond energy that is above the energy of photons of light in the visible range(400-700)
c. carbon is one of the lightest elements to form a covalent bond.
d. carbon can form single, double and triple bonds.
e. the carbon atom is a tetrahedral structure.
Carbon's unique properties such as having a valence of four, the ability to form various types of bonds including double and triple bonds, and its tetrahedral structure.
What are the properties of carbon bonds?
a. The carbon atom's valence of four enables it to form up to four covalent bonds with other atoms, allowing for the formation of diverse organic molecules. This property makes carbon the backbone of many biological molecules, including carbohydrates, lipids, proteins, and nucleic acids.
b. The high bond energy of carbon-carbon bonds makes them stable and resistant to breaking under normal physiological conditions, contributing to the stability of biological molecules. This property allows for the formation of complex macromolecules, such as enzymes and DNA, which are essential to life.
c. Carbon's relatively low atomic weight allows it to form strong covalent bonds without adding significant mass to the molecule. This property is essential for the formation of large and complex biological molecules, which require many carbon atoms to function properly.
d. The ability of carbon to form single, double, and triple bonds allows for the formation of diverse molecular structures, including cyclic structures and branching chains. This property contributes to the diversity of organic molecules found in living organisms, allowing for the creation of molecules with specific functions.
e. The tetrahedral structure of the carbon atom enables it to form strong and stable bonds with other atoms while maintaining a relatively stable geometry. This property is essential for the formation of complex three-dimensional structures in proteins and other biological molecules, allowing them to perform specific functions within cells.
Learn more about carbon bond here: https://brainly.com/question/12156863
#SPJ1
Chemistry Help Please! It's worth a lot of points
1.Write the equilibrium expression for the following reactions
a. H2SO4(aq) + H2O(L) ⇆ HSO4-(aq) + H3O+(aq)
b. 4NH3(g) + 5O2(g) ⇆ 4NO(g) + 6H2O(g)
c. NH4Cl(s) ⇆ NH3(g) + HCl(g)
d. N2O4(g) ⇆ 2NO2(g)
2. The following reaction has a K value of 0.050. What does that mean about the concentrations of the reactants as compared to the products? Be specific in your answer.
N2(g) + 3H2(g) ⇆ 2NH3(g)
3. The following reaction has a K value of 6.8 x 103. What does that mean about the concentrations of the reactants as compared to the products? Be specific in your answer.
2SO3(g) ⇆ 2SO2(g) + O2(g)
4. When dissolving substances in water, the degree of solubility of a substance is often represented as the solubility product constant (Ksp). The solubility product constant is the same thing as the equilibrium constant for the dissolving reaction. Two substances that dissociate in water are shown below alone with the Ksp.
NaCl(s) ⇆ Na+(aq) + Cl-(aq) Ksp = 36
BaSO4(s) ⇆ Ba2+(aq) + SO42-(aq) Ksp = 1.1 x 10-16
5. Identify and label the Brønsted-Lowry acid, its conjugate base, the Brønsted-Lowry base, and its conjugate acid in each of the following equations:
a. HNO3 + H2O ⟶ H3O+ + NO3−
b. CN− + H2O ⟶ HCN + OH−
c. H2SO4 + Cl− ⟶ HCl + HSO4−
d. HSO4− + OH− ⟶ SO42− + H2O
e. O2− + H2O ⟶2OH−
6. What is the conjugate acid of each of the following? What is the conjugate base of each of the following?
a. OH-
b. H2O
c. HCO3-
d. NH3
e. HSO4-
7. The following acids are shown with their equilibrium constants (also known as the acid dissociation constant). Rank these acids from strongest to weakest. Explain your ranking.
HCN(aq) + H2O(L) ⇆ H3O+(aq) + CN-(aq) K = 6.2 x 10-10
HC2H3O2(aq) + H2O(L) ⇆ H3O+(aq) + C2H3O-(aq) K = 1.75 x 10-5
H2CO3(aq) + H2O(L) ⇆ H3O+(aq) + HCO3-(aq) K = 4.5 x 10-7
HIO4(aq) + H2O(L) ⇆ H3O+(aq) + IO4-(aq) K = 2.3 x 10-2
8. Calculate the pH and the pOH of each of the following solutions.
a. 0.200 M HCl
b. 0.0143 M NaOH
c. 3.0 M HNO3
d. 0.0031 M Ca(OH)2
9. Wine has a pH of 3.6. What are the hydronium and hydroxide ion concentrations?
10. The hydroxide ion concentration in household ammonia is 3.2 x 10-3 M. What is the concentration of hydronium ions?
Answer:
1. Equilibrium expressions:
a. K = [HSO4-][H3O+]/[H2SO4][H2O]
b. K = [NO]^4[H2O]^6/[NH3]^4[O2]^5
c. K = [NH3][HCl]/[NH4Cl]
d. K = [NO2]^2/[N2O4]
2. Since K = 0.050, the concentrations of the reactants (N2 and H2) are larger than the concentrations of the products (NH3).
3. Since K = 6.8 x 10^3, the concentrations of the products (SO2 and O2) are larger than the concentrations of the reactant (SO3).
4. The Ksp expression for each of the reactions is:
a. Ksp = [Na+][Cl-]
b. Ksp = [Ba2+][SO42-]
5. Brønsted-Lowry acids and bases:
a. Acid: HNO3; Conjugate base: NO3-; Base: H2O; Conjugate acid: H3O+
b. Acid: HCN; Conjugate base: CN-; Base: H2O; Conjugate acid: HCN
c. Acid: H2SO4; Conjugate base: HSO4-; Base: Cl-; Conjugate acid: HCl
d. Acid: NH3; Conjugate base: NH2-; Base: H2O; Conjugate acid: NH4+
e. Acid: H2O; Conjugate base: OH-; Base: O2-; Conjugate acid: OH-
6. Conjugate acids and bases:
a. Acid: H2O; Conjugate base: OH-
b. Acid: H3O+; Conjugate base: H2O
c. Acid: H2CO3; Conjugate base: HCO3-
d. Acid: NH4+; Conjugate base: NH3
e. Acid: HSO4-; Conjugate base: SO42-
7. The strongest acid is HIO4 (highest K value), followed by HCN, HC2H3O2, and H2CO3 (lowest K value). The K values represent the degree to which the acids dissociate in solution. HIO4 is a strong acid, meaning it dissociates almost completely in solution, while H2CO3 is a weak acid, meaning it only dissociates partially.
8. pH and pOH calculations:
a. pH = -log[H3O+] = -log(0.200) = 0.699; pOH = -log[OH-] = -log(1.0 x 10^-14/0.200) = 12.301
b. pOH = -log[OH-] = -log(0.0143) = 1.844; pH = 14.000 - pOH = 12.156
c. pH = -log[H3O+] = -log(3.0) = 0.522; pOH = 13.478
d. pOH = -log[OH-] = -log(0.0062) = 2.206; pH = 14.000 - pOH = 11.794
9. Hydronium and hydroxide ion concentrations:
pH = 3.6; hydronium ion concentration = 10^-pH = 3.98 x 10^-4 M; hydro
(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)
!!!50 points!!!
Problem 1. What masses of 15% and 20% solutions are needed to prepare 200 g of 17% solution?
Problem 2. What masses of 18% and 5% solutions are needed to prepare 300 g of 7% solution?
Problem 3. 200 g of 15% and 350 g of 20% solutions were mixed. Calculate mass percentage of final solution.
Problem 4. 300 g of 15% solution and 35 g of solute were mixed. Calculate mass percentage of final solution.
Problem 5. 400 g of 25% solution and 150 g of water were mixed. Calculate mass percentage of final solution.
Answer:
See Below.
Explanation:
Problem 1
Let x be the mass of 15% solution needed and y be the mass of 20% solution needed. Then, we have the following system of equations:
x + y = 200 (total mass of solution)
0.15x + 0.20y = 0.17(200) (total amount of solute)
Solving this system of equations gives:
x = 60 g (mass of 15% solution)
y = 140 g (mass of 20% solution)
Therefore, 60 g of 15% solution and 140 g of 20% solution are needed to prepare 200 g of 17% solution.
Problem 2
Let x be the mass of 18% solution needed and y be the mass of 5% solution needed. Then, we have the following system of equations:
x + y = 300 (total mass of solution)
0.18x + 0.05y = 0.07(300) (total amount of solute)
Solving this system of equations gives:
x = 120 g (mass of 18% solution)
y = 180 g (mass of 5% solution)
Therefore, 120 g of 18% solution and 180 g of 5% solution are needed to prepare 300 g of 7% solution.
Problem 3
The total mass of the final solution is
200 g + 350 g = 550 g
The total amount of solute in the final solution is:
0.15(200 g) + 0.20(350 g) = 95 g + 70 g = 165 g
Therefore, the mass percentage of the final solution is:
(mass of solute / total mass of solution) x 100% = (165 g / 550 g) x 100% = 30%
Therefore, the mass percentage of the final solution is 30%.
Problem 4
The total mass of the final solution is
300 g + 35 g = 335 g
The total amount of solute in the final solution is:
0.15(300 g) + 35 g = 75 g + 35 g = 110 g
Therefore, the mass percentage of the final solution is:
(mass of solute / total mass of solution) x 100% = (110 g / 335 g) x 100% = 32.8%
Therefore, the mass percentage of the final solution is 32.8%.
Problem 5
The total mass of the final solution is
400 g + 150 g = 550 g
The total amount of solute in the final solution is
0.25(400 g) = 100 g
Therefore, the mass percentage of the final solution is
(mass of solute / total mass of solution) x 100% = (100 g / 550 g) x 100% = 18.2%
Therefore, the mass percentage of the final solution is 18.2%.
write a balanced equation for the redox reaction between calcium metal and oxygen gas
a balanced equation for the redox reaction: 2 Ca(s) + O2(g) → 2 CaO(s)
What is a redox reaction?A redox reaction is a type of chemical reaction that involves the transfer of electrons between species. One species undergoes oxidation (loses electrons) while another species undergoes reduction (gains electrons).
Which species is being oxidized and which species is being reduced in the reaction between calcium metal and oxygen gas?In the reaction between calcium metal and oxygen gas, the calcium metal is being oxidized (loses electrons) and the oxygen gas is being reduced (gains electrons). This can be seen in the balanced equation where the calcium atoms go from having an oxidation state of 0 to +2, while the oxygen atoms go from having an oxidation state of 0 to -2.
Learn more about redox reaction here:
https://brainly.com/question/13293425
#SPJ1
what happens when zinc chloride reacts with potassium hydroxide and what formed?
Answer:
when the solution of potassium hydroxide and zinc chloride are mixed,the double-displacement reaction occur ,resulting in precipitation and the reaction forms potassium chloride and zinc hydroxide .
A 106 mL solution of a dilute acid is added to 157 mL of a base solution in a coffee-cup calorimeter. The temperature of the solution increases from 22.94 oC to 27.29 oC. Assuming the mixture has the same specific heat (4.184J/goC) and density (1.00 g/cm3) as water, calculate the heat (in J) transferred to the surroundings, qsurr.
Answer:
4897 J
Explanation:
The heat transferred to the surroundings, q_surr, can be calculated using the equation:
q_surr = -q_rxn = -CmΔT
where C is the specific heat capacity of the mixture (assumed to be the same as water, 4.184 J/g°C), m is the mass of the mixture (which we can calculate using the density, assuming that the volumes are additive), and ΔT is the change in temperature (in Celsius).
First, let's calculate the mass of the mixture:
density of water = 1.00 g/cm^3
volume of mixture = volume of acid + volume of base = 106 mL + 157 mL = 263 mL = 0.263 L
mass of mixture = density of water x volume of mixture = 1.00 g/cm^3 x 0.263 L = 263 g
Next, let's calculate the change in temperature:
ΔT = final temperature - initial temperature = 27.29°C - 22.94°C = 4.35°C
Now we can calculate the heat transferred to the surroundings:
q_surr = -CmΔT
q_surr = -(4.184 J/g°C) x (263 g) x (4.35°C)
q_surr = -4897 J
Note that the negative sign indicates that heat is lost by the system to the surroundings. Therefore, the heat transferred to the surroundings, q_surr, is 4897 J.
1) what is the empirical formula of a molecule containing 65.5% carbon, 5.5% hydrogen, and 29% oxygen? worksheet
The empirical formula of a molecule containing 65.5% carbon, 5.5% hydrogen, and 29% oxygen is CH2O.
To calculate this, you need to first convert the percentage composition into mass composition. This is done by multiplying the percentages by the molecular weight of each element.
Carbon: 65.5% x 12 g/mol = 0.786 g/mol
Hydrogen: 5.5% x 1 g/mol = 0.055 g/mol
Oxygen: 29% x 16 g/mol = 0.464 g/mol
Now that you have the mass composition, you can calculate the moles of each element by dividing the mass of each element by its molar mass.
Carbon: 0.786 g/mol / 12 g/mol = 0.065 mol
Hydrogen: 0.055 g/mol / 1 g/mol = 0.055 mol
Oxygen: 0.464 g/mol / 16 g/mol = 0.029 mol
Finally, divide each element's moles by the smallest moles to get the empirical formula.
Carbon: 0.065 mol / 0.029 mol = 2.24 = 2 mol
Hydrogen: 0.055 mol / 0.029 mol = 1.90 = 1 mol
Oxygen: 0.029 mol / 0.029 mol = 1.00 = 1 mol
Therefore, the empirical formula of the molecule is CH2O.
For more such questions on empirical formula , Visit:
https://brainly.com/question/1603500
#SPJ11
Which statement below correctly describes their relative atomic radii and first ionization energy when comparing Se and Br? The atomic radius for Se is larger than Br, and the first ionization energy for Se is greater than Br. The atomic radius for Br is larger than Se, and the first ionization energy for Bris greater than Se. The atomic radius for Se is larger than Br, and the first ionization energy for Br is greater than Se. The atomic radius for Br is larger than Se, and the first ionization energy for Se is greater than Br.
At has a higher initial ionisation energy than Br, while Br has a bigger atomic radius. Se has a bigger atomic radius than Br, and Br has a higher initial ionisation energy than Se.
How do atomic radii and ionisation energy relate to one another (i.e., what happens to ionisation energy as atomic radii grow)?The most loosely bound electron is further from the nucleus and thus easier to remove in bigger atoms. Hence, the ionisation energy should decrease as size (atomic radius) increases.
Why does ionisation energy rise across a period while decreasing down a group?This is because the outer electrons aren't bound as strongly because they are farther from the nucleus.
To know more about ionisation energy visit:-
brainly.com/question/27356170
#SPJ1
Can some please help with the picture below
The completed table of maximum moles of water, limiting reactant and excess reactant is as follows:
Q: 6 moles, O₂, 1 mole H₂
R: 6 moles, O₂, 2 moles H₂
S: 5 moles, none, none
T: 5 moles, H₂, 2.5 moles O₂
U: 8 moles, H₂, 2 moles O₂
What is the mole ratio of the reaction of hydrogen and oxygen to form water?The mole ratio of the reaction of hydrogen and oxygen to form water is obtained from the equation of the reaction.
The equation of the reaction is given below:
2 H₂ + O₂ --> 2 H₂O
The mole ratio of hydrogen to oxygen is 2:1 in both the water molecule and the reactants, hydrogen gas (H2) and oxygen gas, as can be seen from the balanced equation (O2).
Learn more about mole ratio at: https://brainly.com/question/30632038
#SPJ1
How many calories are required to raise the temperature of a 35.0 g sample from 35 °C to 85 °C? The sample has a specific heat of 0.108 cal/g °C.
Answer:
First, we need to calculate the change in temperature:
ΔT = final temperature - initial temperature
ΔT = 85 °C - 35 °C
ΔT = 50 °C
Next, we can use the following formula to calculate the heat energy required:
Q = m·C·ΔT
where Q is the heat energy in calories, m is the mass of the sample in grams, C is the specific heat in cal/g °C, and ΔT is the change in temperature in °C.
Plugging in the given values, we get:
Q = 35.0 g · 0.108 cal/g °C · 50 °C
Q = 189.0 calories
Therefore, 189.0 calories are required to raise the temperature of the sample from 35 °C to 85 °C
Consider the following silica gel TLC plate of compounds A, B, and C developed in hexanes:
Consider the following silica gel TLC plate of com
a) Determine the R f values of compounds A, B, and C run on a silica gel TLC plate using hexanes as the solvent
b) Which compound, A, B, or C, is the most polar?
c) What would you expect to happen to the R f values if you used acetone instead of hexanes as the eluting solvent? (Think polarity of solvents)
The R f values for compounds A, B, and C on a silica gel TLC plate developed in hexanes would be determined by measuring the distance each compound traveled compared to the distance the solvent traveled.
a) There is a 4 cm gap between the origin and the solvent front. The Rf value for spot A is[tex]\frac{1.5}{4}= 0.375[/tex], because it travelled 1.5 cm. Due to the 3.5 cm movement of Spot B, its Rf is[tex]\frac{3.5}{4} = 0.875[/tex]. Spot C shifted 3 cm, making its Rf [tex]\frac{3}{4} = 0.75[/tex].
b)Due to its shorter travel distance than the other two compounds, compound A is the most polar. Recall that polar substances adhere to the adsorbent more readily, move less, and have a lower Rf value.
c)Hexanes is less polar than acetone as a solvent. Each of the three compounds would move more quickly if the same method were employed to elute them.The chemicals can be removed from the polar adsorbent more effectively with a more polar eluting solvent. Each compound would have a higher Rf value if acetone were used to elute the TLC plate as opposed to hexanes because each compound travels more quickly.
learn more about Rf value Refer:brainly.com/question/17796724
#SPJ1
For the following reaction, which of the reactants would be the acid?
HNO2 ( aq ) + HS - ( aq ) → NO2 - ( aq ) + H2S ( aq )
Select one:
a.
HS -
b.
H2O
c.
NO2 -
d.
HNO2
(Chem 2 Quiz 3.1)
The acid in the reaction would donate a proton and that would be HNO2.
How do you know an acid in a reaction?An acid in a chemical reaction can be identified by the presence of hydrogen ions (H+): Acids are compounds that produce hydrogen ions when dissolved in water. In a chemical reaction, an acid may donate a hydrogen ion to another compound or accept a pair of electrons from a base.
When we look at the reaction, we can see that the specie that has given out the replaceable hydrogen ion is HNO2 thus it is the acid in the reaction.
Learn more about acid:https://brainly.com/question/14072179
#SPJ1
Menthol is composed of C, H, and O. A 0.1005g sample of menthol is combusted, producing 0.2829g of CO2 and 0.1159g H2O. What is the empirical and molecular formula for menthol?
The empirical formula, CH2O9(menthol) is multiplied by 5 to get the molecular formula, C10H20O.The empirical and molecular formula for menthol are CH2O and C10H20O, respectively.
The molecular formula for menthol is C5H10O.
This can be determined by dividing the molar mass of the empirical formula (156.26 g/mol) by the molar mass of CO2 (44.01 g/mol). This gives a ratio of 3.55, which is equal to the ratio of C atoms in the empirical formula, C10H20O.
Therefore, the molecular formula is C5H10O.
Given:
Menthol is composed of C, H, and O0.1005g sample of menthol is combusted and produces0.2829g of CO2 0.1159g H2O
1. Find: Empirical and molecular formula for menthol.
Let's first calculate the number of moles of CO2 produced. The balanced equation for combustion of menthol is:
C10H20O(s) + 12O2(g) → 10CO2(g) + 10H2O(l)
From the above equation, we can see that for 10 moles of CO2 produced 1 mole of menthol is required.
2. By taking the number of moles of CO2 produced, we can calculate the number of moles of menthol burned.
Moles of CO2 = 0.2829g / 44.01g/mol= 0.00643 mol
C10H20O(s) + 12O2(g) → 10CO2(g) + 10H2O(l)
From the balanced equation,1 mole of C10H20O requires 10 moles of CO2
Moles of C10H20O burned = 10 * 0.00643= 0.0643 mol
Next, we can calculate the number of moles of H2O produced.
Moles of H2O = 0.1159g / 18.015g/mol= 0.00643 mol
C10H20O(s) + 12O2(g) → 10CO2(g) + 10H2O(l)
From the balanced equation,1 mole of C10H20O requires 10 moles of H2O
Moles of C10H20O burned = 10 * 0.00643= 0.0643 mol
3. Now we can calculate the empirical formula of menthol. The empirical formula can be calculated as follows:
Empirical formula = CH2O (Divide all moles by smallest moles) The molecular weight of CH2O = 30 g/mol
The empirical formula mass of the compound is:
mass = (12.011 + 2*1.008 + 15.999) = 30.026
Empirical formula mass of CH2O is 30.026g/mol, and the given sample weighs 0.1005 g.
The number of empirical formula units in the sample is 0.1005 g / 30.026 g/mol = 0.003348Units.
Empirical formula = CH2OThe empirical formula weight of menthol is CH2O, which is equal to 30.026g/mol.
4. To find the molecular formula, we need to know the molecular weight of the menthol. We can calculate it as follows:
Molecular formula mass = Empirical formula mass x n
Where n = integer Molecular formula mass of menthol is 156 g/mol, and the empirical formula mass is 30.026 g/mol.
So, n = 156 g/mol ÷ 30.026 g/mol = 5.192
Thus the empirical formula, CH2O is multiplied by 5 to get the molecular formula, C10H20O.The empirical and molecular formula for menthol are CH2O and C10H20O, respectively.
For more such questions on empirical formula , Visit:
https://brainly.com/question/1603500
#SPJ11
How do the number of collisions affect the size of the balloon?
Answer:
As the number of gas particles increases, the frequency of collisions with the walls of the container must increase. This, in turn, leads to an increase in the pressure of the gas. Flexible containers, such as a balloon, will expand until the pressure of the gas inside the balloon once again balances the pressure of the gas outside.
Explanation:
which the following optically active alcohol is treated with hbr, a racemic mixture of alkyl bromides is obtained
(S)-2-butanol will undergo an SN2 reaction with HBr to produce a racemic mixture of alkyl bromides. Here option B is the correct answer.
When optically active alcohol is treated with HBr, the reaction follows an SN1 or SN2 mechanism. In the case of SN1, a carbocation intermediate is formed, and in SN2, a backside attack by the nucleophile occurs. The stereochemistry of the product depends on the configuration of the intermediate and the direction of attack.
In the case of (S)-2-butanol, the hydroxyl group is attached to the second carbon atom, which makes it a primary alcohol. When treated with HBr, it undergoes an SN2 reaction, where the hydroxyl group is replaced by the bromine atom. The nucleophile attacks from the backside of the molecule, leading to an inversion of configuration.
This results in the formation of a racemic mixture of alkyl bromides, as both enantiomers have an equal chance of being attacked from either side. On the other hand, (R)-2-butanol, being the enantiomer of (S)-2-butanol, will also undergo the same reaction and produce the same racemic mixture of alkyl bromides.
In the case of (R)-1-phenyl ethanol and (S)-1-phenyl ethanol, they are secondary alcohols and can undergo either SN1 or SN2 reactions depending on the reaction conditions. However, the reaction mechanism will lead to the formation of a mixture of diastereomers, rather than a racemic mixture of enantiomers.
To learn more about alkyl bromides
https://brainly.com/question/29031148
#SPJ4
Complete question:
Which of the following optically active alcohols, when treated with HBr, results in a racemic mixture of alkyl bromides?
a) (R)-2-butanol
b) (S)-2-butanol
c) (R)-1-phenyl ethanol
d) (S)-1-phenyl ethanol
How many moles are in 3.19 × 1016 molecules of NOs?
There are approximately 0.005302 moles of NOs in 3.19 × 10^16 molecules.
What is moles ?
Mole is an SI unit used to measure the amount of any substance.
To calculate the number of moles of NOs in 3.19 × 10^16 molecules, we need to use Avogadro's number, which is 6.022 × 10^23 molecules per mole.
First, we need to convert the number of molecules to moles using the formula:
moles = molecules / Avogadro's number
moles of NOs = 3.19 × 10^16 molecules / 6.022 × 10^23 molecules per mole
moles of NOs = 0.005302 moles (rounded to 4 significant figures)
Therefore, there are approximately 0.005302 moles of NOs in 3.19 × 10^16 molecules.
Learn more about moles here : brainly.com/question/29367909
#SPJ1
The number of moles present in 3.19×10¹⁶ molecules of nitrogen dioxide, NO₂ is 5.30×10⁻⁸ mole
How do i determine the number of moles present?The number of moles present in 3.19×10¹⁶ molecules of NO₂ can be obtained by using the Avogadro's hypothesis as illustrated below:
Number of molecules = 3.19×10¹⁶ moleculesNumber of mole of NO₂ =?From Avogadro's hypothesis,
6.022×10²³ molecules = 1 mole of NO₂
Therefore,
3.19×10¹⁶ molecules = 3.19×10¹⁶ / 6.022×10²³
3.19×10¹⁶ molecules = 5.30×10⁻⁸ mole of NO₂
Thus, we can conclude that the number of mole is 5.30×10⁻⁸ mole
Learn more about mole:
https://brainly.com/question/13314627
#SPJ1
