the adolescent brain tends to have more mature pleasure-seeking systems and less advanced systems for controlling behavior.

Answer:

Table salt.

Explanation:

Table salt would shatter when hit with a hammer.

Answer:

As the number of gas particles increases, the frequency of collisions with the walls of the container must increase. This, in turn, leads to an increase in the pressure of the gas. Flexible containers, such as a balloon, will expand until the pressure of the gas inside the balloon once again balances the pressure of the gas outside.

Explanation:

If all is working correctly, the electron in a higher orbital or shell will have more energy than the electron in a lower orbital or shell. The following statement is correct: The electron that is farther away from the nucleus is at a higher energy level.

In order for the electron to escape from the atom, it must be excited, meaning that it must absorb energy. When this occurs, the electron moves to a higher energy level, which is farther from the nucleus. Because the electron is now in an excited state, it is more vulnerable to being released from the atom if additional energy is provided to it. According to Bohr's model of the atom, electrons revolve around the nucleus in circular orbits with varying energy levels. As the distance between the nucleus and the electron increases, so does the energy level of the electron. The energy of electrons in the first energy level is the lowest, and as the energy level increases, so does the energy of electrons. As a result, electrons in the outermost shell have the highest energy levels.

To learn more about Nucleus :

https://brainly.com/question/9651421

#SPJ11

Explanation:

The reactant contains 2N and 6H

The product contains 2N and 6H

Therefore, the chemical equation is balanced

From the equation, for every 1 mole of N2 that reacts, 3 moles of H2 are required.

We know 28.6 grams of N2 reacted, but we don’t know the mass ratio but just the mole ratio, so we have to convert 28.6 grams of N2 to the corresponding moles of N2.

From the periodic table, the molar mass of N is about 14 g/mol, so the molar mass of nitrogen gas or N2 is two times of that which is 28 g/mol.

With this, we can calculate moles of N2, but we also need to make sure the equation is setted up the right way.

Looking at the units, if we cancel out the grams, we are left with mol. We also know that in multiplication, numerator of one number cancel with the denominator of another number and vice versa

So the equation looks like this 28.6g * mol/28g = 1.021 mol N2

So the number of moles of H2 required is 1.021 mol N2 * 3 mol H2/1 mol N2 = 3.063 mol H2 (notice that mol N2 canceled out, so the equation is set up correctly)

However, the question ask for number of grams of H2 needed, so we need the molar mass of hydrogen gas or H2, which is 1*2 = 2 g/mol

3.063 mol H2 * 2 g H2/ mol H2 = 6.126 g H2

Ans: 6.126 g H2

The completed table of maximum moles of water, limiting reactant and excess reactant is as follows:

Q: 6 moles, O₂, 1 mole H₂

R: 6 moles, O₂, 2 moles H₂

S: 5 moles, none, none

T: 5 moles, H₂, 2.5 moles O₂

U: 8 moles, H₂, 2 moles O₂

The mole ratio of the reaction of hydrogen and oxygen to form water is obtained from the equation of the reaction.

The equation of the reaction is given below:

2 H₂ + O₂ --> 2 H₂O

The mole ratio of hydrogen to oxygen is 2:1 in both the water molecule and the reactants, hydrogen gas (H2) and oxygen gas, as can be seen from the balanced equation (O2). 

Learn more about mole ratio at: https://brainly.com/question/30632038

#SPJ1

The root mean square speed of F2(g) molecules under the same conditions is approximately 431.3 m/s.

The root mean square (rms) speed of a gas molecule is related to its average kinetic energy (KE) by the following equation:

rms speed = √(3RT/M)

Where

To solve for the rms speed of F2(g) molecules, we need to know the temperature and molar mass of F2(g). Let's assume that the temperature is the same as the conditions in which He(g) has an average kinetic energy of 7450 J/mol. The molar mass of F2 is 2 x the molar mass of one fluorine atom, which is approximately 19 amu.

Substituting these values into the equation, we get:

Now we can solve for the rms speed by plugging in the given value of average kinetic energy for He(g) and solving for T:

7450 J/mol = (1/2) x (3/2) x R x T

T = 7450 J/mol / (1.5 x 8.314 J/mol·K)

T = 597 K

Substituting this value of T into the equation for rms speed, we get:

rms speed = √(0.6564 J/K x mol x 597 K / 1 mol)

rms speed = 431.3 m/s

Therefore, the root mean square speed of F2(g) molecules under the same conditions is approximately 431.3 m/s.

Learn more about average kinetic energy here : brainly.com/question/492249

#SPJ1

According to the question Synthesis and Decomposition reaction types are reversible.

Reversible items are those that can be returned to their original state after being altered or changed in some way. Examples of reversible items include clothing items with zippers or buttons, items that can be folded or unfolded, items with removable parts, and items that can be reconfigured. Reversible items can be used multiple times, which helps reduce waste and save money. Additionally, reversible items can be used in a variety of different ways, giving them more versatility than non-reversible items. Reversible items can also be reconfigured to fit different needs and situations. For example, a reversible shirt can be worn with the buttons on the front or the back, giving it a different look each time it is worn. Reversible items are a great way to be more eco-friendly and get the most out of your wardrobe.

To learn more about reversible

https://brainly.com/question/21426719

#SPJ1

The reversible reaction types include Synthesis and Decomposition.

The chemical processes known as reversible reactions are those that can go both forward and backward.

These processes are also referred to as bidirectional processes. Typically, a reversible reaction is represented as A⇌B

A is the reactant and B is the product in this instance.

Reactant: A chemical reaction begins with reactants or starting ingredients. Chemical bonds between reactants are broken and new ones are made to create products during this chemical transformation. A is the reactant in this scenario, while B is the outcome.

To know more about the reversible reaction visit:

https://brainly.com/question/16614705

#SPJ1

The total amount of energy necessary to heat and vaporize a 13.1 g sample of ethanol initially at a temperature of 11.1 degrees C is 7.15 kJ.

To calculate the amount of energy, in joules, necessary to heat and vaporize a 13.1 g sample of ethanol initially at a temperature of 11.1 degrees C, we must first calculate the heat necessary to heat the sample to the boiling point of ethanol, 78.3 degrees C. The formula to calculate the amount of energy is: Q = mcΔT, where m is the mass of the sample, c is the specific heat of ethanol, and ΔT is the temperature change from 11.1 degrees C to 78.3 degrees C. Thus, the amount of energy necessary to heat the sample is: Q = 13.1 g * 2.44 JK−1g−1 * (78.3-11.1) = 1,623.08 J.
Next, we must calculate the amount of energy necessary to completely vaporize the sample. To do so, we must use the heat of vaporization of ethanol, which is 38.56 kJ mol−1. To convert from moles to grams, we must use the molar mass of ethanol, which is 46 g/mol. Thus, the amount of energy necessary to vaporize the sample is: Q = (13.1 g/46 g/mol) * 38.56 kJ/mol = 7.15 kJ.
Finally, to calculate the total amount of energy necessary to heat and vaporize the sample, we must add the two values together: Q = 1,623.08 J + 7.15 kJ = 7.15 kJ. the total amount of energy necessary to heat and vaporize a 13.1 g sample of ethanol initially at a temperature of 11.1 degrees C is 7.15 kJ.

For more such questions on ethanol

https://brainly.com/question/29523373

#SPJ11

Answer:

Mg (s) + 2 HCl (aq) → MgCl 2 (aq) + H 2 (g)

Explanation:

Answer:

C

Explanation:

PHYSICS

a gaseous substance that is below its critical temperature, and can therefore be liquefied by pressure alone.

Carbon's unique properties such as having a valence of four, the ability to form various types of bonds including double and triple bonds, and its tetrahedral structure.

a. The carbon atom's valence of four enables it to form up to four covalent bonds with other atoms, allowing for the formation of diverse organic molecules. This property makes carbon the backbone of many biological molecules, including carbohydrates, lipids, proteins, and nucleic acids.

b. The high bond energy of carbon-carbon bonds makes them stable and resistant to breaking under normal physiological conditions, contributing to the stability of biological molecules. This property allows for the formation of complex macromolecules, such as enzymes and DNA, which are essential to life.

c. Carbon's relatively low atomic weight allows it to form strong covalent bonds without adding significant mass to the molecule. This property is essential for the formation of large and complex biological molecules, which require many carbon atoms to function properly.

d. The ability of carbon to form single, double, and triple bonds allows for the formation of diverse molecular structures, including cyclic structures and branching chains. This property contributes to the diversity of organic molecules found in living organisms, allowing for the creation of molecules with specific functions.

e. The tetrahedral structure of the carbon atom enables it to form strong and stable bonds with other atoms while maintaining a relatively stable geometry. This property is essential for the formation of complex three-dimensional structures in proteins and other biological molecules, allowing them to perform specific functions within cells.

Learn more about carbon bond here: https://brainly.com/question/12156863

#SPJ1

Answer:

the answer is for surely C

Explanation:

you can tell from the way is made and I also have one in my room

The interaction between Arrhenius acid and base, which produces salt and water as a byproduct, is referred to as a neutralisation reaction. Strong acids include substances like HCl, HNO3, H2SO4, etc.

The term "Arrhenius acid" refers to a material that contains a hydrogen atom that readily releases a hydrogen ion and proton when it is in contact with water. For instance, when hydrochloric acid dissolves in water, it produces the ions hydronium (H3O+) and chloride (Cl-).

The hydrogen ion (H+) is one of the electrically charged molecules or atoms that are produced when an acid dissociates in water, according to the Arrhenius theory, which was first proposed by Swedish scientist Svante Berzelius in 1887. On the other hand, bases ionise in water to produce hydroxide ions (OH).

To know more about neutralisation visit:

https://brainly.com/question/27435656

#SPJ1

Answer:

To determine if the solution is saturated or unsaturated, we need to compare the amount of NaCl in the solution to its solubility in water at the given temperature.

The solubility of NaCl in water at room temperature (25°C) is approximately 36 grams per 100 grams of water, or 0.36 g/g. This means that at 25°C, water can dissolve up to 0.36 grams of NaCl per gram of water.

In this case, we have 2.75 grams of NaCl dissolved in 650 grams of water. To find the concentration of NaCl in the solution, we divide the mass of NaCl by the total mass of the solution:

concentration of NaCl = mass of NaCl / total mass of solution

concentration of NaCl = 2.75 g / (2.75 g + 650 g)

concentration of NaCl = 0.0042 g/g

Comparing the concentration of NaCl in the solution to its solubility in water at 25°C, we see that:

0.0042 g/g < 0.36 g/g

Since the concentration of NaCl in the solution is less than its solubility in water, the solution is unsaturated.

Explanation:

Answer:

true

The water cycle affects the weather and climate of a particular region in multiple ways

Answer:

50 ml

Explanation:

n = moles

c = concentration

v = volume

n = c × v

HCl + NaOH --> NaCl + H2O

HCl:

50 ml = 50 cm³ = 0.05 dm³

n = 0.05 × 0.1

n = 0.005

Ratio of HCl to NaOH:

HCl : NaOH

Based on reaction equation:

1 : 1

0.005 : x

x = 0.005

NaOH:

0.005 = 0.1 × v

v = 0.05

0.05 dm³ = 50 cm³ = 50 ml

The correct answer is bleaching of hair with hydrogen peroxide, curdling of milk by rennin and straightening frizzy hair by conditioner.

Protein denaturation is the process by which a protein loses its shape and function due to exposure to certain environmental conditions such as heat, pH, pressure, or chemical agents. The denaturation process can cause the protein's structure to unravel, leading to the loss of its biological activity. This happens because the protein's three-dimensional structure is crucial to its function, and when the structure is altered, the protein may no longer be able to perform its intended function.

Protein denaturation can occur reversibly or irreversibly depending on the extent of the damage to the protein's structure. Reversible denaturation occurs when the protein regains its structure and function once the environmental stressor is removed, while irreversible denaturation occurs when the damage is permanent and the protein cannot regain its function.

To know more about protein denaturation, visit:

https://brainly.com/question/19756195

#SPJ1

The full question is:

The denaturing of proteins occurs when the stabilizing forces are altered. Below is the set of processes in which proteins are denatured. Write the chemicals necessary for the denaturation to occur

1. Bleaching of hair

2. Curdling of milk

3. Straightening frizzy hair

There are approximately 0.005302 moles of NOs in 3.19 × 10^16 molecules.

Mole is an SI unit used to measure the amount of any substance.

To calculate the number of moles of NOs in 3.19 × 10^16 molecules, we need to use Avogadro's number, which is 6.022 × 10^23 molecules per mole.

First, we need to convert the number of molecules to moles using the formula:

moles = molecules / Avogadro's number

moles of NOs = 3.19 × 10^16 molecules / 6.022 × 10^23 molecules per mole

moles of NOs = 0.005302 moles (rounded to 4 significant figures)

Therefore, there are approximately 0.005302 moles of NOs in 3.19 × 10^16 molecules.

Learn more about moles here : brainly.com/question/29367909

#SPJ1

The number of moles present in 3.19×10¹⁶ molecules of nitrogen dioxide, NO₂ is 5.30×10⁻⁸ mole

The number of moles present in 3.19×10¹⁶ molecules of NO₂ can be obtained by using the Avogadro's hypothesis as illustrated below:

From Avogadro's hypothesis,

6.022×10²³ molecules = 1 mole of NO₂

Therefore,

3.19×10¹⁶ molecules = 3.19×10¹⁶  / 6.022×10²³

3.19×10¹⁶ molecules = 5.30×10⁻⁸ mole of NO₂

Thus, we can conclude that the number of mole is 5.30×10⁻⁸ mole

Learn more about mole:

https://brainly.com/question/13314627

#SPJ1

In comparison to 310.0 K, the reaction happens 1.28 times faster at 314 K.

A high K value (higher than 1) denotes an equilibrium with more products than reactants, whereas a low K value (less than 1) denotes an equilibrium with more reactants than products.

The Arrhenius equation, which connects the rate constant (k) to the activation energy (Ea) and temperature (T), can be used to determine how much faster the reaction happens at 314 K than it does at 310.0 K. k = A * exp(-Ea / (R * T))

where T is the temperature in Kelvin, R is the gas constant, and A is the preexponential factor.

For this reaction, we can assume that the pre-exponential component is fixed and that the sole variable is temperature.

exp[(Ea / R) * (1/T1 - 1/T2)] = k2 / k1

where Ea is the activation energy, R is the gas constant, k1 is the rate constant at 310.0 K, and k2 is the rate constant at 314 K.

k2 / k1 = exp[(50.0 kJ/mol / (8.314 J/mol•K)) * (1/310.0 K - 1/314 K)] is the result of substituting the provided numbers.

If we condense this phrase, we get:

k2 / k1 = 1.28

To know more about reaction visit:-

https://brainly.com/question/28270550

#SPJ1

The acid in the reaction would donate a proton and that would be HNO2.

An acid in a chemical reaction can be identified by the presence of hydrogen ions (H+): Acids are compounds that produce hydrogen ions when dissolved in water. In a chemical reaction, an acid may donate a hydrogen ion to another compound or accept a pair of electrons from a base.

When we look at the reaction, we can see that the specie that has given out the replaceable hydrogen ion is HNO2 thus it is the acid in the reaction.

Learn more about acid:https://brainly.com/question/14072179

#SPJ1

The average value of the molar volume of hydrogen is 24.0 liters per mole (L/mol).

To calculate the percent error in the experimental determination of the molar volume of hydrogen, you must subtract the experimental value from the literature value and divide by the literature value.

One liter of hydrogen gas at STP has a mass of 0.090 grams, which is the experimental value of the density of hydrogen. This value is lower than the literature value, which is 0.089 grams per liter (g/L).
In this experiment, if a bubble of air leaked into the graduated cylinder when it was placed in the water bath, the calculated molar volume of hydrogen would be too high as a result of this error.

This is because the presence of the bubble of air would increase the measured volume of hydrogen gas.If the magnesium ribbon appeared to be oxidized, the calculated molar volume of hydrogen would be too low as a result of this error.

This is because the oxidation of the magnesium ribbon would reduce the amount of hydrogen gas produced, resulting in a lower measured volume of hydrogen gas. For demonstration purposes, the ideal gas law may be used to calculate the maximum amount or length of magnesium ribbon that may be used.

The ideal gas law equation is PV = nRT, where P is the pressure, V is the volume, n is the amount of substance, R is the ideal gas constant, and T is the temperature. Knowing the desired volume of the gas, the amount of substance can be calculated.

For more such questions on hydrogen

https://brainly.com/question/24433860

#SPJ11

Carbon capture and storage is one experimental method being utilised to lower carbon dioxide emissions from coal (CCS).

One experimental technique being used to reduce carbon dioxide emissions from coal is carbon capture and storage (CCS). With CCS, carbon dioxide emissions from factories or power plants are captured and either stored underground in geological formations or used to improve oil recovery.

Coal and other fossil fuels have the potential to drastically cut their carbon dioxide emissions, but CCS technology currently in the experimental stage. Unfortunately, because of its expensive cost and technical implementation difficulties, the technology is not yet extensively employed.  In order to address the current climate problem, efforts to cut CO2 emissions are essential.

Learn more about carbon dioxide here:

https://brainly.com/question/9419166

#SPJ4

What experimental technology is being used to reduce carbon dioxide emissions from coal?

At 769 K, the rate constant equals 2.22 1/min.

The final expression is either k=A or k=A. This implies that the response rate will be equal to the value of the collision frequency rather than the temperature when the activation energy is zero.

The Arrhenius equation, which connects the rate constant (k) to the activation energy (Ea) and temperature (T), can be used to solve this issue:

[tex]A = * exp (-Ea / (R * T))[/tex]

With the rate constant (k) at 475 K, we can utilize this knowledge to calculate the pre-exponential factor (A) as follows:

0.0450 1/min = A * exp(-13.6 kJ/mol / (8.314 J/mol•K * 475 K))

[tex]A = 5.74 x 10^9 min^-1[/tex]

The rate constant (k) at 769 K can now be calculated using the Arrhenius equation once more as follows:

[tex]k = 5.74 x 10^9 min^-1[/tex] * exp(-13.6 kJ/mol / (8.314 J/mol•K * 769 K))

k = 2.22 1/min (rounded to two significant figures)

To know more about rate constant visit:-

https://brainly.com/question/20305871

#SWPJ1

No, the inverse of the matrix represented as M=[-1 -4] does not exist.

An inverse matrix is a square matrix that, when multiplied by its original matrix, yields the identity matrix. It allows for solving linear equations involving the original matrix.

To determine if a matrix has an inverse, we can compute its determinant. If the determinant is nonzero, then the matrix has an inverse; if the determinant is zero, then the matrix does not have an inverse.

The given matrix M is a 1x2 matrix, so it's not square and it doesn't have an inverse.

Therefore, we can't find the inverse of matrix M.

Learn more about Inverse Matrix:
https://brainly.com/question/4017205
#SPJ1

The equilibrium constant Keq is 640.86 and the equilibrium constant KP is 0.0198 for the given reaction at 298 K.

The balanced chemical equation for the given chemical reaction is:

2NO(g) + 2H₂(g) ⇌ N₂(g) + 2H₂O(g)

where ⇌ indicates a state of equilibrium.

The equilibrium concentrations are:

[NO] = 0.0081 M

[H₂] = 4.1 × 10⁻⁵ M

[N₂] = 5.3 × 10⁻² M

[H₂O] = 2.9 × 10⁻³ M

The equilibrium constant, Keq, is given by:

Keq = [N₂][H₂O]² / [NO]²[H₂]²

Substituting the given values:

Keq = (5.3 × 10⁻²) (2.9 × 10⁻³)² / (0.0081)² (4.1 × 10⁻⁵)²

Keq = 640.86

The equilibrium constant in terms of partial pressures, KP, is related to Keq as follows:

KP = Keq(RT)^Δn

where R is the gas constant, T is the temperature in Kelvin, and Δn is the difference between the total number of moles of gaseous products and the total number of moles of gaseous reactants.

For the given reaction:

Δn = (1 + 2) − (2 + 2) = −1

Substituting the values:

KP = 640.86 (0.08206)(298)⁻¹

KP = 0.0198

Therefore, the equilibrium constant Keq is 640.86 and the equilibrium constant KP is 0.0198 for the given reaction at 298 K.

To know more about equilibrium constant, visit:

https://brainly.com/question/15118952

#SPJ1

The problem that arises when running a spectrum of a neat liquid is that it can be difficult to distinguish the peaks in the spectrum due to the broadening of the baseline.

This is because the baseline broadening is caused by the interaction of the solvent molecules with the solute molecules, which is difficult to avoid. To reduce the baseline broadening, it is necessary to reduce the solvent concentration or use a denser solvent. In addition, it is also important to ensure that the sample is well-mixed, since inhomogeneity in the sample can lead to peak broadening. It is also important to reduce noise in the spectra, since this can lead to peak broadening or obscuring of the peaks. Finally, it is important to carefully choose the range of wavelengths to be measured, since if the range is too wide, then the baseline broadening may obscure the peaks.

In conclusion, the problems that arise when running a spectrum of a neat liquid include baseline broadening, inhomogeneity in the sample, noise in the spectra, and a too wide range of wavelengths being measured. To reduce these issues, it is important to reduce the solvent concentration or use a denser solvent, ensure that the sample is well-mixed, reduce noise in the spectra, and carefully choose the range of wavelengths to be measured.

For more such questions on spectrum

https://brainly.com/question/14783701

#SPJ11

The concentration of the potassium permanganate solution is 72 mol/L. The answer has three significant figures because the volume of the flask has only one significant figure.

The concentration of the potassium permanganate solution can be calculated using the formula:

concentration = moles of solute / volume of solution

where the volume of solution is in liters.

First, we need to convert the volume of the flask from milliliters to liters:

500 mL = 0.500 L

Next, we can calculate the concentration of the solution:

concentration = 36. mol / 0.500 L

concentration = 72 mol/L

The concentration of the potassium permanganate solution is 72 mol/L. The answer has three significant figures because the volume of the flask has only one significant figure.

Learn more on calculating chemical concentrations here https://brainly.com/question/28564792

#SPJ1