Answers
Hi there!
The easiest way to find the charge of q would be to find the "downward" (relative to the page) forces produced by the two positive 2.0nC charges. The force produced by 'q' would have to be equal and in the opposite direction to the sum of these forces.
The force equation involving two charges is:
[tex]F_E = \frac{kq_1q_2}{r^2}[/tex]
[tex]F_E[/tex] = Electrostatic Force (N)
k = Coulomb's Constant (8.99 × 10⁹ Nm²/C²)
q₁, q₂ = Charges (C)
r = distance between charges (m)
Let's begin by finding the electrostatic force between the -2.0 nC charge and one 2.0 nC charge.
(Recall that nC is 10⁻⁹ C and cm is 10⁻² m)
[tex]F_E = \frac{(8.99*10^{9})(2.0*10^{-9})(2.0*10^{-9})}{(\sqrt{0.03^2 + 0.02^2})^2}[/tex]
*We are using the Pythagorean theorem to find the total distance.
Plugging into a calculator:
[tex]F_E = 2.767*10^{-5} N[/tex]
We are only interested in the VERTICAL component of this force, since the 'q' charge is directly in line with the -2.0nC charge and does not produce any horizontal forces.
First, let's find the angle that the 2.0nC charges make with the horizontal.
[tex]tan^{-1}(\frac{2}{3}) = 33.69^o[/tex]
Now, we can plug this value of the angle into sine to find the vertical component of the force.
[tex]F_E(vertical) = F_E sin\theta = F_E sin(33.69) = 1.53 * 10^{-5} N[/tex]
Since there are two charges and the other has the SAME charge, we can simply double this quantity.
[tex]F_E (\text{vertical, total}) = 3.07 *10^{-5} N[/tex]
So, for the -2.0 nC charge to be in equilibrium, the 'q' charge must produce an electrostatic force that is equal to the above total.
[tex]F_E = \frac{kq_1q}{r^2}[/tex]
Rearrange to solve for q.
[tex]q = \frac{r^2 F_E}{kq_1}[/tex]
Plug and solve.
[tex]q = \frac{(0.02^2) (3.07*10^{-5})}{(8.99*10^9)(2.0*10^{-9})}} = 6.83*10^{-10} C[/tex]
So:
[tex]\large\boxed{q = 6.83*10^{-10} C = 0.68 nC}[/tex]
Related Questions
if two objects are falling on with a small mass and the other with a large mass where is the center of mass
Answers
Various objects' respective centers of mass. The center of mass of symmetrical, homogeneous objects is located at the centroid of those objects.
Rings, circles, squares, cuboids, and other similar shapes are examples of symmetrical and uniform things.
Due to this air resistance, Galileo discovered that heavier or more dense things fall more quickly than less dense ones. The feather falls more slowly due to air resistance.
Gravitational acceleration is unaffected by mass in any quantifiable sense. The two amounts don't depend on one another. Only when forces other than gravity are at play do light items accelerate more slowly than heavy objects.
To know more about centers of mass
https://brainly.com/question/15362488
#SPJ4
Design a parallel RLC circuit (see (Figure 1)) with a resonant radian frequency of 5000 rad/s. Take that L 10 mH.a) Find the value of C Express your answer to three significant figures and include the appropriate units. C= 4.00 μFb) Find the value of R so that the response is critically damped. Express your answer to three significant figures and include the appropriate units R- 25.0 Ω
Answers
The value of R so that the response is critically damped using the equation is 25.0Ω.
What is Farads?Farads is the unit of measure for capacitance, which is the amount of electrical charge stored for a given voltage. Farads can be used to measure the amount of energy stored in a capacitor, which is made up of two conductive plates separated by an insulating material. The higher the capacitance, the more energy can be stored in a given capacitor. Farads are named after Michael Faraday, the British scientist who discovered the relationship between electricity and magnetism.
The resonant frequency of an RLC circuit is given by the equation:
ω_r=1/sqrt(LC)
where ω_r is the resonant frequency in rad/s, L is the inductance in Henries, and C is the capacitance in Farads.
Given the resonant frequency of 5000 rad/s and the inductance of 10 mH, we can calculate the capacitance as follows:
C=1/(ω_r^2*L)
C=1/(5000^2*0.01)
C=4.00μF
We can find the value of R so that the response is critically damped using the equation:
R=2*sqrt(L/C)
R=2*sqrt(0.01/4.00)
R=25.0Ω
To learn more about Farads
https://brainly.com/question/24175851
#SPJ1
torch is rated 2.2v.0.25A.calculate the charge passing through the bulb in one second and energy transferred by the passage of each coulomb of charge.
ans-0.25 C and 2.2J
Answers
The Charge is 0.25C while the energy is 0.55 Joules
Calculating the Charge and Energy of a bulbGiven DataVoltage = 2.2volts
Current = 0.25 amperes
Time = 1 Seconds
We know that
I = Qt
0.25 = Q*1
Making charge subject of the formula
Q = 0.25/1
Q = 0.25C
Now let us find Energy
E = QV
E = 0.25*2.2
E = 0.55 Joules
What is the definition of charge:
A charge is a physical property that causes matter in an electromagnetic field to experience a force.
Learn more about Charge here:
https://brainly.com/question/25923373
#SPJ1
what evidence does this graph provide to support the law of conservation of energy? Provide numerical data.
Answers
Explanation:
1. in any time the sum of Kinetic and Potential energies is the same value;
2. there are 4 points in interval from 0 to 50 seconds (see the attachment) and:
- when t=0, then Kinetic energy is 0 and the Potential one is 500 [J];
- when t=20, then Kinetic energy is 200 and the Potential one is 300 [J];
- when t=25, then Kinetic energy (250[J]) equals the Potential one(250[J]);
- when t=50, then Kinetic energy is 500 and the Potential one is 0.
he is driving on a motorcycle at 18 m/s as he passes over the top of a hill whose radius of curvature is 142m
Answers
The magnitude of centripetal force is 684.50 N and the magnitude of normal force is 2258.5 N.
Force is an external influence that can change the velocity or motion of an object.
It can also be defined as the product of mass and acceleration.Mathematically, force F = m*aSpeed of the motorcycle = v = 18 m/s
Radius of curvature of the hill top = r = 142 m
Total mass of the motorcycle and driver = m = 300 kg
A centripetal force is a force acting on an object in a curvilinear motion toward the axis of rotation or center of curvature.
Mathematically, it is Fc = (mv²)/r
Fc = (300 * 18²) / (142)
Fc = 684.50 N
Normal force (N) acting on the motorcycle can be calculated by the equation:
Fc = mg - N
684.50 = (300 * 9.81) - N
N = 2943 - 684.5
N = 2258.5 N
Therefore the magnitude of centripetal force is 684.50 N and the magnitude of normal force is 2258.5 N.
The question is incomplete, the complete question is "he is driving on a motorcycle at 18 m/s as he passes over the top of a hill whose radius of curvature is 142m. The mass of the motorcycle and driver is 300 kg. Find the magnitudes of the following.
a) magnitude of centripetal force
b) magnitude of normal force
To know more about force,
https://brainly.com/question/15343432
#SPJ4
Two carts on an air track have the same mass and speed and are traveling toward each other. If they collide and stick together, find the total momentum and total kinetic energy of the HINT (a) the total momentum O The final momentum is zero. O The final momentum is half the initial momentum. O The final momentum is twice the initial momentum. O There is not enough information to tell.
Answers
If they collide and remain united then the total momentum of the system is zero.
Total momentum by using the Principle of Momentum Conservation,
m* Va-m* Va=2* Vb
Final speed and total momentum of system = zero
p = 0
Due to the inelastic impact and the same masses and speeds, the system's total kinetic energy is reduced to zero. Before and after a collision, the total kinetic energy are, respectively:
Ka = mv²
Kb = 0
The combination of a particle's mass and velocity produces momentum.
A vector quantity with both magnitude and direction is momentum. Isaac Newton's second equation of motion states that the force applied to a particle is equivalent to the time rate of change of momentum.
Any grouping of particles has a momentum equal to the vector sum of their momenta. A modification in one particle's momentum is perfectly balanced by a modification in the momentum of another particle, according to Newton's third law, which states that particles exert equal and opposite forces on one another.
To know more about momentum:
https://brainly.com/question/29586316
#SPJ4
Students will design an experiment to determine how the magnitude of the force on a segment of straight, current-carrying wire depends on the length of the wire segment and on the strength of the magnetic field. Which of the following experimental procedures will allow the students to determine both of these relationships? A Making measurements of the force on several different straight segments of wire, increasing the length of the wire and increasing the magnetic field strength with each measurement. B Making measurements of the force on several different straight segments of wire, increasing the length of the wire and decreasing the magnetic field strength with each measurement с Making measurements of the force on several different straight segments of wire, keeping the length of the wire constant while increasing the magnetic field strength with each measurement. D Making measurements of the force on several different straight segments of wire, increasing the length of the wire while keeping the magnetic-field strength the same with each measurement, then repeating the measurements while decreasing the length of the wire and increasing the magnetic field strength with each measurement E Making measurements of the force on several different straight segments of wire, increasing the length of the wire while keeping the magnetic-field strength constant with each measurement, then repeating the measurements while keeping the length of the wire constant while increasing the magnetic field strength with each measurement.
Answers
The experimental procedures that will allow the students to determine both of these relationships is option E:
Making measurements of the force on several different straight segments of wire, increasing the length of the wire while keeping the magnetic-field strength constant with each measurement, then repeating the measurements while keeping the length of the wire constant while increasing the magnetic field strength with each measurement.What happens to the magnetic field when the length of wire increases?The formula F = IL x B calculates the magnetic force acting through a magnetic field on a current-carrying wire. The magnetic field acts on a wire when a current is conducted through it in a direction that is perpendicular to both the magnetic force.
By increasing the amount of current flowing through the wire, the magnetic field's strength can be enhanced. As you get further from the wire, the strength gets weaker. If the amount of current flowing through it stays constant, its length and thickness have no bearing.
Therefore, the length of the wire in the magnetic field has an impact on the magnetic force's strength as well. The force acting on a wire increases with wire length in a magnetic field.
Learn more about experimental procedures from
https://brainly.com/question/17274244
#SPJ1
a hydraulic lift (jack) has two pistons, one large and one small. the pistons are at the same elevation. if it is equilibrium, which piston exerts the greatest force
Answers
The force exerted at the large piston will be double in magnitude in comparison with the force applied at the smaller piston.
We know, according to the pascal's law,
The pressure applied at any point in the incompressible fluid is equal in magnitude at each and every point.
So,
P = Force/Area
Where P is pressure,
If pressure is same, then we can write,
F₁/A₁ = F₂/A₂
Where,
F₁ is the force applied at the small piston,
A₁ is the area of the smaller piston,
F₂ is the force at the larger piston,
A₂ is the area of the larger piston,
It is also given that, area if the larger piston is two times the area of the smaller piston so,
A₂ = 2A₁
So, putting the values we get,
F₂/F₁ = 2
So, F₂ = 2F₁
It means that the force exerted by the larger piston will be double in magnitude.
To know more about Pascal's Law:
brainly.com/question/4262025
#SPJ4
based on the graphic, in what part of the electromagnetic spectrum does vegetation have the strongest response?
Answers
Between 400 nm and 700 nm of the electromagnetic spectrum, vegetation has the strongest response.
The electromagnetic spectrum travels in waves and spans an extensive spectrum from very long radio waves to very brief gamma rays. The human eye can simplest come across only a small portion of this spectrum called visible light.
In order from maximum to lowest power, the sections of the EM spectrum are named: gamma rays, X-rays, ultraviolet radiation, visible mild, infrared radiation, and radio waves.
In a tumbler, the purple mild travels the fastest, and the violet light travels the slowest of all seven hues. Velocity and wavelength are without delay proportional.
Learn more about Electromagnetic spectrum here:-https://brainly.com/question/23423065
#SPJ4
Two point-like particles, each of mass m, are originally separated by a distance d and moving in opposite directions each with a speed of v. What is the maximum value for v so that the particles will eventually move back together under the influence of the mutual gravitational attraction?
Answers
The angular momentum of a system does not depend on the point about which it is taken, according to equation (iv). the particles eventually move back together because of mutual gravitational attraction.
How to repair?As depicted in the following diagram, assume that two particles are present at positions P and Q at some point in time.
Think about a point R that is y miles away from a point Q, or QR=y PR=dy.
LP=mv0+mvd=mvd is the system's angular momentum around point P.
I The system's angular momentum around point Q is given by LQ=mvd+mv0=mvd.....(ii)
System's angular momentum about point R is given by LR=mv(d, y)+mv(y, d)=mvd....(iii)
The result of comparing equations I (ii), and (iii) is L P = LQ = LR....... (iv)
The angular momentum of a system does not depend on the point about which it is taken, according to equation (iv).
What causes the gravitational pull of objects?All objects with mass are attracted to one another by the gravitational attraction, which has a magnitude that is directly proportional to the masses of the two objects and inversely proportional to the square of their distance from one another.
What are the benefits of gravitational attraction?Our feet remain firmly planted on the ground thanks to gravity, which also keeps the Moon in orbit around the Earth, the Earth in orbit around the Sun, the Sun in orbit around the galactic core of our Milky Way galaxy, and the Milky Way and Andromeda galaxies orbiting each other.
Learn more about galaxy here:
https://brainly.com/question/2905713
#SPJ4
In an experiment, students hold a closed, rectangular loop of wire of mass mm, width LyLy, and length LxLx at rest above a very long wire that has a current II. The current-carrying wire is aligned along the origin, as shown in the diagram. The students release the loop from rest, and the loop falls in a direction perpendicular to the current-carrying wire. The students use an ammeter to measure the current in the loop as the loop passes very close to the wire but does not touch it. Which of the following statements best describes the experimental results and provides the principles that explain the results?
The induced current will be counterclockwise when the center of the loop is above the wire and clockwise when the center of the loop is below the wire. This is because the net magnetic field flux inside the loop is out of the page when the center of the loop is above the wire and is into the page when the center of the loop is below the wire.
Answer A: The induced current will be counterclockwise when the center of the loop is above the wire and clockwise when the center of the loop is below the wire. This is because the net magnetic field flux inside the loop is out of the page when the center of the loop is above the wire and is into the page when the center of the loop is below the wire.
A
The induced current will be clockwise until the top of the loop reaches the wire and will be counterclockwise when the top of the loop goes below this point. This is because the induced current is proportional to the rate of change of the magnetic field flux, which increases when the top of the loop is above the wire and decreases when the top of the loop is below the wire.
Answer B: The induced current will be clockwise until the top of the loop reaches the wire and will be counterclockwise when the top of the loop goes below this point. This is because the induced current is proportional to the rate of change of the magnetic field flux, which increases when the top of the loop is above the wire and decreases when the top of the loop is below the wire.
B
The induced current will always be clockwise as the loop falls. This is because the induced current is determined by the change of the magnetic flux inside the loop. The net magnetic flux is out of the page and increasing when the center of the loop is above the wire and into the page and decreasing when the center of the loop is below the wire.
Answer C: The induced current will always be clockwise as the loop falls. This is because the induced current is determined by the change of the magnetic flux inside the loop. The net magnetic flux is out of the page and increasing when the center of the loop is above the wire and into the page and decreasing when the center of the loop is below the wire.
C
The induced current will be clockwise until the bottom of the loop reaches the wire and will be counterclockwise when the bottom of the loop goes below this point. This is because the induced current is proportional to the rate of change of the magnetic field flux, which increases when the bottom of the loop is above the wire and decreases when the bottom of the loop is below the wire.
Answer D: The induced current will be clockwise until the bottom of the loop reaches the wire and will be counterclockwise when the bottom of the loop goes below this point. This is because the induced current is proportional to the rate of change of the magnetic field flux, which increases when the bottom of the loop is above the wire and decreases when the bottom of the loop is below the wire.
D
The induced current will always be counterclockwise as the loop falls. This is because the induced current is determined by the change of the magnetic flux inside the loop. The net magnetic flux is out of the page and decreasing when the center of the loop is above the wire and into the page and increasing when the center of the loop is below the wire.
Answers
The correct option is that C. The induced current will be clockwise until the bottom of the loop reaches the wire and will be counterclockwise when the bottom of the loop goes below this point. This is because the induced current is proportional to the rate of change of the magnetic field flux, which increases when the bottom of the loop is above the wire and decreases when the bottom of the loop is below the wire.
What is the current about?According to Faraday's law, the magnetic flux change rate in a circuit equals the magnitude of the induced EMF in the circuit. Additionally inversely correlated with the rate of change of magnetic flux in the circuit is hens induced current.
Lenz's law states that an induced current will flow in the opposite direction of the cause that is causing it. When the bottom of the loop is below this point, the induced current is counterclockwise until the bottom of the loop reaches the wire. This is because the magnetic field flux changes more quickly when the bottom of the loop is above the wire because the induced current is proportional to this
Learn more about current on:
https://brainly.com/question/24858512
#SPJ1
how to calculate the frequencies and wavelengths of standing waves on a string, in an open-open pipe, or a closed-open pipe.
Answers
If you are aware of the separation between nodes and antinodes, the string (or pipe) length, and the harmonic that is present.
What is harmonic?
A harmonic wave, such as a sinusoidal wave, has a frequency that is an integer multiple of the fundamental frequency, or the frequency of the initial periodic signal. The first harmonic of the original signal is also referred to as that; higher harmonics are the other harmonics.
Use this equation if you know the separation between nodes and antinodes:
2
λ \s \s =D
D stands for the separation between adjacent nodes or antinodes.
Also
The formula v = f gives the wavelength. Since the frequency is fixed, the only way to alter the wavelength of the waves is to alter their speed.
To learn more about harmonic visit
https://brainly.com/question/9253932
#SPJ4
a hollow metal sphere has inner radius a and outer radius b. the hollow sphere has charge 2 q. a point charge q sits at the center of the hollow sphere. you may want to review (page 658) . for help with math skills, you may want to review
Answers
The inner radius of a hollow metal sphere is a, and the outside radius is b. The hollow sphere has a point charge q in the center. There will be a distribution of q charges on the inner surface.
What is a charge of electricity?Electric charge can be interpreted as an excess or shortage of electrons and is the amount of imbalanced electricity (either positive or negative) in a body. There are two varieties: positive (+) and negative (–).
How is electricity produced?We all studied the structure of an atom with an equal amount of protons, neutrons, and electrons in physics and chemistry. Protons are positively charged, neutrons are neutrally charged, and electrons have a negative charge.
To learn more about electric charge visit:
brainly.com/question/9194793
#SPJ4
The given question is incomplete. The complete question is:
A hollow metal sphere has inner radius 'a' and outer radius 'b'. The hollow sphere has charge +2Q. A point charge +Q sits at the center of the hollow sphere. How much charge is on the inside surface of the hollow sphere?
(a) Seismographs measure the arrival times of earthquakes with a precision of 0.100 s. To get the distance to the epicenter of the quake, they compare the arrival times of S- and P-waves, which travel at different speeds. Figure 16.48) If S- and P-waves travel at 4.00 and 7.20 km/s, respectively, in the region considered, how precisely can the distance to the source of the earthquake be determined?(b) Seismic waves from underground detonations of nuclear bombs can be used to locate the test site and detect violations of test bans. Discuss whether your answer to (a) implies a serious limit to such detection. (Note also that the uncertainty is greater if there is an uncertainty in the propagation speeds of the S- and P-waves.)
Answers
A. 0.900 km
B. This uncertainty is small enough that it's possible to be certain which country conducted a nuclear test. Uncertainty in wave propagation speed will create additional uncertainty.
The study of earthquakes and seismic waves that travel through and around the Earth is known as seismology. A scientist who investigates earthquakes and seismic waves is known as a seismologist.
Seismic waves are caused by the sudden movement of materials within the Earth, such as slip along a fault during an earthquake. Volcanic eruptions, explosions, landslides, avalanches, and even rushing rivers can also cause seismic waves. Seismic waves travel through and around the Earth and can be recorded with seismometers.
There are several different kinds of seismic waves, and they all move in different ways. The two main types of waves are body waves and surface waves. Body waves can travel through the Earth's inner layers, but surface waves can only move along the surface of the planet like ripples on water. Earthquakes send out seismic energy as both body and surface waves.
learn more about seismic waves here:
https://brainly.com/question/26404022
#SPJ4
(a) The distance to the source of the earthquake = 0.4 km.
(b) 0.72 km
Seismographs:
An instrument used to record earthquake waves.
Given that,
Seismographs measure the arrival times of earthquakes with a precision of 0.100 s.
Then the distance moved by the S waves in the given time interval is
[tex]d_{s} =(velocity)_{s} t[/tex]
[tex]d_{s}= (4km/s)(0.1s)[/tex]
[tex]d_{s}=0.4km[/tex]
Then the distance moved by the P waves in the given time interval is
[tex]d_{p} =(velocity)_{p} t[/tex]
[tex]d_{p}=(7.2km/s)(0.1s)[/tex]
[tex]d_{p}=0.72km[/tex]
So the distance to the source of an earthquake is
[tex]d=d_{s}-d_{p}[/tex]
[tex]d=(0.72km)-(0.4km)[/tex]
[tex]d=0.32km[/tex]
Hence,
(a) The distance to the source of the earthquake = 0.4 km.
(b) 0.72 km
Learn more about Seismographs here
https://brainly.com/question/14704742
#SPJ4
TRUE OR FALSE in physics, every physical quantity is measured with respect to a unit. time is measured in seconds, length is measured in meters, and mass is measured in kilograms. knowing the units of physical quantities will help you solve problems in physics.
Answers
The unit of G is found out to be m³/kg * s².
The force of gravitational attraction is represented by the equation.
F = (G m₁ m₂)/r²
where,
F is the magnitude of the gravitational attraction on either body
m₁ and m₂ are the masses of the bodies,
r is the distance between them
G is the gravitational constant
We need to find the unit of G,
G = (F * r²)/(m₁ m₂)
Let us place the units for the above formula,
G = (N * m²)/kg²
N = kg m/s²
G = (kg * m * m²)/ kg² * s²
G = m³/kg * s²
Thus, the correct option is m³/kg * s².
The question is incomplete. The complete question is 'Gravity causes objects to be attracted to one another. This attraction keeps our feet firmly planted on the ground and causes the moon to orbit the earth. The force of gravitational attraction is represented by the equation.
F= Gm1 m2 /r^2
where F is the magnitude of the gravitational attraction on either body, m1 and m2 are the masses of the bodies, r is the distance between them, and G is the gravitational constant. In Sl units, the units of force are kg m/s^2, the units of mass are kg, and the units of distance are m. For this equation to have consistent units, the units of G must be which of the following?
a. kg^3/ms^2
b. kgs^2/m^3
c. m^3/kgs^2
d. m/kgs^2
To know more about units:
https://brainly.com/question/20984485
#SPJ4
Question 9 of 25
Describe the path of the light ray that hits a mirror after passing through its
focus.
OA. It reflects back through the focus.
B. It hits the mirror and reflects back exactly the way it came in.
C. It is refracted through the mirror.
D. It is reflected back parallel to the principal axis.
SUBMIT
Answers
The path taken by a light beam after passing through a mirror's focus is where it hits the mirror and reflects back in exactly the same direction as it went in.
What, when striking the surface, causes the light to reflect back?Specular reflection is the name for this. A smooth surface allows light to bounce back at the same angle that it was incident. Rays of light that are reflected off of a smooth surface go in that same direction.
Where does a light beam travel?The narrow beams of light that travel in straight lines along their courses as electromagnetic waves are known as rays. Though its path might be altered by reflection or refraction, light always moves in a straight line.
To know more about path of the light ray visit :-
https://brainly.com/question/3703500
#SPJ1
location of inhibitors bound to group iva phospholipase a2 determined by molecular dynamics and deuterium exchange mass spectrometry. t/f
Answers
Location of inhibitors bound to group iva phospholipase a2 determined by molecular dynamics and deuterium exchange mass spectrometry. (True)
Combining deuterium exchange mass spectrometry (DXMS) and molecular dynamics, we investigated the binding of group IVA (GIVA) phospholipase A2 (PLA2) inhibitors (MD). On the basis of deuterium exchange results, models of the GIVA PLA2 inhibitors pyrrophenone and the 2-oxoamide AX007 docked into the protein were created, and comprehensive molecular dynamics simulations were performed to determine protein–inhibitor interactions. The models demonstrate that both inhibitors interact with crucial residues that modify the deuterium exchange pattern in response to inhibitor binding. Pyrrophenone is primarily associated with the protein through contacts close to the active site, whereas oxoamide is primarily attached through contacts remote from the active site. We also compare the dynamics of the two inhibitor-bound complexes around the active site. It is possible to create better inhibitors against GIVA PLA2 by combining computational and experimental approaches to define more precise inhibitor binding locations.
Mass Spectrometry:
In order to determine the mass-to-charge ratio (m/z) of one or more molecules found in a sample, mass spectrometry is a valuable analytical instrument. The precise molecular weight of the sample's constituent parts can frequently be determined using these measures as well. Mass spectrometers are typically used to quantify known substances, identify novel compounds by molecular weight determination, and assess the structure and chemical characteristics of molecules.
∴ Location of inhibitors bound to group iva phospholipase a2 determined by molecular dynamics and deuterium exchange mass spectrometry. (True)
Learn more about Mass Spectrometry here
https://brainly.com/question/14569480
#SPJ4
What does the law of conservation of energy state?
energy cannot be destroyed but it can change forms
energy always gets used up in every chemical reaction
energy can be destroyed but not created
energy is always the same and it cannot be changed
Answers
I think it is "energy cannot be destroyed but it can change forms".
Joan is initially driving her car at 10 m/s when she decides to go faster. She accelerates uniformly at 4 m/s2 for 100 meters. How fast is Joan going?
a
50 m/s
b
35 m/s
c
30 m/s
d
26 m/s
Answers
Joan is going with speed 30 m/s. Hence, option (C) is correct.
What is acceleration?Acceleration is the rate at which a velocity changes over time. It qualifies as a vector quantity because it possesses both direction and magnitude. Meter/second^2 (m/s^2) is the SI unit of acceleration.
Given that: initial speed of the car: u = 10 m/s.
Uniform acceleration of the car: a = 4 m/s^2.
Distance travelled: s = 100 meters.
Let, the final speed is = v
Using the formula v² = u² + 2as, we get:
v = √(10² + 2×4×100) m/s.
= 30 m/s.
Hence, final speed of the car is 30 m/s.
Learn more about acceleration here:
brainly.com/question/12550364
#SPJ1
Two long parallel wires are placed side by side on a horizontal table. The wires carry equal currents in the same direction. Which of the following statements are true? Check all that apply. The magnetic field is a maximum at a point midway between the two wires The magnetic force between the two wires is attractive. The magnetic force between the two wires is repulsive. The magnetic field at a point midway between the two wires is zero.
Answers
When two long parallel wires are placed side by side on a horizontal table and the wires carry equal currents in the same direction, the magnetic field at a point midway between the two wires is zero.
When two parallel wires carry current in the same direction, they exert equal and opposite attractive forces on each other. Thus, the net magnetic field at midpoint is zero. While, Two parallel wires carrying current in opposite directions repel and try to move away from each other.
Similarly, if you have two parallel wires with current traveling in opposite directions, as you do in the series circuit, then the magnetic fields of the two wires will be traveling in the same direction at the point at which they intersect, and therefore repel each other.
To know more about Magnetic Field:
https://brainly.com/question/13103888
#SPJ4
the use of the doppler effect in the study of astronomy
Answers
twelve cars were inspected after final assembly. the number of defects ranged between 87 and 139 defects per car with an average of 116. assuming that the assembly process was in statistical control, determine the center line and upper and lower control limits for the c chart that might be used in this situation
Answers
Twelve cars were inspected after final assembly. the number of defects ranged between 87 and 139 defects per car with an average of 116. The upper control limit and lower control limit
given that :
the number of defects ranged between = 87 and 139
defects per car with an average = 116
the upper control limit is given below :
UCL = c + 3√c
UCL = 116 + 3√116
UCL = 116 + 32.31
UCL = 148
Thus, the upper control limit is 148
The lower control limit is given below :
LCL = c - 3√c
LCL = 116 - 3√116
LCL = 84
Thus the lower control limit is 84.
To learn more about control limit here
https://brainly.com/question/13861213
#SPJ4
NAME THAT DISORDER
For the following scenarios, identify the psychological disorder indicated (if there is definitely a disorder). Indicate the reason why you chose that diagnosis (i.e., what are the symptoms/behaviors presented). According to your textbook (or any other source you would like to use), what might be an appropriate course of treatment (use all that could apply) for the diagnosis you chose. Try to be as specific as possible.
Homework assignment is due prior to the start of class on WEDNESDAY, DECEMBER 14TH.
1. When Lila saw the policeman turn on his flashing blue lights and motion her to pull over, her heart rate increased, her mouth felt dry, and she quite nervous about what was going to happen.
2. Although doctors could find no evidence of brain damage, Ralph could not remember driving the car that was involved in the accident that resulted in the deaths of his wife and son.
3. When Sammi saw Andrea three months ago, Andrea was too busy to talk. She was involved in all kinds of plans for a vague new business that she was sure to make her a fortune. But just last week, Sammi heard that Andrea was feeling very low, was sleeping most of the time, and had given up all plans to do just about anything.
4. Timothy was having an increasingly difficult time completing his reading assignments. He was becoming unsure if what he was reading was really there or if his mind was making things up. This was not helped by the “kryptonite rays” being emitted by the smoke detector and the hidden camera spying on him from behind the mirror in his room.
5. Ever since her home was burglarized, Maria double checks to make sure the doors are locked before going to bed.
6. Randall is so afraid of bacteria that each day he must wash each dish and utensil three times in scalding, soapy water and then rinse each dish exactly twenty seconds. If he deviates from this ritual in the slightest way, he must wash all the dishes and utensils again.
7. Everything was hopeless. Francine felt that because she was such a horrible wife and mother she felt she didn’t deserve to live and that her husband should find a better person to be with. She cried all the time and couldn’t escape her sadness.
8. When the helicopter crash landed, Yusef was horrified. He and he pilot were injured and the gas tank could blow at any time. Although he had a broken arm, Yusef was able to pull both himself and the unconscious pilot out of the plane and to safety before it blew. But ever since that time, the unbroken arm he used to save himself and the pilot has been ‘paralyzed’ and Yusef does not appear to be too upset about it.
9. Carlos, who is turning 40, is very worried about having about having a heart attack since his brother, father, and grandfather died of heart attacks in their 40s.
10. On the way home, Celia found herself having difficulty breathing, and her heart was pounding so hard that she could barely see clearly. She pulled off the road where she continued to hyperventilate, feel dizzy, and have sweaty palms. After about 10 minutes or so, her breathing returned to normal and she continued on her drive home.
Answers
Where the exercise here is to name the disorder, note that:
It should be mentioned that medication (such as antidepressants or benzodiazepines) and/or counseling may be used to treat a panic disorder such as cognitive-behavioral therapy.
A suitable course of treatment for dissociative disorders may involve counseling (such as cognitive-behavioral therapy, trauma-focused therapy, or psychodynamic therapy) and/or medication.
The focus of psychodynamic therapy is on unconscious processes as they show in the client's current behavior. Client self-awareness and knowledge of the effect of the past on present behavior are the aims of psychodynamic therapy.
Learn more about Dissociative disorder:
https://brainly.com/question/20430933
#SPJ1
A fisherman has caught a fish on his pole, and to keep the pole steady he has to apply an upward force of F2 = 235 N at an angle of 60.5° with respect to the pole (see figure). The length of his pole is 3.5 m, and he is holding it a distance 0.45 m from the end, where he is applying a downward force F1.
Randomized VariablesF2 = 235 N
θ = 60.5°
L = 3.5 m
d = 0.45 m
Answers
A fisherman has caught a fish on his pole, and to keep the pole steady he has to apply an upward force is [tex]=\quad m=(205-182.391[/tex]
What is force?
A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.
[tex]\begin{aligned}& F_2=235 \mathrm{~N} \\& \theta=60.5^{\circ} \\& L=3.5\mathrm{~m} \\& d=0.45\mathrm{~m}\end{aligned}[/tex]
calculating torame about 'A'
For equilibrium[tex]$\sum \tau_A=0$[/tex]
$$[tex]$$\begin{aligned}& \Rightarrow \quad \vec{F} \times \vec{L}+\vec{F}_2 \times(\overrightarrow{L-d)}=0 \\& \Rightarrow \quad \vec{F}_1 \times \overrightarrow{L_1}=-\vec{F}_2(\overrightarrow{L-d}) \\& \Rightarrow \quad F_1 \cdot L \sin \theta=F_2 \cdot(L-\alpha) \sin \theta \\& \Rightarrow \quad F_1=F_2 \frac{(L-a)}{L} \\& \Rightarrow \quad F_1=235 \cdot \frac{(3.5-0.35)}{3.2} \\& F_1=182.58 \mathrm{~N} \\&\end{aligned}$$[/tex]
[tex]For equilibrium $\quad \Sigma$ fret $=0$$$\begin{aligned}& \Rightarrow \quad \overrightarrow{F_2}+\overrightarrow{F_1}+\overrightarrow{m_g}=\overrightarrow{0} \\& \Rightarrow \quad m g .=F_2-F_1 \\& \Rightarrow \quad m=\left|\frac{F_2-F_1}{g}\right| \\& \Rightarrow m=\frac{(205-182.591}{9.8} \\& m=2.288 \mathrm{~kg} \\&\end{aligned}$$[/tex]
To learn more about force visit
https://brainly.com/question/26115859
#SPJ4
according to the maxwellian speed distribution, as the temperature increases the number of molecules with speeds within a small interval: increases decreases increases at high temperatures and
Answers
According to the Maxwellian speed distribution, as the temperature increases, the number of molecules with speeds within a small interval decreases.
Temperature is a bodily quantity that expresses the perceptions of hotness and coldness. Temperature is measured by using a thermometer. Thermometers are calibrated in diverse temperature scales that have been trusted by various reference points and thermometric materials for definition.
Temperature plays a vital role in hospital treatment, food, drinks, and agriculture. Our health is often reliant upon the temperature in many methods as properly. Preserving the right temperature degrees in cold garage areas is crucial.
The SI unit of temperature as in line with the international machine of units is Kelvin that's represented by the symbol K.
Learn more about Temperature here:-https://brainly.com/question/28752847
#SPJ4
current is moving through a copper ribbon in the direction shown. the ribbon is suspended between the poles of a magnet as indicated. when the voltage is measured between a and b, it is observed that a is at higher potential than b. which of the following explains this observation?
Answers
The option that explains this observation is option E:
The electric field in the ribbon is distorted by the magnetic field. This distortion creates an electric field component directed from point A to point B that deflects electrons in the ribbon toward point B.Which way will the electron be deflected by the electric field?The physical field that surrounds electrically charged particles and exerts force on all other charged particles in the field, either attracting or repelling them, is known as an electric field (or E-field). It can also refer to a system of charged particles' physical field.
Negatively charged electrons will be diverted in the direction of the positive electrode, or (+) plate. Positively charged protons will be diverted in the direction of the negative electrode, or (-) plate.
Therefore, Magnetic lines of force in space are bent by ferromagnetic materials in a static magnetic field. The distortion impact on the static magnetic field is disturbed by the material flaws.
Learn more about electric field from
https://brainly.com/question/14372859
#SPJ1
See full question below
Current Current is moving through a copper ribbon in the direction shown. The ribbon is suspended between the poles of a magnet as indicated. When the voltage is measured between A and B, it is observed that A is at higher potential than B. Which of the following explains this observation?
A The electrons in the ribbon behave like magnetic dipoles; thus, they align with the magnetic field of the magnet that deflects electrons in the ribbon toward point A.
B The electrons in the ribbon behave like magnetic dipoles; thus, they align with the magnetic field of the magnet that deflects electrons in the ribbon toward point B.
с Electrons moving through the magnetic field experience a magnetic force to the left that deflects electrons in the ribbon toward point A.
D Electrons moving through the magnetic field experience a magnetic force to the right that deflects electrons in the ribbon toward point B.
E The electric field in the ribbon is distorted by the magnetic field. This distortion creates an electric field component directed from point A to point B that deflects electrons in the ribbon toward point B.
two small spheres carry electric charges of equal magnitudes. there are equally spaced points (a , b , and c) which lie along the same line.
Answers
The right response is option number B. Electric field can be represented by a vector arrow because of vector quantity. To calculate the size of the electric field, we can apply the equation E=k |Q| r2E=k|Q| r2.
How can you determine an electric field's direction at a specific location?The electrical force acting on a positive test charge at a location in space has the same direction as the electrical field there.
What three types of electric fields are there?Electric field components can be found in electromagnetic waves , X-rays, radio waves, and microwaves. Within a conductor that is carrying current, there is an external electric field. Charges create electrical fields.
Learn more about uv light here:
https://brainly.com/question/23342892
#SPJ4
Arteriosclerotic plaques forming on the inner walls of arteries can decrease the effective cross-sectional area of an artery. Even small changes in the effective area of an artery can lead to very large changes in the blood pressure in the artery and possibly to the collapse of the blood vessel.
Imagine a healthy artery, with blood flow velocity of v0=0.14m/s and mass per unit volume of rho=1050kg/m3. The kinetic energy per unit volume of blood is given by
K0=12rhov20.
Imagine that plaque has narrowed an artery to one-fifth of its normal cross-sectional area (an 80% blockage).
A) Compared to normal blood flow velocity, v0, what is the velocity of blood as it passes through this blockage? (Show your work)
B) By what factor does the kinetic energy per unit of blood volume change as the blood passes through this blockage?
C) As the blood passes through this blockage, what happens to the blood pressure?
1. It increases by about 41 Pa
2. It increases by about 250 Pa
3. It stays the same
4. It decreases by about 41 Pa
5. It decreases by about 250 Pa
D) Relative to its initial, healthy state, by what factor does the velocity of blood increase as the blood passes through this blockage?
E) By what factor does the kinetic energy per unit of blood volume increase as the blood passes through this blockage?
F) What is the magnitude of the drop in blood pressure, Δp, as the blood passes through this blockage? Use K0 as the normal (i.e., unblocked) kinetic energy per unit volume of the blood. (Show your work)
Answers
The kinetic energy per unit volume of blood 10.9 [tex]\frac{j}{m^{3}}[/tex].
The formula for the kinetic energy per unit volume (K) is given as follows:
[tex]K=\frac{1}{2}[/tex]ρ[tex]v^{2}[/tex] ...(A)
The kinetic energy (KE) is [tex]\frac{1}{2}mv^{2}[/tex].
In this case, we need to find the kinetic energy per unit volume(V)
K=[tex]\frac{KE}{V}=\frac{\frac{1}{2}mv^{2}}{V}[/tex]
Since,
Density =ρ=[tex]\frac{m}{V}[/tex]
Therefore, the above formula will become: [tex]K=\frac{1}{2}[/tex]ρ[tex]v^{2}[/tex]
Where,
K= Kinetic energy unit volume
ρ = Density = Mass per unit volume= 1050 [tex]\frac{kg}{m^{3} }[/tex]
v= velocity = 0.14[tex]\frac{m}{s}[/tex]
Plug the values in the equation (A):
[tex]K=\frac{1}{2}(1050)(0.14)^{2}[/tex]
[tex]= 10.29 \frac{j}{m}^{3}[/tex]
Newton's second law of motion states that the resultant force applied to an object is directly proportional to the mass and acceleration of the object.
F= ma
F= force
m= Objects Mass
a = Acceleration
v= 0.14 m/s
ρ=1050 kg/[tex]m^{3}[/tex]
[tex]Ek=\frac{1}{2}mv^{2}[/tex]
[tex]\frac{Ek}{V} =\frac{1}{2}\frac{mv^{2}}{V}[/tex]
[tex]\frac{Ek}{V} =\frac{1}{2}\frac{m}{V} v^{2}[/tex]
[tex]\frac{Ek}{V} =\frac{1}{2}[/tex]ρ[tex]v^{2}[/tex]
[tex]\frac{Ek}{V} =\frac{1}{2}[/tex]×1050×[tex]0.14^{2}[/tex]
=10.29 joule/[tex]m^{3}[/tex]
For such more questions about kinetic energy
https://brainly.com/question/13761200
#SPJ4
(1) A table tennis ball is dropped
onto the floor from a height of
4m and it rebounds to a height of
3m. If the time of contact with the floor is 0.01s, what is the magnitude and direction of the acceleration during the contact.
Answers
Answer:
Here, h1=4.00m,h92)=3.00m,Delta t =0.01 s.Letv1 be the velocity of the ball (actind downwards) just before striking the floor an dv20 be the velocity of the ball (acting upwaeds) ust after striking the floor. Then, change in velocity of the ball in time Δtv2−(−v1)v2+v1
:. acceleration, a=v2+v1Δt ..(i)
When body falls from height h1,
then u=o,v1,a=gandS=h1
As, v21=u2+2aS,
:. v_(1) ^(2) =0 + g h_(10 or v12–√gh1
Taking motion of the ball after striking the floor, then u=v2,v=0,a=−g,S=h2
As, v2=u22as,∴v21=0+2gh1orv_(1) =sqrt 32 g h_(1)Tak∈gmotionoftheballa>erstrik∈gthe⌊,⌋thenu=v_(2), v=0, a=- g, S=h_(2)As,v2=u2+2aS,wehave0 = v_(2)^(2) +2 (-g) h_92) otr v2=2–√gh2
Putting values in (i) we get,
a=2–√gh2+2–√gh1Δt)
a=2–√×9.8×3+2–√×9.8×40.01
= 1652m/s2.
Explanation:
a particle moves under the influence of a conservative force. the equation for the potential energy as a function of position is given by: u(x)
Answers
A particle moves under the influence of a conservative force, The maximum x-coordinate of the particle at x = -3 m is 7 m.
Given that,
Potential energy of the particle u(x) = 5x² - 20x + 2
We know the relation between force and potential energy as,
F = -du/dx = -d/dx (5x² - 20x + 2) = -(10 x - 20 ) = 20 - 10 x at mean position x = 2.
At x = -3, amplitude is given by x = 2 - (-3) = 5
The maximum x co-ordinate is given as x = 5 + 2 = 7 m
To know more about potential energy function:
https://brainly.com/question/29998972
#SPJ4
