Answer:
Explanation:
· 44 g NaCl Explanation: The problem provides you with the molarity and volume of the target
The answer is rounded to two sig figs, the number of sig figs you have for the molarity of the solution.
The mass of a solute needed to prepare a solution with given volume is find by molarity. The mass of NaCl need to make a 138.1 mL solution of 0.190 M is 1.53 grams.
What is molarity ?Molarity of a solution is a term to express its concentration. Mathematically, it is the ratio of no.of moles of solute to the volume of solution in litres.
Given that, the volume of solution is 138.1 mL. One litre solution is 1000 mL. Hence, 138.1 mL is 0.1381 L. The molarity of the solution is 0.190 M. From these data we can calculate the no.of moles of NaCl as below:
no.of moles = molarity × volume of solution in L
= 0.190 M × 0.1381 L
= 0.0262 moles.
This is the no.of moles required to make the solution.
Molecular mass of NaCl = 58.4 g/mol.
Thus mass of 0.0262 moles of NaCl = 0.0262 mol × 58.4 g/mol
= 1.53 g.
Therefore, the mass of NaCl required is 1.53 g.
To learn more about molarity, refer the link below:
https://brainly.com/question/16727614
#SPJ2
jawbone root nerve cementum blood vessel gum crown Fill in the blanks. 1. The front four teeth on each jaw are called 2. Each tooth is attached to the jawbone with the help of 3. A healthy tooth is held firmly in the jawbone by the 4. Teeth can get spoilt if they are not kept 5. Germs in the mouth feed on sugar and make
Answer:
shduxhheufufffhduduf
PLEASE HELP!!!
Explain the various factors that impact the solubility of substances in water.
(At least 4 sentences) :)
The various factors that impact the solubility of substances in water are - nature of solute and solvent, temperature, pressure and pH.
The solubility of substances in water is influenced by several factors:
Nature of the solute and solvent: The chemical properties of both the solute and the solvent play a significant role. Substances with similar polarities and intermolecular forces tend to dissolve more readily in water. Polar solutes, such as salts and sugars, dissolve well in polar solvents like water, whereas nonpolar solutes, like oils and fats, have low solubility in water.Temperature: In general, an increase in temperature enhances the solubility of solid solutes in water, as it provides more energy for the solute particles to overcome intermolecular forces and mix with the solvent. However, the effect of temperature on solubility can vary depending on the specific solute. For some solutes, such as gases, solubility decreases with increasing temperature.Pressure (for gases): The solubility of gases in water is influenced by pressure. According to Henry's law, the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas above the liquid. Therefore, an increase in pressure generally leads to an increase in gas solubility in water.pH: The pH of the solution can impact the solubility of certain substances. For example, the solubility of acidic or basic compounds may change with varying pH levels.Learn more about Solubility, here:
https://brainly.com/question/31493083
#SPJ2
According to the following pKa values listed for a set of acids, which would lead to the strongest conjugate base?
a. -2.
b. 1.
c. 7.
d. 25.
e. 50.
discuss the benefits of observing good safety measures in relation to increase in productivity within a pharmaceutical laboratory?
Answer:
Pharmaceutical laboratory helps in devloping and conducting research, vaccines. Various kinds of drugs and chemical substances used and are produced at a Pharmaceutical laboratory.
The pharmaceutical laboratories performs with various hazardous substances that results in exposure to various chemicals, biological substances and radiation. To avoid any injury or infection labs need to maintain all safety measures.
Spillage and relaseing chemical substances can be lethal during transportaions by safety measures for heling in for manufacturing of such therapeutic agents spillage and avoid wastage.
Maintaining good safety standards in the pharmaceuticals laboratory will help promote the health of technicians and workers which in turn will increase productivity and attain positive outcomes.
An acetic acid buffer containing 0.50 M acetic acid (CH3COOH) and 0.50 M sodium acetate (CH3COONa) has a pH of 4.74. What will the pH be after 0.0020 mol of HCl has been added to 100.0 mL of the buffer
Answer:
pH = 4.71
Explanation:
We can find the pH of a buffer (Mixture of weak acid: CH3COOH, and its conjugate base: CH3COONa) using H-H equation:
pH = pKa + log [CH3COONa] / [CH3COOH]
Where pH is the pH of the buffere = 4.74, pKa the pka of the buffer and [] could be taken as the moles of each reactant.
As initially [CH3COONa] = [CH3COOH], [CH3COONa] / [CH3COOH] = 1:
pH = pKa + log 1
4.74 = pKa
To solve this question we need to find the initial moles of each species, The CH3COONa reacts with HCl to produce CH3COOH. That means the moles of CH3COOH after the reaction are: Initial CH3COOH + Moles HCl
Moles CH3COONa: Initial CH3COONa - Moles HCl.
Moles CH3COOH:
0.100L * (0.50mol / L) = 0.050 moles CH3COOH + 0.0020 moles HCl =
0.052 moles CH3COOH
Moles CH3COONa:
0.100L * (0.50mol / L) = 0.050 moles CH3COONa - 0.0020 moles HCl =
0.048 moles CH3COONa
Using H-H equation:
pH = 4.74 + log [0.048 moles] / [0.052 moles]
pH = 4.71The pH be after 0.0020 mol of HCl has been added to 100.0 mL of the buffer is 4.71.
What is buffer solution?Buffer solution is a mixture of weak acid and its conjugate base or vice versa.
We can calculate the pH of buffer solution by using Henderson - Hasselbalch Equation:
pH = pKa + log[CH₃COONa] / [CH₃COOH]
Initially concentration of CH₃COONa is equal to the concentration of CH₃COOH and equal becomes:
4.74 = pKa + log(1)
pKa = 4.74
Given moles of added HCl moles = 0.002 mole
Given molarity of each CH₃COOH & CH₃COONa = 0.50M
Given Volume = 100mL
We can calculate the moles by using the formula:
n = M × V
Moles of CH₃COOH & CH₃COONa = 0.100 × 0.50 = 0.050 moles
Moles of CH₃COOH = 0.050moles CH₃COOH + 0.0020moles HCl =
0.052moles CH₃COOH
Moles of CH₃COONa = 0.050moles CH3COONa - 0.0020moles HCl =
0.048moles CH₃COONa
Now, resultant pH will be:
pH = 4.74 + log [0.048 moles] / [0.052 moles]
pH = 4.71
Hence, pH of resultant solution is 4.71.
To know more about Henderson - Hasselbalch Equation, visit the below link:
https://brainly.com/question/26746644
Determine the molarity of the sodium ions when 78.0 g Na2S is dissolved in water for a final volume of 1.0 L.
Answer:
[Na⁺] = 1.99 M
Explanation:
Na₂S is a ionic salt that can be dissociated.
Dissociation equation is:
Na₂S → 2Na⁺ + S⁻²
1 mol of sodium sulfide can give 2 moles of sodium cation.
We convert moles of salt: 78 g . 1mol / 78.06 g = 0.999 moles
As ratio is 1:2, after dissociation we have (0.999 . 2) = 1.998 moles of Na⁺
Molarity is a type of concentration.
It indicates moles of solute in 1 L of solution and in this case, we have 1 L as final voulme.
Moles of Na⁺ are 1.998 moles. Then molarity (mol/L) is:
M =1.99 mol/L
A calorimeter measures the ______ involved in reactions or other processes by measuring the ______ of the materials _____ in the process. The calorimeter is _______ to prevent transfer of heat to outside the device.
Answer:
heat; temperature; surrounding; insulated.
Explanation:
A calorimeter can be defined as a scientific instrument or device designed and developed for measuring the heat involved in reactions or other processes, especially by taking the measurement of the temperature of the materials surrounding the process.
Basically, a calorimeter is insulated using materials with very high level of resistivity so as to prevent heat transfer to the outside of the device (calorimeter). Some of the components that make up a simple calorimeter are thermometer, an interior styrofoam cup, an exterior styrofoam cup, cover, etc.
Additionally, a calorie refers to the amount of heat required to raise the temperature of a gram of water by one degree Celsius (°C).
All --- is a good conductor of heat
54
Penny bought a club moss plant for her water garden. She needs to know how tall the plant will grow so she know
how much space it will need.
How tall will the plant likely grow?
O less than 5 centimeters because it is a seedless vascular plant
less than 5 centimeters because it is a nonvascular plant
O more than 5 centimeters because it is a seedless vascular plant
O more than 5 centimeters because it is a nonvascular plant
Answer:
less than 5 centimeters because it is a nonvascular plant
Explanation:
Mosses are a group of plants under the division Bryophyta. They are said to be the most primitive plant life in existence as they lack true roots, stems and leaves. They also lack vascular system, hence, they are regarded as non-vascular plants. They usually grow in very small sizes (about 0.2 - 10cm).
According to this question, Penny bought a club moss plant for her water garden and needs to know how tall the plant will grow so she know how much space it will need. Since it is a miss plant that lacks vascular tissues i.e. nonvascular, it will likely grow less than 5 centimeters in height.
Answer:
d
Explanation:
What is the mass number of an ion with 106 electrons, 157 neutrons, and a +1 charge?
Answer:
264 g/mol
Explanation:
#electrons equal #protons = 106
Plus 1 charge => m protons = 106 + 1 = 107
Mass number: 107 + 157 = 264 g/mol
What would be the specific mathematical effect on the reaction rate if you carried out the sodium iodide-in-acetone reactions on the alkyl halides using an iodide solution half as concentrated? ("Slower" or "faster" is not specific enough.)
Answer:
Slower
Explanation:
The reaction between alkyl halides and sodium iodide-in-acetone is an SN2 reaction. The rate of reaction depends on the concentration of the alkyl halide as well as the concentration of the sodium iodide. It is a bimolecular reaction.
This means that if the concentration of any of the reactants is halved, the rate of reaction decreases accordingly.
Therefore, if the iodide solution is half as concentrated, the reaction is observed to be slower in accordance with the rate law;
Rate = k[alkyl halide] [iodide]
Glass tubes of the following diameters are arranged in a water trough. Rank the following glass tubes in decreasing order of their capillary rise.
Rank from highest to lowest capillary rise. To rank items as equivalent, overlap them.
1.25 mm, 1 mm, 0.75 mm, 0.25 mm, 0.50 mm
Answer:
0.25 mm> 0.50 mm > 0.75 mm> 1mm> 1.25 mm
Explanation:
Capillary movement involves the movement of liquid up through a capillary tube.
Looking at the question, we can see all the various diameters of the capillary tube are involved.
Note that, that the narrower the diameter of the capillary tube, the better the capillary action of the liquid (the liquid rises more now than then).
Identify the statements that correctly describe the saturation temperature of a solution.
A. Any temperature at which the solution is liquid.
B. Any temperature at which all of the compound is solid.
C. The temperature at which solid begins to appear from a cooled solution.
D. The temperature at which the Ksp value can be calculated.
Select the missing words to complete the definition of buffer capacity. Buffer capacity is the _____________ of acid or base a buffer can handle before pushing the _____________ outside of the buffer range.
Answer:
amount, pH value.
Explanation:
The buffer range is the pH range in which the buffer performs optimally, i.e., neutralizes even when a strong acid or base is introduced to it and resists any major change in its pH value.
The buffer capacity is the amount of acid or base that can be added before the pH of the buffer solution changes significantly.
Thus, the final statement becomes,
Buffer capacity is the amount of acid or base a buffer can handle before pushing the pH value outside of the buffer range.
Answer:
Amount
pH value
Buffer capacity is the amount of acid or base a buffer can handle before pushing the pH outside of the buffer range.
A buffer however consists of a weak acid and its conjugate base.Its major advantage is the ability to resist changes in pH when an acid or a base is added to the solution.
The human blood is also an example of a buffer solution as it is able to resist changes in pH when we eat or drink certain types of food.
An example of a buffer include acetic acid (HC₂H₃O₂) which is a weak acid and sodium acetate (NaC₂H₃O₂) which is a salt derived from that acid).
Read more on https://brainly.com/question/24188850
Where do reactions in a solid
generally take place?
A. All throughout the solid
B. At the center of the solid.
C. Only on opposite sides of the solid
due to repelling forces.
D. On the surface of the solid.
Answer:
A
Explanation:
because solid stick together like magnetic and can feel every vibration
Answer:D
Explanation: on the surface of a solid
On the basis of your knowledge of the reaction of halogens with alkanes, decide which product you would not expect to be formed in even small quantities in the bromination of ethane?
A) BrCH2CH2Br
B) CH3CH2CH2Br
C) CH3CHBr2
D) CH3CH2CH2CH3
E) BrCH2CH2CH2CH2Br
Answer:
On the basis of your knowledge of the reaction of halogens with alkanes, decide which product you would not expect to be formed in even small quantities in the bromination of ethane?
A) BrCH2CH2Br
B) CH3CH2CH2Br
C) CH3CHBr2
D) CH3CH2CH2CH3
E) BrCH2CH2CH2CH2Br
Explanation:
The reaction of ethane with bromine in presence of UV light forms mono substituted ethane at all primary and secondary carbons.
This is an example of free radical substitution.
The structure of ethane and its bromination is shown below:
Among the given options that which is not possible to form is option B) that is CH3CH2CH2Br(propyl bromide).
Remaining all other products are possisble to form on free radical substitution of ethane.
Excited sodium atoms may emit radiation having a wavelength of 589nm. a) What is the wavelength in meters
Answer: When excited sodium atoms may emit radiation having a wavelength of 589nm. It's wavelength in meters is [tex]589 \times 10^{-9} m[/tex].
Explanation:
Given: Wavelength = 589 nm
It is known that,
[tex]1 nm = 10^{-9} m[/tex]
Hence, 589 nm is converted into meters as follows.
[tex]589 nm = 589 nm \times \frac{10^{-9}m}{1 nm}\\= 589 \times 10^{-9} m[/tex]
Thus, we can conclude that when excited sodium atoms may emit radiation having a wavelength of 589nm. It's wavelength in meters is [tex]589 \times 10^{-9} m[/tex].
A product of homolytic fission can never be
a - charged
b - nucleophile
c- both
d-none of these
Answer:
both
Explanation:
A homolytic fission is said to have occurred when the breakage of a bond between two atoms leaves each of the bonding atoms with equal number of electrons. Homolytic fission often results in the creation of radicals.
Since homolytic fission yields two species with equal number of electrons(usually odd number of electrons), the products of such process can not be charged. They can not be nucleophiles because nucleophiles need to possess two electrons which can be shared with another chemical specie.
A student obtained an unknown metal sample that weighed 65.3 g and at a temperature of 99.8oC, he placed it in a calorimeter containing 43.7 g of water at 25.7oC. At equilibrium the temperature of the water and metal was 34.5oC. Knowing the specific heat of the water to be 4.18 J/goC, what is the specific heat of the metal
Answer:
0.377 J/gºC
Explanation:
From the question given above, the following data were obtained:
Mass of metal (Mₘ) = 65.3 g
Initial temperature of metal (Tₘ) = 99.8 °C
Mass of water (Mᵥᵥ) = 43.7 g
Initial temperature of water (Tᵥᵥ) = 25.7 °C
Equilibrium temperature (Tₑ) = 34.5 °C
Specific heat capacity of water (Cᵥᵥ) = 4.18 J/gºC
Specific heat capacity of metal (Cₘ) =?
The specific heat capacity of metal can be obtained as illustrated below:
Heat lost by metal = heat gained by water.
MₘCₘ(Tₘ – Tₑ) = MᵥᵥCᵥᵥ(Tₑ – Cᵥᵥ)
65.3 × Cₘ (99.8 – 34.5) = 43.7 × 4.18 (34.5 – 25.7)
65.3Cₘ × 65.3 = 182.666 × 8.8
4264.09Cₘ = 1607.4608
Divide both side by 4264.09
Cₘ = 1607.4608 / 4264.09
Cₘ = 0.377 J/gºC
Therefore the specific heat capacity of the metal is 0.377 J/gºC
Plz help me ASAP in my final project I am ready to pay 20$
Which gas has the greatest kinetic energy at STP?
H2, Ne, N2 or none
Answer:
none All have the same kinetic energy
Explanation:
The table shows the nature of reactants and products formed in a certain type of chemical reaction.
Nature of Reactants and Products
Reactants
Metal + lonic compound
Products
Metal + lonic compound
Which of the following is true about the type of chemical reaction?
it is a single replacement reaction, and the anions in the two inic compounds are different.
It is a single replacement reaction, and the cations in the two ionic compounds are different.
It is a double replacement reaction, and the anions in the two ionic compounds are different.
It is a double replacement reaction, and the cations in the two ionic compounds are different.
Answer: It is true about the type of reaction that it is a single replacement reaction, and the cations in the two ionic compounds are different.
Explanation:
When one element in a compound is replaced by another element in a chemical reaction then it is called a single replacement reaction.
For example, [tex]K + NaCl \rightarrow KCl + Na[/tex]
Here, potassium metal is replacing the sodium metal in the sodium chloride compound.
As metals become cation by losing an electron in a chemical reaction.
Thus, we can conclude that it is true about the type of reaction that it is a single replacement reaction, and the cations in the two ionic compounds are different.
Answer: Its A
Explanation:
a single replacement reactions, and the ANIONS in the two ionic compounds are different
The tools shown in the diagram are used for gardening Each tool is made up
of two levers that are attached to each other. The handles are the input arms,
and the cutting blades are the output armo
Hand shears
Lopper
Which tool has a greater mechanical advantage, and why?
A. The lopper, because the input work is the same as the output work
B. The hand shears, because their shorter handles transfer force
more quickly to the cutting blade
C. The hand shears, because you can apply less total force to the
handles with one hand
D. The lopper, because its longer handles can produce more output
force with less input force
Answer:
D
Explanation:
The longer handles distribute the force across a longer distance.
Using the balanced equation for the combustion of ethane: 2C2H6 + 7O2 → 4CO2 + 6H2O, how many moles of O2 needed to produce 12 moles of H2O?
Answer:
14 moles of oxygen needed to produce 12 moles of H2O.
Explanation:
We are given that balance eqaution
[tex]2C_2H_6+7O_2\rightarrow 4CO_2+6H_2O[/tex]
We have to find number of moles of O2 needed to produce 12 moles of H2O.
From given equation
We can see that
6 moles of H2O produced by Oxygen =7 moles
1 mole of H2O produced by Oxygen=[tex]\frac{7}{6}[/tex]moles
12 moles of H2O produced by Oxygen=[tex]\frac{7}{6}\times 12[/tex]moles
12 moles of H2O produced by Oxygen=[tex]7\times 2[/tex]moles
12 moles of H2O produced by Oxygen=14 moles
Hence, 14 moles of oxygen needed to produce 12 moles of H2O.
The amount of oxygen required for the combustion of ethane to produce 12 moles of water is 14 moles.
How are the moles produced in reaction calculated?The moles of oxygen produced in the reaction can be given from the stoichiometric law of the balanced chemical equation.
The balanced chemical equation for the combustion of ethane is:
[tex]\rm 2\;C_2H_6\;+\;7\;O_2\;\rightarrow\;4\;CO_2\;+\;6\;H_2O[/tex]
The 6 moles of water are produced from 7 moles of oxygen. The moles of oxygen required to produce 12 moles of water are:
[tex]\rm 6\;mol\;H_2O=7\;mol\;Oxygen\\12\;mol\;H_2O=\dfrac{7}{6}\;\times\;12\;mol\;O_2\\ 12\;mol\;H_2O=14\;mol\;O_2[/tex]
The moles of oxygen required to produce 12 moles of water are 14 moles.
Learn more about moles produces, here:
https://brainly.com/question/10606802
The following statements either define or are closely related to the terms periodic law, period, or group. Match the terms to the appropriate statements.1. This is a vertical arrangement of elements in the periodic table. 2. This is a horizontal arrangement of elements in the periodic table. 3. The properties of the elements repeat in a regular way as the atomic numbers increase. 4. Element 19 begins this arrangement in the periodic table 5. The chemical properties of elements 12, 20, and 38 demonstrate this principle.
Answer:
Please find the complete solution in attached file.
Explanation:
Periodic law is the the properties of the elements that repeat in a regular way as the atomic numbers increase.
What is periodic table?Periodic chart organized collection of all chemical elements arranged roughly according to increasing atomic weight. The periodic recurrence of several features in the elements was originally identified by Dmitry I. Mendeleyev in 1869.
1. This is a vertical arrangement of elements in the periodic table group
2. This is a horizontal arrangement of elements in the periodic table period
3. The properties of the elements repeat in a regular way as the atomic numbers increase periodic law
4. Element 19 begins this arrangement in the periodic table period
5. The chemical properties of elements 12, 20, and 38 demonstrate this principle. periodic law
Therefore, periodic law is the the properties of the elements that repeat in a regular way as the atomic numbers increase.
To learn more about periodic table, here:
https://brainly.com/question/29766008
#SPJ6
A sample of oxygen gas is compressed from 30.6 L to 1.8 L at constant temperature pressure of 1.8 atm. Calculate the amount of energy in joules when the system releases 1.5 KJ of heat?
Answer:
the change in the internal energy of the system is 3,752.67 J
Explanation:
Given;
initial volume of the gas, V₁ = 30.6 L
final volume of the gas, V₂ = 1.8 L
constant pressure of the gas, P = 1.8 atm
Energy released by the system, Q = 1.5 kJ = 1,500 J
Apply pressure-volume work equation, to determine the work done on the gas;
w = -PΔV
w = -P(V₂ - V₁)
w = - 1.8 atm(1.8 L - 30.6 L)
w = 51.84 L.atm
w = 51.84 L.atm x 101.325 J/L.atm
w = 5,252.67 J
The change in the internal energy of the system is calculated as;
ΔU = Q + w
Since the heat is given out, Q = - 1,500 J
ΔU = -1,500 J + 5,252.67 J
ΔU = 3,752.67 J
Therefore, the change in the internal energy of the system is 3,752.67 J
Cathode rays are beams of?
electrons
protons
anions
neutrons
Answer:
Electrons
Explanation:
Electrons are produced when light with enough energy is directed onto the cathode where electrons are ejected as beam towards the screen.
Which of the following was NOT explained by Dalton's atomic theory?
A. the Law of Multiple Proportions
B. the difference between elements and compounds
C.?the difference between isotopes of an element
D. the Law of Conservation of Mass
Answer:
A. The law of Multiple Proportion
determine the budget for tge fitness event.consider the attendance (should tou ask for registration fee.give shirts etc)
The element antimony has two stable isotopes, antimony-121 with a mass of 120.90 amu and antimony-123 with a mass of 122.90 amu. From the atomic weight of Sb = 121.76 one can conclude that: ________
antimony-123 has the highest percent natural abundance
most antimony atoms have a mass of 121.76 amu
antimony-121 has the highest percent natural abundance
both isotopes have the same percent natural abundance
Answer:
antimony-121 has the highest percent natural abundance
Explanation:
percent natural abundance;
121.76 = 120.90 x + 122.90 (1 - x)
121.76 = 120.90 x + 122.90 - 122.90x
121.76 = -2x + 122.90
121.76 - 122.90 = -2x
x= 121.76 - 122.90/ -2
x= 0.57
Where x and 1 - x refers to the relative abundance of each of the isotopes
Percent natural abundance of antimony-121 = 57 %
Percent natural abundance of antimony-123 = (1 - 0.57) = 43%
Let us remember that isotopy refers to a phenomenon in which atoms of the same element have the same atomic number but different mass numbers. This results from differences in the number of neutrons in atoms of the same element.
We can clearly see that antimony-121 has the highest percent natural abundance.
