state three effects of malnutrition in farm animals​

Answers

Answer 1

Answer:

Cows,Pigs,Chicken. They are always in farm


Related Questions

Using your own words, tell me
what is the difference between an Pure Substance and a Mixture? Make sure to give me an example of each.

Answers

Answer:

Hey there!

Mixtures are physically combined and can be separated. For example, sand and water is a mixture.

Pure substances are samples of matter with definite, and unchangeable chemical properties. For example, diamond is a pure substance.

Let me know if this helps :)

a pure substance is a substance that has not been mixed with anything, a mixture has been mixed with another substance. an example is

dirt +water=mud iron is an example of a substance

It takes Serina 1.72 hours to drive to school. Her route is 47 km long. What is Serina's average speed on her drive to school? Your Answer :

Answers

Explanation:

Average speed = distance / time

v_avg = 47 km / 1.72 hr

v_avg = 27.3 km/hr

Ken received a 66 on his first math exam, which counted for 20% of his final grade; he now believes that he won't be able to pass the class. His conclusion best illustrates a pessimistic outlook. the fight-or-flight response. problem-focused coping. relative deprivation.

Answers

Answer:

His conclusion best illustrates a pessimistic outlook.

Explanation:

As seen in the question above, Ken got 20% of his final grade in the first test he did for this class, that is, there will be other tests that can provide him to reach the grade needed to pass the class. However, even if there are possibilities, he believes that he will not pass the class, he does not have a positive and optimistic view of his future in this class and is sure that he will fail. This negative view of the future is an example of a pessimistic outlook.

Matter must have two physical properties 1. Have mass, and 2
∆ Must move
∆ Use energy
∆ Take up space
∆ Be measure
able

Answers

Answer:

Take up space

Explanation:

Actually we know this by the definition of matter which states that "matter is any substance that has mass and takes up space by having volume."

hope it helped you:)

High voltage power is often carried in wire bundles made up of individual strands. In your initial post to the discussion, discuss the forces on the strands of wire due to the current flowing through them. What would happen if the force acted opposite of the known behavior? Provide a detailed description.

Answers

Answer:

There will  be a huge problem of holding the wire strands together, and the power losses will also be amplified.

Explanation:

The force per unit length on two current carrying conductors, lying parallel to each other is proportional to the product of the current through the conductors, and inversely proportional to their distance apart. This force is attractive if the current flows through these conductors in the same direction, and is repulsive if it flows in the opposite direction.

For the strand of wire that make up a high voltage wire bundle, there will be a force of attraction pulling the wires closer to each other, and they will experience the maximum pulling force possible, since they lie next to each other. This force helps to hold these wires in a high tension wire strand together, limiting the area, and reducing "skin effect."

In the case that this wires in the wire strand acts in opposite of the known behavior, the wires will repel and push each other apart. This pushing apart will increase power loss due "skin effect" which is increased by an increase in exposed surface area of the wire strands. This will pose a big problem for high tension transmission.

I need help pls now ​plleeeeeeeeaaassseeeee

Answers

Answer:

[tex]r = \frac{v}{i} = v = ri \\ i = \frac{v}{r} [/tex]

6. What are the methods to control noise pollution?​

Answers

Answer: Some of the ways to control noise pollution are as follows: (1) Control at Receiver's End (2) Suppression of Noise at Source (3) Acoustic Zoning (4) Sound Insulation at Construction Stages (5) Planting of Trees (6) Legislative Measures.

Answer:

You have to:

a) Improve your insulation.

b) Install a fence

c) Use modern Acoustic wall panels

d) Plant trees

e) Reduce electronic volumes,e.t.c.

Explanation:

okay.

Which waves move fast Longitudinal waves or Transverse waves and why???

Answers

Answer:

Transverse wave

Explanation:

Its because in transverse wave the particle displacement is perpendicular to the direction of wave propagation..hope it helps you...

An archer shoots an arrow in the air, horizontally. However, after moving some
distance, the arrow falls to the ground. Name and define the initial force that sets
the arrow in motion. Explain why the arrow ultimately falls down.​

Answers

Answer:

The name of the force is elastic (spring) force

Explanation:

The elastic force which is the restoration force of an elastic (spring like) object that tries to return to its initial non-stretched state built up by the pulling of the bow by the archer (using the muscles) pushes on the arrow which the archer releases the same time he leaves the bow string, and the arrow flies in the direction already pointed by the archer

The arrow ultimately falls down due to gravity forces that acts on all objects within the Earths gravitational field. However due to the speed of constant horizontal speed of the arrow and increasing downward speed of the due to the gravity force, the falling of the arrow looks disappointing.

write down the reading shown on the instrument above in units of the instrument

Answers

Answer:

The reading of the vernier calliper is 3.93 mm

Explanation:

The given instrument is a micrometer screw gauge that has a main scale reading and a vernier scale reading

The the question, we have;

The individual divisions of the main scale = 0.5 mm

The reading on the main scale = 3.5 mm

The reading on the vernier scale = 43

The accuracy of the vernier caliper = 0.01

Reading on the vernier scale multiplied by the accuracy of the vernier caliper = 43 × 0.01 = 0.43 mm

The reading of the micrometer screw gauge = The reading on the main scale + Reading on the vernier scale multiplied by the accuracy of the vernier caliper

Therefore, the reading of the micrometer screw gauge = 3.5 + 0.43= 3.93 mm

The reading of the vernier calliper = 3.93 mm.

solve for x, x=2.7(35)+1/2(-9.7)*35^2 ​

Answers

The answer is:

-5846.75

On a frictionless air track, a 0.30 kg glider moving at 0.40m/s to the right collides with a stationary 0.80kg glider moving at 0.15 m/s to the left. The collision is cushioned by a bumper made of perfectly elastic spring steel. a. What is the velocity of each glider after the collision? b. What is the minimum amount of total kinetic energy during the collision? c. Where is the missing energy?

Answers

Answer:

Explanation:

It is the case of perfectly elastic collision . So we shall apply formula of velocity after collision as follows .

Let  m₁ and m₂ be the mass colliding with velocity u₁ and u₂ and their velocity become v₁ and v₂ after collision .

[tex]v_1=\frac{(m_1-m_2)u_1 }{m_1+m_2)} +\frac{2 m_2u_2}{(m_1+m_2)}[/tex]

Putting the values

[tex]v_1=\frac{ (.30-.80).40 }{( .30+.80)} +\frac{2\times .80\times(-.15) }{(.30+.80 )}[/tex]

= - 0.4 m /s

So direction of .30 kg mass will be reversed .

[tex]v_2=\frac{ ( m_2-m_1) u_2 }{( m_1+m_2)} +\frac{2 m_1u_1}{(m_1+m_2)}[/tex]

putting the values

[tex]v_2=\frac{ ( .80-.30)(-.15) }{( .30+.80)} +\frac{2 \times.30\times.40}{(.30+.80)}[/tex]

= .15 m /s

The direction of .80 kg will become from left to right ie its direction will be reversed .

b ) Minimum amount of kinetic energy will be at the position when they move with common velocity

common velocity

v = .3 x .4 - .8 x .15 / (.3 + .8)

= 0

c )

Missing energy is stored as elastic potential energy in the spring .

what is physics and important of physics​

Answers

Physics is the explanation of our reality, both visible and invisible. With it we can understand the world around us, why things are how they are, and why things do what they do. This understanding allows humans to develop objects that improve quality of life.

Answer:

Confusion

question:
is it multiple choice? or you have to write it

At what altitude the value of ‘g’ would become one fourth (¼)of the surface of the earth?

Answers

Answer:

Explanation:

For acceleration due to gravity g , the expression is

g = GM / R² , where G is gravitational constant M is mass of the earth and R is radius of the earth .

At height h , let the value of it becomes g / 4 , so

g / 4 = GM / ( R + h )²

dividing

4 = [( R+ h)² / R² ]

2 = (R + h) / R

2 = 1 + h / R

h / R = 1

h = R

So at height equal to radius of the earth , acceleration due to gravity becomes 1 /4 of value on the surface of the earth .

A construction worker uses an electrical device to attract fallen nails and sharp objects
from a construction site. What is causing the attraction of the metal objects?
O An electrical wave oscillating perpendicular to the electrical device.
O An electrical charge radiating perpendicular to the wire
O Amagnetic wave radiating perpendicular to an electrical device
O A magnetic wave and electrical current moving in opposite directions

Answers

Answer:

is the last one, a magnetic wave and electrical current moving in opposite directions

Explanation:

opposite directions always attract in magnetic waves and fields

what is the best defintion of efficency

Answers

Answer: Efficiency signifies a peak level of performance that uses the least amount of inputs to achieve the highest amount of output.

Explanation: It minimizes the waste of resources such as physical materials, energy, and time while accomplishing the desired output.

Answer:

The efficiency of a simple machine is defined as the ratio of useful work done by the machine ( output work) to the total work out into the machine ( input work).

Explanation:

Efficiency

If a machine overcomes a load ' L ' and the distance travelled by the load is 'Ld' , the work done by the load is L× LD. It is also called output work or useful work.

Therefore, [tex] \boxed{Output \: work \: = L \: \times \: Ld}[/tex]

Likewise, The effort applied to overcome the load is 'E' and the distance covered by effort is 'Ed' , the work done by effort is E × Ed. It is also called input work.

Therefore, [tex] \boxed{Input \: work = E \times Ed}[/tex]

The efficiency of a simple machine is defined as the ratio of output work to the input work .

Therefore, [tex] \boxed{Efficiency ( η)= \frac{outpt \: work}{input \: work} \times 100\%}[/tex]

Efficiency is expressed in percentage. It is a ratio of two works. A machine is never 100% efficient. It is because no machine is friction free and due to friction, some of the input energy is wastes in the form of heat energy.

[tex] \mathrm{Hope \: I \: helped!}[/tex]

[tex] \mathrm{Best \: regards!}[/tex]

A speed that will permit a train or other equipment to stop within one half the range of vision short of a train, engine, railroad car, man or equipment fouling a track, stop signal or a derail or switch lined improperly. When a train or engine is required to move at restricted speed, the crew must keep a lookout for a broken rail and not exceed 20 mph:__________

Answers

Answer:

This is called restricted speed

Which are the two most popular candidates for gamma-ray bursters? Group of answer choices collisions between a white dwarf and a giant, and merger of two neutron stars hypernova making a black hole, and merger of two neutron stars formation of uranium in the core of a supergiant, and collisions of white dwarfs mergers of two black holes, and merger of a neutron star and a white dwarf hypernova making pulsars, and mergers of two white dwarfs

Answers

Answer:

hypernova making a black hole, and merger of two neutron stars

A bicycle has a momentum of 36 kg • m/s and a velocity of 4 m/s. What is the mass of the bicycle? 9 kg 32 kg 40 kg 144 kg

Answers

Answer:

9 kg

Explanation:

Momentum is mass times velocity.

p = mv

36 kgm/s = m (4 m/s)

m = 9 kg

The mass of the bicycle is 9 kg.

Momentum of the bicycle

The momentum of the bicycle is the product of mass and velocity of the bicycle.

P = mv

where;

P is momentumm is mass v is velocity

m = P/v

m = 36/4

m = 9 kg

Thus, the mass of the bicycle is 9 kg.

Learn more about momentum here: https://brainly.com/question/7538238

A container contains 200g of water at initial temperature of 30°C. An iron nail of mass 200g at temperature of 50°C is immersed in the water. What is the final water temperature? State the assumptions you need to make in your calculations.
[Given the value of specific heat capacity of water is 4200 J kg^-1 °C^-1 and that of iron is
450 J kg^-1 °C^-1]​

Answers

Answer:

The final temperature is 31.94°

Explanation:

The mass of the water in the container m₁ = 200 g = 0.2 kg

The initial temperature of the water,  T₁₁ = 30°C

The mass of the iron, m₂ = 200 g = 0.2 kg

The temperature of the iron T₂₁= 50°C is immersed in the water,

The specific heat capacity of the water, c₁ = 4200 J/(kg·°C)

The specific heat capacity of the iron, c₂ = 450 J/(kg·°C)

Heat capacity relation is given by the formula;

Heat capacity Q = Mass, m × Specific heat capacity, c × Temperature change, (T₂ - T₁)

Given that energy can neither be created nor destroyed, and with the assumption that all the heat lost by the nail is gained by the water we have;

Heat lost by iron nail = Heat gained by the  water

m₁ × c₁ × (T₂ - T₁₁) = m₂ × c₂ × (T₂₁ - T₂)

Where, T₂ is the final temperature

0.2 kg × 4200 J/(kg·°C) × (T₂ - 30) = 0.2 kg × 450 J/(kg·°C) × (50° - T₂)

840·T₂ - 25200 = 4500 - 90·T₂

4500 + 25200 = 840·T₂ + 90·T₂

29700 = 930·T₂

T₂ = 29700/930 = 31.94°.

The final temperature = 31.94°.

A rock is thrown at a window that is located 16.0 m above the ground. The rock is thrown from the ground at an angle of 40.0° above horizontal with an initial speed of 30.0 m/s and experiences no appreciable air resistance. If the rock strikes the window on its upward trajectory, from what horizontal distance from the window was it released?

Answers

Answer:

x = 27.3 m

Explanation:

This is a projectile launching exercise, let's start by looking for the time it takes for the rock to reach the height of the window.

Let's use trigonometry to find the velocities of the rock

           sin 40 = [tex]v_{oy}[/tex] / v

           cos 40 = v₀ₓ / v

           v_{oy}= v sin 40

           v₀ₓ = v cos 40

           v_{oy} = 30 sin 40 = 19.28 m / s

           v₀ₓ = v cos 40

           v₀ₓ = 30 cos 40 = 22.98 m / s

we look for the time

        [tex]v_{y}^2[/tex] = v_{oy}^2 - 2 g y

         v_{y}^2 = 19.28 2 - 2 9.8 16 = 371.71 - 313.6 = 58.118

        v_{y} = 7.623 m / s

we calculate the time

          v_{y} = v_{oy} - gt

          t = (v_{oy} - v_{y}) / g

          t = (19.28 -7.623) / 9.8

          t = 1,189 s

           

since the time is the same for both movements let's use this time to find the horizontal distance

           x = v₀ₓ t

           x = 22.98 1,189

           x = 27.3 m

Describe what happens to water waves when they strike a flat surface?

Answers

Answer:

In this case reflection occurs.

Explanation:

This happens when they bounce on objects that they can not pass through.

Hope it helps

okay.

All large radioactive atoms decay into smaller atoms by releasing alpha particles. Each alpha particle has 2 protons, 2 neutrons, and 0 electrons. The table below describes several neutral, low-mass atoms.

A 4-column table with 4 rows, labeled Stable Isotopes of Low-Mass Elements. The first column labeled element name has entries hydrogen, helium, lithium, beryllium. The second column labeled symbol has entries H, H e, L i, B e. The third column labeled atomic number has entries 1, 2, 3, 4. The fourth column labeled number of neutrons has entries 0, 2, 4, 5.

An alpha particle is also referred to as a nucleus of which isotope?

lithium-7
helium-4
hydrogen-2
helium-2​

Answers

Answer: Helium=4 is the answer

Explanation:

took the test and got it right that'

s the answer.

Answer:

It's b

Explanation:

I took the quiz on EDGE and got it right.

Calculate the intensity of current flowing through a computer that consumes 180W and operates at 120 V.

A.)0,66 A
B.)12600 A
C.)1,5 A
D.)60 A

Answers

Answer:

C) 1.5 A

Explanation:

P = IV

180 W = I (120 V)

I = 1.5 A

A 2-kg cart, traveling on a horizontal air track with a speed of 3m/s, collides with a stationary 4-kg cart. The carts stick together. The impulse exerted by one cart on the other has a magnitude of

Answers

Answer:

The impulse exerted by one cart on the other has a magnitude of 4 N.s.

Explanation:

Given;

mass of the first cart, m₁ = 2 kg

initial speed of the first car, u₁ = 3 m/s

mass of the second cart, m₂ = 4 kg

initial speed of the second cart, u₂ = 0

Let the final speed of both carts = v, since they stick together after collision.

Apply the principle of conservation of momentum to determine v

m₁u₁ + m₂u₂ = v(m₁ + m₂)

2 x 3 + 0 = v(2 + 4)

6 = 6v

v = 1 m/s

Impulse is given by;

I = ft = mΔv = m(

The impulse exerted by the first cart on the second cart is given;

I = 2 (3 -1 )

I = 4 N.s

The impulse exerted by the second cart on the first cart is given;

I = 4(0-1)

I = - 4 N.s (equal in magnitude but opposite in direction to the impulse exerted by the first).

Therefore, the impulse exerted by one cart on the other has a magnitude of 4 N.s.

identify properties of a human body system

Answers

Answer:

integumentary, skeletal, muscular, nervous, endocrine, cardiovascular, lymphatic, respiratory, digestive, urinary, and reproductive

Explanation:

and this is biology not physics

Suppose that you have been chosen for a space mission to a distant planet. Due to the length of time you'll be away from Earth you must carry out physical activity every day. On earth your, strength and conditioning trainer has determined you must do 90 minutes of exercise every day. If the vehicle is travelling at 0.80 c how much time, according to a timer on the space vehicle should you be active to meet your physical activity requirement?

Answers

Answer:

I should be active for 15 hours to meet the physical activity requirement.

Explanation:

Since time dilates in moving objects, we use the formula t = t₀/√(1 - β²) where t = time in space vehicle, t₀ = time on earth = 9 hours and β = v/c where v = speed of space vehicle = 0.8c.

So, t = t₀/√(1 - β²)

t = 9/√(1 - (v/c)²)

= 9/√(1 - (0.8c/c)²)

= 9/√(1 - (0.8)²)

= 9/√(1 - (0.64)

= 9/√0.36

= 9/0.6

= 15 hr

So, according to a timer on the space vehicle, I should be active for 15 hours to meet the physical activity requirement.

Shortly after receiving a traffic ticket for speeding, Fred made numerous comments about the road signs being inadequate and is GPS telling him a different speed limit. This would be an example of:

Answers

Answer:

External locus of control

Explanation:

External locus of control is an attitude people possess that makes them attribute their failures or successes to factors other than themselves. The opposite of this type of attitude is the Internal locus of control where the individuals take responsibility for the outcomes of their actions whether good or bad. One good thing about the external locus of control is that when the individuals with this characteristic record successes, they attribute it to others and this presents them as people with team spirit. However, when they record failures, they do not want to take the blame, but rather attribute it to others.

Fred exhibits an external locus of control because he attributed his speeding to other factors like the road signs and GPS instead of fully admitting that it was his fault.

The distance covered by a body along the x axis is given by x=2t^3+5t^2+t where t is measured in seconds and x is in meter. Find average speed in a time interval from t= 0s and t=2s

Answers

Explanation:

It is given that,

The distance covered by a body along the x-axis is given by :

[tex]x=2t^3+5t^2+t[/tex]

t is in seconds and x is meters

Speed of the body is given by :

[tex]v=\dfrac{dx}{dt}\\\\v=\dfrac{d(2t^3+5t^2+t)}{dt}\\\\v=6t^2+10t+1[/tex]

At t = 0,

[tex]v=6(0)^2+10(0)+1=1\ m/s[/tex]

At t = 2 s,

[tex]v=6(2)^2+10(2)+1=45\ m/s[/tex]

So, the average speed in a time interval from t= 0s and t=2s is 45 m/s.

A group of air particles in a balloon are spread far apart and moving rapidly around inside the balloon. The balloon is placed in a refrigerator for 30 minutes. What would you expect to happen to the appearance of the balloon? Explain your answer in terms of particle movement and their change in temperature. The balloon is removed from the refrigerator and placed on the kitchen counter. What would you expect to happen to the appearance of the balloon? Explain your answer in terms of particle movement and their change in temperature.

Answers

Answer:

1) The balloon will shrink

2) The balloon will grow bigger and regain its shape

Explanation:

By the kinetic theory of gases, we have;

[tex]v_{rms} = \sqrt{\dfrac{3 \cdot R \cdot T}{MW} }[/tex]

[tex]P = \dfrac{n \cdot MW \cdot vrms^2}{3 \cdot V}[/tex]

Where;

[tex]v_{rms}[/tex] = RMS Speed

R = The universal gas constant

T = The temperature

MW = The Molecular weight

n = The number of moles

V = The volume

P = The pressure

1) When the balloon is placed in the refrigerator for  minutes, the temperature inside the balloon will drop and RMS speed will reduce, however due to the elastic wall of the balloon, the pressure will remain the same therefore the volume  will reduce and the balloon will shrink

2) When the balloon is placed on the kitchen counter, the temperature inside the balloon will rise leading to the increase in the RMS speed which will raise the pressure effect on the wall  of the balloon as the balloon is made of elastic material, as the pressure rises, the wall expands to keep the pressure constant and the volume occupied by the air particles will increase, the balloon will grow bigger and regain its shape.

Other Questions
Corporations became a popular way to set up businesses because they:A.raise capital B.limit the risk for individual inventorsC.allow investors to share in the profits D.all of the choices are correct What is advertising used for? Check all that apply. influencing consumer tastes tracking product popularity increasing product awareness promoting company branding gathering data about potential consumers The "family resources" element of Family stress theory suggests that family-based resources such as cohesion, adaptability, and problem-solving may be important factors in whether families survive or deteriorate when stressors are introduced. Group of answer choices Suppose you are paid an annual salary, plus a bonus of 20% on annual sales over $500,000. Consider the two functions f(x) = x 500,000 and g(x) = 0.2x where x equals your annual sales. Which function composition gives the bonus amount when your sales are over $500,000?A)x(f(g))B)x(g(f))C)g(f(x))D)f(g(x)) To make a net from a container, you start by cutting one of the seams along the edge where the two sides meet. If you wanted to make a different net for the container, what would you do differently? 8(4k - 4) = -5k - 32 Your first baby was born yesterday and is healthy and strong. To guard against your premature death, you want to purchase a life insurance policy that will replace $58,000 of your annual income until your child is 20 years old. How much life insurance should you purchase, if you assume a 3% inflation rate A 2-column table with 8 rows. The first column is labeled x with entries negative 6, negative 5, negative 4, negative 3, negative 2, negative 1, 0, 1. The second column is labeled f of x with entries 34, 3, negative 10, negative 11, negative 6, negative 1, negative 2, negative 15. Using only the values given in the table for the function, f(x), what is the interval of x-values over which the function is increasing? (6, 3) (3, 1) (3, 0) (6, 5) How many of the positive integer factors of 15552 are perfect squares? Does anyone know any good websites that sell new/used books for cheap? Which of the following statements is true according to the measurements in the diagram? The assignment for this lesson is to read a passage and answer the following questions: What is the tone of the passage? Which words give the passage this tone, and how does this contribute to the overall meaning of the passage? Her briefcase packed and the directions printed out, Janet straightened her jacket and strode out the door. Yes, she had burned her favorite interview blouse with the iron this morning, and, yes, she had found that her bread was moldy only after she'd taken her first bite of toast. But she was ready, firm in her goal: She would nail this interview and walk out the door with an offer. what was the role played by various committees in the making of the constitution? Work out the circumference of a circle with diameter 1.8 cm.Take a to be 3.142 and give your answer to 1 decimal place. Type the correct answer in the box. Use numerals instead of words. The height of a baseball, in feet, is represented by this expression, where t is time in seconds. -16t squared+64t+3 The height of the baseball after 3.5 seconds is BLANK feet. Which scientific questions can be disproved by conducting tests? Select all that apply. Do video games negatively impact mental health? Will my published scientific paper be successful? Can monkeys communicate with each other? Are dogs the most responsible type of pet? Are vegetables good for growing strong bones? You purchased a share of stock for $120. One year later you received $1.82 as a dividend and sold the share for $136. What was your holding-period return Explain orthographicand multi-viewprojection Please help, 50 points! :) Please do all parts you WILL get brainiestPDF attached below What do psychiatrists do?