Solve for F (15 Points)

Answer:

y = 500 * (2)^x is an exponential function

Step-by-step explanation:

An exponential function is of the form

y = a b^x  where a is the initial value and b is the growth/decay factor

y = 500 * (2)^x is an exponential function

The correct equation that represents an exponential function with an initial value of 500 is:

f(x) = 500(2)x

The opposite of an exponential function is a logarithmic function. A log function and an exponential function both use the same base. An exponent is a logarithm. f(x) = bx is how the exponential function is expressed. The formula for the logarithmic function is f(x) = log base b of x.

We are given that the initial value of the exponential function is 500. The initial value refers to the value of the function when x is equal to zero. Therefore, the value of f(0) is 500.

Out of the four given options, only option (c) represents an exponential function with an initial value of 500, since f(0) is equal to 500 when x is equal to zero:

f(x) = 500(2)^x

Option (a) represents an exponential function with an initial value of 100 and a base of 5.

Option (b) represents a power function, not an exponential function.

Option (d) represents an exponential function with an initial value of 0 and a base of x^2, which can take any value including negative values, thus it doesn't satisfy the conditions of a valid exponential function.

Learn more about logarithmic functions here:

https://brainly.com/question/3181916

#SPJ7

Answer:

Step-by-step explanation:

Find either c or d first. Those are easy and everything will fall into place after those 2 are found.

c: angle c is supplementary with 115. That means that they add up to equal 180; therefore, 115° + c° = 180° so c = 65°.

d: angle d is supplementary with 70. Therefore, 70° + d° = 180° so d = 110°.

a and c are same side interior, so they are also supplementary. That means that a = 115°.

b and d are also same side interior, so they are also supplementary. That means that b = 70°.

Answer:

This is a 4th degree polynomial!

Step-by-step explanation:

Because the polynomial starts of the a number with a 4th degree and decreases down with lower numbers. Simply put, because (x^4) has the largest degree.

Hope this helps, good luck! :)

Answer:

The p-value of the test is 0.166 > 0.05, which means that there is not sufficient evidence at the 0.05 significance level to conclude that the bags contain more than 23.6 ounces.

Step-by-step explanation:

A company distributes candies in bags labeled 23.6 ounces. Test if the mean is more than this:

At the null hypothesis, we test if the mean is of 23.6, that is:

[tex]H_0: \mu = 23.6[/tex]

At the alternative hypothesis, we test if the mean is of more than 23.6, that is:

[tex]H_1: \mu > 23.6[/tex]

The test statistic is:

[tex]z = \frac{X - \mu}{\frac{\sigma}{\sqrt{n}}}[/tex]

In which X is the sample mean, [tex]\mu[/tex] is the value tested at the null hypothesis, [tex]\sigma[/tex] is the standard deviation and n is the size of the sample.

23.6 is tested at the null hypothesis:

This means that [tex]\mu = 23.6[/tex]

The local bureau of weights and Measures randomly selects 60 bags of candies and obtain a sample mean of 24 ounces. Assuming that the standard deviation is 3.2.

This means that [tex]n = 60, X = 24, \sigma = 3.2[/tex]

Value of the test statistic:

[tex]z = \frac{X - \mu}{\frac{\sigma}{\sqrt{n}}}[/tex]

[tex]z = \frac{24 - 23.6}{\frac{3.2}{\sqrt{60}}}[/tex]

[tex]z = 0.97[/tex]

P-value of the test and decision:

The p-value of the test is the probability of finding a sample mean above 24, which is 1 subtracted by the p-value of z = 0.97.

Looking at the z-table, z = 0.97 has a p-value of 0.834.

1 - 0.834 = 0.166

The p-value of the test is 0.166 > 0.05, which means that there is not sufficient evidence at the 0.05 significance level to conclude that the bags contain more than 23.6 ounces.

Answer:

It's a (space) lot,... haha na I just kidding,... you're good,... I mean I'm not kidding cause it is correct,... but you are good,... like totally cool,... anyway,...

Step-by-step explanation:

By x the just mean what number,... so,...

what number + 6 = 7,

6 + what number = 7,

2 + what number + 5 = 7,

1 + what number = 7,

what number + 4 + what number = 7,

So that is what it mean,... hope it helps, alot LOL,... and,... Chow

Answer:

No

Step-by-step explanation:

Because intergerss are there positive opposite and its negative

Answer and Step-by-step explanation:

-626 is an integer because it is a whole number, not a fraction.

Integers can be both positive and negative numbers. What can't be an integer are fractions and decimals.

#teamtrees #PAW (Plant And Water)

I hope this helps!

Answer:

187 sweets

Step-by-step explanation:

8 units - 6 units = 2 units

2 units = 22 sweets

1 unit = 22 sweets ÷ 2

= 11 sweets

Total amount of sweets = 11 sweets × (6 units + 3 units + 8 units) = 11 sweets × 17 = 187 sweets

Answer:

Remember that the area of a square of sidelength L is:

A = L^2

And the area of a circle of diameter D is:

A = pi*(D/2)^2

If we inscribe a square in a circle, we will get four segments, like the ones shaded in the image below:

Notice that the diameter of the circle will be equal to the diagonal of the square.

And the diagonal of a square of side length L is:

d = √(2)*L

knowing that the side length of our square is 6 inches, the diameter of the circle will be:

D = √2*6in

Now, the total area of the four shaded parts will be equal to the difference between the area of the circle and the area of the square.

The area of the circle is:

A = pi*(√2*6in/2)^2 = (pi/2)*36in^2

The area of the square is:

A' = (6in)^2 = 36in^2

The difference is:

A - A' =  (pi/2)*36in^2 - 36in^2 = (pi/2 - 1)*36in^2

And there are 4 of these segments, then the area of every single one is one-fourth of that:

a = (1/4)*(pi/2 - 1)*36in^2 = (pi/2 - 1)*9 in^2

The area of each segment is:

a =  (pi/2 - 1)*9 in^2

if we replace pi by 3.14, the exact area will be:

a = (3.14/2 - 1)*9in^2 = 5.13 in^2

Answer:

m=5/3

Step-by-step explanation:

Answer:

5/3 or 1 2/3

Step-by-step explanation:

First you subtract 4/3 from the left side. 23/6-4/3= 2 1/2

Then you multiply 2 on both sides, this simplifies the left side to be 3m and the right side 5.

Lastly, you divide by 3 to isolate the variable m.

And you get 5/3, which also equals 1 2/3

Answer:

Step-by-step explanation:

The thing to remember is that absolute can be relative but relative can't be absolute. In other words, absolute min is the very lowest point on the graph and there's usually only one (unless there are 2 absolute mins that have the same y value) while relative mins can occur at several points on a graph. That means that the only relative min point on the graph occurs at (-3, 4); the absolute min occurs at (5, -6).

Answer:

the 1 one will be the answer

Answer:

missing angle= 44°

Step-by-step explanation

sin=opposite/hypotenuse

cos=adjacent/hypotenuse

tan=opposite/adjacent

x is opposite of 19 and  41 is the biggest side so that is the hypotenuse. with that being said you will put in your calculator sin(19/41) and make sure that it is in radian mode. This gives you the answer of 44°

Answer:

2

Step-by-step explanation:

The initial value is the y value of the first term shown ( when x=1)

y = 2 when x=1

The initial value is 2

Answer:

What is the initial value of the sequence?

Step-by-step explanation:

Edge 2021

Answer:

3

Step-by-step explanation:

Here's the rundown of values:

12=9

9=6

6=3

3rd value=3

*The values are created through going through the numerical process.

Answer: 214.7425g

Step-by-step explanation:

Total benzene = 245mL

Density of benzene = 0.8765g/mL

Which means there is 0.8765g benzene per mL

Mass = 245×0.8765

= 214.7425g

Therefore there is 214.7425g of mass in 245mL benzene

Must click thanks and mark brainliest

If the density of benzene is 0.8765 g/mL, the mass of benzene is 214.74 grams.

Given the following data:

To find the mass of benzene:

Density is mass all over the volume of a substance or an object.

Mathematically, the density of a substance is given by the formula;

[tex]Density = \frac{Mass}{Volume}[/tex]

Making mass the subject of formula, we have;

[tex]Mass = Density[/tex] × [tex]Volume[/tex]

[tex]Mass = 0.8765[/tex] × [tex]245[/tex]

Mass = 214.74 grams.

Therefore, the mass of benzene is 214.74 grams.

Read more: https://brainly.com/question/18320053

Answer:

$61.50

Step-by-step explanation:

14.25(4) + 4.50

= 57.00 + 4.50

= 61.50

[tex] \sin(x - 20°) = \cos(42°) [/tex]

[tex] \sin(x - 20°) = \sin(90° - 42°) [/tex]

[tex] \sin(x - 20°) = \sin 48°[/tex]

[tex]x - 20° = 48°[/tex]

[tex]x = 48° + 20°[/tex]

[tex]x = 68°[/tex]

Answer:68

Step-by-step explanation:

Answer:

2)

3)

4)

5)

6)

Step-by-step explanation:

Answer:

4x^3

Step-by-step explanation:

20 x^5 + 28 x^4 + 12x^3

4*5*x^5  + 4*7*x^4 + 4*3*x^3

Factor out 4x^3

4x^3 ( 5x^2 + 7x +3)

5+a2+ab-9c

let's just substitute a with 5, b with 4 and c with 0

5+5*2+5*4-9*0

= 5+10+20+0

= 35

Answer:

36

Step-by-step explanation:

girls:boys=2:3

2units=24

1unit=24÷2=12

boys have 3 units

3units=12 x 3 =36

There are 36 boys

Answer:

5

Step-by-step explanation:

when 13 is subtracted from 5 we get 8

again when 8=2m

8/2=m

4=m

.

Answer:

Yo it's A

Step-by-step explanation:

An infinite sequence is one that goes on forever, in this case it's the one with the "..." at the end because that is what shows that the sequence is infinite

There are two infinite sequences, and you just have to figure out which one is an arithmetic sequence.  An arithmetic sequence is one that subtracts or adds the same number every time to the previous number.

Out of the two infinite sequence choices, it's obviously not B because you aren't subtracting or adding the same number every time

It's A because you add 122 every time and it goes on forever.

hope this helps lol

Answer:

A.

–2; –250; –156,250

Step-by-step explanation:

A(1) = -2 x 5(1) - 1 = -11

A(4) = -2 x 5(4) -1 = -41

A(8) = -2 x 5(8) -1 = -81

...............................................................................................................................................

an=a1(r)^(n-1)

a1=first term

r=common ratio

n=which term

so

an=-2(5)^(n-1)

first term is -2

4th term is subsitue 4 for n

a4=-2(5)^(4-1)

a4=-2(5)^3

a4=-2(125)

a4=-250

4th term is -250

--------------------------

8th term

a8=-2(5)^(8-1)

a8=-2(5)^7

a8=-2(78125)

a8=-156250

8th term is -156250

...............................................................................................................................................

A(1)=2*5^1-1=2*5^0=2*1=2

a(4)=2*5^4-1=2*5^3=2*125=250  

a(8)=2*5^8-1=2*5^7=2*78,125=156,250

...............................................................................................................................................

2, 250, 156, 250

Answer:

48

Step-by-step explanation:

9,18

6,12,18,24,30

18 + 30 = 48

Answer:

[tex]Expected = 0.09375[/tex]

Step-by-step explanation:

Given

[tex]Balls = 4[/tex]

[tex]n = 4[/tex] --- selection

Required

The expected distinct colored balls

The probability of selecting one of the 4 balls is:

[tex]P = \frac{1}{4}[/tex]

The probability of selecting different balls in each selection is:

[tex]Pr = (\frac{1}{4})^n[/tex]

Substitute 4 for n

[tex]Pr = (\frac{1}{4})^4[/tex]

[tex]Pr = \frac{1}{256}[/tex]

The number of arrangement of the 4 balls is:

[tex]Arrangement = 4![/tex]

So, we have:

[tex]Arrangement = 4*3*2*1[/tex]

[tex]Arrangement = 24[/tex]

The expected number of distinct color is:

[tex]Expected = Arrangement * Pr[/tex]

[tex]Expected = 24 * \frac{1}{256}[/tex]

[tex]Expected = \frac{3}{32}[/tex]

[tex]Expected = 0.09375[/tex]

Answer:

- 10, - 40

Step-by-step explanation:

200, 170, 140, .... - 10, - 40 ....

30 × 5 = 150

140 - 150 = - 10

- 10 - 30 = - 40

If both are complementary then their sum will be 90°

[tex]\\ \sf\longmapsto m<A+m<B=90[/tex]

[tex]\\ \sf\longmapsto 2x-10+x-2=90[/tex]

[tex]\\ \sf\longmapsto 2x+x-10-2=90[/tex]

[tex]\\ \sf\longmapsto 3x-12=90[/tex]

[tex]\\ \sf\longmapsto 3x=90+12[/tex]

[tex]\\ \sf\longmapsto 3x=102[/tex]

[tex]\\ \sf\longmapsto x=\dfrac{102}{3}[/tex]

[tex]\\ \sf\longmapsto x=34[/tex]

Now

[tex]\\ \sf\longmapsto <A=2x-10=2(34)-10=68-10=58[/tex]

Answer:

5.425

Step-by-step explanation:

310° = 310° × π ÷ 180°

= 310° × 3.142 ÷ 180°

= 310° × 0.0175

= 5.425

Answer:

Step-by-step explanation:

i got it right on khan[tex]\frac{31\pi }{18}[/tex]

Answer:

y =1/2x -4

Step-by-step explanation:

x1 y1  x2 y2

2 -3  4 -2

(Y2-Y1) (-2)-(-3)=   1  ΔY 1

(X2-X1) (4)-(2)=    2  ΔX 2

slope=   1/2    

B= -4          

Y =0.5X -4