Answer:
visual effect
Explanation:
A slide transition is the visual effect that occurs when you move from one slide to the next during a presentation. You can control the speed, add sound, and customize the look of transition effects.
What is the full form of USB ?
Answer:
universal serial bus: an external serial bus interface standard for connecting peripheral devices to a computer, as in a USB port or USB cable.
Explanation:
which animal is the computer to store data information and instruction
Answer:
human is the answwr of the quest
two reasons for compressing files before uploading them to cloud storage
Answer:
Storage. File compression reduces the amount of space needed to store data. Using compressed files can free up valuable space on a hard drive, or a web server. Some files, like word files, can be compressed to 90 percent of their original size.
Explanation:
The main advantages of compression are reductions in storage hardware, data transmission time, and communication bandwidth. This can result in significant cost savings. Compressed files require significantly less storage capacity than uncompressed files, meaning a significant decrease in expenses for storage.
Select the correct answer.
Which design diagram uses the crow’s foot notation to show cardinality?
A.
activity diagram
B.
ER diagram
C.
class diagram
D.
flowchart
E.
sequence diagram
Answer:
B
Explanation:
In an ERD, the Crow Foot Notation Symbols are used with cardinality.
Hope it helps you
When in global configuration mode, which steps are necessary to edit an ip address on an Ethernet interface?
Answer:
I. You should enter interface configuration mode.
II. Configure the IP address and subnet mask.
Explanation:
A node refers to the physical device that make up a network and are capable of sending, receiving, creating and storing data in communication.
Some examples of network nodes are modem, hubs, computer, switches, phone and printers.
In Computer networking, network devices such as routers and switches are usually configured (programmed) through the use of specific network commands commonly referred to as configs e.g show int description, config terminal (config t), show IP address, etc.
In Cisco devices, there are five (5) main types of command modes;
1. Sub-interface configuration mode.
2. Interface configuration mode.
3. Line configuration mode.
4. Router configuration method.
5. Global configuration mode.
Global configuration mode is a configuration mode that avail network engineers and end users with the ability to modify or edit the running (global) system configuration of a networking device. Thus, any change effected at the global configuration mode will affect the network device as a whole.
In global configuration mode, the steps which are necessary to edit an ip address on an Ethernet interface include;
I. You should enter interface configuration mode using the "configure terminal" command.
II. Configure the IP address and subnet mask.
See an example below;
"Router(config-if)# IP address 192.168.1.2 255.255.255.0"
When planning out the new data center where he is building a private cloud, Juan knows that he needs to account for all of the physical and logical resources that the servers will need in that new network. Which of the following must he account for in regard to the network part of his planning?
a. Ensure that he has enough MAC addresses for the virtual machines.
b. Ensure that he has enough IP addresses for the networks and subnets to account for the vNICs that are in bridging mode.
c. Ensure that there is one network card or port per virtual machine on each host.
d. Ensure that all of the virtual machines are configured with the same VLAN so that they can all communicate with one another.
Consider a system with seven processes: E, F, G, H, I, J, K and six resources: U, V, W, X, Y, Z. Process E holds U and wants V. Process F holds nothing but wants W. Process G holds nothing but wants V. Process H holds X and wants V and W. Process I holds W and wants Y. Process J holds Z and wants V. Process K holds Y and wants X. Is this system deadlocked?
a. Yes
b. No
Answer:
a. Yes
Explanation:
System is deadlock due to process HIK. Process H holds X and wants V and W. Process I holds W and wants Y. Process K holds Y and wants X. The system will become deadlock due to these three different processes.
Select the correct navigational path to create a combination chart. Select the chart. Click the Chart Tools tab. Select the data series from the Chart Area list. Click the Chart Tools tab. Click Change Chart Type. Choose a chart type for the selected data series and click OK.
Answer:
format and design
Explanation:
Answer:
format and design
Explanation:
Write a program that first gets a list of integers from input. The input begins with an integer indicating the number of integers that follow. Then, get the last value from the input, which indicates a threshold. Output all integers less than or equal to that last threshold value. Assume that the list will always contain fewer than 20 integers.
Ex: If the input is
5 50 60 140 200 75 100
the output is
50 60 75
Answer:
The program in Python is as follows:
num = int(input())
numList = []
for i in range(num+1):
numInput = int(input())
numList.append(numInput)
for i in range(len(numList)-1):
if numList[i] <= numList[-1]:
print(numList[i],end=" ")
Explanation:
This gets input for the number of integers
num = int(input())
This initializes an empty list
numList = []
This iterates through the number of integers and gets input for each
for i in range(num+1):
numInput = int(input())
The inputs including the threshold are appended to the list
numList.append(numInput)
This iterates through the list
for i in range(len(numList)-1):
All inputs less than or equal to the threshold are printed
if numList[i] <= numList[-1]:
print(numList[i],end=" ")
This criterion is linked to a Learning OutcomeCreate checkDuplicates method that receives an array of ints, and an int as parameters. It will return true if the int is found in the array, and false if the int is NOT found in the array. Call the checkDuplicates method from both the MegaMillionsLottery constructor, and the getUserPicks() method.
Answer:
Explanation:
The MegaMillions Lottery class was not provided and neither was the getUserPicks() method. Since they were not found online either, I have created the checkDuplicates method so that it works standalone. Therefore, you can simply call the method from wherever you need by pasting the call line where it needs to be called. A test case has been created in the main method so that you can see the method in action. The output is seen in the attached image below.
public static boolean checkDuplicate(int[] myArr, int element) {
for (int x : myArr) {
if (x == element) {
return true;
}
}
return false;
}
Select the correct answer.
Adam is part of a software design team assigned to create the interface for a kiosk application. What tool will he use to design the interface?
A.
timing chart
B.
pseudocode
C.
block diagram
D.
data dictionary
Answer:
its not block diagram
it could be data dictionary
Explanation:
The process by which the kernel temporarily moves data from memory to a storage device is known as what?
Answer: Swapping
Explanation:
Swapping is referred to as the process by which the kernel temporarily moves data from memory to a storage device.
Swapping is simply a memory management scheme whereby the process can be swapped temporarily from the main memory to the secondary memory in order for the main memory to be available for other processes. Swapping is used for memory utilization.
the computer that process data that are represented in the form of discrete values are called
Answer:
Digital computer
Explanation:
The computer that process data that are represented in the form of discrete values are called digital computer.
what is example of application of machine learning that can be imposed in eduction. (except brainly.)
Answer:
Machine Learning Examples
Recommendation Engines (Netflix)
Sorting, tagging and categorizing photos (Yelp)
Self-Driving Cars (Waymo)
Education (Duolingo)
Customer Lifetime Value (Asos)
Patient Sickness Predictions (KenSci)
Determining Credit Worthiness (Deserve)
Targeted Emails (Optimail)
What tool can help discover and report computer errors when you first turn on a computer and before the operating system is launched?
Answer:
a post diagnostic
Explanation:
Answer:
post diagnostic Card
Explanation:
a post diagnostic card helps discover computer errors.
Use the Internet to research external storage devices. Find at least three devices, with a minimum storage size of 1 terabyte (TB), from three different manufacturers. Write a paragraph, IN YOUR WORDS, for each device explaining the features and benefits. Provide the retail cost and include a reference link to each device. Next, write
Hi, you've asked an incomplete question. However, I provided suggestions on getting the desired information.
Explanation:
Considering the fact that you are required to find information about not just the cost, but also the features and benefits of three storage devices having a minimum storage size of 1 terabyte, it is recommended that you check this on a reputable e-commerce site (eg Amazon).
There you could find information about their features and benefits, as well as customer feedback about their experience using these devices.
If x=50.7,y=25.3 and z is defined as integer z,calculate z=x+y
Answer:
Ans: 76
Explanation:
z=x+y
=50•7 + 25•3
=76#
Catherine is designing the backup strategy for the new private cloud that her company is implementing. She specifies that a full backup will be done weekly on Sunday mornings. She also specifies that another backup will be run every morning after that. Which of the following backup types will use the least amount of disk space for the daily backups?
a. Cumulative
b. Additive
c. Incremental
d. Differentia
Answer:
Incremental ( C )
Explanation:
The incremental backup system should be used since Catherine intends to backup files every morning and this is because Incremental backup uses the least amount of disk space by simply copying data of files that have been changed after its previous backup session . Instead of copying all the files that it has previously copied in the previous backup session
In which generation of computers are we in?
when describing a software lincense what does the phrase "open source" mean?
A chain of dry-cleaning outlets wants to improve its operations by using data from
devices at individual locations to make real-time adjustments to service delivery.
Which technology would the business combine with its current Cloud operations
to make this possible?
O Edge Computing
O Blockchain
O Data Visualization
O Public Cloud
Write a SELECT statement that returns a single value that represents the sum of the largest unpaid invoices submitted by each vendor. Use a derived table that returns MAX(InvoiceTotal) grouped by VendorID, filtering for invoices with a balance due
Answer:
Create table vendor(vendor_id int,due_invoice int,invoiceTotal int);
Create view v as select vendor_id,max(due_invoice) as unpaid from vendor;
Select sum(unpaid) from v;
Select vendor_id,invoiceTotal from vendor group by vendor_id;
There is an interface I that has abstract class AC as its subclass. Class C inherits AC. We know that C delegates to an object of D to perform some computations. Besides, C consists of two C1s and one C2 as subcomponents. Object of C2 is still reusable when its major component C is depleted. C1 has a method that takes in an object of E as argument. Which one is invalid
Answer:
are u in HS or college work
I am trying to understand
what are the application areas of the computer ? list them.
Answer:
Home. Computers are used at homes for several purposes like online bill payment, watching movies or shows at home, home tutoring, social media access, playing games, internet access, etc. ...
Medical Field.
Entertainment.
Industry.
Education.
Government.
Banking.
Business.
What is garbage in garbage out?
Answer: it means if you give a bad input it will result in a ad output.
Explanation:
It has n acronym GIGO which refers to how the quality of an output is determined by the quality of input.
Garbage is trash info... or input. And grabage out is the trash output.
Write a program that divides mystery_value by mystery_value #and prints the result. If that operation results in an #error, divide mystery_value by (mystery_value + 5) and then print the result. If that still fails, multiply mystery_value #by 5 and print the result. You may assume one of those three things will work.
1 mystery_value = 5 2 3 #You may modify the lines of code above, but don't move them! 4 #when you submit your code, we'll change these lines to 5 #assign different values to the variables. 6 I 7 #write a program that divides mystery value by mystery_value 8 #and prints the result. If that operation results in an 9 #error, divide mystery value by (mystery_value + 5) and then 10 #print the result. If that still fails, multiply mystery_value 11 #by. 5 and print the result. You may assume one of those three 12 #things will work, 13 # 14 #You may not use any conditionals. 15 # 16 #hint: You're going to want to test one try/except structure 17 #inside another! Think carefully about whether the second 18 #one should go inside the try block or the except block. 19 20 21 #Add your code here! 22
Answer:
mystery_value = 5
try:
print(mystery_value / mystery_value)
except:
try:
print(mystery_value / (mystery_value + 5))
except:
print(mystery_value * 5)
It's currently 1:00 in the afternoon. You want to schedule the myapp program to run automatically tomorrow at noon (12:00). What two at commands could you use
Answer:
at 12 pm tomorrow
at now +23 hours
Explanation:
The at command could be used in the command line to perform a scheduled command in Unix related systems. The at command coule be ua d to program a complex script or used to perform simple scheduled reminders.
The at command is initiated by first writing the at string followed by the condition or statement to be performed.
Currently (1:00 pm) ; To make a schedule for 12pm then that will be at noon the following day:
at 12:00 pm tomorrow
Or :
Using the number of hours between the current tone and the schedule time : 12 pm tomorrow - 1:00 pm today is a difference of 23 hours ;
Hence, it can be written as :
at +23 hours
major characteristics of the bus in computer architecture
Answer:
A bus is characterized by the amount of information that can be transmitted at once. This amount, expressed in bits, corresponds to the number of physical lines over which data is sent simultaneously. A 32-wire ribbon cable can transmit 32 bits in parallel.
In computer architecture, a bus (related to the Latin “omnibus”, meaning “for all”) is a communication system that transfers data between components inside a computer, or between computers. This expression covers all related hardware components (wire, optical fiber, etc.)
Explanation:
Select the correct statement(s) regarding PONS. a. only MMF cables can be used, since MMF enables greater data capacities compared to SMF b. PONS systems require active amplifiers, since high frequency signals attenuate quickly over distance c. PONS systems use passive devices between OLT and ONT d. all are correct statements
Answer:
The correct statement regarding PONS is:
c. PONS systems use passive devices between OLT and ONT
Explanation:
PON means Passive Optical Network. Based on fiber-optic telecommunications technology, PON is used to deliver broadband network access to individual end-customers. It enables a single fiber from a service provider to maintain an efficient broadband connection for multiple end-users (homes and small businesses). OLT means Optical Line Terminal, while ONT means Optical Network Terminal. They provide access to the PON.
When a virtual machine is
created, it is assigned
_____such as the CPU,
_____,Network Interface,
and storage..
Answer:
Resources, RAM
Explanation:
May be another choice for resources but the second one is definently RAM
