Scientists often look at how much isotopes of ______
have decayed to help estimate the age
of a fossil or once-living material.
Answers
Answer:
If im correct it’s radioisotope
Explanation:
Scientists often look at how much of isotopes of : Carbon-14 have decayed
To determine the age of fossils archeologist make use of the carbon-14 dating ( i.e. making use of naturally occurring radioisotope ¹⁴C ) which is used to determine the age of fossils or material that were once in living on earth.
Carbon has about three (3) isotopes ( Carbon-12, Carbon-13 and Carbon-14 ) .but Carbon-14 isotope is most useful in determining the age of fossils and once-living things
Hence we can conclude that scientists often look at how much of isotopes of Carbon-14 have decayed to help estimate the age of fossils.
learn more : https://brainly.com/question/1296663
Related Questions
Mendeleev's proposal of periodic table was based on:
Answers
The proposal of the periodic table was based upon properties that appeared with some regularity by laying out the elements from lightest to heaviest.
[hope this is helpful!:))]
1.2 dkg to grams now I have to say extra stuff for it to submit
Answers
Answer:
12 grams and I have to write something longer so just ignore this
Calculate the pH of the following?
a) 0.12 M NaNO2
b) 0.10 M CH3NH3Cl
c) .45 M NaOCl?
Answers
what do igneous rocks become when they break down and settle into layers?
Answers
Answer:
Sedimentary rocks
Explanation:
Igneous rocks will become sedimentary rocks when they break down and settle into layers .
Igneous rocks are rocks that are formed by the cooling and solidification of magma within or on the earth crust.
When agents of weathering and denudation forces acts on a rock body, they break them down producing sediments in the process.
Sediments are transported into depositional basins where they are laid down and cemented together. This in turn forms sedimentary rocks. The break down and settling of sediments leads to the formation of sedimentary rocks.A 13.9 - g piece of metal ( specific heat capacity is 0.449 /g^ C)who whose temperature is 54.2 degrees * C was added to a sample of water at 13.4 degrees * C in a constant - pressure calorimeter of negligible heat capacity . If the final temperature of the water is 15.6 °C, calculate the mass of the water in the calorimeter .
Answers
Answer:
26.2g = Mass of water in the calorimeter
Explanation:
The heat absorbed for the water is equal to the heat released for the metal. Based on the equation:
Q = m*C*ΔT
Where Q is heat, m is the mass of the sample, C is specific heat of the material and ΔT is change in temperature
Replacing we can write:
[tex]m_{metal}*C_{metal}*dT_{metal}=m_{water}*C_{water}*dT_{water}[/tex]
13.9g * 0.449J/g°C * (54.2°C-15.6°C) = m(H₂O) * 4.184J/g°C * (15.6°C-13.4°C)
240.9J = m(H₂O) * 9.2J/g
26.2g = Mass of water in the calorimeterVisible light is a part of what spectrum
Answers
Answer:
Visible Spectrum/Electromagnetic spectrum
Explanation:
The visible spectrum is the portion of the electromagnetic spectrum that is visible to the human eye.
HELP ME!!
If a water molecule (H20) has two hydrogen atoms and one oxygen atom, how would you describe the make-up of a carbon dioxide molecule (C02)?
1 carbon atom, 1 oxygen atom
1 carbon atom, 2 oxygen atoms
2 carbon atoms, 2 oxygen atoms
2 carbon atoms, 1 oxygen atom
Answers
Answer:
2
Explanation:
PLEASE HURRY
Which of the following is a subsurface event that takes place during the rock cycle?
Deposition
Erosion
Weathering
Plate tectonics
Answers
Answer:
Option D, Plate Tectonics
In the rock cycle, surface events takes place at the surface of earth. Thus,
weathering and erosion are surface events, while the subsurface events he take place in the deeper section of the earth . Examples of sub surface events are plate tectonics and mountain building or anything that takes place in the inner core of earth.
Explanation:
Answer:
Option D, Plate Tectonics
In the rock cycle, surface events takes place at the surface of earth. Thus,
weathering and erosion are surface events, while the subsurface events he take place in the deeper section of the earth . Examples of sub surface events are plate tectonics and mountain building or anything that takes place in the inner core of earth.
Explanation:
Option D, Plate Tectonics
In the rock cycle, surface events takes place at the surface of earth. Thus,
weathering and erosion are surface events, while the subsurface events he take place in the deeper section of the earth . Examples of sub surface events are plate tectonics and mountain building or anything that takes place in the inner core of earth.
What is the charge for the cation in MnS2
Answers
What is the name of the ionic compound with the formula:
AlF3
Answers
Answer:
potassium chloride.
Which of the following elements is used by your body? A) aluminum B) helium C) calcium D) all of the above
Answers
A metal can form
A.
a stable nucleus
B.
an anion
C.
a new family
D.
a cation
Answers
For species that reproduce asexually, all their offspring are
A. genetically identical
B. genetically different
C. almost identical
D. slightly different
Answers
Answer:
A. genetically identical
Explanation:
Asexual reproduction produces offspring that are genetically identical to the parent because the offspring are all clones of the original parent. A single individual can produce offspring asexually and large numbers of offspring can be produced quickly
All the offspring that are produced in the process are genetically identical.
When we talk about this mode of reproduction, we talk about a mode of reproduction in which an organism reproduces without the fusion of gametes. This occurs essentially by cell division.
When this occur, there is no crossing of genetic material as such, all the offspring that are produced in the process are genetically identical.
Learn more about reproduction:https://brainly.com/question/1301963
Calculate the volume, at STP, of a 0.950 g sample of Carbon Monoxide gas, CO.
Answers
Answer:
0.76L is the pressure of CO at STP
Explanation:
To solve this question we must use combined gas law:
PV = nRT
Where P is the pressure of the gas (1atm at STP)
V is volume (Our incognite)
n are moles of the gas (0.950g * (1mol/28g) = 0.034 moles
R is gas constant (0.082atmL/molK)
T is absolute temperature (273.15K at STP)
V = nRT/P
V = 0.034mol*0.082atmL/molK*273.15K / 1atm
V = 0.76L is the pressure of CO at STP
Can anyone explain and answer?
Which physical change are both exothermic
A)condensation and evaporation
B)evaporation and melting
C)freezing and condensation
D)melting and freezing
Answers
Answer:
I would say C.)
Explanation:
Freezing and condensation are both ways that heat is let out from an object.
To locate objects in their environments, bats in flight and porpoises under water both use ultrasound waves with frequencies that are beyond human hearing. These animals produce an ultrasonic wave and then detect echoes from nearby objects in order to determine the location of the object Porpoise Bat If a porpoise and a bat both produce ultrasonic waves when they are 16 meters from an object, which animal would hear its echo first? The bat would hear its echo first because sound travels faster in air than in water. O The porpoise would hear its echo first because sound travels faster in water than in air. O The bat would hear its echo first because the frequency of sound waves is greater in air than in water 0 The porpoise would hear its echo first because the frequency of sound waves is greater in water than in air.
Answers
Answer: The porpoise would hear its echo first because sound travels faster in the water than in air.
Explanation:
why is it important that the level of the sea water does not go above the level of the filter paper
Answers
Answer:
The water (the substance) that passes through the filter paper is called the filtrate. If your mixture is a solution, such as salty water, then filtering will not separate the salt from the water. Instead, by heating the soluton the solvent (water) evaporates leaving the solid (salt) behind.
Explanation:
Osmium metal, the densest element, has a density of 22.6 g/mL, while hydrogen, the least dense element, has a density of 8.99 e-5 g/mL. Calculate the volume occupied by 1.00 g of each element. How many times more dense is osmium than hydrogen?
Answers
Answer:
1. Volume of osmium = 0.044 mL
2. Volume of Hydrogen = 11123.47 mL
3. Osmium is 251390 times denser than hydrogen
Explanation:
From the question given above, the following data were obtained:
Density of osmium = 22.6 g/mL
Density of Hydrogen = 8.99×10¯⁵ g/mL
Mass of osmium = 1 g
Mass of Hydrogen = 1 g
1. Determination of the Volume of osmium.
Density of osmium = 22.6 g/mL
Mass of osmium = 1 g
Volume of osmium =?
Density = mass /volume
22.6 = 1 / volume
Cross multiply
22.6 × volume = 1
Divide both side by 22.6
Volume = 1 / 22.6
Volume of osmium = 0.044 mL
2. Determination of the Volume of Hydrogen.
Density of osmium = 8.99×10¯⁵ g/mL
Mass of osmium = 1 g
Volume of osmium =?
Density = mass /volume
8.99×10¯⁵ = 1 / volume
Cross multiply
8.99×10¯⁵ × volume = 1
Divide both side by 8.99×10¯⁵
Volume = 1 / 8.99×10¯⁵
Volume of Hydrogen = 11123.47 mL
3. Determination of the number of times osmium is denser than hydrogen.
Density of osmium (Dₒ) = 22.6 g/mL
Density of Hydrogen (Dₕ) = 8.99×10¯⁵ g/mL
Dₒ / Dₕ = 22.6 / 8.99×10¯⁵
Dₒ / Dₕ = 251390
Cross multiply
Dₒ = 251390 × Dₕ
Thus, osmium is 251390 times denser than hydrogen.
Which best describes the effect of a ecosystem when populations of white-tailed deer are overhunted by people in an area?
A. It disrupts the balance between predators and prey
B. It decreases the amount of producers
C. It directly increases the population of decomposers
D. It decreases competition for food among carnivores
Answers
Answer:
A. It disrupts the balance between predators and prey
Explanation:
The effect on the ecosystem when populations of white - tailed deer are overhunted is that it disrupts the balance between predators and prey within the ecosystem.
The whited - tailed deer is the usually the prey. The carnivores are the cats and other flesh eating animals. When the deer is over-hunted, there are more predators compared to prey. This leads to a serious imbalance and a high level of competition for the scarce prey.
Q1; ___________ have almost half a set of electrons in the outer most energy level.
1- metalloids
2- metals
3- nonmetals
Q2;________ are known to be gasses at room temperature.
1- nonmetals
2- metalloids
3- metals
Answers
Answer:
2 metalliods....
1 metals
Help me with this pls
Answers
2. eye color
3.hight
4. the weather
5. the day of the week
That’s all I could really think of. Hope it helps!
please helppp!!
How do ion charges differ
for the fourth main group
column and the transition
metals?
Answers
Answer:
How do ion charges differ for the fourth main group column and the transition metals? Do not have common charges. Transition metals tend to form positive ions, but the number of electrons that are lost varies. Describe how atoms with a large difference in electronegativity form ionic bonds.
Explanation: ?
What are two sources of phosphorous?
A. stratosphere
B. Erosion
C. Cows
D. Fossil fuels
E. Fertilizer
Answers
Answer:
A. stratosphere
E. Fertilizer
Explanation:
As stars get older, before they collapse, they throw off dust, heavy atoms and other materials an form a new
A. Constellation
B. Star
C. Rain cloud
D. Nebula
Answers
Answer:
B or D
Explanation:
.....I'm pretty sure I earned on some kids tv show
Identify processes that change matter to a liquid state
Answers
pls do this and don't just do it for the points pls help me I need it
Answers
Answer:
what do you want me to do my friend my best friend who is a dreamer
What is the charge of an electron?
Answers
Iron sulfide is a compound. It is made by heating a mixture of iron and sulfur.
Describe and explain the differences between iron sulfide and a mixture of iron and sulfur.
Answers
Answer:
Here are some of the differences between a mixture of iron and sulfur, and iron sulfide: the mixture can contain more or less iron, but iron sulfide always contains equal amounts of iron and sulfur. the iron and sulfur atoms are not joined together in the mixture, but they are joined together in iron sulfide.
Explanation:
Calculate the mass of 4 moles of CuCl2.
Answers
You would add the mm of Cu and of 2 chlorine’s to get (bc Cl2).
The molar mass means that per one mile that is how much mass so :
134.45 x 4 = 537.8
if you had a block square that weighed 5.00 grams what would be the length of each side
Answers
Answer:
[tex]l = 0.793[/tex] cm
Explanation:
Let us assume the density of block square [tex]10[/tex] g/cm³
As we know
Volume = [tex]\frac{Mass}{Density}[/tex]
Thus Volume of this block is equal to [tex]\frac{5}{10} = 0.5[/tex]
As we know volume of square block of side of length "l" is equal to [tex]l^3[/tex]
[tex]l^3 = 0.5[/tex]
[tex]l = 0.793[/tex] cm
