Answer:
Amount of toxic Ba²+ ingested by the patient = 0.404 mg
Explanation:
The solubility product constant, Ksp for barium sulfate is 1.1 x 10-¹⁰.
Considering the dissociation products of aqueous BaSO₄ solution:
BaSO₄ (aq) ⇄ Ba²+ (aq) + SO₄²- (aq)
Let the concentration of Ba²+ be x and that of SO₄²- be x as well since the mole ratio of the products is 1 : 1
Ksp = [Ba²+] × [SO₄²-]
Ksp = x × x = x²
x² = 1.1 x 10-¹⁰
x = 1.05 × 10-⁵ M
Therefore, the concentration of Ba²+ ions = 1.05 × 10-⁵ M
Volume of saturated barium sulfate ingested by the patient = 280 mL = 0.280 L
Number of moles of Ba²+ ions = molar concentration × volume
Number of moles of Ba²+ = 1.05 × 10-⁵ M × 0.280 L = 2.94 × 10-⁶ moles
Mass of Ba²+ ions = number of moles × molar mass
Molar mass of Ba²+ = 137.33 g/mol
Mass of Ba²+ = 2.94 × 10-⁶ moles × 137.33 g/mol = 4.04 × 10-⁴ g = 0.404 mg
Therefore, amount of toxic Ba²+ ingested by the patient = 0.404 mg
Sean plated an unknown metal onto his silver ring which initially weighed 1.4 g. He constructs an electrolytic cell using his ring as one of the electrodes. After running the cell, 0.022 moles of the unknown metal was plated onto his ring and the mass of the ring increased to 3.137 g. What is the atomic weight of the unknown metal in g/mol
Answer:
79 g/mol
Explanation:
Mass of unknown metal deposited = 3.137 g - 1.4 g = 1.737 g
Number of moles of metal deposited = 0.022 moles
Since;
Number of moles = reacting mass/molar mass
Molar mass = reacting mass/number of moles
Molar mass = 1.737 g/0.022 moles
Molar mass= 79 g/mol
Sometimes the oxidation state of an analyte must be adjusted before it can be titrated.
a. True
b. False
Answer:
Explanation:
True
When water reaches the metastable state, the phase of water will be?
Answer:
water, when the metastable state is reached, is cooled below the zero temperature. It freezes abruptly. this is called metastable. They are not at equilibrium per se; as at negative temperatures the only equilibrium state of water is ice.
Explanation:
the probability that it will rain tomorrow is 11/15. What is the probability that it will not rain ?
Answer:
4/15
Explanation:
15/15 - 11/15 = 4/15
If 11/15 is the probability that it'll rain tomorrow, then the rest should be the probability that it'll not rain tomorrow.
For a different reaction, the plot of the reciprocal of concentration versus time in seconds was linear with a slope of 0.056 M-1 s -1 . If the initial concentration was 2.2 M, calculate the concentration after 100 seconds. Show your work.
Answer:
[tex]C_t=0.165M[/tex]
Explanation:
From the question we are told that:
Slope [tex]K=0.056 M-1 s -1[/tex]
initial Concentration [tex]C_1=2.2M[/tex]
Time [tex]t=100[/tex]
Generally the equation for Raw law is mathematically given by
[tex]\frac{1}{C}_t=kt+\frac{1}{C}_0[/tex]
[tex]\frac{1}{C}_t=0.056*100+\frac{1}{2.2}_0[/tex]
[tex]C_t=0.165M[/tex]
The second-order reaction is the reaction that depends on the reactants of the first or the second-order reaction. The concentration after 100 seconds will be 0.165 M.
What is the specific rate constant?The specific rate constant (k) of the second-order reaction is given in L/mol/s or per M per s. It is the proportionality constant that gives the relation between the concentration and the rate of the reaction.
Given,
Slope (k)= 0.056 per M per s
Initial concentration of the reactant [tex](\rm C_{1})[/tex] = 2.2 M
Time (t) = 100 seconds
The concentration of the reaction after 100 seconds can be given by,
[tex]\rm \dfrac{1}{C_{t}} = kt + \dfrac{1}{C_{1}}[/tex]
Substitute values in the above equation:
[tex]\begin{aligned} \rm \dfrac{1}{C_{t}} &= 0.056 \times 100 + \dfrac{1}{2.02}\\\\&= 0.165 \;\rm M\end{aligned}[/tex]
Therefore, after 100 seconds the concentration is 0.165 M.
Learn more about the order of reaction here:
https://brainly.com/question/14810717
A central atom has two lone pairs on opposite sides and four single bonds. What is the molecule geometry of the result?
A. octahedral
B. tetrahedral
C. square planar
D. linear
The correct answer is C. square planar
According to the Valence Shell Electron Pair Repulsion Theory(VSEPR), The shape of a molecule depends on the number of electron pairs in the molecule.
VSEPR theory was first coined by Gillespie and Nyhlom in 1957 as an improvement over the Sidgwick - Powell theory.
According to this theory, the shape of a molecule is determined by the number of electron pairs that surround the valence shell of the central atom in the molecule. The electron pairs are positioned as far apart in space as possible to minimize repulsion of electron pairs.
However, the presence of lone pairs distorts the shape anticipated for the molecule on the basis of VSEPR.
For a molecule having six electron pairs, an octahedral geometry is expected(electron domain geometry). However, the presence of two lone pairs which are positioned at opposite side of the four single bonds leads to an observed square planar molecular geometry.
https://brainly.com/question/13591921
Answer:
square planar
Explanation:
What are the effects of global warming?
the effects are: temperature rises, water shortages, and increased fire threats
Consider an equilibrium (K1) that is established after 10 mL of compound A and 10 mL of compound B are mixed. Now, imagine the equilibrium (K2) where 1 mL of compound A is added to 100 mL of compound B. How are K1 and K2 related algebraically (read this question VERY carefully, at least one more time)
The equilibrium constant K₁ = Equilbrium constant K₂.
The equilibrium constant, K, of a reaction, is defined as:
"The ratio between concentration of products powered to their reaction quotient and concentration of reactants powered to thier reaction quotient".
For the reaction:
aA + bB ⇄ cC + dD
The equilibrium constant, K, is:
[tex]K = \frac{[C]^c[D]^d}{[A]^a[B]^b}[/tex]
Now, assuming the reaction of the problem is 1:1:
A + B ⇄ C + D
[tex]K = \frac{[C][D]}{[A][B]}[/tex]
The concentrations of the reactants are directly proportional to the volume added. Thus, we can assume that concentration = Volume. Replacing for K₁ and K₂:
[tex]K_1 = \frac{[C][D]}{[10mL][10mL]} = K_1 = \frac{[C][D]}{100mL^2}[/tex]
In the same way:
[tex]K_2 = \frac{[C][D]}{[1mL][100mL]} = K_2 = \frac{[C][D]}{100mL^2}[/tex]
Thus, we can say:
K₁ = K₂Learn more about chemical equilibrium in:
https://brainly.com/question/4289021?referrer=searchResults
A natural element consists of two isotopes: Cl-35 and Cl-37. The composition of these two isotopes differs by:
Answer:
There are no options in this question, however, it can be answered based on general understanding
- The number of neutrons each isotope contain
Explanation:
Isotopes are atoms of an element with the same atomic number or number of protons but different mass number/atomic masses. Since isotopes have same proton numbers, they have similar chemical behavior or identity.
However, difference in atomic mass or mass number of the same atomic number indicates that the number of neutrons each isotope contain differs from one another. Hence, in two isotopes of chlorine given as follows: Cl-35 and Cl-37, the NUMBER OF NEUTRONS in each atom differentiates the two isotopes.
Cl-35 contains 18 neutrons while Cl-37 contains 20 neutrons.
# of protons
# of neutrons
# of electrons
Atomic Number
Mass Number
18
17
35
17
37
6
8
6
6
15
Answer:
35
Explanation:
is the answer for your question
A chunk of a metal alloy displaces 0.58 L of water and has a mass of 2.9 kg. What is the density of the alloy in g/cm3?
Answer:
5g/cm3
Explanation:
firstly convert the litres and kilograms to grams and centimeters.
1l is equivalent to 1000cm3
0.58×1000
580cm3
and 1kg is equivalent to 1000g
2.9×1000
2900
then find the density by using the formula
density=mass/volume
=2900g/580cm3
=5g/cm3
I hope this helps
A wavelength of 489.2 nm is observed in a hydrogen spectrum for a transition that ends in the nf level of the Balmer series. What was ni for the initial level of the electron
Answer:
[tex]n_1=4[/tex]
Explanation:
From the question we are told that:
Wavelength [tex]\lambda=489.2 nm =>4.86*10^{-7}[/tex]
nf level= Balmer series
nf level= 2
Generally the equation for Wavelength is mathematically given by
[tex]\frac{1}{\lambda}=R[\frac{1}{nf^2}-\frac{1}{n_1^2}][/tex]
Where
[tex]R=Rydberg Constant[/tex]
[tex]R=1.097*10^7[/tex]
Therefore
[tex]\frac{1}{4.86*10^{-7}}=1.097*10^7[\frac{1}{2^2}-\frac{1}{n_1^2}][/tex]
[tex]n_1=4.0021[/tex]
[tex]n_1=4[/tex]
how is the Sun classified?
A as a giant star
B as a medium star
C as a white star as a neutron star
D as a white dwarf
Answer:
As a giant star.
Explanation:
A
. Which of the following statement is not related to a chemical reaction ? A. New substances are formed B. Atoms of the elements transform into atoms of other elements C. The properties of the new substances will be different D. There will be bond breaking and bond forming
Answer:
the answer should be B because elements do not tranform into other elements in a chemical reaction
am I right please?
How did Kepler's discoveries contribute to astronomy?
O They supported the heliocentric model.
O They established the laws of planetary motion.
O They explained how the Sun rises and sets.
O They made astronomy accessible to people who spoke Italian.
They made astronomy accessible to people who spoke italian
Answer:
"They established the laws of planetary motion"
Explanation:
Mr. Kepler was the astronomer who came up with the "Laws of Planetary Motion."
Two common methods to generate an aldehyde is by oxidation of an alcohol and through ozonolysis.
a. True
b. False
Answer:
a. True.
Explanation:
Only primary and secondary alcohols can oxidise to give an aldehyde. But a weak oxidizing agent must be used to prevent formation of a carboxylic acid or ketone.
weak oxidizing agents: Chromyl chloride, silver/oxygen/500°C
take an example of ethanol:
[tex]{ \bf{CH _{3} CH_{2}OH \: \: \frac{Ag/O_{2} }{500 \degree C} > \: \:CH _{3} CHO}}[/tex]
[tex]{ \sf{CH _{3} CHO \: \: is \: ethanal}} [/tex]
By ozonolysis:
Here, reactants are Ozone gas, Carbon tetrachloride at a temperature (<20°C), ethanoic acid, zinc and water.
take an example of propanol:
if it undergoes ozonolysis, it gives ethanal and methanal.
Answer:
A. True
Explanation:
Only primary and secondary alcohols can oxidise to give an aldehyde. But a weak oxidizing agent must be used to prevent formation of a carboxylic acid or ketone.
weak oxidizing agents: Chromyl chloride, silver/oxygen/500°C
take an example of ethanol:
By ozonolysis:
Here, reactants are Ozone gas, Carbon tetrachloride at a temperature (<20°C), ethanoic acid, zinc and water.
take an example of propanol:
if it undergoes ozonolysis, it gives ethanal and methanal.
Please help 15 points
What is the change in electrons for nitrogen in the
following reaction?
S + NO3 --> SO2 + NO
Nitrogen gained 4 electrons.
Because Nitrogen's redox number went from +6 to +2, it must have gained 4 electrons (-4) in order to achieve this number. Thus, Nitrogen is reduced.
A s'more requires 2 graham cracker squares, 1 marshmallow, and 3 chocolate pieces. If an entire chocolate bar contains 12 chocolate pieces, a marshmallow bag contains 40 marshmallows, and a graham cracker package contains 48 squares, how many s'mores can you make from 8 chocolate bars, one bag of marshmallows, and a package of graham crackers?
Explanation:
try 96 if that's not right let me know and I'll try to fix it
Answer:24
Explanation:
What is the maximum number of electrons in the following energy level?
n = 4
Answer: 32 electrons
Explanation:
a. You have a stock solution of 14.8 M NH3. How many milliliters of this solution should you dilute to make 1000.0 mL of 0.250 M NH3?
b. If you take a 10.0 mL portion of the stock solution and dilute it to a total volume of 0.500 L, what will be the concentration of the final solution?
Answer:A) V = 16.892 ml
Explanation:
M1 * V1 = M2 * V2
14.8 M * V1 =0.250 M * 1000 ml
V1 = 16.892 ml
a. The volume of 16.89 milliliters of the stock solution of 14.8 M should be diluted to make 1000.0 mL of 0.250 M.
b. The concentration of the final solution is 0.296 M.
What is the dilution law?The concentration or the volume of the concentrated or dilute solution can be calculated by using the equation:
M₁V₁ = M₂V₂
where M₁ and V₁ are the concentration and volume of the concentrated solution respectively and M₂ and V₂ are the concentration and volume of the dilute solution.
A stock solution is a solution that has a high concentration and that will be diluted to a low concentration by the addition of water in it.
Given, a stock solution of concentration, M₁ = 14.8 M
The concentration of the diluted solution, M₂ = 0.250 M
The volume of diluted solution, V₂ = 1000ml
Substitute the value of the molarity and volume in equation (1):
(14.8)× (V₁) = (1000) × (0.250)
V₁ = 16.89 ml
Similarly, for part (b): M₁ = 14.8 M, V₁ = 10 ml and V₂ = 0.5L = 500 ml
(14.8)× (10) = (500) × (M₂)
M₂ = 0.296 M
Learn more about dilution law, here:
https://brainly.com/question/15718488
#SPJ5
Benzoyl chloride undergoes hydrolysis when heated with water to make benzoic acid. Reaction scheme of benzoyl chloride with water and heat over the arrow, and benzoic acid and hydrochloric acid as products. Calculate the molar mass of the reactant and product. Report molar masses to 1 decimal place.
Answer:
The molar mass of benzoic acid is 122.1 g/mol
The molar mass of hydrochloric acid = 36.5 g/mol
Explanation:
Benzoyl chloride is an organic compound with the molecular formula C₆H₅COCl. It is an acyl chloride since is it an organic derivative of a carboxylic acid. Acyl chlorides have the general molecular formula, R-COCl, where R is a side chain.
The R group of benzoyl chloride is the benzyl group C₆H₅. It reacts with water (hydrolysis) to produce hydrochloric acid and benzoic acid. The equation of the reaction is given below:
C₆H₅COCl + H₂O → C₆H₅CO₂H + HCl
The molar mass of benzoic acid as well as of hydrochloric acid is calculated from the sum of the masses of the atoms of the elements present in the compound thus:
Molar mass of carbon = 12.0107 g
Molar mass of hydrogen = 1.00784 g
Molar mass of oxygen = 15.999 g
Molar mass of chlorine = 35.453 g
Molar mass of benzoic acid, C₆H₅CO₂H containing 7 moles of atoms of carbon, 6 moles of atoms of hydrogen and 2 moles of atoms of oxygen = 7 × 12.0107 + 6 × 1.00784 + 2 × 15.999 = 122.1 g
Therefore, the molar mass of benzoic acid is 122.1 g/mol
Molar mass of hydrochloric acid, HCl, containing 1 mole of atoms of hydrogen and 1 mole of atoms of chlorine = 1 × 1.00784 + 1 × 35.453 = 36.5 g
Therefore, the molar mass of hydrochloric acid = 36.5 g/mol
A number is three times the difference between twenty and the number. What is the number?
Answer:
the number is 7
Explanation:
"Three times" means multiply by 3
"Difference" means subtract
"Sum" means add
3(x - 7) = 23 - (3x + 2)
3x - 21 = 23 - 3x - 2
3x - 21 = 21 - 3x
6x = 42
x = 7
In the graphic, 195 represents the _______.
195 Pt
78
A. Atomic Mass
B. Atomic Number
C. Neutron Number
Answer:
ITS ANSWER IS
OPTION B. ATOMIC NUMBER
HI HAVE A NICE DAY
Define pressure. Group of answer choices force exerted by solids to the surrounding area force used to compress a gas force used to melt a solid force exerted per unit area by gas particles as they strike the surfaces around them force applied to a gas to condense it
Answer:
force exerted per unit area by gas particles as they strike the surfaces around them
Explanation:
According to the kinetic molecular theory, a gas is composed of molecules. The molecules of a gas are in constant random motion and collide frequently with each other as well as with the walls of the container.
Pressure is defined as force per unit area. The pressure of a gas is the force exerted per unit area by gas particles as they strike the surfaces around them hence the answer above.
Which of the following is an example of a physical, rather than a chemical, change?
Answer: The question is not clear
Explanation:
When hydrogen gas reacts with oxygen gas, water vapour is formed according to the
reaction 2H2 + O2 2H2O. If 3.00 mol of hydrogen gas react with 3.00 mol
of oxygen gas, which reactant will be the reactant in excess?
Explanation:
here's the answer to the question
Identify the true statements regarding hydrogen bonding. Select all that apply. Group of answer choices Hydrogen bonding occurs when a hydrogen atom is covalently bonded to an N, O, or F atom.
Answer:
True
Explanation:
Hydrogen bonding occurs when hydrogen is covalently bonded to a highly electronegative element such as N, O, or F.
Hydrogen bonding affects several physical properties of molecules in which it occur. For example, the high boiling point of water is caused by intermolecular hydrogen bonding irrespective of the low relative molecular mass of water.
The statement stating the presence of hydrogen bonding between the hydrogen and N, O, and F has been true.
Hydrogen bonding has resulted when the electrostatic interaction has been found in the atoms that have been more electronegative than the Hydrogen atoms.
The electrostatic force helps in attracting the atoms towards the hydrogen and thereby the hydrogen bonding takes place. It has been a weak force present in the molecules. The hydrogen bonding can be easily breakable.
For more information about hydrogen bonding, refer to the link:
https://brainly.com/question/10904296
what is the bond energy required to break one mole of carbon-carbon bonds
Answer:
100 kcal of bond energy
What does X represent in the following reaction?
239 239
93NP → 94Pu + X
A) a neutron
C) an alpha particle
B) a proton
D) a beta particle
Answer:
D. beta particle
Explanation:
Pu has 94 protons which is only one more than Np (93), that means beta decay. Atomic mass stays the same in beta decay. Beta is very small particle so atomic mass stays at 239.
The given reaction is an example of beta decay where the atomic number of the nuclei increases by one unit and mass number remains unchanged. Therefore, the particle X is a beta particle or an electron.
What is beta decay?Heavy unstable isotopes of atoms undergoes nuclear decay by the emission of charged particles such as alpha or beta particle. In alpha decay, the helium nuclei is emitted and in beta decay, electrons are emitted.
In alpha decay, the mass number of the nuclei decreases by 4 units and atomic number by 2 units. In beta decay, the mass number does not change but the atomic number increases by one unit.
Neptunium undergoes beta decay and forms the plutonium nuclei. Thus X is a beta particle. The reaction is written as follows:
[tex]\rm _{93} ^{239}Np \rightarrow _{94}^{239}Pu + _{-1}^{0}e[/tex]
To find more on beta decay, refer here:
https://brainly.com/question/25455333
#SPJ2
What volume of each solution contains 0.14 mol of KCl? Express your answer using two significant figures.
1.8 M KCl
Answer:
Solution given:
1 mole of KCl[tex]\rightarrow [/tex]22.4l
1 mole of KCl[tex]\rightarrow [/tex]74.55g
we have
0.14 mole of KCl[tex]\rightarrow [/tex]74.55*0.14=10.347g
74.55g of KCl[tex]\rightarrow [/tex]22.4l
10.347 g of KCl[tex]\rightarrow [/tex]22.4/74.55*10.347=3.11litre
volume of each solution contains 0.14 mol of KCl contain 3.11litre.
1 mol of any gas contains 22.4L of volume at STP
Moles of KCl=0.14Volume of KCl:-
0.14(22.4)3.14L