Plz!!!!Plz!!!!!help help

Explanation:

High carbon concentration in the deep ocean means increased absorption of carbon to the atmosphere resulting to even greater and harmful amounts of carbon in the atmosphere. Therefore we need to keep a close eye of the deep ocean in the quest to monitor and pump out excess carbon from this part of marine life.

The question is incomplete, the complete question is shown in the image attached to this answer

Answer:

1) K

2) F

3) Si

4) Br

Explanation:

If an element has a more negative value of electron affinity, then it has a greater ability to attract an electron.

In each of the following pairs of elements, one element has a more negative electron affinity for certain reasons.

Between K and Ca, the incoming electron in K goes into a 4s orbital which is lower in energy and more stable. For Ca, the electron goes into a 3d orbital which is more unstable.

Between Ne and F, Ne already has a filled outermost shell hence the incoming electron goes into the higher energy 3s level. In F, the electron goes into the 2p level and completes it. Hence F has a more negative electron affinity.

Let us recall that half filled and completely filled orbitals are exceptionally stable. Hence, the electron affinity of Si is more negative than that of P because in P, the electron goes into an exceptionally stable half filled orbital.

Recall that the more the value of Zeff, the more negative the electron affinity hence electron affinity increases across a period; hence, Br has a more negative value of electron affinity than Se.

Answer:

0.203 is the mean of the concentration of the HCl solution

Explanation:

You have 5 concentrations. The most appropiate result is the mean of those results. The mean is a statistical defined as the sum of each result divided by the total amount of results. For the results of the problem, the mean is:

0.210 + 0.204 + 0.201 + 0.202 + 0.197 = 1.014 / 5 =

Answer:

Magnesium.

Explanation:

Because it is in group II

Answer:

The Density Of Ar (g) At -11°C And 675 MmHg (R =0.08206 L·atm/mol·K, 1 Atm = 760mmHg).

Answer:

CO2

Explanation:

Carbon dioxide is a chemical compound that consists of two oxygen atoms and one carbon atom

Answer:

Option b.

Al < B < P < N

Explanation:

Electronegativity is the capacity of an atom to attract electrons.

Usually, if we look at the periodic table, the elements in the left are the ones with the least electronegativity, and as we go to the right, the electronegativity increases (this is not really exact)

There are a lot of tables of electronegativity that can be used here, we can find that:

element:    electronegativity:

    N                         3.04

    B                          2.04

    P                          2.19

    Al                          1.61

So, the order from least to greatest is:

Al, B, P, N

Then the correct option is:

b: Al < B < P < N

Answer:

5.38 L

Option D.

Explanation:

2 NaOH(s) + 2 Al(s) + 6 H₂O(l)   →  2 NaAl(OH)₄(s)  + 3 H₂(g)

We convert mass of Al to moles:

4.32 g . 1 mol /26.98g = 0.160 moles

As NaOH is in excess, aluminum is the limiting reactant.

We see stoichiometry, were ratio is 2:3.

2 moles of Al can produce 3 moles of hydrogen

Our 0.160 moles may  produce (0.160 . 3)/2 = 0.240 moles of H₂.

We know that 1 mol of any gas at STP conditions is contained in 22.4L

So let's make the conversion factor:

0.240 mol . 22.4L / 1mol = 5.38 L

Answer:

2.The reaction is third order overall

Explanation:

THIS ANSWER IS CORRECT

MARK ME AS BRAINLIEST

Answer:

Human life has become very simple by using organic chemicals. The importance of organic chemicals in the daily life and industrial area can be explained as follows. (i) Food Vitamins, proteins, sugar, flour, fats etc. ... (ii) Agriculture is an important place for organic chemical for the growth of agricultural production.

Answer:

somebody small boy is not w e a r d

z0 0m = 257 473 5835 p c:- 12 34

Answer:

Close to the calculated endpoint of a titration - Partially open

At the beginning of a titration - Completely open

Filling the buret with titrant - Completely closed

Conditioning the buret with the titrant - Completely closed

Explanation:

'Titration' is depicted as the process under which the concentration of some substances in a solution is determined by adding measured amounts of some other substance until a rection is displayed to be complete.

As per the question, the stopcock would remain completely open when the process of titration starts. After the buret is successfully placed, the titrant is carefully put through the buret in the stopcock which is entirely closed. Thereafter, when the titrant and the buret are conditioned, the stopcock must remain closed for correct results. Then, when the process is near the estimated end-point and the solution begins to turn its color, the stopcock would be slightly open before the reading of the endpoint for adding the drops of titrant for final observation.

Answer:

F. When everyone is together it gets hotter

Explanation:

Answer:

c. it lies near the equator

Answer:

10.10

Explanation:

Step 1: Write the basic dissociation reaction for pyridine

C₅H₅N(aq) + H₂O(l) ⇌ C₅H₅NH⁺(aq) + OH⁻(aq)      Kb = 1.9 × 10⁻⁹

Step 2: Calculate [OH⁻]

For a weak base, we will use the following expression.

[OH⁻] = √(Cb × Kb) = √(9.2 × 1.9 × 10⁻⁹) = 1.3 × 10⁻⁴ M

Step 3: Calculate pOH

We will use the definition of pOH.

pOH = -log [OH⁻] = -log 1.3 × 10⁻⁴ = 3.9

Step 4: Calculate pH

We will use the following expression.

pH = 14 - pOH = 14 - 3.9 = 10.10

Answer:

False

Explanation:

An object with a density greater than 1.00g/mL (greater than the density of water) will sink. An object with a density less than the density of water, will float.

If the water has a density of 1.00 g/mL. If you put an object that has a density of 0.79 g/mL into water, it will sink to the bottom, this statement is false.

The density of an actual content is its mass per unit volume. The most common symbol for density is d, but the Latin letter D can also be used.

Three of an object's most fundamental properties are mass, volume, and density. Mass describes how heavy something is, volume describes its size, and density is defined as mass divided by volume.

The density of something is a measure of how heavy it is in relation to its size. When an artifact is more dense than water, it plunges; when an object is less dense than water, it floats.

Density is a property of a substance that is independent of the amount of substance.

As in the given scenario, water is having density 1 g/mL and object in having density less then it so it will float on water.

Thus, the given statement is false as the material will not sink, rather it will float on water.

For more details regarding density, visit:

https://brainly.com/question/15164682

#SPJ2

Answer:

[tex]M_{a}[/tex] = 0.104 m

Explanation:

This expression is used to determine either the mass or volume of an acid or a base used during titration process.

So that;

[tex]M_{a}[/tex][tex]V_{a}[/tex] = [tex]M_{b}[/tex][tex]V_{b}[/tex]

[tex]M_{a}[/tex] is the mass of the acid

[tex]V_{a}[/tex] is the volume of the acid

[tex]M_{b}[/tex] is the mass of the base

[tex]V_{b}[/tex] is the volume of the base

Given that:

[tex]M_{a}[/tex] x 5.0 m l = 5.2 ml x 0.10 m

[tex]M_{a}[/tex] x 5.0 = 0.52 m

[tex]M_{a}[/tex] = [tex]\frac{0.52}{5.0}[/tex]

      = 0.104

[tex]M_{a}[/tex] = 0.104 m

The mass of the acid used is 0.104 m.

Explanation:

here are the answers. Note that because the pressure is constant, you can use Gay Lussac's formula

Answer: 3.4 × 10 -1 equal 33.5 cs. May I have brainiest? pls. (the -1 is to the power of the ten.

Answer:

See explanation

Explanation:

The chlorination of benzene occurs in the presence of a Lewis acid. A Lewis acid is a compound that can accept a lone pair of electrons.

The first step in the chlorination of benzene is the formation of the ion Cl^+ which attacks the benzene ring.

This ion is formed when the Cl2 molecule undergoes heterolytic fission assisted by FeCl3 to yield FeCl4^- and Cl^+.

The Cl^+ electrophile now attacks the benzene ring to yield chlorobenzene.

Answer:

qualatatiev is fs-hj_jakakak

Answer:

general formula RCOX, where R represents an alkyl or aryl organic radical group, CO ... represents a halogen atom such as chlorine ... loss of a hydroxyl group (-OH), viz, acetyl,. CH, CO- ..

Answer:

isn't it 0.998

Explanation:

cause 0.998 is in the same grams / mole. I don't get

A calorimeter has been filled with 75 mL of water. The number of grams of water is 74.85 grams.

A calorimeter is an instrument that is used to measure calorimetry. It is used to measure the heat of chemical reactions and physical and chemical changes.

Mass is the quantity of matter in a physical body. Volume is the space occupied by a three-dimensional object. Mass is the quantity of matter in a physical body. The product of the compound's molar mass and the substance's moles are defined as mass.

Given, that the volume of the water is 75 mL

The temperature of the water is 25 °C

The density of water is 0.998 g/mL

To calculate the mass, the volume is multiplied by density.

Mass = volume x density

putting the values in the formula

75 x  0.998 = 74.85 grams

Thus, the grams of water that have at 25°C is 74.85 grams.

To learn more about density, refer to the link:

https://brainly.com/question/26304205

#SPJ2

Answer:

C2H3O2

Explanation:

Empirical formula is defined as the simplest whole-number ratio of atoms present in a molecule. To solve this question we need to convert the percentage of each atom to moles using molar mass. With the moles of each atom we can find the ratio:

Moles C -Molar mass: 12.01g/mol-

40.68g * (1mol/12.01g) = 3.387 moles C

Moles H-Molar mass:1g/mol-:

5.12g * (1mol/1g) = 5.12 moles H

Moles O -Molar mass: 16g/mol-

54.19g * (1mol/16g) = 3.387 moles O

Ratio of atoms (Dividing in moles of C that are the lower number of moles):

C = 3.387 moles C / 3.387moles C = 1

H = 5.12moles H / 3.387moles C = 1.5

O = 3.387moles O / 3.387 moles C = 1

This ratio twice (To have only whole-numbers):

C = 2

H = 3

O = 2

Empirical formula of succinic acid:

Answer:

See explanation

Explanation:

It is possible to generate electricity through a chemical reaction in two ways;

I) use of a voltaic cell where spontaneous chemical processes produce electrical energy.

ii) use of an electrolytic cell where non spontaneous chemical processes produce electrical energy.

The chemical formula of ethane is C2H6

The balanced chemical equation for the combustion of ethane is as follows;

C2H6 + 7/2 O2 ------> 2CO2 + 3H2O

Answer:

Li(s) + H2O(l) -----> LiOH(aq) + H2(g)

Ca(s) + 2H2O(l) ---------------> Ca(OH)2(aq) + H2(g)

Explanation:

Metals react with water to yield the metal hydroxide and hydrogen gas as shown in the answer above.

The reaction equations were balanced, the number of atoms of each element on both side of the reaction equation is exactly the same.

This is the way to write a balanced reaction equation for the species shown in the question.

Answer: The molarity of an HCl solution is 0.218 M if 43.6 mL of a 0.125 M NaOH solution are needed to titrate a 25.0 mL sample of the acid.

Explanation:

Given: [tex]V_{1}[/tex] = 43.6 mL,      [tex]M_{1}[/tex] = 0.125 M

[tex]V_{2}[/tex] = 25.0 mL,        [tex]M_{2}[/tex] = ?

Formula used to calculate the concentration of acid is as follows.

[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]

Substitute the values into above formula.

[tex]M_{1}V_{1} = M_{2}V_{2}\\0.125 M \times 43.6 mL = M_{2} \times 25.0 mL\\M_{2} = 0.218 M[/tex]

Thus, we can conclude that the molarity of an HCl solution is 0.218 M if 43.6 mL of a 0.125 M NaOH solution are needed to titrate a 25.0 mL sample of the acid.

The molarity of the HCl solution used in the neutralization reaction has been 0.218 M.

The reaction of NaOH with HCl has been a neutralization reaction. The resultant will be salt and water.

In the reaction the molarity can be calculated as:

Molarity of HCl [tex]\rm[/tex][tex]\times[/tex] Volume of HCl = Molarity of NaOH

Given,

The volume of HCl solution = 25 ml

Molarity of NaOH = 0.125 M

Volume of NaOH solution = 43.6 ml

Substitute the values in the equation:

Molarity of HCl [tex]\times[/tex] 25 = 0.125 [tex]\times[/tex] 43.6

Molarity of HCl [tex]\times[/tex] 25 = 5.45

Molarity of HCl solution = [tex]\rm \dfrac{5.45}{25}[/tex]

Molarity of HCl solution = 0.218 M

The molarity of the HCl solution used in the neutralization reaction has been 0.218 M.

For more information about the molarity, refer to the link:

https://brainly.com/question/12127540

Answer:

10.1 h

Explanation:

Let's consider the reduction half-reaction of iron from an aqueous solution of iron (III) chloride.

Fe³⁺(aq) + 3 e⁻ ⇒ Fe(s)

We can calculate the time required to produce 5.00 moles of Fe using the following relationships.

[tex]5.00molFe \times \frac{3 mole^{-} }{1molFe} \times\frac{96486C}{1mole^{-} } \times \frac{1s}{40.0C} \times \frac{1h}{3600s} = 10.1 h[/tex]

Answer:

Option B. The reaction will shift to the left in the direction of the reactants.

Explanation:

The equation for the reaction is given below:

CO₂ + 2H₂O <=> CH₄ + O₂

Enthalpy change (ΔH) = +890 KJ

The reaction illustrated by the equation is endothermic reaction since the enthalpy change (ΔH) is positive.

Increasing the temperature of an endothermic reaction will shift the equilibrium position to the right and decrease the temperature will shift the equilibrium position to the left.

Therefore, decreasing the temperature of the system illustrated by the equation above, will shift the reaction to the left in the direction of the reactants.

Thus, option B gives the right answer to the question.