PLZ HELP!!! What mass of [tex]SrF_{2}[/tex] can be prepared from the reaction of 10.0g [tex]Sr(OH)_{2}[/tex] with excess HF? THANK U!!

Answer:

c

Explanation:

Answer:
B: They must be cooler than the air inside the house.

Explanation:

I got it right on edge!

answer:Collisions between gas particlCollisions between gas particles or collisions with the vessel walls are perfectly elastic.

explanation:As long as an ideal gas is maintained at a constant temperature, the average kinetic energy of the molecules is said to be constant. In fact, what we call the temperature of a body at the macroscopic scale is just a representation of the kinetic energy carried by its atoms or molecules as they vibrate inside the body.

Now, if the kinetic energy of this oxygen gas is constant, it is because the collisions between the particles are assumed to be perfectly elastic. No energy is lost during the collisions. The rationale behind this assumption is that the particles are very tiny.

The answer which corresponds best to the explanation above is b. Collisions between gas particles are elastic; there is no net gain or loss of kinetic energy.

Answer:

308.2 g of NH₃.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

3H₂ + N₂ —> 2NH₃

Next, we shall determine the mass of N₂ that reacted and the mass of NH₃ produced from the balanced equation. This can be obtained as follow:

Molar mass of N₂ = 2 × 14 = 28 g/mol

Mass of N₂ from the balanced equation = 1 × 28 = 28 g

Molar mass of NH₃ = 14 + (3×1)

= 14 + 3 = 17 g/mol

Mass of NH₃ from the balanced equation = 2 × 17 = 34 g

Summary:

From the balanced equation above,

28 g of N₂ reacted to produce 34 g of NH₃.

Finally, we shall determine the mass of NH₃ produced by the reaction of 253.8 g of N₂. This can be obtained as illustrated below:

From the balanced equation above,

28 g of N₂ reacted to produce 34 g of NH₃.

Therefore, 253.8 g of N₂ will react to produce = (253.8 × 34)/28 = 308.2 g of NH₃.

Thus, 308.2 g of NH₃ were obtained from the reaction.

 Upwelling is caused by the winds that on the oceans surface is the correct answer.

Ocean currents are water flow patterns that have an impact on climate zones and weather patterns all around the globe.

When winds blow they push the water from an area and to replace the displaced water water rises from beneath the surface and this process is called Upwelling.

Therefore Option C , Upwelling is caused by the winds that on the oceans surface is the correct answer.

To know more about Ocean Current :

https://brainly.com/question/20823678

#SPJ2

Answer:

1. 78.9g of CO

2. 104.9g Fe and 124.0g CO2

Explanation:

Based on the balanced reaction:

Fe2O3 (s) + 3CO (g) -> 2Fe(s) + 3CO2 (g)

1 mole of Fe2O3 reacts with 3 moles of CO to produce 2 moles of Fe and 3 of CO2

1. The moles of 0.150kg = 150g of Fe2O3 -Molar mass: are:

150g * (1mol / 159.69g) = 0.9393 moles Fe2O3

Moles CO:

0.9393 moles Fe2O3 * (3mol CO / 1mol Fe2O3) = 2.818 moles CO

Mass CO -Molar mass: 28.01g/mol-:

2.818 moles CO * (28.01g/mol) = 78.9g of CO

2. The moles of Fe produced are:

0.9393 moles Fe2O3 * (2mol Fe / 1mol Fe2O3) = 1.8786 moles Fe

Mass Fe -Molar mass: 55.845g/mol-:

1.8786 moles Fe * (55.845g/mol) = 104.9g Fe

The moles of CO2 produced are:

0.9393 moles Fe2O3 * (3mol CO2 / 1mol Fe2O3) = 2.818moles CO2

Mass CO2 -Molar mass: 44.01g/mol-:

2.818moles CO2 * (44.01g/mol) = 124.0g CO2

Answer:

Yes, because the water solvent is better

Explanation:

Hope this helps

The word equation that represents the violent reaction between sodium and water is as follows: sodium + water → sodium hydroxide + hydrogen.

A chemical reaction is the process, typically involving the breaking or making of interatomic bonds, in which one or more substances are changed into others.

According to this question, sodium (Na) and water (H2O) are involved in a chemical reaction to produce sodium hydroxide (NaOH) and hydrogen gas (H2).

Therefore, the word equation that represents the violent reaction between sodium and water is as follows: sodium + water → sodium hydroxide + hydrogen

Learn more about chemical reaction at: https://brainly.com/question/22817140

#SPJ1

Answer:

Given theoretical yield of NH3 is 945g.

The actual yield is 598g.

What is the %yield?

Explanation:

%yield of a chemical reaction can be calculated by using the formula:

[tex]%yield=\frac{actual yield}{theoretical yield} * 100[/tex][tex]\frac{actual yield}{theoretical yield} * 100[/tex]

Substitute the given values in this formula to get the %yield.

[tex]\frac{598g}{945g} * 100\\=63.3[/tex]

Hence, the %yield for the formation of ammonia is ---- 63.3.

Answer:

[tex]{ \bf{from \: ionic \: product \: of \: water : }} \\ { \boxed{ \tt{k _{w} = [H _{3} O {}^{ + } ][OH {}^{ - } ]}}} \\ \\ { \tt{1 \times {10}^{ - 14} = (1 \times {10}^{ - 5} ) [OH {}^{ - } ]}} \\ \\ { \tt{[OH {}^{ - } ] = 1 \times {10}^{ - 9} }} \: M[/tex]

A solution has an [H3O+] of 1 × 10−5 M the [OH−] of the solution will be 1 × 10−9 M and option C is correct.

The water is made up of H2O only and when the pH of it is 7 then the concentration of all the ions would be the same while dissociation the water will get dissociate into H+ ions and OH- ions.

The concentration of OH- ions will be

OH- = Kw {H3O+}

{H3O+} = 1 × 10−5 M.

Kw = 14

substituting the value in the equation,

OH = 14 { 1 × 10−5 M.}

OH = 1 × 10−9 M

Therefore, the solution has an [H3O+] of 1 × 10−5 M the [OH−] of the solution will be 1 × 10−9 M and option C is correct.

Learn more about  [OH−] of the solution, here:

https://brainly.com/question/10228714

#SPJ2

Answer:

everything can be found in the picture

Answer:

Gamma rays—3 and radio waves—2

Explanation:

hard time seeing question, but i believe it is Gamma rays—3 and radio waves—2

Answer:

wood being taken for manufacturing

Answer: The author used the word "conversely" because the first statement he made is in CONTRAST to the second statement he made.

Explanation:

Matter is made up of atoms or molecules that are in constant motion. The motion of these tiny particles ( molecules) gives the object energy. The movement of these molecules depends on the state of matter which includes

--> GASEOUS STATE: Here, the particles are completely free to move and are always in motion.

--> LIQUID STATE: particles in this state slide by one another and are always in motion.

--> SOLID STATE: particles in this state are held tightly together but are always in motion.

Also, the molecules in motion are greatly affected by temperature changes. Increase in temperature will cause the particles in the liquid to move faster. Such is seen when soup is heated, the molecules travel faster than before. But the OPPOSITE is seen in an ice cube. This is because the ice cube is in solid state and of a lower temperature.

Answer:

They grow slowly over time, they are made up of multiple organisms.

Explanation:

One polyp is one individual. A Coral is made up of several polyps. Each polyp is less than 1 centimeters but a coral is made of many polyp so the coral itself cant be 1 centimeters across.

Answer:

Waves carry energy from one place to another.

Because waves carry energy,some waves are used for communication,eg radio and television waves and mobile telephone signals.

Explanation:

i hope it helps

that's my answer

correct me if im wrong

Answer:

Which of the following substances are ionic?

Check all that apply.

AlCl3

MgI2

C2H5OH

NH3

Explanation:

An ionic substance is formed between a positively charged cation and a negatively charged anion.

Ionic substances are generally formed from metal and nonmetal atoms with the metal atoms forming the cations and the nonmetal atoms forming the anions.

Among the given substances,

MgI2 is an ionic substance.

Since Mg is the metal atom. It forms a cation.

I is a  nonmetal atom. It forms anion.

Hence,

MgI2 is an ionic substance.

Though AlCl3 looks like an ionic substance it is a covalent compound.

This is due to the high polarizability of [tex]Al^3+[/tex] ion.

The remaining two compounds do not contain any metal atoms.

So, ethanol and NH3 are not ionic compounds.

Answer:

MgI2

Answer:

The combination of the polymer opening up and the water molecules sticking to it make a solution of the hydrogel get thicker and more viscous (sticky). Disposable nappies make use of the ability of hydrogels to take up and retain water, even under pressure.

Explanation:

Answer:

200 mL of water is needed to make up a 6.00% (m/v) solution of copper (II) sulphate when 12.0 g of it will be added to water.

Explanation:

The solution is the result of the mixture between the solute, which is the substance that dissolves, and the solvent, which is the substance in which a solute dissolves. That is, a solution (or solution) is a mixture of two or more components, perfectly homogeneous since each component is intimately mixed with the other.

The concentration of solutions is the amount of solute contained in a given amount of solvent or solution. A unit of concentration is the percent weight to volume.

The percent weight to volume is the percentage ratio between the weight of the solute and the volume of the solution. It is calculated as:

[tex]Percent =\frac{mass of solute}{volume of solution} *100[/tex]

Mass is measured in grams, while volume is measured in mL.

In this case:

Replacing:

[tex]6=\frac{12 g}{volume of solution} *100[/tex]

Solving:

volume of solution*6= 12 g*100

[tex]volume of solution=\frac{12 g}{6} *100[/tex]

volume of solution= 200 mL

200 mL of water is needed to make up a 6.00% (m/v) solution of copper (II) sulphate when 12.0 g of it will be added to water

Answer:

The intermolecular forces between paraffin molecules are entirely due to dispersion forces, and are therefore size dependent.

Explanation:

Answer: The intermolecular forces between paraffin molecules are entirely due to dispersion forces, and are therefore size dependent.

Explanation:

The intermolecular forces between paraffin molecules are entirely due to dispersion forces, and are therefore size dependent. 103 Paraffin wax is soluble in: a) water; b) hexane; c) acetone; d) ethanol Is shopping bag (polyethylene)

hope it helps

Answer:

19.5g is the theoretical yield of alum

Explanation:

Based on the balanced reaction, 4 moles of sulfuric acid produce 2 moles of alum. To solve this question we need to find the moles of H2SO4. With these moles we can find the moles of alum and its mass assuming all sulfuric acid reacts producing alum.

Moles Sulfuric Acid:

8.3mL = 0.0083L * (9.9mol/L) = 0.08217 moles sulfuric acid

Moles Alum:

0.08217 moles sulfuric acid * (2mol KAl(SO4)2•12H2O / 4mol H2SO4) =

0.041085 moles KAl(SO4)2•12H2O

Mass Alum -Molar mass: 474.3884 g/mol-

0.041085 moles KAl(SO4)2•12H2O * (474.3884 g/mol) =

Answer:

true

Explanation:

because I'm smart yes yes

Answer:

Vaporization

Since the question does not specify what molecule is being acted upon by the increment in temperature, I'll assume it's water.

When first taken out of the fridge, water is in the form of ice, and it has not been affected by a change in temperature yet, so it's at the origin.

(origin = ice)

As you raise the temperature, however, the ice starts to melt, and melting occur during phase 2. You have to keep the temperature constant for the process to properly occur.

(phase 2 = melting)

After it finishes melting, the ice is now in it's liquid state, which is water. The temperature continues to rise in order to proceed to the next phase.

(2nd slope = water)

Lastly, Water is being vaporized during phase 4. Notice, the temperature is kept constant in order to allow the process to properly occur.

(phase 4 = vaporization)

Answer:

An atom of a group 17 element such as chlorine has seven valence electrons. It is “eager” to gain an extra electron to fill its outer energy level and gain stability. Group 16 elements with six valence electrons are almost as reactive for the same reason

Explanation: