PLZ HELP!!! QUESTIONS ARE BELOW!!! :D PLZ COMPLETELY ANSWER THE QUESTIONS WITH A GOOD ANSWER :)

Answer: The volume of the solution is 85.7 mL

Explanation:

Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:

[tex]\text{Molarity of solution}=\frac{\text{Given mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (mL)}}[/tex] .....(1)

We are given:

Molarity of solution = 0.600 M

Given mass of [tex]BaSO_4[/tex] = 12.00 g

We know, molar mass of [tex]BaSO_4=[(1\times 137.33)+(1\times 32.07)+(4\times 16)]=233.4g/mol[/tex]

Putting values in equation 1, we get:

[tex]0.600=\frac{12.00\times 1000}{233.4\times \text{Volume of solution}}\\\\\text{Volume of solution}=\frac{12.00\times 1000}{233.4\times 0.600}=85.68mL=85.7mL[/tex]

The rule of significant number that is applied for the problems having multiplication and division:

The least number of significant figures in any number of the problem determines the number of significant figures in the answer.

Here, the least number of significant figures is 3 that is determined by the number, 0.600. Thus, the answer must have these many significant figures only.

Hence, the volume of the solution is 85.7 mL

83.3% yield

Explanation:

First, we need to convert 240 g of [tex]Fe_{2}O_{3}[/tex] into moles:

[tex]240 \:g \:Fe_{2}O_{3} \:\times(\frac{1\:\text{mol}\:Fe_{2}O_{3}}{159.69\: \text {g}\:Fe_{2}O_{3}})[/tex]

[tex]=1.50 \:\text{mol}\:Fe_{2}O_{3}[/tex]

Next, find the theoretical Fe yield using molar ratios.

[tex]1.50 \: \text {mol} \: Fe_{2}O_{3}\: \times (\frac{2\: \text{mol} \: Fe}{1 \:\text{mol} \: Fe_{2}O_{3}})[/tex]

[tex] = 3.00 \: \text{mol} \: Fe[/tex]

Then convert this back into grams:

[tex]3.00 \: \text{mol} \:Fe \times (\frac{55.845 \: \text{g} \: Fe}{1 \: \text{mol} \: Fe}) = 168 \: \text{g} \: Fe[/tex]

Note that actual yield is only 140 g Fe so percentage yield is

[tex]\dfrac{140\:\text{g}\:Fe}{168\:\text{g}\:Fe} \times 100[/tex]%= 83.3%

83.3%

The answer is 83.3%

Answer:

Rare earth elements are lanthanum, cerium, praseodymium, neodymium, promethium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium, scandium, yttrium - that appear in low concentrations in the ground.

Explanation:

The rare earth elements (REE) are a set of seventeen metallic elements. These include the fifteen lanthanides on the periodic table plus scandium and yttrium. Rare earth elements are an essential part of many high-tech devices.

Answer:

C. Beta

Explanation:

Answer:

it holds reactant molecules in a good position for then to react

Answer:

D. It holds reactant molecules in a good position for them to react.

Explanation:

Got a 100 on e2020.

Answer:

Awnser is A

Explanation:

Answer:

Hello There!!

Explanation:

The answer is↬O A. A measurement indicating how acidic a solution is.

hope this helps,have a great day!!

~Pinky~

Answer:

c. nilai pH kurang dari 7

Explanation:

cuka adalah acid

nilai pH bagi acid adalah

antara 1 hingga 6

Answer:

Answer is A... Melting and freezing

Answer:

See explanation

Explanation:

Let us recall that the basic rule in writing balanced chemical reaction equations is that the number of atoms of each element on the right hand side of the reaction equation is the same of the number of atoms of the same element on the left hand side of the reaction equation.

The reaction of red hot iron and steam is written as follows;

3Fe + 4H2O → Fe3O4 + 4H2.

The decomposition reaction of ammonium dichromate is written as;

(NH4)2Cr2O7 → N2 + Cr2O3 + 4H2O

Reaction of aluminium, sodium hydroxide and water is as follows,

2Al + 2NaOH + 2H2O ----> 2NaAlO2 + 3H2

Reaction of potassium bicarbonate with sulphuric acid;

2KHCO3 + H2SO4 -------> K2SO4 + 2H2O + 2CO2

Reaction of zinc and sodium hydroxide is as follows;

Zn + 2NaOH→Na2ZnO2 + H2

Answer:

13924g/mol is the molar mass of the protein

Explanation:

What is the molar mass of the protein.

The osmotic pressure of a solution, π, is defined as:

π = c*R*T

Where π is osmotic pressure = 2.054torr* (1atm/760torr) = 2.70x10⁻³atm

c is molar concentration of the protein,

R is gas constant = 0.082atmL/molK

And T is absolute temperature = 298K

Solving the molar concentration:

c = π / RT

c = 2.70x10⁻³atm / 0.082atmL/molK*298K

c = 1.106x10⁻⁴ moles protein / L

The moles of protein in 150mL = 0.150L:

0150L * (1.106x10⁻⁴ moles protein / L) = 1.659x10⁻⁵ moles protein

The molar mass is the ratio of mass and moles:

0.231g / 1.659x10⁻⁵ moles protein =

Answer:

???what metal????????????

Answer:

Explanation:

A reaction rate is the measure of the change in concentration of the disappearance of reactants or the change in concentration of the appearance of products per unit time

Answer:

Tetrahedral. Tetra- signifies four, and -hedral relates to a face of a solid; “tetrahedral” literally means “having four faces. ” This shape is found when there are four bonds all on one central atom, with no lone electron pairs. In accordance with the VSEPR theory, the bond angles between the electron bonds are 109.5o ...

There are two characteristics of molecules, one is geometry and other is shape. Shape is excluding lone pair surrounding the central element and geometry is including the lone pair. Therefore, the geometry of given molecule is tetrahedral.

VSEPR stands for valence shell electron pair repulsions. VSEPR theory is used to predict the shape and geometry of molecules on the basis of valence electrons pairs that are present around the central element of the molecule.

According to VSEPR theory, Lone pair lone pair repulsion is greater than bond pair bond pair repulsion. There are so many limitations of VSEPR theory. There is a repulsion between bond pair electrons and lone pairs present on the central element.

A molecule has four bonded atoms around a central atom. The central atom does not have any lone pairs of electrons. The geometry of such molecule is Tetrahedral. Geometry does not include lone pair on central atom.

Therefore, the geometry of given molecule is tetrahedral.

To know more about VSEPR theory, here:

https://brainly.com/question/19582124

#SPJ6

Answer:

protons because they have the most positive charge

Answer:

Step 9

Explanation:

The reason i selected step 9, is if you take a look at the picture hes setting up a funnel,With filter paper and if you take a look at number ''9'' questions it says set up a funnel, filter paper and filter flask which is shown in the picture on top that's how i got my answer

Respuesta:

199.5 g

Explicación:

Paso 1: Escribir la reacción balanceada

2 Al + 3 H₂SO₄ ⇒ Al₂(SO₄)₃ + 3 H₂

Paso 2: Calcular la masa pura de 50 g  de Al

Aluminio tiene 10% de impurezas, es decir, 10% de 50 g = 5 g. Luego, tiene 50 g - 5 g = 45 g de Al puro.

Paso 3: Calcular la masa teórica de Al₂(SO₄)₃ obtenida a partir de 45 g de Al

La relación de masas de Al₂(SO₄)₃ a Al es 342:54.

45 g Al × 342 g Al₂(SO₄)₃/54 g Al = 285 g Al₂(SO₄)₃

Paso 4: Calcular la masa real de Al₂(SO₄)₃ obtenida

El rendimiento de la reacción es de 70%.

285 g × 70% = 199.5 g

Answer:

No observable change.

Explanation:

Copper renders dilute sulphuric acid passive, no reaction.

H2SO4+Cu-->CuSO4+H2

Explanation:

THIS IS THE CORRECT ANSWER

Answer:

6.3moles

Explanation:

The balanced equation of the reaction described above between aqueous magnesium chloride and sodium metal is as follows:

MgCl2(aq) + 2Na(s) → 2NaCl(aq) + Mg(s)

From the above equation, 2 moles of sodium metal (Na) produces 1 mole of Magnesium metal (Mg)

Hence, 12.6 mol of Na will produce (12.6/2) mol of Mg.

12.6/2 = 6.3moles of Mg metal.

Answer: The volume of the solution is 28.75 mL

Explanation:

Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:

[tex]\text{Molarity of solution}=\frac{\text{Given mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (mL)}}[/tex] .....(1)

Given values:

Molarity of copper nitrate = 0.560 M

Given mass of copper nitrate = 3.02 g

Molar mass of copper nitrate = 187.56 g/mol

Putting values in equation 1, we get:

[tex]0.560=\frac{3.02\times 1000}{187.56\times \text{Volume of solution}}\\\\\text{Volume of solution}=\frac{3.02\times 1000}{187.56\times 0.560}=28.75mL[/tex]

Hence, the volume of the solution is 28.75 mL

Answer: increasing the number of collisions between reactants

Explanation:

A reaction is possible due to collisions between the reactants to create products. If we increase the concentration of reactants then that means that we are increasing the molecules of the reactants which would give them more chances to collide and make products.

For instance, using a non-chemistry example, if there are few cars in a large city, the accidents there will be less because the cars will have such space that they wouldn't collide with each other. If the number of cars in the city is increased however, there is now less space and more chances for cars to collide.

Answer:

when d volume of a substance is high, the concentration is gonna b low...

Jus lyk putting much water in just a cube of sugar

Explanation:

So lower volume, higher concentration

D. 8

Hope this helps! :)

______________

Answer:

D: 8 neutrons would make it most stable

Answer:

Coke

Explanation:

A solid fuel formed by heating coal in the absence of air is coke. Coke is black colored, tough porous substance. It is pure carbon.

Answer:

Temperature.

Explanation:

Kinetic molecular theory of gases states that gas particles exhibit a perfectly elastic collision and are constantly in motion.

According to the kinetic-molecular theory, the average kinetic energy of gas particles depends on temperature.

This ultimately implies that, the average kinetic energy of gas particles is directly proportional to the absolute temperature of an ideal gas. Thus, an increase in the average kinetic energy of gas particles would cause an increase in the absolute temperature of an ideal gas.

Temperature can be defined as a measure of the degree of coldness or hotness of a physical object. It is measured with a thermometer and its units are Celsius (°C), Kelvin (K) and Fahrenheit (°F).

Answer:

A simple answer: Carnivores don't eat plants only flesh. So they would not need soil. But it would be hard for Carnivores to get energy because they get energy indirectly from the animals (herbivores) that they eat. How do they get the energy from a herbivore you might ask. Herbivores eat only plants and that gives the herbivore the plant's energy; but if the herbivore gets eaten, it is indirectly transferred into the Carnivore. Hope this helped!!

Carnivore = only feeds on flesh

Herbivore = eats only plants

Omnivore = eats plants and animals/flesh

Answer:

A) Q + XZ = X + QZ is a single displacement reaction.

B) Q + Z = QZ is a synthesis reaction

C) QT = Q + T is a decomposition reaction

D) QT + XZ = QZ + XT is double replacement reaction.

Explanation:

A) Q + XZ = X + QZ

This is a single displacement reaction because it is one in which one element is substituted for another one in a compound. In this case X is substituted for Q.

B) Q + Z = QZ

This is a synthesis reaction because Q and z combine to form a single product QZ.

C) QT = Q + T

This is a decomposition reaction because the compound QT breaks down to form 2 simpler substances Q and T.

D) QT + XZ = QZ + XT

Thus is a double replacement reaction because QT and XZ have exchanged cations to form new compounds QZ and XT