pls help 60 pts
screenshot, fill out, then screenshot . attach document to answer using the paperclip button

Based on the given question, the resistance will: increase with the increase in voltage.

The reason behind this is that resistance and voltage have a direct relationship. As the voltage increases, the resistance also increases. This can be explained by Ohm’s Law which states that V= IR where V is voltage, I is current and R is resistance. As per the second part of the question, it is implied that the resistance varies with temperature.

The resistance of any material depends upon temperature, and a rise in temperature increases the resistance of the material. The light bulb acts as a resistor, and its resistance will increase as the temperature increases due to an increase in the temperature of the filament of the bulb.

The resistance is directly proportional to the temperature of the bulb, and it is represented by the equation

R = R₀ (1 + αt),

where R is resistance, R₀ is the resistance at a particular temperature, α is the temperature coefficient of resistance, and t is the temperature difference in Celsius.

Therefore, based on the data provided, it can be concluded that resistance increases with the increase in temperature which results in the heating of the light bulb, which is a resistor.

To know more about resistance refer here:

https://brainly.com/question/29427458#

#SPJ11

Water droplets that act as prism are phenomenon known as : b) rainbow.

When light enters water droplet and is refracted, it is dispersed into its component colors due to difference in the index of refraction of each color of light. This results in band of colors in the shape of arc with red on outer edge and violet on inner edge, with other colors of spectrum in between. This is the same effect as prism which disperses light in the same way.

Rainbows appear in seven colors because water droplets break sunlight into seven colors of spectrum and you get the same result when sunlight passes through prism. Water droplets in the atmosphere act as prism though traces of light are very complex.

To know more about rainbow, refer

https://brainly.com/question/1550509

#SPJ1

The percent change in the kinetic energy of the system is [(0.5*(12100 + 4790)*1722) - 5.58 x 106] / (5.58 x 106) x 100% = 4.41%.

The 12100 kg railroad car is initially travelling at a speed of 19.0 m/s and has a kinetic energy of KE = 0.5*12100*1902 = 5.58 x 106 Joules. The 4790 kg load is dropped onto the car from rest, so its initial kinetic energy is 0.

When the load is dropped onto the car, the two objects collide and their velocities after the collision will be equal. Therefore, the final speed of both the railroad car and the load will be v = (12100*19 + 4790*0) / (12100 + 4790) = 17.2 m/s. The percent change in the kinetic energy of the system is [(0.5*(12100 + 4790)*1722) - 5.58 x 106] / (5.58 x 106) x 100% = 4.41%.

Learn more about change in kinetic energy: brainly.com/question/30499217

#SPJ11

Answer:

well first u divide the numbers

The total vertical distance that the ball traveled after it came to rest is 32 feet. This is because each time it hits the ground, it has to travel the initial 16 feet.

Given, a ball is dropped from a height of 16ft. When it hits the ground each time, it bounces back to a height of 8ft. Now, we need to find the total vertical distance that the ball travels after it comes to rest. After the first drop, the ball travels a total distance of 16ft + 8ft = 24ft. After the second drop, the ball travels a total distance of 8ft + 8ft = 16ft.

After the third drop, the ball travels a total distance of 8ft + 8ft = 16ft. After the fourth drop, the ball travels a total distance of 8ft + 8ft = 16ft.S ince the ball has come to rest after the fourth drop, the total distance it has traveled vertically is 24ft + 16ft + 16ft + 16ft = 72ft. The ball travels a total vertical distance of 72ft in four drops.

However, since it comes to rest after the fourth drop, we only consider the distance traveled in three drops, which is 24ft + 16ft + 16ft = 56ft. Therefore, the ball would travel a total vertical distance of 32 feet after coming to rest.

Learn more about distance and rates: https://brainly.com/question/24659604

#SPJ11

The dragster's change in velocity due to the parachute can be calculated using the kinematic equation:

Δv = aΔt

where Δv is the change in velocity, a is the acceleration, and Δt is the time interval during which the acceleration occurs. In this case, the dragster is initially travelling east, so its velocity is positive, and the parachute applies a force in the opposite direction, resulting in a negative acceleration.

Given that the acceleration is -10 m/s² (westward) and the time interval is 4.5 seconds, we can calculate the change in velocity as:

Δv = (-10 m/s²) x (4.5 s) = -45 m/s

Therefore, the dragster's change in velocity due to the parachute is -45 m/s (westward). This means that the dragster's velocity is reduced by 45 m/s in the westward direction over the 4.5-second interval during which the parachute is deployed.

To know more about velocity , visit :

https://brainly.com/question/17127206

#SPJ1

The change in velocity due to the parachute is -45 m/s east

What is velocity ?

Velocity is a vector quantity that describes the speed and direction of motion of an object. In other words, velocity is the rate at which an object changes its position in a specific direction.

Velocity is expressed in units of distance per time, such as meters per second (m/s) or kilometers per hour (km/h)

Velocity is different from speed, which is also a measure of the rate of motion but only describes how fast an object is moving, without taking into account the direction of motion.

we will use the formula :-

change in velocity = acceleration x time

where acceleration is the rate at which the dragster slows down, and time is the duration for which it slows down.

Here, the dragster is travelling east, and the parachute applies a force in the opposite direction (west), causing it to slow down. So, the acceleration is -10 m/s^2 (negative because it's in the opposite direction to the velocity).

The time for which the dragster slows down is 4.5 seconds.

Therefore, the change in velocity due to the parachute is:

change in velocity = acceleration x time

change in velocity = (-10 m/s^2) x (4.5 s)

change in velocity = -45 m/s east

Note that the velocity is negative because the dragster is slowing down, and it's still travelling east (i.e., in the positive direction).

To know more about velocity visit :-

https://brainly.com/question/80295

#SPJ1

The current flowing out of a resistor is typically smaller than the current flowing into it. Resistors do not actually slow down the flow of charge, they merely convert electrical energy into heat.

The statement that the current flowing out of a resistor is smaller than the current flowing into it is correct. This is because resistors slow down the flow of charge. The amount of current flowing through a resistor is determined by the amount of voltage across the resistor and the resistance of the resistor. When the voltage across the resistor increases, the current flowing through it also increases.

Conversely, when the resistance of the resistor increases, the current flowing through it decreases. Resistors are used to control the flow of current in electrical circuits. They are used in a variety of applications, such as in voltage dividers, filters, and voltage regulators.

For example, a voltage divider is a circuit that divides a voltage into two or more parts. A voltage divider is made up of two resistors in series, and the output voltage is taken across one of the resistors. The amount of voltage across the output resistor is determined by the values of the two resistors.

If the two resistors are equal, the output voltage will be half the input voltage. If the output resistor is smaller than the input resistor, the output voltage will be less than half the input voltage. Conversely, if the output resistor is larger than the input resistor, the output voltage will be greater than half the input voltage.

Learn more about Resistor:

https://brainly.com/question/14883923

#SPJ11

The proportional equation that matches the context of a 33-inch candle burning down in 12 hours is b = 2.75t.

A candle that is 33 inches long is called a 33-inch candle. Candles are a popular decorative item that is commonly used for lighting, as decoration for weddings, and parties, or to create an aromatic atmosphere. B represents the length of the candle that has burned away at any time given in hours, t.

To find the proportional equation for b in terms of t that matches the context of a 33-inch candle burning down in 12 hours, the following steps should be followed:

Identify the given informationThe length of the candle (l) = 33 inchesThe time taken for the candle to burn down (t) = 12 hours

Determine the rate of burning The rate of burning of the candle is given by l/t. Therefore, the rate of burning = 33/12 = 2.75 inches per hour.

The proportional equation for b in terms of t is given by b = rt where r is the rate of burning. Therefore, b = 2.75t.

To know more about proportional equation:https://brainly.com/question/21749206

#SPJ11

The volume of the gas varies inversely with pressure, and the correct answer is (b) P/3.

According to Boyle's Law, at a constant temperature, the volume of a gas is inversely proportional to its pressure. Mathematically, this can be expressed as:

PV = k

where P is the pressure of the gas, V is its volume, and k is a constant.

If we assume that the mass of the gas remains constant, then k is also constant. So we can write:

[tex]P_1V_1 = k and P_2V_2 = k[/tex]

where[tex]P_1 and V_1[/tex] are the initial pressure and volume, and [tex]P_2 and V_2[/tex] are the final pressure and volume.

If we divide these two equations, we get:

[tex]P_1V_1/P_2V_2 = 1[/tex]

Since[tex]V_1[/tex] is inversely proportional to [tex]P_1[/tex], we can write:

[tex]V_1 = k/P_1[/tex]

Similarly, [tex]V_2 = k/P_2.[/tex]

Substituting these values in the above equation, we get:

[tex](k/P_1)/(k/P_2) = 1[/tex]

Simplifying this, we get:

[tex]P_2/P_1 = V_1/V_2[/tex]

Since we are given that the temperature remains constant, we can assume that k is constant, and therefore:

[tex]V_1/P_1 = V_2/P_2[/tex]

If we let [tex]P_2 = 3P_1[/tex], then we get:

[tex]V_1/P_1 = V_2/(3P_1)[/tex]

Simplifying this, we get:

[tex]V_1/V_2 = 1/3[/tex]

for such more question on volume

https://brainly.com/question/14197390

#SPJ11

Hydroelectric dams generate electricity through water impoundment, in which dam operators control the rate of water flow to turbines.

c is the correct option.

Hydroelectric dams are dams used to produce electricity. The movement of water drives turbines, which power generators that generate electricity.

The movement of water, generated by gravity, is what drives turbines. Hydroelectric dams are the most widely used renewable energy source, accounting for approximately 16% of global electricity production.

Hydroelectric dams generate electricity through water impoundment, in which dam operators control the rate of water flow to turbines.

This is the process of using turbines that are powered by the movement of water that has been dammed to generate electricity.

Turbines are powered by water that has been dammed to generate electricity, which is then sent to a power station to be used.

The electricity generated from hydroelectric dams is clean and safe, making it an important part of the renewable energy mix. They are also an essential part of the global infrastructure because they provide reliable, low-cost power.

They also assist in the management of rivers, flood control, and irrigation systems in various parts of the world.

To know more about Hydroelectric dams: https://brainly.com/question/18776929

#SPJ11

Energy is being transported in the positive y direction by an electromagnetic wave. The magnetic field is in the positive x direction at one spot and one moment. At that precise moment, the electric field is oriented in the "negative z" direction.


The given electromagnetic wave is transporting energy in the positive y direction. At one point and one instant, the magnetic field is in the positive x direction. Now we have to find the direction of the electric field at that point and instant. According to the right-hand rule, when the magnetic field is directed towards the positive x-axis, the electric field will be directed downwards along the negative z-axis. Therefore, the electric field at that point and instant points in the negative z direction.

To know more about electromagnetic wave:https://brainly.com/question/75996

#SPJ11

An airplane flies due west at an airspeed of 425 mph and the wind is blowing from the northeast at 40 mph, the ground speed of the airplane is 385 mph, and the bearing of the airplane is 285°.

We can use the equation

GS = AS + (Wind x cos(Θ)),

Where GS is the ground speed, AS is the airspeed, and Θ is the angle between the wind and the heading of the airplane. the airspeed is 425 mph, the wind is blowing from the northeast at 40 mph, and the heading of the airplane is due west. The angle Θ is 90°. Plugging these values into the equation, we get

GS = 425 + (40 x cos(90°)) = 385 mph.

To calculate the bearing of the airplane, we can use the equation

Bearing = 180° - (Θ + (Wind ÷ AS) x 180°).

Θ is 90°, the wind is 40 mph, and the airspeed is 425 mph.

Plugging these values into the equation, we get

Bearing = 180° - (90° + (40 ÷ 425) x 180°) = 285°.

Hence , airplane flies due west at an airspeed of 425 mph and the wind is blowing from the northeast at 40 mph, the ground speed of the airplane is 385 mph, and the bearing of the airplane is 285°.

To know more about Ground speed please visit :

https://brainly.com/question/24208048

#SPJ11

Balanced net forces have equal and opposing forces that cancel each other out and provide a net force of zero, which does not alter the motion of an item.

An object's velocity remains constant and motion is unaltered when the net forces acting on it are balanced. This indicates that the thing is either stationary or moving continuously. When the forces exerted on an item are opposing in direction and of equal magnitude, they are said to be balanced forces. The forces in this situation cancel one another out, leaving a net force of zero. This can happen when one force is applied to an item and that object applies an equal and opposite force in the opposite direction to another object. It can also happen when two or more forces are applied in opposing directions and of equal magnitude. Understanding equilibrium and stability in physics requires a knowledge of the idea of balanced forces.

learn more about Balanced net forces here:

https://brainly.com/question/29769471

#SPJ4

2.1 As more resistors are added in parallel, the equivalent resistance approaches zero

2.2 Kirchhoff's loop rule is equivalent to the conservation of energy principle.

As more resistors are added in series, the equivalent resistance of the circuit approaches infinity. In contrast, as more resistors are added in parallel, the equivalent resistance approaches zero. This statement is TRUE. The equivalent resistance, Req, of a parallel combination of resistors is less than any of the resistors in the combination, while for a series combination it is equal to the sum of the resistances.

Kirchhoff's loop rule is equivalent to the conservation of energy principle. Kirchhoff's loop rule or Kirchhoff's voltage law (KVL) is a result of the conservation of energy principle. The principle of conservation of energy states that energy can neither be created nor destroyed, it can only be transformed from one form to another. In a closed loop, the total energy gained is equal to the total energy lost, according to the principle of conservation of energy.

Learn more about Kirchhoff's loop rule and equivalent resistance at : https://brainly.com/question/30580929

#SPJ11

Answer:

The power of water transferred each hour through a 500m high dam if 500m² are cleared every hour is approximately 4.41 GW

Explanation:

To answer this question, we need to know the density of water, the gravitational acceleration, and the efficiency of the dam. Let's assume that the density of water is 1000 kg/m³, the gravitational acceleration is 9.81 m/s², and the efficiency of the dam is 100%.

The power of water transferred each hour through the dam is given by the formula:

Power = Flow rate x Density x Gravity x Height x Efficiency

where Flow rate is the volume of water that passes through the dam each second, Density is the density of water, Gravity is the gravitational acceleration, Height is the height of the dam, and Efficiency is the efficiency of the dam.

First, let's calculate the flow rate:

Flow rate = Area x Velocity

where Area is the cleared area of 500m² and Velocity is the speed of water passing through the dam.

Assuming that the water is moving at a constant speed, we can use the formula:

Velocity = Height / Time

where Time is the time it takes for the water to pass through the dam.

Since the height of the dam is 500m and we want to know the power transferred each hour, we can convert the time to seconds as follows:

Time = 1 hour / 3600 seconds per hour = 0.000277778 hours

So, the velocity of the water is:

Velocity = 500m / 0.000277778 hours = 1,800,000 m/s

Now we can calculate the flow rate:

Flow rate = 500m² x 1,800,000 m/s = 900,000 m³/s

Finally, we can calculate the power of water transferred each hour through the dam:

Power = Flow rate x Density x Gravity x Height x Efficiency

Power = 900,000 m³/s x 1000 kg/m³ x 9.81 m/s² x 500m x 1

Power = 4,405,500,000 watts or approximately 4.41 GW

Therefore, the power of water transferred each hour through a 500m high dam if 500m² are cleared every hour is approximately 4.41 GW.

The block will be moving at 3.97 m/s 6 seconds after the pull is applied.

Given Mass of the block, m = 421 kg, Inclined angle, θ = 4.54°, Force applied, F = 3282 N, Coefficient of friction, μ = 0.47, Time, t = 6 s

Using Newton's second law of motion, F - μmg sin θ = ma

Where,
m = Mass of the block
g = Acceleration due to gravity
a = Acceleration of the block

Substituting the given values,

3282 - 0.47 × 421 × 9.81 × sin 4.54° = 421 × a
a = 0.6614 m/s²

Using kinematic equations of motion,

v = u + at

Where,
u = Initial velocity
v = Final velocity
a = Acceleration
t = Time

Since the initial velocity is zero, the above equation becomes
v = at

Substituting the values,
v = 0.6614 m/s² × 6 s
v = 3.97 m/s

Therefore, the block will be moving at 3.97 m/s 6 seconds after the pull is applied.

More on friction: https://brainly.com/question/29073383

#SPJ11

The kinetic energy of the object at its final position is 90.98 J.Given,Mass, m = 4.4 kg Initial position, r1 = (2 i + 5 j) m, Final position, r2 = (6 i − 2 j) m ,Initial velocity, u = 4.9 m/s ,Constant resultant force, F = (4 i − 3 j) N .To find the work done by the force,First, we need to find the displacement vector = r2 - r1= (6 i − 2 j) - (2 i + 5 j)= (6 - 2) i + (-2 - 5) j= 4 i - 7 j

Magnitude of the displacement vector,= √(4² + (-7)²)= √65 m Now, we can find the work done by the force,W = F.s= (4 i - 3 j) . (4 i - 7 j)= 4(4) + 3(7)= 37 J

Therefore, the work done by the force is 37 J.

To find the kinetic energy of the object at its final position,First, we need to find the final velocity of the object by using the work-energy principle.Initial kinetic energy, K1 = (1/2)mu²= (1/2) × 4.4 × (4.9)²= 53.98 J

Work done by the force, W = 37 JFinal kinetic energy, K2 = K1 + W= 53.98 + 37= 90.98 JTherefore, the kinetic energy of the object at its final position is 90.98 J.

For such more questions on displacement

https://brainly.com/question/28952425

#SPJ11

A survey was conducted at local colleges around Madison where 692 students were surveyed, and 421 replied that they were over 6 feet tall showing a standard error of 0.0084 in the average height of a college student.

The standard error is given by the formula given below:

[tex]$$SE= {s}/{\sqrt{n}}$$[/tex]

Where s is the standard deviation,

n is the sample size.

Now let us find out the standard deviation by using the formula given below:

[tex]$$s=\sqrt{\frac{(421-271.17)^2+(271.17-270)^2}{692-1}}$$[/tex]

After calculating we get that the standard deviation s is equal to $0.2208$.

Now let us plug the value of the standard deviation s and sample size n into the formula for standard error:

[tex]$$SE={s}/{\sqrt{n}}$$[/tex]

On substituting the respective values, we get [tex]$$SE={0.2208}/{\sqrt{692}}$$[/tex]

On solving, we get that the standard error is equal to 0.0084

Therefore, the standard error is 0.0084.

Learn more about standard error: https://brainly.com/question/14467769

#SPJ11

The mass of a particular bar of gold-pressed latinum on the moon is 100 grams.

Gold-pressed latinum (GPL) is a kind of currency in the Star Trek world. Latinum, a rare silver-colored liquid, is pressed between gold layers to make GPL, which is valued in the Federation as a rare and valuable resource. The value of GPL is measured in amounts of gold. It can be used in various types of exchange and trade.

The mass of a particular bar of gold-pressed latinum when it is brought to the moon is the same as its mass on Earth. The bar's mass will stay the same no matter where it is located because mass is a constant property of an object. Mass is a measure of an object's resistance to acceleration in response to a force. It is a measure of how much matter is contained in an object.

As a result, if an object has a mass of 100 grams on Earth, it will have the same mass on the moon or any other location in the universe. Therefore, the mass of a particular bar of gold-pressed latinum when it is brought to the moon is 100 grams.

To learn more about moon, click here:

https://brainly.com/question/398659

#SPJ11

A ball rolls across the floor, slowing down with a constant acceleration of magnitude a = 4.51 m/s2.

The ball has positive velocity v after rolling a distance x = 2.66 m across the floor.

To calculate the ball's initial speed v0 if

v = 11.17 m/s.

The initial velocity of the ball, v0 =?

The final velocity of the ball, v = 11.17 m/s

The acceleration of magnitude a = 4.51 m/s2

Distance travelled, x = 2.66 m

If an object has initial velocity v0, constant acceleration a, and travelled distance x, then its final velocity is given by:

v2 = v0² + 2ax

Here, the ball's initial velocity is v0, and its final velocity is v.

After substituting the given values, we have:

v2 = v0² + 2ax

=> (11.17)²

= v0² + 2(4.51)(2.66)

=> 124.57

= v0² + 25.39

=> v0² = 124.57 - 25.39

=> v0² = 99.18 => v0 = √99.18

=> v0 = 9.96 m/s

Hence, the initial velocity of the ball is v0 = 9.96 m/s.

To know more about velocity:

https://brainly.com/question/29519833

#SPJ11

The structure that would have helped to protect the brain from the external force when the rock hit Cesar are as follows: Dura mater and Cerebrospinal fluid.

What is the central nervous system? The central nervous system (CNS) is responsible for processing incoming stimuli from the peripheral nervous system and producing a coordinated response. It includes the brain and the spinal cord.

The brain is the largest component of the CNS, comprising 2% of the body's weight but consuming about 20% of its oxygen and nutrients. It consists of three main parts: the brainstem, the cerebellum, and the cerebrum.

The brainstem is responsible for regulating critical functions like respiration, circulation, and digestion; the cerebellum controls motor coordination, and the cerebrum is the area of the brain responsible for sensory perception, emotion, and movement.

What is external force? External forces, also known as contact forces, are forces that act on an object as a result of its interaction with its surroundings. Forces that do not require contact to take effect, such as gravitational and magnetic forces, are not considered external forces.

Examples of external forces are gravity, air resistance, tension, and friction. Dura mater and Cerebrospinal fluid as the structure that would have helped to protect the brain from the external force when the rock hit Cesar. When a rock hits Cesar, the external force created by it must be transferred to the skull, and ultimately the brain.

However, several protective features of the head help to reduce the severity of the impact. The brain is protected by two main structures: the dura mater and the cerebrospinal fluid.

The dura mater is the outermost layer of the meninges, which is a protective membrane covering the brain and spinal cord. It acts as a cushion, absorbing some of the external force generated by the impact.

Cerebrospinal fluid is a clear liquid that flows throughout the central nervous system, filling the space between the brain and the skull. It acts as a shock absorber, reducing the impact's intensity by distributing the force more evenly.

To know more about central nervous system, refer here:

https://brainly.com/question/29974261#

SPJ11#

The relative humidity of an air parcel will increase if any of the following actions are taken:

To understand this further, we can look at the formula for relative humidity, which is the amount of water vapor in the air divided by the amount of water vapor that can exist at a particular temperature. When the temperature is kept constant and the dew point increases, the amount of water vapor in the air increases, resulting in an increase in relative humidity.

The followings are the given options and the actions they will take that will cause the relative humidity of an air parcel to increase:

Option A: Keep the parcel's temperature constant and increase the parcel's dew point. This action would increase the RH of the air parcel because it will increase the quantity of water vapor in the air parcel. As the parcel's temperature is constant, the ability of the air to hold water vapor also remains constant.

Option B: Decrease the parcel's temperature and increase the parcel's dew point. This action would also increase the RH of the air parcel. As the temperature of the parcel decreases, the amount of moisture that the air can contain also decreases. When the dew point is raised, the quantity of water vapor in the air parcel rises relative to the amount it can carry.

Option C: Keep the parcel's temperature constant and keep the parcel's dew point constant. In this case, there will be no increase in RH because the quantity of water vapor in the air parcel will remain the same as the ability of the air to hold water vapor remains constant.

Option D: Increase the parcel's temperature and increase the parcel's dew point. Increasing the parcel's temperature will raise the ability of the air to hold water vapor, but it will not increase the amount of water vapor in the air parcel. As a result, the RH of the air parcel will decrease.

Option E: Keep the parcel's dew point constant and increase the parcel's temperature. This action will also decrease the RH of the air parcel as it will increase the amount of moisture that the air can hold. Thus, the relative humidity will decrease.

To know more about relative humidity follow

https://brainly.com/question/13275394

#SPJ11

The point on the x-axis between the two charges where the electric field is zero is 0.747 m, when the charges -2.1 μC and -5.6 μC are located at (-0.50 m , 0) and (0.50 m , 0), respectively.

An electric field is defined as the electric force per unit charge. It is a field of force surrounding electrically charged particles, such as electrons or protons in motion, that exerts force on surrounding matter. It is represented by the symbol E.

The electric field E at any point (x,y) on the x-axis due to the charge Q1 at (-0.50 m, 0) is

[tex]E1 = k * Q1 / r1^2[/tex]

where, k = Coulomb's constant = [tex]9 x 10^9 Nm^2/C^2[/tex]

Q1 = charge = -2.1 μC

r1 = distance between Q1 and

(x,y) = (0.50 + x) m

The electric field E at any point (x,y) on the x-axis due to the charge Q2 at (0.50 m, 0) is

[tex]E2 = k * Q2 / r2^2[/tex]

where,

Q2 = charge = -5.6 μC

r2 = distance between Q2 and (x,y) = (0.50 - x) m

The total electric field E at any point (x,y) on the x-axis due to both the charges is

[tex]E = E1 + E2 = k * Q1 / r1^2 + k * Q2 / r2^2[/tex]

[tex]E = k * (-2.1 * 10^-6) / (0.5 + x)^2 + k * (-5.6 * 10^-6) / (0.5 - x)^2[/tex]

At the point on the x-axis between the two charges where the electric field is zero,

[tex]E = 0k * (-2.1 * 10^-6) / (0.5 + x)^2 + k * (-5.6 * 10^-6) / (0.5 - x)^2 = 0[/tex]

Simplifying, we get [tex](0.5 + x)^2 / (0.5 - x)^2 = 2.667x^2 + 2.667x - 0.50 = 0[/tex]

Solving for x, we get

x = -1.74 m or

x = 0.747 m

We cannot have a negative value of x as the point has to be between the two charges. So, the location of the point where the electric field is zero is x = 0.747 m.

Learn more about electric field: https://brainly.com/question/14372859

#SPJ11

The electric potential from a certain point charge when the distance is halve for the same charge will be V/2. Thus, the correct option will be C.

According to the Coulomb's law, the electric field is the gradient of the electric potential. And, the electric potential V is given by:V = kQ/r, where Q is the charge, r is the distance between the charge and the point where the potential is being calculated, and k is Coulomb's constant. Here, the electric potential at a distance d from a certain point charge is V relative to infinity.

The electric potential (relative to infinity) at half the distance for the same charge is the distance r/2, so:

V' = kQ/r

2V' = kQ/(d/2)

V' = 2kQ/d

V' = V/2

Therefore, the electric potential at half the distance for the same charge is V/2.

Learn more about Electric potential here:

https://brainly.com/question/12645463

#SPJ11

Answer:

6° because some heat is released out of surrounding. if 100 over six which is equal to sixtenn point four

The speed of the block at the bottom of its slide is 16.4 m/s.

In the previous problem, the kinetic energy of the block was found to be 135 J.

The formula for kinetic energy is

KE = 1/2mv²,

Where:

Now we can use the same formula to find the velocity of the block at the bottom of its slide.

KE = 1/2mv²

We know that the mass of the block is 2 kg, and the kinetic energy at the end of the slide is 135 J.

KE = 135 Jm = 2 kg1/2mv² = 135 Jv² = 2(135 J) / 2 kgv² = 270 JV = sqrt(270 J) / 2 kgV = 16.4 m/s

Therefore, the speed of the block at the bottom of its slide is 16.4 m/s.

Learn more about kinetic energy: https://brainly.com/question/8101588

#SPJ11

The true strain at the onset of necking can be obtained from the Hollomon equation as follows: true strain = (K/S)^(1/n).

Here, K is the strength coefficient, S is the stress, and n is the strain hardening exponent. Thus, given the values of these parameters, we can calculate the true strain at the onset of necking.

The Hollomon equation is a mathematical expression for the true stress-true strain curve that relates the true stress to the true strain in a material. It is expressed as follows: true stress = K(true strain)^n. Here, K is the strength coefficient and n is the strain hardening exponent.

The true strain at the onset of necking is the strain at which the material starts to deform plastically instead of elastically. This can be obtained from the Hollomon equation by rearranging it to the form true strain = (K/S)^(1/n). Thus, given the values of the parameters K, S, and n, we can calculate the true strain at the onset of necking.

To know more about elastically click on below link:

https://brainly.com/question/14450755#

#SPJ11

Total work done is Wnet = 1/2mv₂² - 1/2mv₁²

Let the mass of the sled be m and the magnitude of the net force acting on the sled be Fnet .

The sled starts from rest. Consider an interval of time during which the sled covers a distance s and the speed of the sled increases from v₁ to v₂ . We will use this information to find the relationship between the work done by the net force (otherwise known as the net work) and the change in the kinetic energy of the sled.

Use W = F s cos (theta) to find the net work Wnet done on the sled. Express your answer in terms of some or all of the variables m ,v₁ and v₂.Using the work-energy principle, we can calculate the work done on an object in terms of its change in kinetic energy. Consider the sled being acted upon by a force Fnet.

W = ΔK is used to calculate the work done on the sled as it moves from rest to velocity v₁ and then to velocity v₂ over a distance s.

Considering the sled to be the system under study, we can write the net work done on the sled as Wnet = ΔK.Wnet = 1/2mv₂² - 1/2mv₁² = Fnet s cos θWnet = Fnet s cos θ = 1/2mv₂² - 1/2mv₁²

To know more about net force click on below link:

https://brainly.com/question/29261584#

#SPJ11

Explanation:

# Unmanaged population distribution

# lack of sanitation programs

# lack of awareness programs

# lack of implementation of policies and rules

# carelessness of people and government

# Unmanaged waste disposal